summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2022-12-31ARM: dts: aspeed: rainier,everest: Move reserved memory regionsAdriana Kobylak2-16/+17
[ Upstream commit e184d42a6e085f95f5c4f1a4fbabebab2984cb68 ] Move the reserved regions to account for a decrease in DRAM when ECC is enabled. ECC takes 1/9th of memory. Running on HW with ECC off, u-boot prints: DRAM: already initialized, 1008 MiB (capacity:1024 MiB, VGA:16 MiB, ECC:off) And with ECC on, u-boot prints: DRAM: already initialized, 896 MiB (capacity:1024 MiB, VGA:16 MiB, ECC:on, ECC size:896 MiB) This implies that MCR54 is configured for ECC to be bounded at the bottom of a 16MiB VGA memory region: 1024MiB - 16MiB (VGA) = 1008MiB 1008MiB / 9 (for ECC) = 112MiB 1008MiB - 112MiB = 896MiB (available DRAM) The flash_memory region currently starts at offset 896MiB: 0xb8000000 (flash_memory offset) - 0x80000000 (base memory address) = 0x38000000 = 896MiB This is the end of the available DRAM with ECC enabled and therefore it needs to be moved. Since the flash_memory is 64MiB in size and needs to be 64MiB aligned, it can just be moved up by 64MiB and would sit right at the end of the available DRAM buffer. The ramoops region currently follows the flash_memory, but it can be moved to sit above flash_memory which would minimize the address-space fragmentation. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220916195535.1020185-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: turris-omnia: Add switch port 6 nodePali Rohár1-1/+11
[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ] Switch port 6 is connected to eth0, so add appropriate device tree node for it. Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: turris-omnia: Add ethernet aliasesPali Rohár1-0/+6
[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ] This allows bootloader to correctly pass MAC addresses used by bootloader to individual interfaces into kernel device tree. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root PortPali Rohár1-3/+3
[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root PortPali Rohár2-5/+5
[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root PortPali Rohár1-1/+1
[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root PortPali Rohár2-12/+12
[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP") Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable") Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root PortPali Rohár1-1/+1
[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: dove: Fix assigned-addresses for every PCIe Root PortPali Rohár1-1/+1
[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ] BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself. Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodesJonathan Neuschäfer5-10/+10
[ Upstream commit ea3ce4cf076ba11bb591c8013c5315136cae52c8 ] The unit addresses do not correspond to the nodes' reg properties, because they don't have any. Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB") Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree") Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC") Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31arm: dts: spear600: Fix clcd interruptKory Maincent1-1/+1
[ Upstream commit 0336e2ce34e7a89832b6c214f924eb7bc58940be ] Interrupt 12 of the Interrupt controller belongs to the SMI controller, the right one for the display controller is the interrupt 13. Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: stm32: Fix AV96 WLAN regulator gpio propertyMarek Vasut1-1/+1
[ Upstream commit d5d577e3d50713ad11d98dbdaa48bb494346c26d ] The WLAN regulator uses 'gpios' property instead of 'gpio' to specify regulator enable GPIO. While the former is also currently handled by the Linux kernel regulator-fixed driver, the later is the correct one per DT bindings. Update the DT to use the later. Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96Marek Vasut1-1/+0
[ Upstream commit 3b835f1b8acef53c8882b25f40f48d7f5982c938 ] The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the stm32mp15xc.dtsi which should only be included in DTs of devices which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi enables CRYP block not present in the STM32MP15xA/D SoC . Fixes: 7e76f82acd9e1 ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ARM: dts: qcom: apq8064: fix coresight compatibleLuca Weiss1-1/+1
[ Upstream commit a42b1ee868361f1cb0492f1bdaefb43e0751e468 ] There's a typo missing the arm, prefix of arm,coresight-etb10. Fix it to make devicetree validation happier. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Fixes: 7a5c275fd821 ("ARM: dts: qcom: Add apq8064 CoreSight components") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221013190657.48499-3-luca@z3ntu.xyz Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-09Merge tag 'soc-fixes-6.1-6' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fix from Arnd Bergmann: "One more last minute revert for a boot regression that was found on the popular colibri-imx7" * tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "ARM: dts: imx7: Fix NAND controller size-cells"
2022-12-08Revert "ARM: dts: imx7: Fix NAND controller size-cells"Francesco Dolcini1-2/+2
This reverts commit 753395ea1e45c724150070b5785900b6a44bd5fb. It introduced a boot regression on colibri-imx7, and potentially any other i.MX7 boards with MTD partition list generated into the fdt by U-Boot. While the commit we are reverting here is not obviously wrong, it fixes only a dt binding checker warning that is non-functional, while it introduces a boot regression and there is no obvious fix ready. Fixes: 753395ea1e45 ("ARM: dts: imx7: Fix NAND controller size-cells") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/ Link: https://lore.kernel.org/all/20221205144917.6514168a@xps-13/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-01Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A set of clk driver fixes that resolve issues for various SoCs. Most of these are incorrect clk data, like bad parent descriptions. When the clk tree is improperly described things don't work, like USB and UFS controllers, because clk frequencies are wonky. Here are the extra details: - Fix the parent of UFS reference clks on Qualcomm SC8280XP so that UFS works properly - Fix the clk ID for USB on AT91 RM9200 so the USB driver continues to probe - Stop using of_device_get_match_data() on the wrong device for a Samsung Exynos driver so it gets the proper clk data - Fix ExynosAutov9 binding - Fix the parent of the div4 clk on Exynos7885 - Stop calling runtime PM APIs from the Qualcomm GDSC driver directly as it leads to a lockdep splat and is just plain wrong because it violates runtime PM semantics by calling runtime PM APIs when the device has been runtime PM disabled" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks ARM: at91: rm9200: fix usb device clock id clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()" dt-bindings: clock: exynosautov9: fix reference to CMU_FSYS1 clk: qcom: gdsc: Remove direct runtime PM calls clk: samsung: exynos7885: Correct "div4" clock parents
2022-11-24Merge tag 'v6.2-rockchip-dts32-1' of ↵Arnd Bergmann2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Disabling of the unreliable arm-global-timer on earliest Rockchip SoCs, due to its frequency being bound to the changing cpu clock. * tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
2022-11-23Merge tag 'v6.1-rockchip-dtsfixes1' of ↵Arnd Bergmann10-16/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes to make the automated binding tools happier (node-names, undocumented + unneeded properties) and fixes for non-working devices on some boards. * tag 'v6.1-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name arm64: dts: rockchip: fix ir-receiver node names ARM: dts: rockchip: fix ir-receiver node names arm64: dts: rockchip: fix adc-keys sub node names ARM: dts: rockchip: fix adc-keys sub node names arm: dts: rockchip: remove clock-frequency from rtc arm: dts: rockchip: fix node name for hym8563 rtc arm64: dts: rockchip: remove clock-frequency from rtc arm64: dts: rockchip: fix node name for hym8563 rtc arm64: dts: rockchip: lower rk3399-puma-haikou SD controller clock frequency arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series arm64: dts: rockchip: fix quartz64-a bluetooth configuration arm64: dts: rockchip: add enable-strobe-pulldown to emmc phy on nanopi4 arm64: dts: rockchip: remove i2c5 from rk3566-roc-pc arm64: dts: rockchip: Fix i2c3 pinctrl on rk3566-roc-pc arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc arm64: dts: rockchip: Drop RK3399-Scarlet's repeated ec_ap_int_l definition Link: https://lore.kernel.org/r/6274427.GXAFRqVoOG@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'am335x-pcm-953-regulators' of ↵Arnd Bergmann1-15/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Regulator changes for am335x-pcm-953 This is for deferred probe issue on am335x-pcm-953 sdhci-omap regulator. * tag 'am335x-pcm-953-regulators' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-pcm-953: Define fixed regulators in root node Link: https://lore.kernel.org/r/pull-1669036672-530717@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'imx-fixes-6.1-3' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.1, part 3: - Fix a small memory leak in mach-mxs code. - Correct PCIe pad configuration for imx8mp-evk board. - Fix ref/tcxo clock frequency property for imx6q-prti6q board. * tag 'imx-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties arm64: dts: imx8mp-evk: correct pcie pad settings ARM: mxs: fix memory leak in mxs_machine_init() Link: https://lore.kernel.org/r/20221119073812.GQ16229@T480 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-21Merge tag 'at91-fixes-6.1-2' of ↵Arnd Bergmann1-0/+9
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.1 #2 It contains: - fix UDC on at91sam9g20ek boards by adding vbus pin * tag 'at91-fixes-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl Link: https://lore.kernel.org/r/20221118131205.301662-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-19ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency propertiesFabio Estevam1-2/+2
make dtbs_check gives the following errors: ref-clock-frequency: size (9) error for type uint32 tcxo-clock-frequency: size (9) error for type uint32 Fix it by passing the frequencies inside < > as documented in Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-17ARM: at91: rm9200: fix usb device clock idMichael Grzeschik1-1/+1
Referring to the datasheet the index 2 is the MCKUDP. When enabled, it "Enables the automatic disable of the Master Clock of the USB Device Port when a suspend condition occurs". We fix the index to the real UDP id which "Enables the 48 MHz clock of the USB Device Port". Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: mturquette@baylibre.com Cc: sboyd@kernel.org Cc: claudiu.beznea@microchip.com Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 02ff48e4d7f7 ("clk: at91: add at91rm9200 pmc driver") Fixes: 0e0e528d8260 ("ARM: dts: at91: rm9200: switch to new clock bindings") Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114185923.1023249-2-m.grzeschik@pengutronix.de
2022-11-17ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrlMichael Grzeschik1-0/+9
We set the PIOC to GPIO mode. This way the pin becomes an input signal will be usable by the controller. Without this change the udc on the 9g20ek does not work. Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 5cb4e73575e3 ("ARM: at91: add at91sam9g20ek boards dt support") Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114185923.1023249-3-m.grzeschik@pengutronix.de
2022-11-17Merge tag 'imx-fixes-6.1-2' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.1, 2nd round: - Switch to usb-role-switch for fixing USB device mode on tqma8mqml-mba8mx board, so that Dual Role is fully functional. - A series from Marek Vasut to fix dt-schema warning caused by NAND controller size-cells. - Fix file permission of imx93-pinfunc header. - Enable OCOTP clock in soc-imx8m driver to fix a kexec kernel hang issue. * tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: Enable OCOTP clock before reading the register arm64: dts: imx93-pinfunc: drop execution permission arm64: dts: imx8mn: Fix NAND controller size-cells arm64: dts: imx8mm: Fix NAND controller size-cells ARM: dts: imx7: Fix NAND controller size-cells arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR Link: https://lore.kernel.org/r/20221116090402.GA1274@T480 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-15ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188Johan Jonker2-1/+7
The clock source and the sched_clock provided by the arm_global_timer on Rockchip rk3066a/rk3188 are quite unstable because their rates depend on the CPU frequency. Recent changes to the arm_global_timer driver makes it impossible to use. On the other side, the arm_global_timer has a higher rating than the ROCKCHIP_TIMER, it will be selected by default by the time framework while we want to use the stable Rockchip clock source. Keep the arm_global_timer disabled in order to have the DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14Merge tag 'at91-fixes-6.1' of ↵Arnd Bergmann2-1/+21
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.1 It contains: - signal name fix for a pin on SAMA7G5 - memory self-refresh fix for SAMA7G5 by avoid soft resetting AC DLL which can introduce glitches in RAM controller and lead to unexpected behavior - led support fix for lan966x-pcb8291 board by enabling sgpio node * tag 'at91-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: avoid soft resetting AC DLL ARM: dts: lan966x: Enable sgpio on pcb8291 ARM: dts: at91: sama7g5: fix signal name of pin PB2 Link: https://lore.kernel.org/r/20221110115411.180876-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-11ARM: dts: imx7: Fix NAND controller size-cellsMarek Vasut1-2/+2
The NAND controller size-cells should be 0 per DT bindings. Fix the following warning produces by DT bindings check: " nand-controller@33002000: #size-cells:0:0: 0 was expected nand-controller@33002000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) " Fix the missing space in node name too. Fixes: e7495a45a76de ("ARM: dts: imx7: add GPMI NAND and APBH DMA") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-09ARM: dts: am335x-pcm-953: Define fixed regulators in root nodeDominik Haller1-15/+13
Remove the regulators node and define fixed regulators in the root node. Prevents the sdhci-omap driver from waiting in probe deferral forever because of the missing vmmc-supply and keeps am335x-pcm-953 consistent with the other Phytec AM335 boards. Fixes: bb07a829ec38 ("ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board") Signed-off-by: Dominik Haller <d.haller@phytec.de> Message-Id: <20221011143115.248003-1-d.haller@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-11-01ARM: dts: ux500: Add trips to battery thermal zonesLinus Walleij9-0/+72
Recent changes to the thermal framework has made the trip points (trips) for thermal zones compulsory, which made the Ux500 DTS files break validation and also stopped probing because of similar changes to the code. Fix this by adding an "outer bounding box": battery thermal zones should not get warmer than 70 degress, then we will shut down. Fixes: 8c596324232d ("dt-bindings: thermal: Fix missing required property") Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Link: https://lore.kernel.org/r/20221030210854.346662-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-31ARM: dts: lan966x: Enable sgpio on pcb8291Horatiu Vultur1-0/+20
Enable sgpio node on pcb8291 as this is needed to be able to control the LEDs on this board. Otherwise the LEDs support on the board will not be available. On the other board pcb8309 the sgpio is already enabled because it needed to access the SFP ports. Fixes: 0b7baa1a307f ("ARM: dts: lan966x: add led configuration") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221026174303.702919-1-horatiu.vultur@microchip.com
2022-10-30ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node nameJohan Jonker1-1/+1
The lcdc1-rgb24 node name is out of line with the rest of the rk3188 lcdc1 node, so fix it. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/7b9c0a6f-626b-07e8-ae74-7e0f08b8d241@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-10-30ARM: dts: rockchip: fix ir-receiver node namesJohan Jonker1-1/+1
Fix ir-receiver node names on Rockchip boards, so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/ea5af279-f44c-afea-023d-bb37f5a0d58d@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-10-30ARM: dts: rockchip: fix adc-keys sub node namesJohan Jonker2-4/+4
Fix adc-keys sub node names on Rockchip boards, so that they match with regex: '^button-' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/7a0013b1-3a55-a344-e9ea-eacb4b49433c@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-10-30arm: dts: rockchip: remove clock-frequency from rtcSebastian Reichel5-5/+0
'clock-frequency' is not part of the DT binding and not supported by the Linux driver. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221024165549.74574-5-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-10-30arm: dts: rockchip: fix node name for hym8563 rtcSebastian Reichel5-5/+5
Fix the node name for hym8563 in all arm rockchip devicetrees. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-10-29ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QPPetr Benes2-0/+8
Fix our design flaw in supply voltage distribution on the Quad and QuadPlus based boards. The problem is that we supply the SoC cache (VDD_CACHE_CAP) from VDD_PU instead of VDD_SOC. The VDD_PU internal regulator can be disabled by PM if VPU or GPU is not used. If that happens the system freezes. To prevent that configure the reg_pu regulator to be always on. Fixes: 0de4ab81ab26 ("ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board") Cc: petrben@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Petr Benes <petr.benes@ysoft.com> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-29ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offsetTim Harvey2-2/+2
The GW5910 and GW5913 have a user pushbutton that is tied to the Gateworks System Controller GPIO offset 2. Fix the invalid offset of 0. Fixes: 64bf0a0af18d ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-24ARM: dts: at91: sama7g5: fix signal name of pin PB2Mihai Sain1-1/+1
The signal name of pin PB2 with function F is FLEXCOM11_IO1 as it is defined in the datasheet. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221017083119.1643-1-mihai.sain@microchip.com
2022-10-10Merge tag 'v6.1-p1' of ↵Linus Torvalds2-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
2022-10-07Merge tag 'mfd-next-6.1' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Fix 'mfd_of_node_list' OF node entry resource leak New Drivers: - Add support for Ocelot VSC7512 Networking Chip - Add support for MediaTek MT6370 subPMIC - Add support for Richtek RT5120 (I2C) PMIC New Device Support: - Add support for Rockchip RV1126 and RK3588 to Syscon - Add support for Rockchip RK817 Battery Charger to RK808 - Add support for Silergy SY7636a Voltage Regulator to Simple MFD - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI - Add support for Secure Update to Intel M10 BMC New Functionality: - Provide SSP type to Intel's LPSS (PCI) SPI driver Fix-ups: - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon - Unify / simplify; intel_soc_pmic_crc - Trivial reordering / spelling, etc; Makefile, twl-core - Convert to managed resources; intel_soc_pmic_crc - Use appropriate APIs; intel_soc_pmic_crc - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core - GPIOD conversion; htc-i2cpld, stmpe - Add missing header file includes; twl4030-irq - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152, aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon, qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063 Bug Fixes: - Properly check return values; sm501, htc-i2cpld - Repair Two-Wire Bus Mode; da9062-core - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788, lp8788-irq" * tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: syscon: Remove repetition of the regmap_get_val_endian() mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE power: supply: Add charger driver for Rockchip RK817 dt-bindings: mfd: mt6370: Fix the indentation in the example mfd: da9061: Fix Failed to set Two-Wire Bus Mode. mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe() dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018 mfd: sm501: Add check for platform_driver_register() dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 mfd: twl4030: Add missed linux/device.h header dt-bindings: mfd: dlg,da9063: Add missing regulator patterns dt-bindings: mfd: sprd: Add bindings for ums512 global registers mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc dt-bindings: mfd: syscon: Add rk3588 QoS register compatible mfd: stmpe: Switch to using gpiod API mfd: qcom-spmi-pmic: Add pm7250b compatible dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver mfd: intel-m10-bmc: Add d5005 bmc secure update driver dt-bindings: mfd: syscon: Drop ref from reg-io-width ...
2022-10-06Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds231-1773/+5743
Pull ARM devicetree updates from Arnd Bergmann: "Most of the changes fall into one of three categories: adding support for additional devices on existing machines, cleaning up issues found by the ongoing conversion to machine-readable bindings, and addressing minor mistakes in the existing DT data. Across SoC vendors, Qualcomm and Freescale stick out as getting the most updates, which corresponds to their dominance in the mobile phone and embedded industrial markets, respectively. There are 636 non-merge changeset in this branch, which is a little lower than most times, but more importantly we only add 36 machine files, which is about half of what we had the past few releases. Eight new SoCs are added, but all of them are variations of already supported SoC families, and most of them come with one reference board design from the SoC vendor: - Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55 cores. - TI AM62A is another member of the K3 family with Cortex-A53 cores, this one is targetted at Video/Vision processing for industrial and automotive applications. - NXP i.MX8DXL is another chip for this market in the ever-growing i.MX8 family, this one again with two Cortex-A35 cores. - Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are minor updates of R8A77951 and R8A77980, respectively. - Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the IPQ8064 chip, with minimally different features. The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close this time, but in the end did not make the cut. The new machines based on existing SoC support are fairly uneventful: - Sony Xperia 1 IV is a fairly recent phone based on Qualcomm Snapdragon 8 Gen 1. - Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and Grand Max. These are added for both 32-bit and 64-bit kernels, as they originally shipped running 32-bit code. - Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt. Mitchell - Three new machines based on Rockchips RK3399 and RK3566: Anberic RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab - Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S, i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board - Two development boards in the Microchip AT91 family: SAMA5D3-EDS and lan966x-pcb8290. - Minor variants of existing boards using Amlogic, Broadcom, Marvell, Rockchips, Freescale Layerscape and Socionext Uniphier SoCs" * tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits) Revert "ARM: dts: BCM5301X: Add basic PCI controller properties" ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ...
2022-10-05Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"Arnd Bergmann1-12/+0
Adding the #address-cells/#size-cells properties without also adding the other required properties for PCI nodes causes new build warnings from dtc that now show up everywhere, rather than just while verifying the yaml bindings: arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' Revert it for now. Fixes: 61dc1e3850a6 ("ARM: dts: BCM5301X: Add basic PCI controller properties") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-04Merge tag 'samsung-dt-dt64-6.1-2' of ↵Arnd Bergmann3-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM and ARM64 changes for v6.1 Late cleanup and fixes for Samsung DTS: 1. Fix polarity of pins: - enable GPIO of NFC chip in Exynos5433 TM2 boards, - vbus GPIO of EHCI in Exynos4412 Origen board. 2. Correct name of pin configuration nodes - redundant "pins" in the name (no functional impact). * tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-30ARM: dts: s5pv210: correct double "pins" in pinmux nodeKrzysztof Kozlowski2-3/+3
Drop second "pins" suffix from pin configuration/mux nodes. Link: https://lore.kernel.org/r/20220926125824.477920-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-30ARM: dts: exynos: fix polarity of VBUS GPIO of OrigenDmitry Torokhov1-1/+1
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when trying to power up the bus, therefore the GPIO in DTS must be marked as "active high". This will be important when EHCI driver is converted to gpiod API that respects declared polarities. Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-11/+16
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28Merge branch 'uniphier/dt' into arm/dtArnd Bergmann13-136/+345
Updates from Kunihiko Hayashi via email: "Update devicetree sources for UniPhier armv8 SoCs to remove dtschema warnings, add support existing features that haven't yet been described, and replace constants with macros." * uniphier/dt: arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ARM: dts: uniphier: Rename usb-glue node for USB3 to usb-controller ARM: dts: uniphier: Rename usb-phy node for USB2 to usb-controller ARM: dts: uniphier: Rename pvtctl node to thermal-sensor
2022-09-28arm64: dts: uniphier: Add USB-device support for PXs3 reference boardKunihiko Hayashi1-0/+10
PXs3 reference board can change each USB port 0 and 1 to device mode with jumpers. Prepare devicetree sources for USB port 0 and 1. This specifies dr_mode, pinctrl, and some quirks and removes nodes for unused phys and vbus-supply properties. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042321.4817-8-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 05:02:43 +0300