summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2022-01-16ARM: dts: exynos: Fix BCM4330 Bluetooth reset polarity in I9100Paul Cercueil1-1/+1
commit 9cb6de45a006a9799ec399bce60d64b6d4fcc4af upstream. The reset GPIO was marked active-high, which is against what's specified in the documentation. Mark the reset GPIO as active-low. With this change, Bluetooth can now be used on the i9100. Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2") Cc: stable@vger.kernel.org Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211031234137.87070-1-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11ARM: dts: gpio-ranges property is now requiredPhil Elwell2-0/+4
[ Upstream commit c8013355ead68dce152cf426686f8a5f80d88b40 ] Since [1], added in 5.7, the absence of a gpio-ranges property has prevented GPIOs from being restored to inputs when released. Add those properties for BCM283x and BCM2711 devices. [1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29ARM: dts: imx6qdl-wandboard: Fix Ethernet supportMartin Haaß1-0/+1
[ Upstream commit 39e660687ac0c57499134765abbecf71cfd11eae ] Currently, the imx6q-wandboard Ethernet does not transmit any data. This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs"). Fix it by describing the qca,clk-out-frequency property as suggested by the commit above. Fixes: 77591e42458d ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description") Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad nameFabio Estevam1-1/+1
commit 737e65c7956795b3553781fb7bc82fce1c39503f upstream. According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may have the ESAI_TX0 functionality, not ESAI_T0. Also, NXP's i.MX Config Tools 10.0 generates dtsi with the MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly. There are no devicetree users in mainline that use the old name, so just remove the old entry. Fixes: c201369d4aa5 ("ARM: dts: imx6ull: add imx6ull support") Reported-by: George Makarov <georgemakarov1@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22ARM: socfpga: dts: fix qspi node compatibleDinh Nguyen7-8/+8
[ Upstream commit cb25b11943cbcc5a34531129952870420f8be858 ] The QSPI flash node needs to have the required "jedec,spi-nor" in the compatible string. Fixes: 1df99da8953 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: bcm2711: Fix PCIe interruptsFlorian Fainelli1-1/+7
[ Upstream commit 98481f3d72fb88cb5b973153434061015f094925 ] The PCIe host bridge has two interrupt lines, one that goes towards it PCIE_INTR2 second level interrupt controller and one for its MSI second level interrupt controller. The first interrupt line is not currently managed by the driver, which is why it was not a functional problem. The interrupt-map property was also only listing the PCI_INTA interrupts when there are also the INTB, C and D. Reported-by: Jim Quinlan <jim2101024@gmail.com> Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: BCM5301X: Add interrupt properties to GPIO nodeFlorian Fainelli1-0/+2
[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ] The GPIO controller is also an interrupt controller provider and is currently missing the appropriate 'interrupt-controller' and '#interrupt-cells' properties to denote that. Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: BCM5301X: Fix I2C controller interruptFlorian Fainelli1-1/+1
[ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ] The I2C interrupt controller line is off by 32 because the datasheet describes interrupt inputs into the GIC which are for Shared Peripheral Interrupts and are starting at offset 32. The ARM GIC binding expects the SPI interrupts to be numbered from 0 relative to the SPI base. Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT") Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: qcom: fix memory and mdio nodes naming for RB3011David Heidelberg1-3/+3
[ Upstream commit 14a1f6c9d8017ffbf388e82e1a1f023196d98612 ] Fixes warnings regarding to memory and mdio nodes and apply new naming following dt-schema. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flashLi Yang1-1/+1
[ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ] We cannot list all the possible chips used in different board revisions, just use the generic "jedec,spi-nor" compatible instead. This also fixes dtbs_check error: ['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: ls1021a: move thermal-zones node out of soc/Li Yang1-33/+33
[ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ] This fixes dtbs-check error from simple-bus schema: soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... } From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: omap: fix gpmc,mux-add-data typeRoger Quadros2-2/+2
[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ] gpmc,mux-add-data is not boolean. Fixes the below errors flagged by dtbs_check. "ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'" Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: BCM53016: Specify switch ports for Meraki MR32Christian Lamparter1-0/+22
[ Upstream commit 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ] the switch identifies itself as a BCM53012 (rev 5)... This patch has been tested & verified on OpenWrt's snapshot with Linux 5.10 (didn't test any older kernels). The MR32 is able to "talk to the network" as before with OpenWrt's SWITCHDEV b53 driver. | b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5 | libphy: dsa slave smi: probed | b53-srab-switch 18007000.ethernet-switch poe (uninitialized): | PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL) | b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. | Please migrate to PHYLINK! | DSA: tree 0 setup Reported-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: ux500: Skomer regulator fixesLinus Walleij1-4/+4
[ Upstream commit 7aee0288beab72cdfa35af51f62e94373fca595d ] AUX2 has slightly wrong voltage and AUX5 doesn't need to be always on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: NSP: Fix mpcore, mmc node namesMatthew Hagan1-2/+2
[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ] Running dtbs_check yielded the issues with bcm-nsp.dtsi. Firstly this patch fixes the following message by appending "-bus" to the mpcore node name: mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Secondly mmc node name. The label name can remain as is. sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$' Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: sunxi: Fix OPPs node nameMaxime Ripard3-6/+6
[ Upstream commit ffbe853a3f5a37fa0a511265b21abf097ffdbe45 ] The operating-points-v2 nodes are named inconsistently, but mostly either opp_table0 or gpu-opp-table. However, the underscore is an invalid character for a node name and the thermal zone binding explicitly requires that zones are called opp-table-*. Let's fix it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15Olivier Moysan1-4/+4
[ Upstream commit 1a9a9d226f0f0ef5d9bf588ab432e0d679bb1954 ] Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15. Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2. Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2 Fixes: dcf185ca8175 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: fix SAI sub nodes register rangeOlivier Moysan1-8/+8
[ Upstream commit 6f87a74d31277f0896dcf8c0850ec14bde03c423 ] The STM32 SAI subblocks registers offsets are in the range 0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR). The corresponding range length is 0x20 instead of 0x1c. Change reg property accordingly. Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHzMarek Vasut1-1/+1
[ Upstream commit 2012579b31293d0a8cf2024e9dab66810bf1a15e ] The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM, which causes additional signal delay. At 108 MHz, this delay triggers a sporadic issue where the first bit of RX data is not received by the QSPI controller. There are two options of addressing this problem, either by using the DLYB block to compensate the extra delay, or by reducing the QSPI bus clock frequency. The former requires calibration and that is overly complex, so opt for the second option. Fixes: 76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm: dts: omap3-gta04a4: accelerometer irq fixAndreas Kemnade1-1/+1
[ Upstream commit 884ea75d79a36faf3731ad9d6b9c29f58697638d ] Fix typo in pinctrl. It did only work because the bootloader seems to have initialized it. Fixes: ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: at91: tse850: the emac<->phy interface is rmiiPeter Rosin1-1/+1
[ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ] This went unnoticed until commit 7897b071ac3b ("net: macb: convert to phylink") which tickled the problem. The sama5d3 emac has never been capable of rgmii, and it all just happened to work before that commit. Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHYMarijn Suijten1-2/+2
[ Upstream commit 8ccecf6c710b8c048eecc65709640642e5357d6e ] According to YAML validation, and for a future patchset putting this xo_board reference clock to use as VCO reference parent, add the missing clock to dsi_phy0. Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: BCM5301X: Fix memory nodes namesRafał Miłecki11-11/+11
[ Upstream commit c5e1df3276d7a500678da9453be31a66ad115150 ] Thix fixes: arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']} arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-modeBastien Roucariès1-1/+1
[ Upstream commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 ] Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the wrong setting. Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board. Signed-off-by: Bastien Roucariès <rouca@debian.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210916081721.237137-1-rouca@debian.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27ARM: dts: spear3xx: Fix gmac nodeHerve Codina1-1/+1
[ Upstream commit 6636fec29cdf6665bd219564609e8651f6ddc142 ] On SPEAr3xx, ethernet driver is not compatible with the SPEAr600 one. Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and needs some driver tuning compare to SPEAr600. The v3.40 IP support was added to stmmac driver and this patch fixes this issue and use the correct compatible string for SPEAr3xx Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27ARM: dts: at91: sama5d2_som1_ek: disable ISC node by defaultEugen Hristev1-1/+0
[ Upstream commit 4348cc10da6377a86940beb20ad357933b8f91bb ] Without a sensor node, the ISC will simply fail to probe, as the corresponding port node is missing. It is then logical to disable the node in the devicetree. If we add a port with a connection to a sensor endpoint, ISC can be enabled. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210902121358.503589-1-eugen.hristev@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27arm: dts: vexpress-v2p-ca9: Fix the SMB unit-addressRob Herring2-2/+2
[ Upstream commit 2e9edc07df2ec6f835222151fa4e536e9e54856a ] Based on 'ranges', the 'bus@4000000' node unit-address is off by 1 '0'. Link: https://lore.kernel.org/r/20210819184239.1192395-5-robh@kernel.org Cc: Andre Przywara <andre.przywara@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-20ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formattingNicolas Saenz Julienne1-1/+2
commit 13dbc954b3c9a9de0ad5b7279e8d3b708d31068b upstream. dtbs_check currently complains that: arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0" Unsurprisingly pci@0,0 is the right address, as illustrated by its reg property: &pcie0 { pci@0,0 { /* * As defined in the IEEE Std 1275-1994 document, * reg is a five-cell address encoded as (phys.hi * phys.mid phys.lo size.hi size.lo). phys.hi * should contain the device's BDF as 0b00000000 * bbbbbbbb dddddfff 00000000. The other cells * should be zero. */ reg = <0 0 0 0 0>; }; }; The device is clearly 0. So fix it. Also add a missing 'device_type = "pci"'. Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator statesStefan Wahren1-2/+2
commit b55ec7528879a822a4d350248daa04bbb27f25fd upstream. DT schema check complains at sd_io_1v8_reg about the following: [1800000, 1, 3300000, 0] is too long Additional items are not allowed (3300000, 0 were unexpected) So fix the states definition. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1628334401-6577-3-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ARM: dts: bcm2711: fix MDIO #address- and #size-cellsStefan Wahren1-2/+2
commit 2faff6737a8a684b077264f0aed131526c99eec4 upstream. The values of #address-cells and #size-cells are swapped. Fix this and avoid the following DT schema warnings for mdio@e14: #address-cells:0:0: 1 was expected #size-cells:0:0: 0 was expected Fixes: be8af7a9e3cc ("ARM: dts: bcm2711-rpi-4: Enable GENET support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1628334401-6577-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ARM: dts: bcm2711-rpi-4-b: Fix usb's unit addressNicolas Saenz Julienne1-2/+2
commit 3f32472854614d6f53b09b4812372dba9fc5c7de upstream. The unit address is supposed to represent '<device>,<function>'. Which are both 0 for RPi4b's XHCI controller. On top of that although OpenFirmware states bus number goes in the high part of the last reg parameter, FDT doesn't seem to care for it[1], so remove it. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633 Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-2-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-13ARM: dts: imx6qdl-pico: Fix Ethernet supportFabio Estevam1-0/+11
[ Upstream commit 450e7fe9b1b3c90eeed74a2fe0eeb13a7b57f3da ] Currently, it is no longer possible to retrieve a DHCP address on the imx6qdl-pico board. This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs"). Fix it by describing the qca,clk-out-frequency property as suggested by the commit above. Fixes: 98670a0bb0ef14bbb3 ("ARM: dts: imx6qdl: Add imx6qdl-pico support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-13ARM: dts: imx: Fix USB host power regulator polarity on M53MenloMarek Vasut1-2/+1
[ Upstream commit 5c187e2eb3f92daa38cb3d4ab45e1107ea34108e ] The MIC2025 switch input signal nEN is active low, describe it as such in the DT. The previous change to this regulator polarity was incorrectly influenced by broken quirks in gpiolib-of.c, which is now long fixed. So fix this regulator polarity setting here once and for all. Fixes: 3c3601cd6a6d3 ("ARM: dts: imx53: Update USB configuration on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-13ARM: dts: imx: Add missing pinctrl-names for panel on M53MenloMarek Vasut1-0/+1
[ Upstream commit c8c1efe14a4aadcfe93a158b1272e48298d2de15 ] The panel already contains pinctrl-0 phandle, but it is missing the default pinctrl-names property, so the pin configuration is ignored. Fill in the missing pinctrl-names property, so the pin configuration is applied. Fixes: d81765d693db6 ("ARM: dts: imx53: Update LCD panel node on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-13ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL referenceMarijn Suijten1-2/+2
[ Upstream commit f1db21c315f4b4f8c3fbea56aac500673132d317 ] The 28NM DSI PLL driver for msm8960 calculates with a 27MHz reference clock and should hence use PXO, not CXO which runs at 19.2MHz. Note that none of the DSI PHY/PLL drivers currently use this "ref" clock; they all rely on (sometimes inexistant) global clock names and usually function normally without a parent clock. This discrepancy will be corrected in a future patch, for which this change needs to be in place first. Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20210829203027.276143-2-marijn.suijten@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-13ARM: dts: qcom: apq8064: use compatible which contains chipidDavid Heidelberg1-2/+1
commit f5c03f131dae3f06d08464e6157dd461200f78d9 upstream. Also resolves these kernel warnings for APQ8064: adreno 4300000.adreno-3xx: Using legacy qcom,chipid binding! adreno 4300000.adreno-3xx: Use compatible qcom,adreno-320.2 instead. Tested on Nexus 7 2013, no functional changes. Cc: <stable@vger.kernel.org> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210818065317.19822-1-david@ixit.cz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-13ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probeMichal Vokáč1-0/+5
commit 9b663b34c94a78f39fa2c7a8271b1f828b546e16 upstream. Since the LED multicolor framework support was added in commit 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") LEDs on this platform stopped working. Author of the framework attempted to accommodate this DT to the framework in commit b86d3d21cd4c ("ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node") but that is not sufficient. A color property is now required even if the multicolor framework is not used, otherwise the driver probe fails: lp5562: probe of 1-0030 failed with error -22 Add the color property to fix this. Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: <stable@vger.kernel.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-13ARM: dts: omap3430-sdp: Fix NAND device nodeRoger Quadros1-1/+1
commit 80d680fdccba214e8106dc1aa33de5207ad75394 upstream. Nand is on CS1 so reg properties first field should be 1 not 0. Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-18ARM: tegra: tamonten: Fix UART pad settingAndreas Obergschwandtner1-7/+7
[ Upstream commit 2270ad2f4e123336af685ecedd1618701cb4ca1e ] This patch fixes the tristate and pullup configuration for UART 1 to 3 on the Tamonten SOM. Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18ARM: tegra: acer-a500: Remove bogus USB VBUS regulatorsDmitry Osipenko1-24/+1
[ Upstream commit 70e740ad55e5f93a19493720f4105555fade4a73 ] The configuration of USB VBUS regulators was borrowed from downstream kernel, which is incorrect because the corresponding GPIOs are connected to PROX_EN (A501 3G model) and LED_EN pins in accordance to the board schematics. USB works fine with both GPIOs being disabled, so remove the bogus USB VBUS regulators. The USB VBUS of USB3 is supplied from the fixed 5v system regulator and device-mode USB1 doesn't have VBUS switches. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18ARM: dts: imx53-ppd: Fix ACHC entrySebastian Reichel1-10/+13
[ Upstream commit cd7cd5b716d594e27a933c12f026d4f2426d7bf4 ] PPD has only one ACHC device, which effectively is a Kinetis microcontroller. It has one SPI interface used for normal communication. Additionally it's possible to flash the device firmware using NXP's EzPort protocol by correctly driving a second chip select pin and the device reset pin. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210802172309.164365-3-sebastian.reichel@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18ARM: dts: at91: use the right property for shutdown controllerNicolas Ferre7-7/+7
[ Upstream commit 818c4593434e81c9971b8fc278215121622c755e ] The wrong property "atmel,shdwc-debouncer" was used to specify the debounce delay for the shutdown controler. Replace it with the documented and implemented property "debounce-delay-us", as mentioned in v4 driver submission. See: https://lore.kernel.org/r/1458134390-23847-3-git-send-email-nicolas.ferre@atmel.com/ Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reported-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20210730172729.28093-1-nicolas.ferre@microchip.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18ARM: dts: stm32: Update AV96 adv7513 node per dtbs_checkMarek Vasut1-4/+2
[ Upstream commit 1e6bc5987a5252948e3411e5a2dbb434fd1ea107 ] Swap reg and reg-names order and drop adi,input-justification and adi,input-style to fix the following dtbs_check warnings: arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-justification: False schema does not allow ['evenly'] arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-style: False schema does not allow [[1]] arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:1: 'edid' was expected arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:2: 'cec' was expected Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKxMarek Vasut1-4/+4
[ Upstream commit 8aec45d7884f16cc21d668693c5b88bff8df0f02 ] Fix the following dtbs_check warning: cs42l51@4a: port:endpoint@0:frame-master: True is not of type 'array' cs42l51@4a: port:endpoint@0:bitclock-master: True is not of type 'array' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoMMarek Vasut1-4/+4
[ Upstream commit a79e78c391dc074742c855dc0108a88f781d56a3 ] Fix the following dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:frame-master: True is not of type 'array' arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:bitclock-master: True is not of type 'array' Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-18ARM: dts: qcom: apq8064: correct clock namesDavid Heidelberg1-3/+3
[ Upstream commit 0dc6c59892ead17a9febd11202c9f6794aac1895 ] Since new code doesn't take old clk names in account, it does fixes error: msm_dsi 4700000.mdss_dsi: dev_pm_opp_set_clkname: Couldn't find clock: -2 and following kernel oops introduced by b0530eb1191 ("drm/msm/dpu: Use OPP API to set clk/perf state"). Also removes warning about deprecated clock names. Tested against linux-5.10.y LTS on Nexus 7 2013. Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210707131453.24041-1-david@ixit.cz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15ARM: dts: at91: add pinctrl-{names, 0} for all gpiosClaudiu Beznea3-1/+63
commit bf781869e5cf3e4ec1a47dad69b6f0df97629cbd upstream. Add pinctrl-names and pinctrl-0 properties on controllers that claims to use pins to avoid failures due to commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") and also to avoid using pins that may be claimed my other IPs. Fixes: b7c2b6157079 ("ARM: at91: add Atmel's SAMA5D3 Xplained board") Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210727074006.1609989-1-claudiu.beznea@microchip.com Cc: <stable@vger.kernel.org> # v5.7+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-15ARM: dts: meson8b: ec100: Fix the pwm regulator supply propertiesAnand Moon1-2/+2
[ Upstream commit 72ccc373b064ae3ac0c5b5f2306069b60ca118df ] After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: 087a1d8b4e4c ("ARM: dts: meson8b: ec100: add the VDDEE regulator") Fixes: 3e7db1c1b7a3 ("ARM: dts: meson8b: ec100: improve the description of the regulators") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-4-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15ARM: dts: meson8b: mxq: Fix the pwm regulator supply propertiesAnand Moon1-1/+3
[ Upstream commit 632062e540becbbcb067523ec8bcadb1239d9578 ] After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. Add missing pwm-supply for regulator-vcck regulator node. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: dee51cd0d2e8 ("ARM: dts: meson8b: mxq: add the VDDEE regulator") Fixes: d94f60e3dfa0 ("ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-3-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply propertiesAnand Moon1-2/+2
[ Upstream commit 876228e9f935f19c7afc7ba394d17e2ec9143b65 ] After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: 524d96083b66 ("ARM: dts: meson8b: odroidc1: add the CPU voltage regulator") Fixes: 8bdf38be712d ("ARM: dts: meson8b: odroidc1: add the VDDEE regulator") Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [narmstrong: fixed typo in commit s/observer/observe/] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-2-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-25 09:13:45 +0300