summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2020-07-21ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrlPatrick Delaunay1-14/+14
Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins are not in BANK Z. Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrlErwan Le Ray1-0/+138
Adds usart2_pins_c, usart3_pins_b, usart3_pins_c and uart7_pins_c pins configurations in stm32mp15-pinctrl. - usart2_pins_c pins are connected to Bluetooth chip on dk2 board. - usart3_pins_b pins are connected to GPIO expansion connector on evx board. - usart3_pins_c pins are connected to GPIO expansion connector on dkx board. - uart7_pins_c pins are connected to Arduino Uno connector on dkx board. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-07-21ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrlPatrick Delaunay1-5/+4
Use tabs where possible and remove multiple blanks lines. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-06-15ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrlErwan Le Ray1-4/+4
Fix uart7_pins_a comments to indicate UART7 pins instead of UART4 pins. Fixes: bf4b5f379fed ("ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-06-15ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrlErwan Le Ray1-61/+61
Fix usart and uart nodes ordering. Several usart nodes didn't respect expecting ordering. Fixes: 077e0638fc83 ("ARM: dts: stm32: Add alternate pinmux for USART2 pins on stm32mp15") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-06-15ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157Erwan Le Ray1-0/+17
Sleep pin configuration is refined for low power modes: - "sleep" (no wakeup & console suspend enabled): put pins in analog state to optimize power - "idle" (wakeup capability): keep Rx pin in alternate function Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-14ARM: dts: stm32: Add missing pinctrl entries for STM32MP15Manivannan Sadhasivam1-0/+64
These pinctrl definitions will be used by Stinger96/IoTBox boards from Shiratech. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add alternate pinmux for SPI2 pinsMarek Vasut1-0/+15
Add another mux option for SPI2 pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add alternate pinmux for ADC pinsMarek Vasut1-0/+7
Add another mux option for ADC pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add alternate pinmux for FDCAN2 pinsMarek Vasut1-0/+20
Add another mux option for FDCAN2 pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add alternate pinmux for FDCAN1 pinsMarek Vasut1-0/+20
Add another mux option for FDCAN1 pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add alternate pinmux for I2C2 pinsMarek Vasut1-0/+17
Add another mux option for I2C2 pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15Marek Vasut1-0/+32
Add new mux option for SAI2 pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add alternate pinmux for LTDC pins on stm32mp15Marek Vasut1-0/+74
Add new mux option for LTDC pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add alternate pinmux for USART2 pins on stm32mp15Marek Vasut1-0/+24
Add mux option for USART2 pins, this is used on AV96 board. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add alternate pinmux for SDMMC pins on stm32mp15Marek Vasut1-0/+99
Add another mux option for SDMMC1_D123DIR direction pins, SDMMC2 pins 4..7, and SDMMC3 pins PD5_SDMMC3_D2 and PD0_SDMMC3_CMD, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add alternate pinmux for ethernet RGMII on stm32mp15Marek Vasut1-0/+51
Add another mux option for DWMAC RGMII, this is used on AV96 board. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-20ARM: dts: stm32: add STM32MP1-based Linux Automation MC-1 boardAhmad Fatoum1-0/+185
The Linux Automation MC-1 is a SBC built around the Octavo Systems OSD32MP15x SiP. The SiP features up to 1 GB DDR3 RAM, EEPROM and a PMIC. The board has eMMC and a SD slot for storage and GbE for both connectivity and power. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-20ARM: dts: stm32: use uniform node names for sleep pinctrl groupsAhmad Fatoum1-25/+25
While all sleep pinctrl group labels now follow a fixed naming scheme, node _names_ for these groups don't: - Some use ${dev}-[0-9], where the suffix is the normal group suffix + 1 - Some use ${dev}-sleep-[0-9], where suffix is the normal group suffix - The &ltdc node uses ${dev}-[a-z]-[0-9], where the letter matches the phandle and the number suffix is the normal group's suffix + 1 For uniformity, standardize on using ${dev}-[0-9]+ for all normal pinctrl groups and ${dev}-sleep-[0-9]+ for all sleep pinctrl groups. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-20ARM: dts: stm32: use uniform label names for sleep pinctrl phandlesAhmad Fatoum1-14/+14
Some labels follow the *_sleep_pins_* naming scheme, but some also use *_pins_sleep_*. Because most labels use the former and for uniformity with variants like sdmmc1_b4_pins_a and sdmmc1_dir_pins_a, adopt the *_sleep_pins_* scheme throughout. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-02-10ARM: dts: stm32: add USB OTG pinctrl to stm32mp15Amelie Delaunay1-0/+13
Add pinctrl definition for USB High-Speed OTG ID pin and USB Full-Speed OTG DP and DM lines that can be used on stm32mp15. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-02-10ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1Marek Vasut1-0/+13
Add pinmux for UART8. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-02-10ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1Marek Vasut1-0/+13
Add pinmux for USART3. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-02-10ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1Marek Vasut1-0/+20
Add pinmux entry for SAI2A with alternative pin configuration. This is useful in combination with sai2b_pins_b e.g. for codecs like SGTL5000. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-02-10ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1Marek Vasut1-0/+34
Add pinmux entry for ethernet0 RMII . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-12-09ARM: dts: stm32: adjust slew rate for Ethernet on stm32mp15Christophe Roullier1-2/+7
ETH_MDIO slew-rate should be set to "0" instead of "2". Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-12-09ARM: dts: stm32: Update stm32mp157 pinctrl filesAlexandre Torgue1-0/+1087
In order to cover the STM32MP15 SOCs family this commit updates pinctrl file names (group definition and packages files). This family includes: STM32MP151, STM32MP153 and STM32MP157. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-08 03:57:53 +0300