summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/ste-snowball.dts
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring1-657/+0
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-05-11ARM: dts: ste: align UART node name with bindingsKrzysztof Kozlowski1-3/+3
Bindings expect UART/serial node names to be "serial". Link: https://lore.kernel.org/r/20230123151519.369158-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-11-01ARM: dts: ux500: Add trips to battery thermal zonesLinus Walleij1-0/+8
Recent changes to the thermal framework has made the trip points (trips) for thermal zones compulsory, which made the Ux500 DTS files break validation and also stopped probing because of similar changes to the code. Fix this by adding an "outer bounding box": battery thermal zones should not get warmer than 70 degress, then we will shut down. Fixes: 8c596324232d ("dt-bindings: thermal: Fix missing required property") Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Link: https://lore.kernel.org/r/20221030210854.346662-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-12ARM: dts: ux500: Update AB850[05] nodesLinus Walleij1-4/+4
The new YAML device tree bindings gives new and proper names to several of the AB850[05] nodes and redefines the way we use numbering on PWMs to use reg. Update all the DTS nodes accordingly. Add the missing thermal node to the AB8505. Drop the debugfs nodes because these are not real devices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-05ARM: dts: ux500: Add battery thermal zones and NTCsLinus Walleij1-1/+18
Add the thermal zones and thermistors used by the battery charging code to the device tree so the charger code can look up and poll the thermal zone for battery temperature. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-14ARM: dts: ux500: Switch battery nodes to standardLinus Walleij1-0/+6
This force-converts the per-device battery node into the standard properties using "simple-battery" for the HREF machines and the corresponding Samsung battery for the mobile phones. This is fine to do since the battery data in the DTS files has never been deployed or used. In commit a1149ae97554 "ARM: ux500: Disable Power Supply and Battery Management by default" it was turned off and has not been switched back on since. In the meantime standardized bindings for batteries have appeared making the old AB8500 battery bindings obsolete. The battery node which is now in the middle of an included file is obviously a per-device piece of information so push this down to each board. The HREF machines all have the same battery and can share a single node in the HREF dtsi file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-30ARM: dts: ux500: Flag eMMCs as non-SDIO/SDLinus Walleij1-0/+2
We use the no-sdio and no-sd flags to indicate that these eMMCs are neither, so that the operating system can skip trying to identify them as SDIO or SD during boot, which just takes time. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Rename gpio-controller nodeSebastian Reichel1-1/+1
Rename the AB8500 gpio controller node from ab8500-gpio to ab8500-gpiocontroller, since -gpio is a common suffix for gpio consumers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-21Merge tag 'arm-dt-v5.12' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC devicetree updates from Arnd Bergmann: "After the last release contained a surprising amount of new 32-bit machines, this time two thirds of the code changes are for 64-bit. The usual updates to existing files include: - Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA, nomadik, stm32, Allwinner, TI Keystone - Support for additional devices on existing machines on Renesas, SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom, ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic, Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba - Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung, stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm, i.MX, Rockchip, ASpeed, Zynq Only three new SoCs this time, but a number of boards across: Renesas: - Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based) Intel SoCFPGA: - eASIC N5X board (N5X) ST-Ericsson Ux500: - Samsung GT-I9070 (Janice) phone (u8500) TI OMAP: - MYIR Tech Limited development board (AM335X) Allwinner/sunxi: - SL631 Action Camera (V3) - PineTab Early Adopter tablet (A64) Broadcom: - BCM4906 networking chip - Netgear R8000P router (BCM4906) AMLogic: - Hardkernel ODROID-HC4 development board (SM1) - Beelink GS-King-X TV Box (S922X) Qualcomm: - Snapdragon 888 / SM8350 high-end phone SoC - Qualcomm SDX55 5G modem as standalone SoC - Snapdragon MTP reference board (SM8350) - Snapdragon MTP reference board (SDX55) - Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094) - Alcatel Idol 3 phone (MSM8916) - ASUS Zenfone 2 Laser phone (MSM8916) - BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916) - OnePlus6 phone (SDM845) - OnePlus6T phone (SDM845) - Alfa Network AP120C-AC access point (IPQ4018) NXP i.MX6 (32-bit): - Plymovent BAS base system controller for filter systems (imx6dl) - Protonic MVT industrial touchscreen terminals (imx6dl) - Protonic PRTI6G reference board (imx6ul) - Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp) NXP i.MX8 (64-bit) - Beacon i.MX8M Nano development kit (imx8mn) - Boundary Devices i.MX8MM Nitrogen SBC (imx8mm) - Gateworks Venice i.MX 8M Mini Development Kits (imx8mm) - phyBOARD-Pollux-i.MX8MP (imx8mp) - Purism Librem5 Evergreen phone (imx8mp) - Kontron SMARC-sAL28 system-on-module(imx8mp) Rockchip: - NanoPi M4B Single-board computer (RK3399) - Radxa Rock Pi E router SBC (RK3328) ASpeed: - Ampere Mt. Jade, a BMC for an x86 server (AST2500) - IBM Everest, a BMC for a Power10 server (AST2600) - Supermicro x11spi, a BMC for an ARM server (AST2500) Zynq: - Ebang EBAZ4205, FPGA board (Zynq-7000) - ZynqMP zcu104 revC reference platform (ZynqMP)" * tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits) ARM: dts: aspeed: align GPIO hog names with dtschema ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci ARM: dts: aspeed: mowgli: Add i2c rtc device ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address dt-bindings: arm: xilinx: Add missing Zturn boards ARM: dts: ebaz4205: add pinctrl entries for switches ARM: dts: add Ebang EBAZ4205 device tree dt-bindings: arm: add Ebang EBAZ4205 board dt-bindings: add ebang vendor prefix ARM: dts: aspeed: Add Everest BMC machine ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names ARM: dts: aspeed: Add Supermicro x11spi BMC machine ARM: dts: aspeed: g220a: Fix some gpio ARM: dts: aspeed: g220a: Enable ipmb ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ARM: dts: aspeed: Add LCLK to lpc-snoop ...
2021-01-22ARM: dts: Fix up MMC host node namesLinus Walleij1-4/+4
The standard mandates that these nodes be named mmc@... not sdi_foo@... Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-15ARM: dts: ux500: Reserve memory carveoutsLinus Walleij1-1/+1
The Ux500 platforms have some memory carveouts set aside for communicating with the modem and for the initial secure software (ISSW). These areas are protected by the memory controller and will result in an external abort if accessed like common read/write memory. On the legacy boot loaders, these were set aside by using cmdline arguments such as this: mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M mem_modem=16M@112M mali.mali_mem=32M@128M mem=96M@160M hwmem=127M@256M mem_issw=1M@383M mem_ram_console=1M@384M mem=638M@385M Reserve the relevant areas in the device tree instead. The "mali", "hwmem", "mem_ram_console" and the trailing 1MB at the end of the memory reservations in the list are not relevant for the upstream kernel as these are nowadays replaced with upstream technologies such as CMA. The modem and ISSW reservations are necessary. This was manifested in a bug that surfaced in response to commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") which changes the behaviour of memory allocations in such a way that the platform will sooner run into these dangerous areas, with "Unhandled fault: imprecise external abort (0xc06) at 0xb6fd83dc" or similar: the real reason turns out to be that the PTE is pointing right into one of the reserved memory areas. We were just lucky until now. We need to augment the DB8500 and DB8520 SoCs similarly and also create a new include for the DB9500 used in the Snowball since this does not have a modem and thus does not need the modem memory reservation, albeit it needs the ISSW reservation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Cc: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20201213225517.3838501-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-12-09ARM: dts: ux500: Break out DB8500 DTSILinus Walleij1-1/+1
The DB8500 exists in an enhanced variant named DB8520 for some machines. To clearly distinguish between the different machines, create an explicit db8500.dtsi and move the operating points (only known difference so far) to that file, so we can add an explicit db8520.dtsi after this. Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191126124738.77690-1-linus.walleij@linaro.org Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-09ARM: dts: ux500: Move serial aliases to ste-dbx5x0.dtsiStephan Gerhold1-7/+0
Now that we have aliases for I2C and SPI in ste-dbx5x0.dtsi, it does not make much sense to keep only the aliases for UART separately in each board device tree. Considering that all boards set the same aliases for the serial ports there is no reason to keep them separated either. Move them to ste-dbx5x0.dtsi and remove the aliases from the board-specific device tree parts. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191125170428.76069-3-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-09ARM: dts: ux500: Disable I2C/SPI buses by defaultStephan Gerhold1-0/+5
At the moment, all 5 I2C and 6 SPI buses are probed and exposed to user-space by default - even if they are not muxed to any pins on the board. This means that user-space sees an I2C/SPI bus that cannot be actually used properly. In some cases this was used to put the corresponding pins into a low power sleep mode - but even then the pins first need to be configured by the board-specific device tree part. Avoid exposing unconfigured devices to user-space by disabling the I2C/SPI buses by default. Enable them in the board device trees when needed. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191125170428.76069-1-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-09ARM: dts: ux500: Rename generic pin configs according to pin groupStephan Gerhold1-26/+26
Some components (e.g. SDI, I2C) can be used with different pin assignments. Before we can add the alternative configurations, we need to rename the current configurations to more generic names. Each pin configuration usually configures one specific pin group. Therefore we rename the configurations to use the pin group as name. Make up for the slightly longer names by removing the "_mode" suffix. Rename all existing uses to use the new labels. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191125122256.53482-2-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-09ARM: dts: ux500: snowball: Remove unused PRCMU cpufreq nodeStephan Gerhold1-4/+0
Commit a435adbec264 ("ARM: dts: augment Ux500 to use DT cpufreq") switched the Ux500 device tree to use the generic DT cpufreq driver and removed the PRCMU cpufreq node. The snowball DTS still references it, without effect, since cpufreq is now enabled by default. Remove the unused node. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191117222732.283673-1-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-22ARM: dts: ux500: Remove ab8500_ldo_usb regulator from device treeStephan Gerhold1-4/+0
Support for the USB regulator of AB8500 was removed in commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator"). However, the configuration was never removed from the device tree. It does no longer have any effect, remove it from the device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-23ARM: dts: ux500: Fix up the thermal nodesLinus Walleij1-29/+0
The thermal driver for the DB8500 was never properly converted to device tree, the node should definitely be activated for all board variants so move this down into the main SoC DTSI, and default on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159Thomas Gleixner1-7/+1
Based on 1 normalized pattern(s): the code contained herein is licensed under the gnu general public license you may obtain a copy of the gnu general public license version 2 or later at the following locations http www opensource org licenses gpl license html http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-21ARM: dts: ste: Fix SPI controller node namesRob Herring1-1/+1
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21ARM: dts: ux500: Get rid of DTC warningsLinus Walleij1-0/+1
By removing the reference to skeleton.dtsi, defining chosen {} and proper memory nodes we get warning-free device trees for the Ux500. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-04ARM: dts: Ux500: Fix "debounce-interval" property misspellingGeert Uytterhoeven1-5/+5
"debounce_interval" was never supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14ARM: dts: add the AB8500 clocks to the device treeLinus Walleij1-9/+0
This adds the AB8500 clocks to the device tree using the new bindings from the clk subsystem, making audio work again. Cc: Lee Jones <lee.jones@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-02-01ARM: dts: add the AB8500 sysclk to the device treesLinus Walleij1-0/+2
This clock has been missing since some early stages of device tree conversion. Adding the right clocks to the device tree makes USB work again. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01ARM: dts: Ux500: move USB PHY pins to PHY deviceLinus Walleij1-6/+6
The physical pins from the SoC are in a sense belonging to the PHY device (AB8500 USB) rather than the MUSB USB IP block. The driver definately assumes so: before this change it complains that it cannot control the pins it is using: abx5x0-usb ab8500-usb.0: could not get/set default pinstate After this patch the warning goes away. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01ARM: dts: push MMC/SD to board and add commentsLinus Walleij1-1/+5
This moves the enable-active-high setting from the SoC to the board for the VMMCQ regulators. It should at least be in the vicinity of the GPIO line it is defined for. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-17ARM: dts: fix the SD card on the SnowballLinus Walleij1-2/+13
This fixes a very annoying regression on the Snowball SD card that has been around for a while. It turns out that the device tree does not configure the direction pins properly, nor sets up the pins for the voltage converter properly at boot. Unless all things are correctly set up, the feedback clock will not work, and makes the driver spew messages in the console (but it works, very slowly): root@Ux500:/ mount /dev/mmcblk0p2 /mnt/ [ 9.953460] mmci-pl18x 80126000.sdi0_per1: error during DMA transfer! [ 9.960296] mmcblk0: error -110 sending status command, retrying [ 9.966461] mmcblk0: error -110 sending status command, retrying [ 9.972534] mmcblk0: error -110 sending status command, aborting Fix this by rectifying the device tree to correspond to that of the Ux500 HREF boards plus the DAT31DIR setting that is unique for the Snowball, and things start working smoothly. Add in the SDR12 and SDR25 modes which this host can do without any problems. I don't know if this has ever been correct, sadly. It works after this patch. Cc: stable@vger.kernel.org Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-08ARM: dts: Ux500: name the GPIO lines on SnowballLinus Walleij1-0/+83
Using the new line naming mechanism from the GPIO subsystem, name the GPIO lines on the Snowball board that are connected as GPIO on this design. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08ARM: dts: Ux500: move compatible string to chipsetLinus Walleij1-1/+0
Move the compatible string "stericsson,ab8500" from the board definitions into the main node in the chipset file where it belongs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-29ARM: dts: ux500: use the GPIO DT headerLinus Walleij1-10/+9
Use the <dt-bindings/gpio/gpio.h> header instead of using hardcoded values for the GPIO flags. Eradicate the totally bogus "0x4" flag used and set that to GPIO_ACTIVE_HIGH as is proper, switch the inverted card detect on the Snowball to flag using GPIO_ACTIVE_LOW instead of using the MMC-specific inversion flag. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17ARM: ux500: Assign proper sensor IRQs for SnowballLinus Walleij1-3/+4
The Snowball gyro and magnetometer DRDY (data ready) lines are used as interrupt triggers by the IIO subsystem, triggering new data retrieveal on edges on this signal. Thus assign them as the primary interrupt in the device tree. The "other interrupt" coming out of the sensors is for alarms and similar complex events, the DRDY is for periodic measures, which is what we want. After this the generic_buffer tool from IIO tools gives a nice stream of readings after enabling the desired channels in sysfs. Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-22ARM: dts: fix gpio-keys wakeup-source propertySudeep Holla1-5/+5
The keyboard driver for GPIO buttons(gpio-keys) checks for one of the two boolean properties to enable gpio buttons as wakeup source: 1. "wakeup-source" or 2. the legacy "gpio-key,wakeup" However juno, ste-snowball and emev2-kzm9d dts file have a undetected "wakeup" property to indictate the wakeup source. This patch fixes it by making use of "wakeup-source" property. Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Simon Horman <horms@verge.net.au> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-14ARM: ux500: fix MMC/SD card regressionLinus Walleij1-2/+16
Ux500 is regressing due to commit a21763a0b1e5a5ab8310f581886d04beadc16616 "pinctrl: nomadik: activate strict mux mode" which disallows Nomadik GPIO 5 to be muxed in as a level shifter voltage select pin, as it is currently described as being used for RX on UART1. The behaviour is correct, instead the hardware config has been incorrecly specified: UART1 is indeed unused on HREFv60plus and Snowball and that is why HREFv60plus can use the pins it would normally occupy as the voltage select line for the MMC/SD levelshifter (Snowball uses it for I2C4). The reason UART1 was anyway enabled on these platforms was probably to secure the port enumeration to userspace. This can be solved by using aliases (done in a separate patch) so we can now deactivate UART1 and let MMC/SD use it properly on HREFv60plus. We explicitly activate it only for the older HREFprev60 board. To complete, we set up the pin configuration for these pins properly in the sdi0 node. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-14ARM: ux500: define serial port aliasesLinus Walleij1-0/+7
This enumerates the PL011 serial ports on the Ux500. This is necessary to do if we want to remove one of the serial ports, since userspace depends on console to be present on ttyAMA2 and we must not break userspace. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-05-13Merge tag 'ux500-v4.2-dt' of ↵Arnd Bergmann1-2/+21
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt Merge "Ux500 Device Tree changes for the v4.2 series" form Linus Walleij: Define CPU topology, connect that with CoreSight blocks, add sensor information to DT boards. * tag 'ux500-v4.2-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: add the sensors to the STUIB board ARM: ux500: assign the sensor trigger IRQs ARM: ux500: fix lsm303dlh magnetometer compat string ARM: ux500: add CoreSight blocks to DTS file ARM: ux500: define CPU topology
2015-05-13ARM: ux500: assign the sensor trigger IRQsLinus Walleij1-0/+19
The ST sensors on the Ux500 boards were not utilizing the IRQs for data ready sample triggers. Enable this by assigning the right GPIO lines and interrupt lines (when the GPIO lines are used for IRQs) to the accelerometer, gyro and magnetometer sensors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-13ARM: ux500: fix lsm303dlh magnetometer compat stringLinus Walleij1-2/+2
The magnetometer found on the Ux500 TVK and Snowball boards is a LSM303DLH not a LSM303DLM, small differences but still different. Put in the right compatible strings and things start working smoothly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-27ARM: ux500: Enable GPIO regulator for SD-card for snowballUlf Hansson1-2/+0
Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-27ARM: ux500: Move GPIO regulator for SD-card into board DTSsUlf Hansson1-0/+15
The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but instead it's specific to the board. Move the definition of it, into the board DTSs. Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-20pinctrl: nomadik: force-convert to generic config bindingsLinus Walleij1-12/+12
This converts the Nomadik pin controller and all associated device trees to use the standard, generic config bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-20pinctrl: nomadik: force-convert to generic mux bindingsLinus Walleij1-6/+6
This converts the Nomadik pin controller and all associated device trees to use the standard, generic mux bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-02ARM: ux500: disable msp2 node on SnowballLinus Walleij1-1/+0
Analogous to commit 8858d88a25142544843869f0cd3e6654aa7b4aec that fixed commit 70b41abc151f9 "ARM: ux500: move MSP pin control to the device tree" accidentally activated MSP2, giving rise to a boot scroll scream as the kernel attempts to probe a driver for it and fails to obtain DMA channel 14. For some reason I forgot to fix this on the Snowball. Fix this up by marking the node disabled again. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-07-07ARM: ux500: add misc sensors to the device treesLinus Walleij1-3/+35
This adds the STMicroelectonics MEMS sensor devices to the Ux500 family device trees: - Accelerometer - Magnetometer - Gyroscope - Pressure (barometer) Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-12ARM: ux500: Convert to the common mmc DT bindings for highspeed modeUlf Hansson1-2/+2
The mmci host driver supports the common mmc DT parser, which enables us to use the use common names instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-04ARM: ux500: move AB8500 GPIOs to device treeLinus Walleij1-0/+1
Move the AB8500 muxing and biasing settings over from the board file to the device tree, include it in the reference designs using the AB8500: HREF prior to v60, v60plus and Snowball. Set up these GPIO lines using hogs, just like in the board file. Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-13ARM: ux500: Configure regulator for I/O voltage for SD-card slotUlf Hansson1-4/+2
To be able to enable SDR12|25 for SD-cards, we needed to fixup the configuration in DT of the gpio regulator, which handles the signal voltage level. Some configuration were missing and some were wrong. Cc: Lee Jones <lee.jones@linaro.org> Cc: devicetree@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-27ARM: ux500: move snowball pin configs to device treeLinus Walleij1-0/+59
Move the few remaining snowball pin configurations to the device tree, reference these as hogs to the pin controller until there are real devices that can make use of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-27ARM: ux500: move snowball LED pin control to device treeLinus Walleij1-0/+11
This moves the Snowball LED pin config to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-27ARM: ux500: convert Snowball SPI pin referenceLinus Walleij1-0/+28
The SPI0 block is not at all connected to the AB8500 on the Snowball: it is connected to the external header. These pins on the header may also be used for GPIO, but let's assume that SPI is a probable usecase on the Snowball and mux in the SPI block and use these for SPI. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-27ARM: ux500: move snowball ethernet config to device treeLinus Walleij1-0/+25
This transfers the muxing and biasing of the ethernet-related pins on the snowball over to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 10:08:32 +0300