summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a7791-koelsch.dts
AgeCommit message (Collapse)AuthorFilesLines
2014-06-03Merge tag 'dt-for-3.16' of ↵Linus Torvalds1-10/+68
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull ARM SoC devicetree updates from Olof Johansson: "As with previous release, this continues to be among the largest branches we merge, with lots of new contents. New things for this release are among other things: - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request) - Qualcomm APQ8064 and APQ8084 SoCs and eval boards - Nvidia Jetson TK1 development board (Tegra T124-based) Two new SoCs that didn't need enough new platform code to stand out enough for me to notice when writing the SoC tag, but that adds new DT contents are: - TI DRA72 - Marvell Berlin 2Q" * tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits) ARM: dts: add secure firmware support for exynos5420-arndale-octa ARM: dts: add pmu sysreg node to exynos3250 ARM: dts: correct the usb phy node in exynos5800-peach-pi ARM: dts: correct the usb phy node in exynos5420-peach-pit ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410 ARM: dts: add dts files for exynos3250 SoC ARM: dts: add mfc node for exynos5800 ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi ARM: dts: enable fimd for exynos5800-peach-pi ARM: dts: enable display controller for exynos5800-peach-pi ARM: dts: enable hdmi for exynos5800-peach-pi ARM: dts: add dts file for exynos5800-peach-pi board ARM: dts: add dts file for exynos5800 SoC ARM: dts: add dts file for exynos5260-xyref5260 board ARM: dts: add dts files for exynos5260 SoC ARM: dts: update watchdog node name in exynos5440 ARM: dts: use key code macros on Origen and Arndale boards ARM: dts: enable RTC and WDT nodes on Origen boards ARM: dts: qcom: Add APQ8084-MTP board support ARM: dts: qcom: Add APQ8084 SoC support ...
2014-05-22Merge tag 'renesas-dt-scif-for-v3.16' of ↵Olof Johansson1-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards Merge "Renesas ARM Based SoC dt-scif Updates for v3.16" from Simon Horman: r8a7791 (R-Car M2) based Koelsch board and r8a7790 (R-Car H1) based Lager board * Enable SCIF0 and SCIF1 serial ports in DT * tag 'renesas-dt-scif-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-14ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DTLaurent Pinchart1-1/+20
SCIF0 and SCIF1 are used as debug serial ports. Enable them and configure pinmuxing appropriately. We can now remove the clkdev registration hack for SCIF devices from the Koelsch reference board file. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [horms+renesas@verge.net.au: added aliases to avoid device renumbering] [horms+renesas@verge.net.au: resolved conflicts] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-06Merge tag 'renesas-dt-for-v3.16' of ↵Olof Johansson1-10/+68
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman: r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs * Add MSIOF nodes and aliases * Correct I2C clock parents r8a7791 (R-Car M2) SoC * Add EHCI MSTP clock r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards * Add MSIOF nodes * Add gpio-keys support for SW2 * Enable I2C * Enable Quad SPI transfers for the SPI FLASH * Rename and lable spi to qspi, add spi0 alias * Set ethernet PHY LED mode r8a7779 (R-Car H1) and r8a7778 (R-Car M2) SoCs * Improve and correct HSPI nodes r8a7778 (R-Car M2) based Bock-W board * Add SPI FLASH r8a7740 (R-Mobile A1) SoC * Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings r8a7740 (R-Mobile A1) based Armadillo800 EVA board * Enable RTC * Use KEY_* macros for gpio-keys EMEV2 (Emma Mobile EV2) based kzm9g board * Use KEY_* macros for gpio-keys * tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits) ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii" ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI FLASH ARM: shmobile: koelsch dts: Enable Quad SPI transfers for the SPI FLASH ARM: shmobile: r8a7790: add IIC(B) cores to dtsi ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi ARM: shmobile: r8a7790: add IIC0-2 clock macros ARM: shmobile: r8a7791: Fix the I2C clocks parents in DT ARM: shmobile: r8a7790: Fix the I2C clocks parents in DT ARM: shmobile: lager: Correct setting of ethernet PHY LED mode ARM: shmobile: armadillo-reference dts: enable RTC ARM: shmobile: r8a7791: Add EHCI MSTP clock ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings ARM: shmobile: koelsch: activate i2c6 bus ARM: shmobile: koelsch: make i2c2-pfc node unique ARM: shmobile: r8a7791: add IIC(B) cores to dtsi ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi ARM: shmobile: r8a7791: add IIC0/1 clock macros ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys ARM: shmobile: armadillo-reference dts: Use KEY_* macros for gpio-keys ARM: shmobile: koelsch: Set ethernet PHY LED mode ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-04-15ARM: shmobile: koelsch dts: Enable Quad SPI transfers for the SPI FLASHGeert Uytterhoeven1-0/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-15ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfcMagnus Damm1-3/+3
Fix typo of renesas,groups in the koeslch dt. The kernel has no renesas,gpios but this should match renesas,groups. Noticed thanks to similar fix for Lager by Rob Taylor and Ben Dooks. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: koelsch: activate i2c6 busWolfram Sang1-0/+5
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: koelsch: make i2c2-pfc node uniqueWolfram Sang1-1/+1
This node should have a unique name so it can be distinguished when other i2c busses are added later. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: koelsch: Set ethernet PHY LED modeLaurent Pinchart1-0/+1
The Koelsch board uses the ethernet PHY LED0 as a link signal connected to the ethernet controller. Specify the corresponding LED mode for the PHY. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: Add DTS gpio-keys support for SW2 on KoelschMagnus Damm1-7/+36
Add DTS gpio-keys support for SW2 on the Koelsch board. This makes the DT code match the legacy board code. Also update the existing gpio-keys nodes to make use of KEY_n. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: koelsch dts: Add MSIOF nodesGeert Uytterhoeven1-0/+21
Add pinctrl and SPI device for MSIOF on Koelsch. On this board, only MSIOF0 is in use. Its bus contains a single device (a Renesas R2A11302FT PMIC), for which no bindings are defined yet. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: r8a7791/koelsch dts: Rename label spi to qspi, add spi0 aliasGeert Uytterhoeven1-2/+2
Prepare for the advent of MSIOF SPI, which will be spi1 to spi3. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-26ARM: shmobile: Add SDHI devices for Koelsch DTSMagnus Damm1-0/+119
Add DT support for SDHI0, SDHI1 and SDHI2 on Koelsch. The board specific handling of CD and WP pins are using GPIOs. SDHI0 and SDHI1 are hooked up to regular SD connectors while SDHI2 is using micro-SD which is lacking WP signal. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-25ARM: shmobile: koelsch: add Ether DT supportSergei Shtylyov1-1/+27
Define the Koelsch board dependent part of the Ether device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-18ARM: shmobile: r8a7791: add i2c2 bus to koelsch dtWolfram Sang1-0/+19
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: resolved conflict] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-17ARM: shmobile: koelsch-reference: Add DU device to DTSLaurent Pinchart1-1/+6
The DU device has no DT bindings yet, instantiate it as a platform device for now. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: broken out of larger patch that included board changes] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-06ARM: shmobile: koelsch dts: Add QSPI nodesGeert Uytterhoeven1-0/+36
Add pinctrl and SPI devices for QSPI on Koelsch. Add Spansion s25fl512s SPI FLASH and MTD partitions. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dtsValentine Barshak1-0/+4
This enables SATA0 in Koelsch device tree. SATA1 is not available on Koelsch since its pinmux configuration is fixed to PCIe. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: koelsch: (1+1)GiB memory in DTTakashi Yoshii1-1/+6
Fix dts to have memory 1GiB @ 0_4000_0000 + 1GiB @ 2_0000_0000 according to Koelsch's hardware manual. Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: Add GPIO keys to Koelsch DTSLaurent Pinchart1-0/+54
The Koelsh reference device tree is going away, copy the missing GPIO keys device node to the Koeslch device tree file. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: koelsch: Specify external clock frequency in DTLaurent Pinchart1-0/+4
The external crystal frequency is 20MHz on the Koelsch board. Specify it in the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTSLaurent Pinchart1-0/+29
Copy the device nodes from Koelsch reference into the Koeslch device tree file. This will allow us to use a single DTS file regarless of kernel configuration. In case of legacy C board code the device nodes may or may not be used, but in the multiplatform case all the DT device nodes are used. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use #include in device tree sourcesLaurent Pinchart1-1/+1
In order to allow usage of the preprocessor in the SoC device tree sources, switch from /include/ to #include. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Koelsch supportHisashi Nakamura1-0/+32
Koelsch base board support making use of 2 GiB of memory, the r8a7791 SoC with the SCIF0 serial port and CA15 with CMT timer. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped not-yet-ready SMP/PFC] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 19:08:25 +0300