summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a7779-marzen-reference.dts
AgeCommit message (Collapse)AuthorFilesLines
2014-05-13ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pullSimon Horman1-0/+1
This change makes the DTS consistent with the platform data that exists in board-marzen.c. Empirically it does not appear to be necessary. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: marzen: enable HSPI0 in DTSSimon Horman1-0/+11
Based on work for the bockw board by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: marzen: remove SDHI0 WP pin setting from DTSKuninori Morimoto1-2/+1
WP pin is not implemented on Marzen Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: marzen-reference: Use falling edge IRQ for LAN9221Laurent Pinchart1-1/+1
The device is configured to generate an active-low interrupt signal that is automatically deasserted without requiring any action from the host. Use falling edge trigger as that is the configuration currently used on the board. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in board DT filesLaurent Pinchart1-1/+2
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use #include in device tree sourcesLaurent Pinchart1-1/+1
In order to allow usage of the preprocessor in the SoC device tree sources, switch from /include/ to #include. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: marzen: tidyup DT node namingKuninori Morimoto1-3/+3
According to ePAPR spec, this patch tidies up DT node name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: marzen: add SDHI support on DTSKuninori Morimoto1-1/+10
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: marzen: fixup SMSC IRQ number on DTSKuninori Morimoto1-2/+6
This patch fixup miss-setting of SMSC IRQ number. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-10Merge tag 'renesas-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-08-05ARM: shmobile: Mount root file systems in r/w mode for all DT platformsLaurent Pinchart1-1/+1
The shmobile DT files available in the kernel are reference implementations intended to be used as sample code, as well as for development. As such, it makes sense to mount the root file system in read/write mode by default. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: marzen-reference: Add LED2-LED4 to the device treeLaurent Pinchart1-0/+14
LED2 to LED4 are GPIO LEDs. Add corresponding DT nodes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: marzen-reference: Move pinctrl mappings to device treeLaurent Pinchart1-0/+35
Replace the pinctrl mappings in board code by device tree mappings. For devices that are still instantiated from board code reference the mappings as the default pin controller state to apply them at boot time. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: marzen: Reference DT implementationSimon Horman1-0/+47
Provide alternate board code for the marzen to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 03:44:27 +0300