summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a7778-bockw.dts
AgeCommit message (Collapse)AuthorFilesLines
2017-03-13ARM: dts: bockw: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7778.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14ARM: dts: bockw: Name serial port pfc subnode after device nameGeert Uytterhoeven1-1/+1
Name the Pin Function Controller subnode for SCIF0 after its device name, instead of after the serial port alias. This avoids conflicts when enabling support for more serial ports later, either here or in a DT overlay. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30ARM: dts: bockw: Fix W=1 dtc warningsGeert Uytterhoeven1-2/+2
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30ARM: dts: bockw: SCIF0 supports RTS/CTS hardware flow controlGeert Uytterhoeven1-0/+1
On the BOCK-W development board, the RTS and CTS pins of the console SCIF0 are wired to the "product serial" connector. Reflect this in the DTS by adding the "uart-has-rtscts" property to the scif0 device node. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28ARM: dts: bockw: use generic pinctrl propertiesSimon Horman1-20/+20
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the bockw device tree to use the generic properties. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-09ARM: dts: bockw: Enable SCIF_CLK frequency and pinsGeert Uytterhoeven1-0/+13
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-07ARM: dts: bockw: Add compatible property to "partitions" nodeGeert Uytterhoeven1-0/+1
As of commit e488ca9f8d4f62c2 ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10ARM: shmobile: bockw dts: Update console parametersGeert Uytterhoeven1-2/+2
Drop the "console=" parameter from the kernel command line, as it's no longer needed for DT-based platforms. Add serial port config to chosen/stdout-path. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-08ARM: shmobile: bockw dts: Override #sound-dai-cells to zeroGeert Uytterhoeven1-0/+5
The default value of #sound-dai-cells in r8a7778.dtsi is one, while the /sound/simple-audio-card,cpu device node in r8a7778-bockw.dts uses a phandle without any extra cells ("<&rcar_sound>"), causing: /sound/simple-audio-card,cpu: arguments longer than property asoc-simple-card sound: parse error -22 asoc-simple-card: probe of sound failed with error -22 Override #sound-dai-cells to zero to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: bockw: Move SPI FLASH partition to subnodeGeert Uytterhoeven1-5/+8
As of commits 5cfdedb7b9a0fe38 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9c29a650a ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partition to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24ARM: shmobile: bockw dts: define sdhi0 pins with pull-upsUlrich Hecht1-3/+7
Ensures that the pull-ups for pins SD0_CD and SD0_WP are enabled. This is one of two features from the DT reference platform that are still missing in MP. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-21ARM: shmobile: bockw dts: Replace "nor-jedec" by "jedec,spi-nor"Geert Uytterhoeven1-1/+1
Cfr. commit 8947e396a8296c52 ('Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"') Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: bockw dts: Use generic names for device nodesGeert Uytterhoeven1-1/+1
sound-codec -> codec Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: bockw dts: Add "nor-jedec" compatible valueGeert Uytterhoeven1-1/+1
Spansion s25fl008k is compatible with "nor-jedec". Hence add the "nor-jedec" compatible value, so the driver can bind against the generic name, cfr. commit 8ff16cf77ce314c2 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-01ARM: shmobile: bockw: add sound to DTUlrich Hecht1-0/+17
Adds sound card using the ak4643 codec. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27ARM: shmobile: bockw: add devices hooked up to i2c0 to DTUlrich Hecht1-0/+25
Cameras, RTC, and ak4643 sound codec. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27ARM: shmobile: bockw dts: set extal clock frequencyUlrich Hecht1-0/+4
Sets the extal clock to the frequency of the oscillator installed by default (33 MHz). Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27ARM: shmobile: bockw dts: Move Ethernet node to BSCUlrich Hecht1-0/+2
Move the Ethernet node to the new BSC node, as its connected to the Bus State Controller. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms: dropped compat string changes as they seem out of scope] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: bockw: add USB, VIN pin descriptions to DTUlrich Hecht1-0/+20
Adds pin control info for USB host and video-in devices. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a7778: synchronize dts with reference platformUlrich Hecht1-0/+106
This moves everything to the legacy dts that is missing there to make it suitable for use with multiplatform. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use #include in device tree sourcesLaurent Pinchart1-1/+1
In order to allow usage of the preprocessor in the SoC device tree sources, switch from /include/ to #include. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-05ARM: shmobile: Mount root file systems in r/w mode for all DT platformsLaurent Pinchart1-1/+1
The shmobile DT files available in the kernel are reference implementations intended to be used as sample code, as well as for development. As such, it makes sense to mount the root file system in read/write mode by default. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-05ARM: shmobile: bockw: enable network settings on bootargsKuninori Morimoto1-1/+1
"ip" and "root" settings are useful for development Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-03ARM: shmobile: add R-Car M1A Bock-W platform supportKuninori Morimoto1-0/+32
Add basic Bock-W board support More devices will be added on top of this patch after PICNTRL and clock framework are in better shape. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-15 19:59:05 +0300