summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
AgeCommit message (Collapse)AuthorFilesLines
2014-07-12ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DTSimon Horman1-3/+11
Initialise SCIF device using DT when booting armadillo800eva using DT reference. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-09ARM: shmobile: armadillo800eva-reference: Remove early_printk from command lineSimon Horman1-1/+1
As early printk is not supported when devices are initialised using DT, so remove it from the command line. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-16ARM: shmobile: armadillo800eva reference dts: Add matching LED labelsGeert Uytterhoeven1-4/+8
And make the node name numbering match the label numbering. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: devicetree@vger.kernel.org Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11ARM: shmobile: armadillo-reference dts: Add Ethernet supportGeert Uytterhoeven1-0/+17
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-16ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii"Geert Uytterhoeven1-1/+1
Use "sii,s35390a" instead of "seiko,s35390a", cfr. Documentation/devicetree/bindings/i2c/trivial-devices.txt and Documentation/devicetree/bindings/vendor-prefixes.txt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: armadillo-reference dts: enable RTCUlrich Hecht1-0/+18
This enables the Seiko real-time clock that is attached to a couple of GPIO pins. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-14ARM: shmobile: armadillo-reference dts: Use KEY_* macros for gpio-keysGeert Uytterhoeven1-4/+5
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: armadillo: dts: Add gpio-keys deviceLaurent Pinchart1-0/+29
The board had 4 buttons connected to GPIOs, add a corresponding gpio-keys device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIOLaurent Pinchart1-0/+1
The Armadillo 800 EVA panel module has a backlight enable signal connected to GPIO 61. Report this in the backlight DT node. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: armadillo: dts: Add PWM backlight power supplyLaurent Pinchart1-0/+10
Commit 22ceeee16eb8f0d04de3ef43a5174fb30ec18af9 ("pwm-backlight: Add power supply support") added a mandatory power supply for the PWM backlight. Add a fixed 5V regulator and reference it for the backlight power supply. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: armadillo: add FSI support for DTSKuninori Morimoto1-0/+37
This patch support FSI-WM8978 with simple audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231Laurent Pinchart1-1/+1
The device is configured to generate an active-low interrupt signal that needs to be acknowledged by the host. Configure the IRQ to trigger on low level. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in board DT filesLaurent Pinchart1-1/+2
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use #include in device tree sourcesLaurent Pinchart1-1/+1
In order to allow usage of the preprocessor in the SoC device tree sources, switch from /include/ to #include. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: armadillo: tidyup DT node namingKuninori Morimoto1-4/+4
According to ePAPR spec, this patch tidies up DT node name. This patch removed un-used "touchscreen" label Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfacesGuennadi Liakhovetski1-0/+58
Add SDHI0 and MMCIF interfaces to armadillo800eva-reference with regulators and pin configurations. SDHI1 is not added yet, because the switch, that connects the interface either to an SD slot or to a WiFi SDIO card cannot be described in DT yet. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: armadillo-reference: Add PWM backlight node to DTLaurent Pinchart1-0/+19
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boardsGuennadi Liakhovetski1-0/+1
Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-10Merge tag 'renesas-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-08-06ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargsKuninori Morimoto1-1/+1
NFS detail settings like "nfsroot=,rsize=4096,wsize=4096" are no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device treeLaurent Pinchart1-0/+15
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DTLaurent Pinchart1-0/+2
Reference the st1232 reset GPIO from the device tree and remove it from board code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: armadillo-reference: Add st1232 pin mappingsLaurent Pinchart1-0/+7
Add pin mappings for the st1232 device to the device tree and reference them as the default state for the device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: armadillo-reference: Move pinctrl mappings to device treeLaurent Pinchart1-0/+10
Replace the pinctrl mappings in board code by device tree mappings. For devices that are still instantiated from board code reference the mappings as the default pin controller state to apply them at boot time. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Reference DT implementationBastian Hecht1-0/+45
Provide alternate board code for the Armadillo800EVA to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. This a rather bare bone version with the following devices supported: - GIC - irqpins - i2c0/1 - touchscreen Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>