summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/nxp
AgeCommit message (Collapse)AuthorFilesLines
2023-12-05ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)João Rodrigues1-2/+7
TQMa7x (revision 01xxx) uses a LM75A temperature sensor. The two sensors use different I2C addresses, so we can set both sensors simultaneously. Signed-off-by: João Rodrigues <jrodrigues@ubimet.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-05ARM: dts: imx6q-apalis: add can power-up delay on ixora boardAndrejs Cainikovs1-0/+2
Newer variants of Ixora boards require a power-up delay when powering up the CAN transceiver of up to 1ms. Cc: stable@vger.kernel.org Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx6q: skov: fix ethernet clock regressionStefan Kerkmann1-2/+2
A regression was introduced in the Skov specific i.MX6 flavor reve-mi1010ait-1cp1 device tree causing the external ethernet controller to not being selected as the clock source for the i.MX6 ethernet MAC, resulting in a none functional ethernet interface. The root cause is that the ethernet clock selection is now part of the clocks node, which is overwritten in the specific device tree and wasn't updated to contain these ethernet clocks. Fixes: c89614079e44 ("ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent") Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7s: Add DMA channels for CSPI peripheralsAlexander Stein1-0/+8
This adds the rx/tx DMA channels for CSPI peripherals. Channel numbers are taken from i.MX7D RM Rev1 01/2018. Peripheral types ID (7) is selected according to fsl,imx-sdma.yaml and is similar to i.MX6 and i.MX8M platforms. Same goes for transfer priority ID (last number). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx6ul: mba6ulx: fix typo in commentsMarkus Niebel1-1/+1
Replace 'SPPEED' with 'SPEED' Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx6qdl: mba6: fix typo in commentsMarkus Niebel1-3/+3
Replace 'SPPEED' with 'SPEED' Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7s: Add missing #thermal-sensor-cellsAlexander Stein1-0/+1
imx-thermal.yaml is referencing thermal-sensor.yaml, thus this property is required. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx7d-mba7.dtb: tempmon: '#thermal-sensor-cells' is a required property from schema $id: http://devicetree.org/schemas/thermal/imx-thermal.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7s: Fix nand-controller #size-cellsAlexander Stein1-1/+1
nand-controller.yaml bindings says #size-cells shall be set to 0. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: nand-controller@33002000: #size-cells:0:0: 0 was expected from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7s: Fix lcdif compatibleAlexander Stein1-1/+1
imx7d-lcdif is compatible to imx6sx-lcdif. MXSFB_V6 supports overlay by using LCDC_AS_CTRL register. This registers used by overlay plane: * LCDC_AS_CTRL * LCDC_AS_BUF * LCDC_AS_NEXT_BUF are listed in i.MX7D RM as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27ARM: dts: imx7d: Fix coresight funnel portsAlexander Stein2-4/+5
imx7d uses two ports for 'in-ports', so the syntax port@<num> has to be used. imx7d has both port and port@1 nodes present, raising these error: funnel@30041000: in-ports: More than one condition true in oneOf schema funnel@30041000: Unevaluated properties are not allowed ('in-ports' was unexpected) Fix this by also using port@0 for imx7s as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx7d-pico-pi: Disable USDHC1Fabio Estevam1-0/+4
The imx7d-pico-pi board does not have an SD card slot connected to the USDHC1 port. Only eMMC and Wifi SDIO ports are used. Disable the USDHC1 node. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx28: Fix dcp compatibleFabio Estevam1-1/+1
Per fsl-dcp.yaml, passing "fsl,imx28-dcp", "fsl,imx23-dcp" is not valid. Change it to pass only "fsl,imx28-dcp" to fix the following schema warning: crypto@80028000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx28-dcp', 'fsl,imx23-dcp'] is too long 'fsl,imx28-dcp' is not one of ['fsl,imx6sl-dcp', 'fsl,imx6ull-dcp'] 'fsl,imx28-dcp' was expected Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx7s: Remove #power-domain-cells from gpcv2Fabio Estevam1-1/+0
Per fsl,imx-gpcv2.yaml, '#power-domain-cells' is not a valid property for the top-level gpcv2 node. It is only valid for its children nodes. Remove it to fix the following schema warning: gpc@303a0000: '#power-domain-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx25: Remove clock-names from the watchdogFabio Estevam1-1/+0
Per fsl-imx-wdt, 'clock-names' is not a valid property. Remove it to fix the following schema warning: watchdog@53fdc000: Unevaluated properties are not allowed ('clock-names' was unexpected) from schema $id: http://devicetree.org/schemas/watchdog/fsl-imx-wdt.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx25: Fix sram nodeFabio Estevam1-0/+3
Per sram.yaml, address-cells, size-cells and ranges are mandatory. Pass them to fix the following schema warnings: sram@78000000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# sram@78000000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# sram@78000000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx25: Fix dryice nodeFabio Estevam1-2/+1
Per imxdi-rtc.yaml, there is only one valid compatible entry and clock-names is not a valid property. Change it to fix the following schema warnings: dryice@53ffc000: compatible: ['fsl,imx25-dryice', 'fsl,imx25-rtc'] is too long from schema $id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml# dryice@53ffc000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrsTim Harvey1-4/+13
Add device-tree props to allow boot firmware to populate MAC addresses. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-10ARM: dts: vfxxx: Write dmas in a single lineFabio Estevam1-18/+9
There is no need to split dmas in two lines. Make it more readable by writing it in a single line. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-09ARM: dts: imx27-phytec: Use eeprom as the node nameFabio Estevam2-2/+2
Node names should be generic, so use 'eeprom' to fix the following schema warnings: at24@52: $nodename:0: 'at24@52' does not match '^eeprom@[0-9a-f]{1,2}$' from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-10-09ARM: dts: imx51: Remove invalid sahara compatibleFabio Estevam1-1/+1
Per fsl-imx-sahara.yaml, there should not be a 'fsl,imx51-sahara' compatible. Remove it to fix the following schema warning: imx51-apf51.dtb: crypto@83ff8000: compatible: ['fsl,imx53-sahara', 'fsl,imx51-sahara'] is too long from schema $id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx53: Adjust the ecspi compatibleFabio Estevam1-2/+2
Per fsl-imx-cspi.yaml, "fsl,imx53-ecspi" should not contain addtional compatible entries. Change it accordingly to fix the following schema warning: spi@63fac000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx53-ecspi', 'fsl,imx51-ecspi'] is too long Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx7ulp: Fix usbphy1 compatibleFabio Estevam1-1/+1
Per fsl,mxs-usbphy.yaml, fsl,imx7ulp-usbphy is not compatible with fsl,imx6ul-usbphy. Remove 'fsl,imx6ul-usbphy' from the compatible string to fix the following schema warning: imx7ulp-com.dtb: usb-phy@40350000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx7ulp-usbphy', 'fsl,imx6ul-usbphy'] is too long Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q-pistachio: Use a valid value for fsl,tx-d-calFabio Estevam1-2/+2
Passing 5 to fsl,tx-d-cal is not valid as per fsl,mxs-usbphy.yaml: imx6q-pistachio.dtb: usbphy@20c9000: fsl,tx-d-cal:0:0: 5 is less than the minimum of 79 from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Pass the minimum value of 79 instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q-b650v3: Fix fsl,tx-cal-45-dn-ohmsFabio Estevam1-2/+2
Passing 55 to fsl,tx-cal-45-dn-ohms is not valid as per fsl,mxs-usbphy.yaml: imx6q-b650v3.dtb: usbphy@20c9000: fsl,tx-cal-45-dn-ohms:0:0: 55 is greater than the maximum of 54 from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml# Pass the maximum value of 54 instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx28-tx28: Move phy_type to USB nodeFabio Estevam1-2/+2
phy_type is a property for the USB controller, not for the USB PHY. Move it to the USB controller nodes to fix the following schema warning: imx28-tx28.dtb: usbphy@8007c000: 'phy_type' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: mxs: Switch to #pwm-cells = <3>Fabio Estevam15-15/+15
mxs-pwm.yaml documents that #pwm-cells should be 3. This is correct as the last cell may indicate the PWM polarity. Convert all mxs devicetree files to using #pwm-cells = <3> for consistency. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6q: Add Variscite MX6 Custom board supportJames Hilliard2-0/+248
This patch adds support for the Variscite MX6 SoM Carrier Board. This Carrier-Board has the following : - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display - HDMI Connector - USB Host + USB OTG Connector - 10/100/1000 Mbps Ethernet - miniPCI-Express slot - SD Card connector - Audio Headphone/Line In jack connectors - S-ATA - On-board DMIC - RS485 Header - CAN bus header - SPI header - Camera Interfaces header - OnBoard RTC with Coin Backup battery socket - RS232 Debug Header (IDC10) - RS232 DTE Product Page : https://www.variscite.com/product/single-board-computers/var-mx6customboard The dts file based on the ones provided by Variscite on their own kernel, but adapted for mainline. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM supportJames Hilliard1-0/+569
This patch adds support for the Variscite VAR_SOM-MX6 SoM with : - i.MX6 Quad or Dual Lite SoC - 256 – 4096 MB DDR3 - 4-64 GB eMMC - 128 – 1024 MB SLC NAND - Camera Interface - HDMI+CEC interface - LVDS / DSI / Parallel RGB interfaces - Ethernet RGMII interface - On-SoM Wi-Fi/Bluetooth with WiLink wl183x SDIO Module - SD/MMC/SDIO interface - USB Host + USB OTG interface - I2C interfaces - SPI interfaces - PCI-Express 2.0 interface - on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface - Digital Audio interface - S/PDIF interface Product website : https://www.variscite.com/product/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6/ Support is handled with a SoM-centric dtsi exporting the default interfaces along the default pinmuxing to be enabled by the board dts file. This file is based on the one provided by Variscite on their own kernel, but adapted for mainline. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: mxs: Fix duart clock-namesFabio Estevam2-2/+2
Per pl011.yaml, the first entry of clock-names should be "uartclk". Change it accordingly to fix the following schema warning: imx23-xfi3.dtb: serial@80070000: clock-names:0: 'uartclk' was expected The pl011 driver does not search for the clock name, so this change is safe and was tested on a imx28-evk board. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull/7d-colibri: Fix compatibleFabio Estevam13-14/+6
Fix the imx6ull/7d-colibri devicetrees as per the rules defined at fsl.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull-phytec-tauri: Fix compatibleFabio Estevam2-4/+4
Per fsl.yaml, the order of the compatible strings are not correct for imx6ull-phytec-tauri-emmc and imx6ull-phytec-tauri-nand. Fix them accordingly. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ull-phytec-tauri: Remove board model and compatibleFabio Estevam1-5/+0
The imx6ull-phytec-tauri.dtsi file is included in two places: imx6ull-phytec-tauri-emmc.dts imx6ull-phytec-tauri-nand.dts These two files overwrite the board model and compatible locally, so there is no need for describing them in imx6ull-phytec-tauri.dtsi. Remove the board model and compatible. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx7s: Fix CSI clocksFabio Estevam1-4/+2
Per nxp,imx7-csi.yaml, there is only one CSI clock entry. Fix it. This fixes the following schema warnings: imx7d-zii-rpu2.dtb: csi@30710000: clocks: [[1, 413], [1, 326], [1, 413]] is too long from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# imx7d-zii-rpu2.dtb: csi@30710000: clock-names:0: 'mclk' was expected from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# imx7d-zii-rpu2.dtb: csi@30710000: clock-names: ['axi', 'mclk', 'dcic'] is too long from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx51-zii-rdu1: Use preferred i2c-gpios propertiesFabio Estevam1-2/+2
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx51-zii-rdu1.dtb: i2c-gpio: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx51-zii-rdu1.dtb: i2c-gpio: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6ul-tx6ul: Use preferred i2c-gpios propertiesFabio Estevam1-4/+2
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx6ul-tx6ul-0011.dtb: i2c-gpio: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx6ul-tx6ul-0011.dtb: i2c-gpio: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6qdl-gw591: Remove lis2de12 interrupt-namesFabio Estevam2-2/+0
According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one. Remove it to fix the following schema warnings: imx6dl-gw5912.dtb: accel@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6qdl-gw5904: add internal mdio nodesTim Harvey1-0/+29
Complete the switch definition by adding the internal mdio nodes. This does not change behavior on Linux but is required if the dt is used for U-Boot which requires the internal PHY ports to be defined for DSA. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx: add support for the ATM0700D4 panel attached to sk-imx53Dmitry Baryshkov4-0/+256
The SK-ATM0700D4-Plug is an extension board (provided by the same manufacturer, [1]) which can be connected to the SK-IMX53 panel kit. The panel can be connected either using the RGB parallel bus or using the LVDS connector (recommended). Add DT files describing this "shield", both RGB and LVDS connections. [1] http://starterkit.ru/html/index.php?name=shop&op=view&id=64 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-24ARM: dts: nxp: imx6qdl-nitrogen6: correct regulator node nameKrzysztof Kozlowski1-1/+1
Root node is not a bus, thus top-level nodes do not have unit addresses. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-24ARM: dts: imx6ul: mba6ulx: Fix gpio-keys button node namesAlexander Stein1-3/+3
Numbers are separated by dashes. Fixes the warnings: arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dtb: gpio-keys: 'button1', 'button2', 'button3' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-24ARM: dts: imx6ul: mba6ulx: Mark gpio-buttons as wakeup-sourceAlexander Stein1-0/+3
I2C expander is capable of generating an IRQ during powersave, so the attached buttons can be used for waking up the system. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-31Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds117-1203/+1447
Pull ARM devicetree updates from Arnd Bergmann: "These are the devicetree updates for Arm and RISC-V based SoCs, mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and Starfive. Only a few new SoC got added: - TI AM62P5, a variant of the existing Sitara AM62x family - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55 SoC. - Qualcomm ipq5018 is used in wireless access points - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone platform. In total, 29 machines get added, which is low because of the summer break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST, Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of these are development and reference boards. Despite not adding a lot of new machines, there are over 700 patches in total, most of which are cleanups and minor fixes" * tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits) arm64: dts: use capital "OR" for multiple licenses in SPDX ARM: dts: use capital "OR" for multiple licenses in SPDX arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved ARM: dts: qcom: apq8064: add support to gsbi4 uart riscv: dts: change TH1520 files to dual license riscv: dts: thead: add BeagleV Ahead board device tree dt-bindings: riscv: Add BeagleV Ahead board compatibles ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs ARM: dts: stm32: support display on stm32f746-disco board ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco ARM: dts: stm32: add pin map for LTDC on stm32f7 ARM: dts: stm32: add ltdc support on stm32f746 MCU arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC riscv: dts: starfive: fix jh7110 qspi sort order ...
2023-08-29ARM: dts: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski12-12/+12
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230823085146.113562-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12ARM: dts: imx6qdl: mba6: Fix gpio-keys button node namesAlexander Stein1-3/+3
Numbers are separated by dashes. Fixes the warnings: arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: gpio-buttons: 'button1', 'button2', 'button3' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12ARM: dts: imx6ul: Fix nand-controller #size-cellsAlexander Stein1-1/+1
nand-controller.yaml bindings says #size-cells shall be set to 0. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dtb: nand-controller@1806000: #size-cells:0:0: 0 was expected from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warningsAlexander Stein1-2/+1
interrupt-controller is only valid for gpio subnode, remove it. Rename touchscreen subnode according to bindings. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing propertyFabio Estevam1-1/+1
Per simple-card.yaml, 'simple-audio-card,audio-routing' is not a valid property. Change it to 'simple-audio-card,routing'. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx6q-prti6q: Fix the SDIO wifi nodeFabio Estevam1-1/+4
Wifi chip description, which causes the following schema warning: imx6q-prti6q.dtb: mmc@2194000: Unevaluated properties are not allowed ('wifi' was unexpected) Pass the missing items to fix it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: vfxxx: Pass 'mmc' as the esdhc node namesFabio Estevam1-2/+2
Pass 'mmc' as the esdhc node names to fix the following schema warnings: vf610-cosmic.dtb: esdhc@400b1000: $nodename:0: 'esdhc@400b1000' does not match '^mmc(@.*)?$' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx53-smd: Remove invalid SPI flash entryFabio Estevam1-2/+2
"st,m25p" is not a valid compatible according to jedec,spi-nor.yaml. Remove it. Also, node names should be generic, so use 'flash' as the SPI NOR flash node name. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 22:10:43 +0300