Age | Commit message (Expand) | Author | Files | Lines |
2019-05-30 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159 | Thomas Gleixner | 1 | -7/+1 |
2019-04-28 | Merge tag 'imx-dt-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawn... | Olof Johansson | 1 | -2/+2 |
2019-03-20 | ARM: dts: pfla02: increase phy reset duration | Marco Felsch | 1 | -0/+1 |
2019-03-19 | ARM: dts: pfla02: prepare storage devices to add paritions | Marco Felsch | 1 | -2/+2 |
2019-02-12 | ARM: dts: pfla02: add ksz9031 clock skew values | Philipp Zabel | 1 | -0/+13 |
2019-02-12 | ARM: dts: imx6qdl-phytec-pfla02: add missing interrupt-controller property | Marco Felsch | 1 | -0/+1 |
2018-12-10 | ARM: dts: imx6qdl: Fix memory node duplication | Marco Franchi | 1 | -0/+1 |
2018-05-15 | ARM: dts: imx6qdl-phytec-pfla02: Use IRQ_TYPE specifier | Hernán Gonzalez | 1 | -1/+1 |
2018-02-12 | ARM: dts: imx: Add memory node unit name | Marco Franchi | 1 | -1/+1 |
2017-06-07 | ARM: dts: imx6: Fix PCI GPIO reset polarity | Fabio Estevam | 1 | -1/+1 |
2017-01-02 | ARM: dts: imx: remove obsoleted property fsl,spi-num-chipselects | Vladimir Zapolskiy | 1 | -1/+0 |
2016-10-24 | ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible" | Jagan Teki | 1 | -3/+3 |
2016-08-09 | ARM: i.MX6 Phytec PFLA02: Add supplies for the SoC internal regulators | Sascha Hauer | 1 | -0/+12 |
2016-08-09 | ARM: dts: imx6qdl: don't configure reserved pad settings | Uwe Kleine-König | 1 | -12/+12 |
2015-10-19 | ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names" | Michael Opdenacker | 1 | -2/+2 |
2015-10-19 | ARM: dts: imx: add "jedec,spi-nor" flash compatible binding | Rafał Miłecki | 1 | -1/+1 |
2015-07-24 | dts: imx6: fix sd card gpio polarity specified in device tree | Dong Aisheng | 1 | -4/+4 |
2015-04-27 | ARM: dts: imx6: phyFLEX: USB VBUS control is active-high | Philipp Zabel | 1 | -0/+2 |
2014-11-23 | ARM: dts: imx6: phyFLEX: Add CAN support | Christian Hemp | 1 | -0/+13 |
2014-11-23 | ARM: dts: imx6: phyFLEX: Add PCIe | Christian Hemp | 1 | -0/+11 |
2014-11-23 | ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic | Christian Hemp | 1 | -3/+3 |
2014-11-23 | ARM: dts: imx6: phyFLEX: Enable gpmi in module file | Christian Hemp | 1 | -1/+1 |
2014-11-23 | ARM: dts: imx6: phyFLEX: set nodes in alphabetical order | Christian Hemp | 1 | -16/+16 |
2014-11-23 | ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards | Dmitry Lavnikevich | 1 | -0/+15 |
2014-11-23 | ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 | Dmitry Lavnikevich | 1 | -0/+26 |
2014-08-29 | devicetree: Dialog Semiconductor consolidate existing vendor prefixes to stan... | Steve Twiss | 1 | -1/+1 |
2014-07-18 | ARM: dts: pfla02: Add ethernet phy supply regulator | Philipp Zabel | 1 | -0/+1 |
2014-05-16 | ARM: dts: pfla02: Add UART1 (uart3) | Philipp Zabel | 1 | -0/+15 |
2014-05-16 | ARM: dts: pfla02: PHY reset is active-low | Philipp Zabel | 1 | -1/+3 |
2014-05-16 | ARM: dts: pfla02: Add GPIO LEDs | Philipp Zabel | 1 | -0/+16 |
2014-05-16 | ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo | Philipp Zabel | 1 | -0/+323 |