summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2014-11-22ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl,mode' propertyFabio Estevam1-1/+0
imx6qdl-gw5x boards use sgtl5000 codec and the machine file (imx-sgtl5000) already sets SSI in slave mode and codec in master mode, so there is no need for having this property. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-16ARM: dts: imx: ventana: add canbus support for GW52xxTim Harvey1-0/+14
The GW52xx baseboard supports CANbus so we enable it, configure its pinmux and CAN_STBY gpio. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: cleanup pinctrl groupsTim Harvey1-102/+108
Follow the conventions for pinctrl: - grouping pinctrl in logical alphabatized groups - remove any pinctrl not being used by a driver or needed by user - move iomuxc to bottom of file for readability Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: configure padconf for all pinsTim Harvey1-16/+16
Follow the convention of configuring padconf for all pins and not leaving any 0x80000000 to leave them un-configured. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: use gpio constantsTim Harvey1-10/+12
Use the gpio contants defined in bindings for active high/low Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: remove unused aliasesTim Harvey1-2/+0
Remove aliases that are either not used by bootloader or are provided via included dtsi files. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: remove unsupported dt nodesTim Harvey1-74/+0
The general device-tree rule is to not include nodes that do not have a driver or bindings in a dts/dtsi. Remove the place-holder nodes from the Gateworks Ventana boards until a time that a driver with proper bindings exists. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx: remove ssi fsl,mode for audio cardsMarkus Pargmann1-1/+0
The DAI mode is and should be configured by the sound card driver as codec and ssi have to be in the right modes to communicate with each other. It is possible to operate the ssi unit or the codec in master mode, sometimes even on the same board in different configurations. With the latest changes in the fsl-ssi driver, the 'fsl,mode' property is only handled as a fallback property. If the sound card sets the DAI mode correctly, this fallback configuration is dropped. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: ventana: change sound device nameTim Harvey1-2/+2
The 'model' property in the imx-audio-sgtl5000 binding specifies the user-visible name of the audio device. This should be something common and not baseboard specific. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-17ARM: dts: imx6: ventana: correct gw52xx sgtl5000 clock sourceTim Harvey1-1/+1
Correct the invalid clock for the sgtl5000 audio codec on the GW52xx Ventana baseboard. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-17ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefixPhilipp Zabel1-1/+1
The vendor prefix for Linear Technology should be lltc, same as the NASDAQ symbol. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx: Fix LVDS mapping for Ventana GW52xxTim Harvey1-0/+21
The GW52xx supports LVDS on channel 0. Remove the obsolete crtcs node and add display timings for the HanStar HSD100PXN1 display. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: imx: add LVDS backlight for VentanaTim Harvey1-0/+19
The GW54xx/GW53xx/GW52xx all support LVDS with a PWM controlled backlight. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16ARM: dts: ventana: Add HDMI supportTim Harvey1-0/+5
Configure ddc and enable HDMI Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' propertyShawn Guo1-3/+0
Since commit (655b43c staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs), 'crtcs' becomes a dead property. Remove it. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
2014-02-09ARM: dts: add Gateworks Ventana supportTim Harvey1-0/+490
The Gateworks Ventana product family consists of several baseboard designs based on the Freescale i.MX6 family of processors. Each baseboard has a different set of possible features. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>