summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos4412-midas.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2021-05-11ARM: dts: exynos: enable PMIC wakeup from suspend on MidasKrzysztof Kozlowski1-0/+1
The RTC on Maxim max77686 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-5-krzysztof.kozlowski@canonical.com
2021-03-07ARM: dts: exynos: correct PMIC interrupt trigger level on Midas familyKrzysztof Kozlowski1-1/+1
The Maxim PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Additionally, the interrupt line is shared so using level sensitive interrupt is here especially important to avoid races. Fixes: 15dfdfad2d4a ("ARM: dts: Add basic dts for Exynos4412-based Trats 2 board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-5-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct MUIC interrupt trigger level on Midas familyKrzysztof Kozlowski1-1/+1
The Maxim MUIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. Without specifying the interrupt type in Devicetree, kernel might apply some fixed configuration, not necessarily working for this hardware. Additionally, the interrupt line is shared so using level sensitive interrupt is here especially important to avoid races. Fixes: 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-4-krzk@kernel.org
2021-03-07ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas familyKrzysztof Kozlowski1-1/+1
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: e8614292cd41 ("ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210212534.216197-3-krzk@kernel.org
2020-11-10ARM: dts: exynos: use generic name for max77693 motor in MidasKrzysztof Kozlowski1-1/+1
Use a generic name for the max77693 motor driver in Exynos4412 Midas boards to align with Devicetree specification naming convention. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201105184506.215648-3-krzk@kernel.org
2020-10-29ARM: dts: exynos: remove redundant status=okay in Exynos4412 boardsKrzysztof Kozlowski1-3/+0
New nodes are enabled by default, so status=okay is not needed for them. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201027170947.132725-6-krzk@kernel.org
2020-10-29ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boardsKrzysztof Kozlowski1-7/+7
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201027170947.132725-5-krzk@kernel.org
2020-10-28ARM: dts: exynos: Enable Bluetooth support for Midas board familyMarek Szyprowski1-0/+28
Add a node for the BCM4334 Bluetooth chip on the serial bus #0 on the Exynos4412-based Midas board family. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20201027142330.5121-3-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-02ARM: dts: exynos: Override thermal by label in MidasKrzysztof Kozlowski1-19/+15
Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-26-krzk@kernel.org
2020-09-02ARM: dts: exynos: Correct compatible of fixed clocks in Midas boardsKrzysztof Kozlowski1-2/+2
The fixed clocks implemented by Samsung clock drivers use only one compatible so drop the additional "fixed-clock" to fix dtbs_check warnings like: arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible:0: 'fixed-clock' was expected From schema: Documentation/devicetree/bindings/clock/fixed-clock.yaml arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible: ['samsung,clock-xxti', 'fixed-clock'] is too long arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible: Additional items are not allowed ('fixed-clock' was unexpected) arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: '#clock-cells' is a required property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-24-krzk@kernel.org
2020-08-17ARM: dts: exynos: Add sound support to MidasSimon Shields1-13/+65
Update the never-mainlined "samsung,trats2-audio" binding and instead use the new "samsung,midas-audio" binding. Signed-off-by: Simon Shields <simon@lineageos.org> [s.nawrocki: fixed DAPM routing entries for MICBIAS1/2, adjusted to new cpu/codec binding, corrected the regulator nodes indexing] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-04-13ARM: dts: exynos: Correct regulator namesMarek Szyprowski1-4/+4
Both CPU-freq and dev-freq drivers support proper regulator lookup from device-tree, so the early introduced hacks for registering main ARM VDD regulator under 'vdd_arm' name are no longer needed. Similar for devfreq. Fix this by removing the obsolete comments and changing the regulator names to the one, which match the schematics and style for the given board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-04-13ARM: dts: exynos: Convert to new i2c-gpio bindingsMarek Szyprowski1-3/+6
The updated "i2c-gpio" driver bindings require to define the SDA and SCL GPIO lines in the separate properties and mark both as GPIO_OPEN_DRAIN. Covert all Exynos dts files to follow this style. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-11-13ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas familySimon Shields1-0/+29
Add support for the capacitive touch-sensitive buttons of the following smartphones: - Samsung Galaxy SIII (I9300) - Samsung Galaxy SIII 4G (I9305) - Samsung Galaxy Note II (N7100) - Samsung Galaxy Note II 4G (N7105) The keycodes correspond to markings on the phone case. Signed-off-by: Simon Shields <simon@lineageos.org> [GNUtoo@cyberdimension.org: Fixed keycodes, modified commit message] Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4Krzysztof Kozlowski1-0/+5
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the GPU as much as possible however still few elements are missing: 1. Exynos4210 bus clock is not described in hardware manual therefore the IP gate clock was provided, 2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused), 3. Regulator supplies on Trats board. Limited testing on Odroid U3 (Exynos4412). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-11-18ARM: dts: exynos: Add all CPUs in cooling mapsViresh Kumar1-2/+6
Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-09-06ARM: dts: exynos: Remove double SD card detect pin inversionKrzysztof Kozlowski1-2/+1
The SDHCI standard, MMC host controller bindings and MMC core defines card detect pin as active low. Therefore there is no point to invert it twice. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-07-23ARM: dts: exynos: Configure Midas SD card CD pinSimon Shields1-1/+6
This pin is externally pulled up, so we need to disable the SoC's internal pull down resistor to allow it to function properly. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-07-23ARM: dts: exynos: Configure max77686 IRQ pin on MidasSimon Shields1-0/+7
This pin is externally pulled up, so we need to disable the SoC's internal pull-down. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-07-23ARM: dts: exynos: Add pinctrl for Midas fuelgauge IRQ pinSimon Shields1-0/+7
This pin is externally pulled up, so we should disable the SoC's pull down resistor in order for the interrupt to function properly. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-07-23ARM: dts: exynos: Add pinctrl config for Midas keysSimon Shields1-0/+7
This pins are externally pulled up, and so we should explicitly configure them to disable the SoC-internal pull-downs. Previously we relied on the bootloader doing this in order to allow the buttons to function properly. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-07-23ARM: dts: exynos: Add max77693 pinctrl config for MidasSimon Shields1-0/+7
Currently, we assume that the bootloader has correctly configured the interrupt pin for max77693. This might not actually be the case - so it's better to configure it explicitly. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-29ARM: dts: exynos: Bring order in fixed-regulators naming in Midas boardsKrzysztof Kozlowski1-4/+4
exynos4412-midas.dtsi is base for galaxy-s3.dtsi and n710x.dts. All of them contain fixed regulators named "voltage-regulator-X". Their indexes got mixed up while splitting common code in commit c769eaf7a85d ("ARM: dts: exynos: Split Trats2 DTS in preparation for Midas boards"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-29ARM: dts: exynos: Remove unnecessary address/size properties in Midas boardsKrzysztof Kozlowski1-46/+40
The children of regulators node do not have reg/ranges properties. Move the children up one level, get rid of regulators node and remove address-cells and size-cells properties. This fixes warnings for Exynos4412 Midas family boards: arch/arm/boot/dts/exynos4412-i9300.dtb: Warning (avoid_unnecessary_addr_size): /regulators: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/boot/dts/exynos4412-i9305.dtb: Warning (avoid_unnecessary_addr_size): /regulators: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/boot/dts/exynos4412-n710x.dtb: Warning (avoid_unnecessary_addr_size): /regulators: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-03-12ARM: dts: exynos: Fix "debounce-interval" property misspelling in MidasGeert Uytterhoeven1-1/+1
"debounce-inteval" was never supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-19ARM: dts: exynos: Split Trats2 DTS in preparation for Midas boardsSimon Shields1-0/+1308
The Midas boards share a lot with Trats2. Split the common parts out of Trats2 into a common Midas DTSI and a common "Galaxy S3" DTS. Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-28 15:33:37 +0300