summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/aspeed
AgeCommit message (Collapse)AuthorFilesLines
2024-05-02ARM: dts: aspeed: Add ASRock E3C256D4I BMCZev Weiss2-0/+323
Like the E3C246D4I, this is a reasonably affordable off-the-shelf mini-ITX AST2500/Xeon motherboard with good potential as an OpenBMC development platform. Booting the host requires a modicum of eSPI support that's not yet in the mainline kernel, but most other basic BMC functionality is available with this device-tree. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20240502002836.17862-8-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-05-01ARM: dts: aspeed: x4tf: Add dts for asus x4tf projectKelly Hung2-0/+582
Base on aspeed-g6.dtsi and can boot into BMC console. Signed-off-by: Kelly Hung <ppighouse@gmail.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/r/20240430045853.3894633-3-Kelly_Hung@asus.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-05-01ARM: dts: aspeed: Remove Facebook Cloudripper dtsTao Ren2-545/+0
Remove Facebook Cloudripper dts because the switch platform is not actively maintained (all the units are deprecated). Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20240411045622.7915-1-rentao.bupt@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: drop unused ref_voltage ADC propertyKrzysztof Kozlowski3-5/+0
Aspeed ADC "ref_voltage" property is neither documented nor used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-5-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: harma: correct Mellanox multi-host propertyKrzysztof Kozlowski1-1/+1
"mlx,multi-host" is using incorrect vendor prefix and is not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-4-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host propertyKrzysztof Kozlowski1-1/+1
"mlx,multi-host" is using incorrect vendor prefix and is not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-3-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: yosemite4: correct Mellanox multi-host propertyKrzysztof Kozlowski1-2/+2
"mlx,multi-host" is using incorrect vendor prefix and is not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-2-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: greatlakes: correct Mellanox multi-host propertyKrzysztof Kozlowski1-1/+1
"mlx,multi-host" is using incorrect vendor prefix and is not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405064624.18997-1-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Modify I2C bus configurationRenze Nicolai1-0/+7
Enable I2C bus 8 which is exposed on the IPMB_1 connector on the X570D4U mainboard. Additionally adds a descriptive comment to I2C busses 1 and 5. Signed-off-by: Renze Nicolai <renze@rnplus.nl> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMCRenze Nicolai1-16/+13
Additionally adds labels describing the ADC channels. Signed-off-by: Renze Nicolai <renze@rnplus.nl> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMCRenze Nicolai1-58/+37
Restructure GPIO table to fit maximum line length. Fix mistakes found while working on OpenBMC userland configuration and based on probing the board. Schematic for this board is not available. Because of this the choice was made to use a descriptive method for naming the GPIOs. - Push-pull outputs start with output-* - Open-drain outputs start with control-* - LED outputs start with led-* - Inputs start with input-* - Button inputs start with button-* - Active low signals end with *-n Signed-off-by: Renze Nicolai <renze@rnplus.nl> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: yosemite4: set bus13 frequency to 100kDelphine CC Chiu1-1/+1
Since the ocp debug card only supports 100k, the bus is also set to 100k. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> [AJ: Fixed fuzz due to prior IPMB patch] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: Aspeed: Bonnell: Fix NVMe LED labelsEddie James1-4/+4
The PCA chip for the NVMe LEDs is wired up backwards, so correct the device tree labels. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug cardDelphine CC Chiu1-0/+7
Add OCP debug card devicetree config Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: ahe50dc: Update lm25066 regulator nameZev Weiss1-1/+1
A recent change to the lm25066 driver changed the name of its regulator from vout0 to vout; device-tree users of lm25066's regulator functionality (of which ahe50dc is the only one) thus require a corresponding update. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: Conor Dooley <conor+dt@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Add vendor prefixes to lm25066 compat stringsZev Weiss2-3/+3
Due to the way i2c driver matching works (falling back to the driver's id_table if of_match_table fails) this didn't actually cause any misbehavior, but let's add the vendor prefixes so things actually work the way they were intended to. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: asrock: Use MAC address from FRU EEPROMZev Weiss2-0/+18
Like the more recently added ASRock BMC platforms, e3c246d4i and romed8hm3 also have the BMC's MAC address available in the baseboard FRU EEPROM, so let's add support for using it. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: system1: IBM System1 BMC boardAndrew Geissler2-0/+1624
Added a device tree for IBM system1 BMC board, which uses AST2600 SoC. Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240125212154.4028640-3-ninad@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: FSI interrupt supportEddie James2-0/+6
Enable FSI interrupt controllers for AST2600 and P10BMC hub master. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20240215220759.976998-27-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Modify GPIO line namePeter Yin1-9/+29
Add: "reset-cause-platrst", "cpu0-err-alert", "leakage-detect-alert", "presence-post-card", "ac-power-button", "P0_I3C_APML_ALERT_L", "irq-uv-detect-alert", "irq-hsc-alert", "cpu0-prochot-alert", "cpu0-thermtrip-alert", "reset-cause-pcie", "pvdd11-ocp-alert" Rename: "power-cpu-good" to "host0-ready", "host-ready-n" to "post-end-n Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-13-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add retimer devicePeter Yin1-0/+8
Add pt5161l device in i2c bus12 and bus21. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-12-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Revise node namePeter Yin1-3/+3
Revise max31790 and delta_brick node name. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-11-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add ltc4286 devicePeter Yin1-0/+7
Add ltc4286 device. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-10-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add NIC Fru devicePeter Yin1-0/+6
Add MB NIC Device Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-9-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Revise max31790 addressPeter Yin1-4/+4
Revise max31790 address from 0x30 to 0x5e Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-8-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add PDB temperaturePeter Yin1-1/+6
Add PDB temperature sensor. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-7-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add spi-gpioPeter Yin1-0/+21
Add spi-gpio for tpm device. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-6-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add cpu power good line namePeter Yin1-1/+1
Add a line name for cpu power good. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-5-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Remove VuartPeter Yin1-4/+0
Remove vuart to avoid port conflict with uart2 Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-4-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.Peter Yin1-2/+2
Change routing to match SOL(Serial Over LAN) settings. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-3-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Revise SGPIO line name.Peter Yin1-2/+2
The same name as reset-control-smb-e1s change to reset-control-smb-e1s-0 and reset-control-smb-e1s-0. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240412091600.2534693-2-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: add sgpio line nameYang Chen1-0/+149
Add the SGPIO line name that the project's function can use by the meaningful name. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-12-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: add gpio line nameYang Chen1-0/+30
Add the GPIO line name that the project's function can use by the meaningful name. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-11-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Add led-fan-fault gpioYang Chen1-0/+17
Add led-fan-fault gpio pin on the PCA9555 on the i2c bus 0. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-10-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: add fan rpm controllerYang Chen1-0/+42
Add fan rpm controller max31790 on all bus of FCB. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-9-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: add bus labels and aliasesYang Chen1-6/+16
Add bus labels and aliases for the fan control board. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-8-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: correct the address of eepromYang Chen1-2/+2
Correct the address from 0x51 to 0x54 of eeprom on the i2c bus 1 Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-7-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Add temperature sensorYang Chen1-1/+6
Add one temperature sensor on i2c bus 1 Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-6-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Enable power monitor deviceYang Chen1-0/+22
Enable power monitor device ina230 and ltc2945 on the i2c bus 0 Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-5-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Change sgpio useYang Chen1-1/+1
Correct the sgpio use from sgpiom1 to sgpiom0 Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-4-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Modify mac3 settingYang Chen1-2/+5
Remove the unuse setting and fix the link to 100 M Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-3-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: minerva: Revise the name of DTSYang Chen2-2/+2
The project Minerva which is the platform used by Meta has two boards: the Chassis Management Module (Minerva) and the Motherboard (Harma), so change the DTS name to minerva here for CMM use. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231212075200.983536-2-yangchen.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Harma: Add Meta Harma (AST2600) BMCPeter Yin2-0/+586
Add linux device tree entry related to the Meta(Facebook) computer-node system use an AT2600 BMC. This node is named "Harma". Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231211162656.2564267-3-peteryin.openbmc@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: asrock: Add ASRock X570D4U BMCRenze Nicolai2-0/+378
This is a relatively low-cost AST2500-based Amd Ryzen 5000 Series micro-ATX board that we hope can provide a decent platform for OpenBMC development. This initial device-tree provides the necessary configuration for basic BMC functionality such as serial console, KVM support and POST code snooping. Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231202003908.3635695-3-renze@rnplus.nl Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-05-01ARM: dts: aspeed: Add ASRock SPC621D8HM3 BMCZev Weiss2-0/+325
This is a Xeon board broadly similar (aside from CPU vendor) to the already-support romed8hm3 (half-width, single-socket, ast2500). It doesn't require anything terribly special for OpenBMC support, so this device-tree should provide everything necessary for basic functionality with it. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20231120121954.19926-6-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-02-20arm: dts: Fix dtc interrupt_provider warningsRob Herring3-44/+3
The dtc interrupt_provider warning is off by default. Fix all the warnings so it can be enabled. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-01-25ARM: dts: Fix TPM schema violationsLukas Wunner4-7/+7
Since commit 26c9d152ebf3 ("dt-bindings: tpm: Consolidate TCG TIS bindings"), several issues are reported by "make dtbs_check" for ARM devicetrees: The nodename needs to be "tpm@0" rather than "tpmdev@0" and the compatible property needs to contain the chip's name in addition to the generic "tcg,tpm_tis-spi" or "tcg,tpm-tis-i2c": tpmdev@0: $nodename:0: 'tpmdev@0' does not match '^tpm(@[0-9a-f]+)?$' from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml# tpm@2e: compatible: 'oneOf' conditional failed, one must be fixed: ['tcg,tpm-tis-i2c'] is too short from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml# Fix these schema violations. Aspeed Facebook BMCs use an Infineon SLB9670: https://lore.kernel.org/all/ZZSmMJ%2F%2Fl972Qbxu@fedora/ https://lore.kernel.org/all/ZZT4%2Fw2eVzMhtsPx@fedora/ https://lore.kernel.org/all/ZZTS0p1hdAchIbKp@heinlein.vulture-banana.ts.net/ Aspeed Tacoma uses a Nuvoton NPCT75X per commit 39d8a73c53a2 ("ARM: dts: aspeed: tacoma: Add TPM"). phyGATE-Tauri uses an Infineon SLB9670: https://lore.kernel.org/all/ab45c82485fa272f74adf560cbb58ee60cc42689.camel@phytec.de/ A single schema violation remains in am335x-moxa-uc-2100-common.dtsi because it is unknown which chip is used on the board. The devicetree's author has been asked for clarification but has not responded so far: https://lore.kernel.org/all/20231220090910.GA32182@wunner.de/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
2023-10-13ARM: dts: aspeed: mtmitchell: Add I2C NVMe alias portChanh Nguyen1-0/+267
Adds the I2C alias ports to each NVMe drive via the backplane card. Besides that, it also adds the eeprom and temperature sensor on the backplane card. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231005035525.19036-8-chanh@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-10-13ARM: dts: aspeed: mtmitchell: Remove redundant ADC configurationsChanh Nguyen1-14/+1
Mt.Mitchell DVT and later hardware do not use adc1. It only uses adc0 with channels 0, 1 and 2. This commit removes redundant ADC configurations. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231005035525.19036-7-chanh@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2023-10-13ARM: dts: aspeed: mtmitchell: Add inlet temperature sensorChanh Nguyen1-0/+5
Add the inlet temperature at address 0x48, which is connected via BMC I2C8. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20231005035525.19036-6-chanh@os.amperecomputing.com Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 04:12:40 +0300