summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
AgeCommit message (Collapse)AuthorFilesLines
2022-05-19ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIOBrandon Wyman1-1/+1
The IBM Everest and Rainier systems have a GPIO line that goes to the power supplies. It has a dual function: 1) Fans Full Speed, and 2) Sync input history. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220421213638.1151193-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-28ARM: dts: aspeed: p10bmc: Enable ftrace in ramoops bufferEddie James1-1/+2
Increase the size of the buffer and set the ftrace-size property in order to collect event tracing during a crash. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211202224525.29178-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-28ARM: dts: aspeed: rainer: Add RTC battery gpio nameJoel Stanley1-1/+1
This is the documented name used for OpenBMC systems: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#rtc-battery-voltage-read-enable Link: https://lore.kernel.org/r/20220222041559.68651-2-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-28ARM: dts: aspeed: rainier: Remove SPI NOR controllersJoel Stanley1-24/+0
Early Rainier builds had SPI NOR as a fallback boot device when eMMC was not programmed. Most systems don't have the NOR populated, so remove it from the device tree as it is not used. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220120063307.63898-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-21ARM: dts: aspeed: rainier: Label reset-cause-pinhole GPIOAndrew Geissler1-1/+1
This GPIO is used on the rainier system to indicate the BMC was reset due to a physical pinhole reset. See the following doc for more information: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Link: https://lore.kernel.org/r/20220113211735.37861-1-geissonator@yahoo.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-01-31ARM: dts: aspeed: rainier and everest: Enable UHCIEddie James1-0/+4
The UHCI controller is necessary to talk to slower, USB1.1 devices, so enable the UHCI controller in the device tree. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20220128214852.21551-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-12-21ARM: dts: aspeed: p10: Add TPM deviceEddie James1-0/+5
Add the Nuvoton NPCT75X, a TIS I2C TPM. Modified Eddie's change to include the general compatible string, and combine the rainier and everest patches. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211208191758.20517-8-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-12-21ARM: dts: aspeed: p10: Enable USB host portsEddie James1-0/+6
Ensure both controllers are enabled on, and add GPIO hog for USB power control to set the USB power to always on. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211208170641.13322-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Enable earlyconJoel Stanley1-1/+1
Rainier was missed when enabling all of the other machines in commit 239566b032f3 ("ARM: dts: aspeed: Set earlycon boot argument"). Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add front panel LEDsJoel Stanley1-0/+42
These were meant to be part of commit 4fb27b3f9176 ("ARM: dts: aspeed: rainier: Add system LEDs") but went missing. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add 'factory-reset-toggle' as GPIOF6Isaac Kurth1-1/+1
The state of this GPIO determines whether a factory reset has been requested. If a physical switch is used, it can be high or low. During boot, the software checks and records the state of this switch. If it is different than the previous recorded state, then the read-write portions of memory are reformatted. Signed-off-by: Isaac Kurth <isaac.kurth@ibm.com> Reviewed-by: Adriana Kobylak <anoo@us.ibm.com> Link: https://lore.kernel.org/r/20210714214741.1547052-1-blisaac91@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Remove PSU gpio-keysB. J. Wyman1-28/+0
Remove the gpio-keys entries for the power supply presence lines from the Rainier device tree. The user space applications are going to change from using libevdev to libgpiod. Signed-off-by: B. J. Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210623230401.3050076-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7Eddie James1-7/+0
Only the pass 1 Ingraham board (Rainier system) had a micro-controller wired to GPIOP7 on ball Y23. Pass 2 boards have this ball wired to the heartbeat LED, so remove the hog as this device tree supports pass 2. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210915214738.34382-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add eeprom on bus 12Eddie James1-0/+5
The devicetree was missing an eeprom. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210915214738.34382-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Enable KCS channel 2Andrew Jeffery1-0/+5
Rainier uses KCS channel 2 as the source for the debug-trigger application outlined at [1] and implemented at [2]. [1] https://github.com/openbmc/docs/blob/master/designs/bmc-service-failure-debug-and-recovery.md [2] https://github.com/openbmc/debug-trigger Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-8-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Use KCS 3 for MCTP bindingAndrew Jeffery1-0/+6
The MCTP LPC driver was loaded by hacking up the compatible in the devicetree node for KCS 4. With the introduction of the raw KCS driver this hack is no-longer required. Use the regular compatible string for KCS 4 and configure the appropriate SerIRQ. The reset state of the status bits on KCS 4 is inappropriate for the MCTP LPC binding. Switch to KCS 3 which has a different reset behaviour. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier and everest: Remove PCA gpio specificationEddie James1-535/+0
Specifying gpio nodes under PCA led controllers no longer does anything, so remove those nodes in the device trees. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node nameEddie James1-1/+1
In keeping with previous systems, call the iio-hwmon bridge node "iio-hwmon-battery" to distinguish it as the battery voltage sensor. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-12ARM: dts: aspeed: rainier: Add power-config-full-load gpioAdriana Kobylak1-0/+13
Add the power-config-full-load described in: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load The power-config-full-load gpio is designed to be used to specify how many power supplies the system should have, in rainier it is 2 or 4. If enough power supplies fail so that the system no longer has redundancy (no longer n+1), the hardware will signal to the Onboard Chip Controller that the system may be oversubscribed, and performance may need to be reduced so the system can maintain it's powered on state. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211005192226.213539-1-anoo@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-08ARM: dts: aspeed: p10bmc: Define secure boot gpioJoel Stanley1-1/+1
Input pin that indicates that the BMC is configured to boot with security protections enforced. Pulled up by default (secure). Placing the jumper will pull the pin down (bypass security). When in the secure boot state, it makes the EEPROM at 0x50 on bus 14 read only. Link: https://lore.kernel.org/r/20210923074606.283393-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and EverestEddie James1-0/+15
Add the ADC nodes to the AST2600 devicetree. Enable ADC1 for Rainier and Everest systems and add an iio-hwmon node for the 7th channel to report the battery voltage. Tested on Rainier: ~# cat /sys/class/hwmon/hwmon11/in1_input 1347 Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210916210045.31769-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: rainier: Define name for gpio line Q2Ben Tyner1-1/+1
gpio-line-names Q2 set to regulator-standby-faulted Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-2-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14ARM: dts: aspeed: rainier: Add system LEDsEddie James1-12/+1121
Add all the missing system LEDs. These are all connected by GPIO expanders. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210903214836.48286-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-17ARM: dts: aspeed: p10bmc: Add power control pinsJim Wright1-1/+1
Add to p10bmc systems the GPIO line names used in chassis power on / off control and chassis power good monitoring. Names used are as documented at [1]. [1] https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md Signed-off-by: Jim Wright <jlwright@us.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210816160002.18645-1-jlwright@us.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-28ARM: dts: rainier, everest: Add TPM reset GPIOJoel Stanley1-1/+1
The GPIO is used to place the BMC-connected TPM in reset. This state is latched until the BMC is next reset, blocking access to the TPM for that boot. On both machines this net is called TPM_RESET_LATCH_B. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210727033319.473152-2-joel@jms.id.au
2021-06-24ARM: dts: aspeed: Fix AST2600 machines line namesJoel Stanley1-4/+1
Tacoma and Rainier both have a line-names array that is too long: gpio gpiochip0: gpio-line-names is length 232 but should be at most length 208 This was probably copied from an AST2500 device tree that did have more GPIOs on the controller. Fixes: e9b24b55ca4f ("ARM: dts: aspeed: rainier: Add gpio line names") Fixes: 2f68e4e7df67 ("ARM: dts: aspeed: tacoma: Add gpio line names") Link: https://lore.kernel.org/r/20210624090742.56640-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16ARM: dts: aspeed: Rainier: Update to pass 2 hardwareEddie James1-40/+153
Add the muxes present in pass 2 and remove the eeproms that were removed. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16ARM: dts: aspeed: Rainier: Fix humidity sensor bus addressEddie James1-2/+2
The si7021 was incorrectly placed at 0x20 on i2c bus 7. It is at 0x40. Fixes: 9c44db7096e0 ("ARM: dts: aspeed: rainier: Add i2c devices") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8Eddie James1-99/+10
The second presence detection PCA9552 was incorrectly added to bus 9. Fixes: 8be44de6f209 ("ARM: dts: aspeed: Rainier: Add presence GPIOs") Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add Rainier 1S4U machineEddie James1-1/+1
The 1S4U version of the Rainier system has only 4 fans. Create a new tree, include the 4U version, and delete the 2 extra fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-23-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add missing fan nodesJoel Stanley1-0/+12
The Maxim fan controller has six fans attached. Two of these were missing from the description. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Enable fan watchdogEddie James1-0/+14
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add presence GPIOsAlpana Kumari1-8/+248
This commit adds presence detect GPIO chips for various FRUs on Rainier. Also, correct the I2C address for the tca9554. Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add additional processor CFAMsEddie James1-2/+281
Rainier has two dual-chip modules and therefore four CFAMs with their associated engines. Add these to the devicetree with the i2c busses that have devices on them. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add gpio-keys-polled for fansBrandon Wyman1-0/+43
Add a gpio-keys-polled section to the Rainier device tree for the fan presence signals on the PCA9552 I2C device on bus 7. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add directly controlled LEDsVishwanatha Subbanna1-2/+26
These LEDs are directly connected to the BMC's GPIO bank. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-15ARM: dts: aspeed: align GPIO hog names with dtschemaKrzysztof Kozlowski1-1/+1
dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210212162640.66677-2-krzk@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09ARM: dts: aspeed: rainier: Add eMMC clock phase compensationAndrew Jeffery1-0/+1
Determined by scope measurements at speed. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201208012615.2717412-7-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: aspeed: rainier: Don't shout addressesAndrew Jeffery1-2/+2
Make them lowercase. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201002063414.275161-4-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restrictedEddie James1-0/+6
Some of the FSI-attached SPI controllers can't use the loop command due to security requirements. Indicate this in the devicetree with the restricted compatible string. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20201102194713.14812-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-19ARM: dts: rainier: Add reserved memory for ramoopsAndrew Jeffery1-0/+9
Reserve a 1.5MiB region of memory to record kmsg dumps, console and userspace message state into 16kiB ring-buffer slots. The sizing allows for up to 16 dumps to be captured and read out. Set max-reason to KMSG_DUMP_EMERG to capture bad-path reboots. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201022014731.2035438-6-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: aspeed: rainier: Add 4U device-treeEddie James1-15/+5
Add a device-tree for the Rainier 4U system. Change the model name on the existing Rainier device-tree to 2U, and remove the two extra power supplies that are only present on the 4U system. Also add labels to the fan nodes for use in the 4U device-tree. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201028185647.14565-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-10ARM: dts: rainier: Disable internal pull-downs on eMMC pinsAndrew Jeffery1-0/+4
There's a veritable tug-of-war going on in the design, so disable one of the warring parties. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200910031143.2997298-1-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-09ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C deviceEddie James1-0/+7
Set I2C bus 7 to multi-master mode and add the panel device that will register as a slave. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200908200101.64974-6-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-08-25ARM: dts: aspeed: rainier: Enable XDMA engineEddie James1-3/+9
Fix the VGA reserved memory node, and add the XDMA engine node, enable it, and point it's memory region to the VGA memory. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Enable EHCI controllerEddie James1-1/+5
Enable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port. The power control is in place to allow the port to be disabled, for those that are worried about rogue USB sticks. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Switch OCCs to P10Eddie James1-3/+3
Rainier uses the P10 processor so the OCC binding should reflect that. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Add FSI I2C mastersJoel Stanley1-0/+21
The host processor contains i2c masters on each cfam. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Add CFAM SPI controllersEddie James1-0/+226
Add the four SPI masters on each CFAM. Each master has four 128KB EEPROM devices attached to it. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-28ARM: dts: aspeed: rainier: Add I2C buses for NVMe useJet Li1-0/+105
Adding pca9552 exposes the presence detect lines for the cards and tca9554 exposes the presence details for the cards. Signed-off-by: Jet Li <Jet.Li@ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-23 02:57:49 +0300