summaryrefslogtreecommitdiff
path: root/arch/arc
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27ARC: entry: fix syscall_trace_exit argumentSergey Matyukevich1-0/+1
commit b1c6ecfdd06907554518ec384ce8e99889d15193 upstream. Function syscall_trace_exit expects pointer to pt_regs. However r0 is also used to keep syscall return value. Restore pointer to pt_regs before calling syscall_trace_exit. Cc: <stable@vger.kernel.org> Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where neededArnd Bergmann1-0/+2
[ Upstream commit cef397038167ac15d085914493d6c86385773709 ] Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> [florian: patch arch/powerpc/include/asm/pte-common.h for 4.9.y removed arch/riscv/include/asm/pgtable.h which does not exist] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22ARC: export clear_user_page() for modulesRandy Dunlap1-1/+1
[ Upstream commit 6b5ff0405e4190f23780362ea324b250bc495683 ] 0day bot reports a build error: ERROR: modpost: "clear_user_page" [drivers/media/v4l2-core/videobuf-dma-sg.ko] undefined! so export it in arch/arc/ to fix the build error. In most ARCHes, clear_user_page() is a macro. OTOH, in a few ARCHes it is a function and needs to be exported. PowerPC exported it in 2004. It looks like nds32 and nios2 still need to have it exported. Fixes: 4102b53392d63 ("ARC: [mm] Aliasing VIPT dcache support 2/4") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03ARC: Fix CONFIG_STACKDEPOTGuenter Roeck1-0/+2
[ Upstream commit bf79167fd86f3b97390fe2e70231d383526bd9cc ] Enabling CONFIG_STACKDEPOT results in the following build error. arc-elf-ld: lib/stackdepot.o: in function `filter_irq_stacks': stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start' arc-elf-ld: stackdepot.c:(.text+0x456): undefined reference to `__irqentry_text_start' arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end' arc-elf-ld: stackdepot.c:(.text+0x476): undefined reference to `__irqentry_text_end' arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start' arc-elf-ld: stackdepot.c:(.text+0x484): undefined reference to `__softirqentry_text_start' arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end' arc-elf-ld: stackdepot.c:(.text+0x48c): undefined reference to `__softirqentry_text_end' Other architectures address this problem by adding IRQENTRY_TEXT and SOFTIRQENTRY_TEXT to the text segment, so do the same here. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22ARC: entry: fix off-by-one error in syscall number validationVineet Gupta1-2/+2
commit 3433adc8bd09fc9f29b8baddf33b4ecd1ecd2cdc upstream. We have NR_syscall syscalls from [0 .. NR_syscall-1]. However the check for invalid syscall number is "> NR_syscall" as opposed to >=. This off-by-one error erronesously allows "NR_syscall" to be treated as valid syscall causeing out-of-bounds access into syscall-call table ensuing a crash (holes within syscall table have a invalid-entry handler but this is beyond the array implementing the table). This problem showed up on v5.6 kernel when testing glibc 2.33 (v5.10 kernel capable, includng faccessat2 syscall 439). The v5.6 kernel has NR_syscalls=439 (0 to 438). Due to the bug, 439 passed by glibc was not handled as -ENOSYS but processed leading to a crash. Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/48 Reported-by: Shahab Vahedi <shahab@synopsys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28arc: kernel: Return -EFAULT if copy_to_user() failsWang Qing1-2/+2
[ Upstream commit 46e152186cd89d940b26726fff11eb3f4935b45a ] The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARCRandy Dunlap1-0/+1
[ Upstream commit 8a48c0a3360bf2bf4f40c980d0ec216e770e58ee ] fs/dax.c uses copy_user_page() but ARC does not provide that interface, resulting in a build error. Provide copy_user_page() in <asm/page.h>. ../fs/dax.c: In function 'copy_cow_page_dax': ../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Dan Williams <dan.j.williams@intel.com> #Acked-by: Vineet Gupta <vgupta@synopsys.com> # v1 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org #Reviewed-by: Ira Weiny <ira.weiny@intel.com> # v2 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23ARC: build: add boot_targets to PHONYMasahiro Yamada1-0/+1
[ Upstream commit 0cfccb3c04934cdef42ae26042139f16e805b5f7 ] The top-level boot_targets (uImage and uImage.*) should be phony targets. They just let Kbuild descend into arch/arc/boot/ and create files there. If a file exists in the top directory with the same name, the boot image will not be created. You can confirm it by the following steps: $ export CROSS_COMPILE=<your-arc-compiler-prefix> $ make -s ARCH=arc defconfig all # vmlinux will be built $ touch uImage.gz $ make ARCH=arc uImage.gz CALL scripts/atomic/check-atomics.sh CALL scripts/checksyscalls.sh CHK include/generated/compile.h # arch/arc/boot/uImage.gz is not created Specify the targets as PHONY to fix this. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29ARC: stack unwinding: don't assume non-current task is sleepingVineet Gupta1-8/+15
[ Upstream commit e42404fa10fd11fe72d0a0e149a321d10e577715 ] To start stack unwinding (SP, PC and BLINK) are needed. When the explicit execution context (pt_regs etc) is not available, unwinder assumes the task is sleeping (in __switch_to()) and fetches SP and BLINK from kernel mode stack. But this assumption is not true, specially in a SMP system, when top runs on 1 core, there may be active running processes on all cores. So when unwinding non courrent tasks, ensure they are NOT running. And while at it, handle the self unwinding case explicitly. This came out of investigation of a customer reported hang with rcutorture+top Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/31 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10Revert "ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE"Vineet Gupta1-5/+11
This reverts commit 00fdec98d9881bf5173af09aebd353ab3b9ac729. (but only from 5.2 and prior kernels) The original commit was a preventive fix based on code-review and was auto-picked for stable back-port (for better or worse). It was OK for v5.3+ kernels, but turned up needing an implicit change 68e5c6f073bcf70 "(ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause)" merged in v5.3 which itself was not backported. So to summarize the stable backport of this patch for v5.2 and prior kernels is busted and it won't boot. The obvious solution is backport 68e5c6f073bcf70 but that is a pain as it doesn't revert cleanly and each of affected kernels (so far v4.19, v4.14, v4.9, v4.4) needs a slightly different massaged varaint. So the easier fix is to simply revert the backport from 5.2 and prior. The issue was not a big deal as it would cause strace to sporadically not work correctly. Waldemar Brodkorb first reported this when running ARC uClibc regressions on latest stable kernels (with offending backport). Once he bisected it, the analysis was trivial, so thx to him for this. Reported-by: Waldemar Brodkorb <wbx@uclibc-ng.org> Bisected-by: Waldemar Brodkorb <wbx@uclibc-ng.org> Cc: stable <stable@vger.kernel.org> # 5.2 and prior Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10ARC: stack unwinding: avoid indefinite loopingVineet Gupta1-1/+6
commit 328d2168ca524d501fc4b133d6be076142bd305c upstream. Currently stack unwinder is a while(1) loop which relies on the dwarf unwinder to signal termination, which in turn relies on dwarf info to do so. This in theory could cause an infinite loop if the dwarf info was somehow messed up or the register contents were etc. This fix thus detects the excessive looping and breaks the loop. | Mem: 26184K used, 1009136K free, 0K shrd, 0K buff, 14416K cached | CPU: 0.0% usr 72.8% sys 0.0% nic 27.1% idle 0.0% io 0.0% irq 0.0% sirq | Load average: 4.33 2.60 1.11 2/74 139 | PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND | 133 2 root SWN 0 0.0 3 22.9 [rcu_torture_rea] | 132 2 root SWN 0 0.0 0 22.0 [rcu_torture_rea] | 131 2 root SWN 0 0.0 3 21.5 [rcu_torture_rea] | 126 2 root RW 0 0.0 2 5.4 [rcu_torture_wri] | 129 2 root SWN 0 0.0 0 0.2 [rcu_torture_fak] | 137 2 root SW 0 0.0 0 0.2 [rcu_torture_cbf] | 127 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 138 115 root R 1464 0.1 2 0.1 top | 130 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 128 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 115 1 root S 1472 0.1 1 0.0 -/bin/sh | 104 1 root S 1464 0.1 0 0.0 inetd | 1 0 root S 1456 0.1 2 0.0 init | 78 1 root S 1456 0.1 0 0.0 syslogd -O /var/log/messages | 134 2 root SW 0 0.0 2 0.0 [rcu_torture_sta] | 10 2 root IW 0 0.0 1 0.0 [rcu_preempt] | 88 2 root IW 0 0.0 1 0.0 [kworker/1:1-eve] | 66 2 root IW 0 0.0 2 0.0 [kworker/2:2-eve] | 39 2 root IW 0 0.0 2 0.0 [kworker/2:1-eve] | unwinder looping too long, aborting ! Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23irqchip/eznps: Fix build error for !ARC700 buildsVineet Gupta1-1/+0
[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ] eznps driver is supposed to be platform independent however it ends up including stuff from inside arch/arc headers leading to rand config build errors. The quick hack to fix this (proper fix is too much chrun for non active user-base) is to add following to nps platform agnostic header. - copy AUX_IENABLE from arch/arc header - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/** Reported-by: kernel test robot <lkp@intel.com> Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22ARC: elf: use right ELF_ARCHVineet Gupta1-1/+1
commit b7faf971081a4e56147f082234bfff55135305cb upstream. Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACEVineet Gupta1-11/+5
commit 00fdec98d9881bf5173af09aebd353ab3b9ac729 upstream. Trap handler for syscall tracing reads EFA (Exception Fault Address), in case strace wants PC of trap instruction (EFA is not part of pt_regs as of current code). However this EFA read is racy as it happens after dropping to pure kernel mode (re-enabling interrupts). A taken interrupt could context-switch, trigger a different task's trap, clobbering EFA for this execution context. Fix this by reading EFA early, before re-enabling interrupts. A slight side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler. The trap handler is common to both ARCompact and ARCv2 builds too. This just came out of code rework/review and no real problem was reported but is clearly a potential problem specially for strace. Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-11ARC: Fix ICCM & DCCM runtime size checksEugeniy Paltsev1-2/+3
[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ] As of today the ICCM and DCCM size checks are incorrectly using mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes. Fix that. Reported-by: Paul Greco <pmgreco@us.ibm.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-20ARC: define __ALIGN_STR and __ALIGN symbols for ARCEugeniy Paltsev1-0/+2
commit 8d92e992a785f35d23f845206cf8c6cafbc264e0 upstream. The default defintions use fill pattern 0x90 for padding which for ARC generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090 So use ".align 4" which insert a "nop_s" instruction instead. Cc: stable@vger.kernel.org Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15ARC: [plat-axs10x]: Add missing multicast filter number to GMAC nodeJose Abreu1-0/+1
commit 7980dff398f86a618f502378fa27cf7e77449afa upstream. Add a missing property to GMAC node so that multicast filtering works correctly. Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)") Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05arc: eznps: fix allmodconfig kconfig warningRandy Dunlap1-1/+1
[ Upstream commit 1928b36cfa4df1aeedf5f2644d0c33f3a1fcfd7b ] Fix kconfig warning for arch/arc/plat-eznps/Kconfig allmodconfig: WARNING: unmet direct dependencies detected for CLKSRC_NPS Depends on [n]: GENERIC_CLOCKEVENTS [=y] && !PHYS_ADDR_T_64BIT [=y] Selected by [y]: - ARC_PLAT_EZNPS [=y] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ofer Levi <oferle@mellanox.com> Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-28ARC: perf: Accommodate big-endian CPUAlexey Brodkin1-2/+2
commit 5effc09c4907901f0e71e68e5f2e14211d9a203f upstream. 8-letter strings representing ARC perf events are stores in two 32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc. And the same order of bytes in the word is used regardless CPU endianness. Which means in case of big-endian CPU core we need to swap bytes to get the same order as if it was on little-endian CPU. Otherwise we're seeing the following error message on boot: ------------------------->8---------------------- ARC perf : 8 counters (32 bits), 40 conditions, [overflow IRQ support] sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 sysfs_warn_dup+0x46/0x58 sysfs_add_file_mode_ns+0xb2/0x168 create_files+0x70/0x2a0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0 Failed to register pmu: arc_pct, reason -17 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 __warn+0x9c/0xd4 warn_slowpath_fmt+0x22/0x2c perf_event_sysfs_init+0x70/0xa0 ---[ end trace a75fb9a9837bd1ec ]--- ------------------------->8---------------------- What happens here we're trying to register more than one raw perf event with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters and encoded into two 32-bit words. In this particular case we deal with 2 events: * "IJMP____" which counts all jump & branch instructions * "IJMPC___" which counts only conditional jumps & branches Those strings are split in two 32-bit words this way "IJMP" + "____" & "IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core being big-endian then we read "PMJI" + "____" & "PMJI" + "___C". And since we interpret read array of ASCII letters as a null-terminated string on big-endian CPU we end up with 2 events of the same name "PMJI". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-21ARC: export "abort" for modulesVineet Gupta1-0/+1
This is a custom patch (no mainline equivalent) for stable backport only to address 0-Day kernel test infra ARC 4.x.y builds errors. The reason for this custom patch as that it is a single patch, touches only ARC, vs. atleast two 7c2c11b208be09c1, dc8635b78cd8669 which touch atleast 3 other arches (one long removed) and could potentially have a fallout. Reported-by: kbuild test robot <lkp@intel.com> CC: stable@vger.kernel.org # 4.4, 4.9 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21ARC: hide unused function unw_hdr_allocArnd Bergmann1-5/+4
commit fd5de2721ea7d16e2b16c4049ac49f229551b290 upstream. As kernelci.org reports, this function is not used in vdk_hs38_defconfig: arch/arc/kernel/unwind.c:188:14: warning: 'unw_hdr_alloc' defined but not used [-Wunused-function] Fixes: bc79c9a72165 ("ARC: dw2 unwind: Reinstante unwinding out of modules") Link: https://kernelci.org/build/id/5d1cae3f59b514300340c132/logs/ Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10ARC: handle gcc generated __builtin_trap for older compilerVineet Gupta1-0/+8
commit af1be2e21203867cb958aaceed5366e2e24b88e8 upstream. ARC gcc prior to GNU 2018.03 release didn't have a target specific __builtin_trap() implementation, generating default abort() call. Implement the abort() call - emulating what newer gcc does for the same, as suggested by Arnd. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10bug.h: work around GCC PR82365 in BUG()Arnd Bergmann1-1/+2
[ Upstream commit 173a3efd3edb2ef6ef07471397c5f542a360e9c1 ] Looking at functions with large stack frames across all architectures led me discovering that BUG() suffers from the same problem as fortify_panic(), which I've added a workaround for already. In short, variables that go out of scope by calling a noreturn function or __builtin_unreachable() keep using stack space in functions afterwards. A workaround that was identified is to insert an empty assembler statement just before calling the function that doesn't return. I'm adding a macro "barrier_before_unreachable()" to document this, and insert calls to that in all instances of BUG() that currently suffer from this problem. The files that saw the largest change from this had these frame sizes before, and much less with my patch: fs/ext4/inode.c:82:1: warning: the frame size of 1672 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/namei.c:434:1: warning: the frame size of 904 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/super.c:2279:1: warning: the frame size of 1160 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/ext4/xattr.c:146:1: warning: the frame size of 1168 bytes is larger than 800 bytes [-Wframe-larger-than=] fs/f2fs/inode.c:152:1: warning: the frame size of 1424 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_core.c:1195:1: warning: the frame size of 1068 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_core.c:395:1: warning: the frame size of 1084 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_ftp.c:298:1: warning: the frame size of 928 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_ftp.c:418:1: warning: the frame size of 908 bytes is larger than 800 bytes [-Wframe-larger-than=] net/netfilter/ipvs/ip_vs_lblcr.c:718:1: warning: the frame size of 960 bytes is larger than 800 bytes [-Wframe-larger-than=] drivers/net/xen-netback/netback.c:1500:1: warning: the frame size of 1088 bytes is larger than 800 bytes [-Wframe-larger-than=] In case of ARC and CRIS, it turns out that the BUG() implementation actually does return (or at least the compiler thinks it does), resulting in lots of warnings about uninitialized variable use and leaving noreturn functions, such as: block/cfq-iosched.c: In function 'cfq_async_queue_prio': block/cfq-iosched.c:3804:1: error: control reaches end of non-void function [-Werror=return-type] include/linux/dmaengine.h: In function 'dma_maxpq': include/linux/dmaengine.h:1123:1: error: control reaches end of non-void function [-Werror=return-type] This makes them call __builtin_trap() instead, which should normally dump the stack and kill the current process, like some of the other architectures already do. I tried adding barrier_before_unreachable() to panic() and fortify_panic() as well, but that had very little effect, so I'm not submitting that patch. Vineet said: : For ARC, it is double win. : : 1. Fixes 3 -Wreturn-type warnings : : | ../net/core/ethtool.c:311:1: warning: control reaches end of non-void function : [-Wreturn-type] : | ../kernel/sched/core.c:3246:1: warning: control reaches end of non-void function : [-Wreturn-type] : | ../include/linux/sunrpc/svc_xprt.h:180:1: warning: control reaches end of : non-void function [-Wreturn-type] : : 2. bloat-o-meter reports code size improvements as gcc elides the : generated code for stack return. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365 Link: http://lkml.kernel.org/r/20171219114112.939391-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Tested-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christopher Li <sparse@chrisli.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> [removed cris chunks - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-10ARC: fix allnoconfig build warningVineet Gupta1-1/+1
[ Upstream commit 5464d03d92601ac2977ef605b0cbb33276567daf ] Reported-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10ARC: fix build warnings with !CONFIG_KPROBESVineet Gupta2-9/+18
[ Upstream commit 4c6fabda1ad1dec6d274c098ef0a91809c74f2e3 ] | CC lib/nmi_backtrace.o | In file included from ../include/linux/kprobes.h:43:0, | from ../lib/nmi_backtrace.c:17: | ../arch/arc/include/asm/kprobes.h:57:13: warning: 'trap_is_kprobe' defined but not used [-Wunused-function] | static void trap_is_kprobe(unsigned long address, struct pt_regs *regs) | ^~~~~~~~~~~~~~ The warning started with 7d134b2ce6 ("kprobes: move kprobe declarations to asm-generic/kprobes.h") which started including <asm/kprobes.h> unconditionally into <linux/kprobes.h> exposing a stub function for !CONFIG_KPROBES to rest of world. Fix that by making the stub a macro Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20ARC: u-boot args: check that magic number is correctEugeniy Paltsev2-0/+9
[ Upstream commit edb64bca50cd736c6894cc6081d5263c007ce005 ] In case of devboards we really often disable bootloader and load Linux image in memory via JTAG. Even if kernel tries to verify uboot_tag and uboot_arg there is sill a chance that we treat some garbage in registers as valid u-boot arguments in JTAG case. E.g. it is enough to have '1' in r0 to treat any value in r2 as a boot command line. So check that magic number passed from u-boot is correct and drop u-boot arguments otherwise. That helps to reduce the possibility of using garbage as u-boot arguments in JTAG case. We can safely check U-boot magic value (0x0) in linux passed via r1 register as U-boot pass it from the beginning. So there is no backward-compatibility issues. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23ARC: uacces: remove lp_start, lp_end from clobber listVineet Gupta1-4/+4
[ Upstream commit d5e3c55e01d8b1774b37b4647c30fb22f1d39077 ] Newer ARC gcc handles lp_start, lp_end in a different way and doesn't like them in the clobber list. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23ARCv2: lib: memcpy: fix doing prefetchw outside of bufferEugeniy Paltsev1-14/+0
[ Upstream commit f8a15f97664178f27dfbf86a38f780a532cb6df0 ] ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the next cache line but doesn't ensure that the line is not past the end of the buffer. PRETECHW changes the line ownership and marks it dirty, which can cause data corruption if this area is used for DMA IO. Fix the issue by avoiding the PREFETCHW. This leads to performance degradation but it is OK as we'll introduce new memcpy implementation optimized for unaligned memory access using. We also cut off all PREFETCH instructions at they are quite useless here: * we call PREFETCH right before LOAD instruction call. * we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64) in a main logical loop. so we call PREFETCH 4 times (or 2 times) for each L1 cache line (in case of 64B L1 cache Line which is default case). Obviously this is not optimal. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ARC: fix __ffs return value to avoid build warningsEugeniy Paltsev1-3/+3
[ Upstream commit 4e868f8419cb4cb558c5d428e7ab5629cef864c7 ] | CC mm/nobootmem.o |In file included from ./include/asm-generic/bug.h:18:0, | from ./arch/arc/include/asm/bug.h:32, | from ./include/linux/bug.h:5, | from ./include/linux/mmdebug.h:5, | from ./include/linux/gfp.h:5, | from ./include/linux/slab.h:15, | from mm/nobootmem.c:14: |mm/nobootmem.c: In function '__free_pages_memory': |./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | ^ |./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck' | (__typecheck(x, y) && __no_side_effects(x, y)) | ^~~~~~~~~~~ |./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp' | __builtin_choose_expr(__safe_cmp(x, y), \ | ^~~~~~~~~~ |./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp' | #define min(x, y) __careful_cmp(x, y, <) | ^~~~~~~~~~~~~ |mm/nobootmem.c:104:11: note: in expansion of macro 'min' | order = min(MAX_ORDER - 1UL, __ffs(start)); Change __ffs return value from 'int' to 'unsigned long' as it is done in other implementations (like asm-generic, x86, etc...) to avoid build-time warnings in places where type is strictly checked. As __ffs may return values in [0-31] interval changing return type to unsigned is valid. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-27ARC: define ARCH_SLAB_MINALIGN = 8Alexey Brodkin1-0/+11
commit b6835ea77729e7faf4656ca637ba53f42b8ee3fd upstream. The default value of ARCH_SLAB_MINALIGN in "include/linux/slab.h" is "__alignof__(unsigned long long)" which for ARC unexpectedly turns out to be 4. This is not a compiler bug, but as defined by ARC ABI [1] Thus slab allocator would allocate a struct which is 32-bit aligned, which is generally OK even if struct has long long members. There was however potetial problem when it had any atomic64_t which use LLOCKD/SCONDD instructions which are required by ISA to take 64-bit addresses. This is the problem we ran into [ 4.015732] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.167881] Misaligned Access [ 4.172356] Path: /bin/busybox.nosuid [ 4.176004] CPU: 2 PID: 171 Comm: rm Not tainted 4.19.14-yocto-standard #1 [ 4.182851] [ 4.182851] [ECR ]: 0x000d0000 => Check Programmer's Manual [ 4.190061] [EFA ]: 0xbeaec3fc [ 4.190061] [BLINK ]: ext4_delete_entry+0x210/0x234 [ 4.190061] [ERET ]: ext4_delete_entry+0x13e/0x234 [ 4.202985] [STAT32]: 0x80080002 : IE K [ 4.207236] BTA: 0x9009329c SP: 0xbe5b1ec4 FP: 0x00000000 [ 4.212790] LPS: 0x9074b118 LPE: 0x9074b120 LPC: 0x00000000 [ 4.218348] r00: 0x00000040 r01: 0x00000021 r02: 0x00000001 ... ... [ 4.270510] Stack Trace: [ 4.274510] ext4_delete_entry+0x13e/0x234 [ 4.278695] ext4_rmdir+0xe0/0x238 [ 4.282187] vfs_rmdir+0x50/0xf0 [ 4.285492] do_rmdir+0x9e/0x154 [ 4.288802] EV_Trap+0x110/0x114 The fix is to make sure slab allocations are 64-bit aligned. Do note that atomic64_t is __attribute__((aligned(8)) which means gcc does generate 64-bit aligned references, relative to beginning of container struct. However the issue is if the container itself is not 64-bit aligned, atomic64_t ends up unaligned which is what this patch ensures. [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdf Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog, added dependency on LL64+LLSC] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27ARC: U-boot: check arguments paranoidlyEugeniy Paltsev2-27/+64
commit a66f2e57bd566240d8b3884eedf503928fbbe557 upstream. Handle U-boot arguments paranoidly: * don't allow to pass unknown tag. * try to use external device tree blob only if corresponding tag (TAG_DTB) is set. * don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT. NOTE: If U-boot args are invalid we skip them and try to use embedded device tree blob. We can't panic on invalid U-boot args as we really pass invalid args due to bug in U-boot code. This happens if we don't provide external DTB to U-boot and don't set 'bootargs' U-boot environment variable (which is default case at least for HSDK board) In that case we will pass {r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid. While I'm at it refactor U-boot arguments handling code. Cc: stable@vger.kernel.org Tested-by: Corentin LABBE <clabbe@baylibre.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27ARCv2: Enable unaligned access in early ASM codeEugeniy Paltsev1-0/+10
commit 252f6e8eae909bc075a1b1e3b9efb095ae4c0b56 upstream. It is currently done in arc_init_IRQ() which might be too late considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned memory accesses by default Cc: stable@vger.kernel.org #4.4+ Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote changelog] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31ARC: perf: map generic branches to correct hardware conditionEugeniy Paltsev1-1/+2
commit 3affbf0e154ee351add6fcc254c59c3f3947fa8f upstream. So far we've mapped branches to "ijmp" which also counts conditional branches NOT taken. This makes us different from other architectures such as ARM which seem to be counting only taken branches. So use "ijmptak" hardware condition which only counts (all jump instructions that are taken) 'ijmptak' event is available on both ARCompact and ARCv2 ISA based cores. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31ARCv2: lib: memeset: fix doing prefetchw outside of bufferEugeniy Paltsev1-8/+32
commit e6a72b7daeeb521753803550f0ed711152bb2555 upstream. ARCv2 optimized memset uses PREFETCHW instruction for prefetching the next cache line but doesn't ensure that the line is not past the end of the buffer. PRETECHW changes the line ownership and marks it dirty, which can cause issues in SMP config when next line was already owned by other core. Fix the issue by avoiding the PREFETCHW Some more details: The current code has 3 logical loops (ignroing the unaligned part) (a) Big loop for doing aligned 64 bytes per iteration with PREALLOC (b) Loop for 32 x 2 bytes with PREFETCHW (c) any left over bytes loop (a) was already eliding the last 64 bytes, so PREALLOC was safe. The fix was removing PREFETCW from (b). Another potential issue (applicable to configs with 32 or 128 byte L1 cache line) is that PREALLOC assumes 64 byte cache line and may not do the right thing specially for 32b. While it would be easy to adapt, there are no known configs with those lie sizes, so for now, just compile out PREALLOC in such cases. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: stable@vger.kernel.org #4.4+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote changelog, used asm .macro vs. "C" macro] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21ARC: io.h: Implement reads{x}()/writes{x}()Jose Abreu1-0/+72
[ Upstream commit 10d443431dc2bb733cf7add99b453e3fb9047a2e ] Some ARC CPU's do not support unaligned loads/stores. Currently, generic implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC. This can lead to misfunction of some drivers as generic functions do a plain dereference of a pointer that can be unaligned. Let's use {get/put}_unaligned() helpers instead of plain dereference of pointer in order to fix. The helpers allow to get and store data from an unaligned address whilst preserving the CPU internal alignment. According to [1], the use of these helpers are costly in terms of performance so we added an initial check for a buffer already aligned so that the usage of the helpers can be avoided, when possible. [1] Documentation/unaligned-memory-access.txt Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David Laight <David.Laight@ACULAB.COM> Tested-by: Vitor Soares <soares@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13ARC: [zebu] Remove CONFIG_INITRAMFS_SOURCE from defconfigsAlexey Brodkin2-2/+0
Zebu boards were added in v4.9 and then renamed to "haps" in v4.10. Thus backporting commit 64234961c145 (ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigs) we missed "zebu" defconfigs in v4.9. Note this is only applicable to "linux-4.9.y"! Spotted by KerneCI, see [1]. [1] https://storage.kernelci.org/stable/linux-4.9.y/v4.9.144/arc/zebu_hs_smp_defconfig/build.log Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-08arc: [devboards] Add support of NFSv3 ACLAlexey Brodkin9-0/+9
commit 6b04114f6fae5e84d33404c2970b1949c032546e upstream. By default NFSv3 doesn't support ACL (Access Control Lists) which might be quite convenient to have so that mounted NFS behaves exactly as any other local file-system. In particular missing support of ACL makes umask useless. This among other thigs fixes Glibc's "nptl/tst-umask1". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Cupertino Miranda <cmiranda@synopsys.com> Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-08ARC: change defconfig defaults to ARCv2Kevin Hilman7-2/+7
commit b7cc40c32a8bfa6f2581a71747f6a7d491fe43ba upstream. Change the default defconfig (used with 'make defconfig') to the ARCv2 nsim_hs_defconfig, and also switch the default Kconfig ISA selection to ARCv2. This allows several default defconfigs (e.g. make defconfig, make allnoconfig, make tinyconfig) to all work with ARCv2 by default. Note since we change default architecture from ARCompact to ARCv2 it's required to explicitly mention architecture type in ARCompact defconfigs otherwise ARCv2 will be implied and binaries will be generated for ARCv2. Cc: <stable@vger.kernel.org> # 4.4.x Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-20ARC: build: Don't set CROSS_COMPILE in arch's MakefileAlexey Brodkin1-9/+1
commit 40660f1fcee8d524a60b5101538e42b1f39f106d upstream. There's not much sense in doing that because if user or his build-system didn't set CROSS_COMPILE we still may very well make incorrect guess. But as it turned out setting CROSS_COMPILE is not as harmless as one may think: with recent changes that implemented automatic discovery of __host__ gcc features unconditional setup of CROSS_COMPILE leads to failures on execution of "make xxx_defconfig" with absent cross-compiler, for more info see [1]. Set CROSS_COMPILE as well gets in the way if we want only to build .dtb's (again with absent cross-compiler which is not really needed for building .dtb's), see [2]. Note, we had to change LIBGCC assignment type from ":=" to "=" so that is is resolved on its usage, otherwise if it is resolved at declaration time with missing CROSS_COMPILE we're getting this error message from host GCC: | gcc: error: unrecognized command line option -mmedium-calls | gcc: error: unrecognized command line option -mno-sdata [1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-September/004308.html [2] http://lists.infradead.org/pipermail/linux-snps-arc/2018-September/004320.html Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-20ARC: build: Get rid of toolchain checkAlexey Brodkin1-14/+0
commit 615f64458ad890ef94abc879a66d8b27236e733a upstream. This check is very naive: we simply test if GCC invoked without "-mcpu=XXX" has ARC700 define set. In that case we think that GCC was built with "--with-cpu=arc700" and has libgcc built for ARC700. Otherwise if ARC700 is not defined we think that everythng was built for ARCv2. But in reality our life is much more interesting. 1. Regardless of GCC configuration (i.e. what we pass in "--with-cpu" it may generate code for any ARC core). 2. libgcc might be built with explicitly specified "--mcpu=YYY" That's exactly what happens in case of multilibbed toolchains: - GCC is configured with default settings - All the libs built for many different CPU flavors I.e. that check gets in the way of usage of multilibbed toolchains. And even non-multilibbed toolchains are affected. OpenEmbedded also builds GCC without "--with-cpu" because each and every target component later is compiled with explicitly set "-mcpu=ZZZ". Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ARC: clone syscall to setp r25 as thread pointerVineet Gupta1-0/+20
commit c58a584f05e35d1d4342923cd7aac07d9c3d3d16 upstream. Per ARC TLS ABI, r25 is designated TP (thread pointer register). However so far kernel didn't do any special treatment, like setting up usermode r25, even for CLONE_SETTLS. We instead relied on libc runtime to do this, in say clone libc wrapper [1]. This was deliberate to keep kernel ABI agnostic (userspace could potentially change TP, specially for different ARC ISA say ARCompact vs. ARCv2 with different spare registers etc) However userspace setting up r25, after clone syscall opens a race, if child is not scheduled and gets a signal instead. It starts off in userspace not in clone but in a signal handler and anything TP sepcific there such as pthread_self() fails which showed up with uClibc testsuite nptl/tst-kill6 [2] Fix this by having kernel populate r25 to TP value. So this locks in ABI, but it was not going to change anyways, and fwiw is same for both ARCompact (arc700 core) and ARCvs (HS3x cores) [1] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/tree/libc/sysdeps/linux/arc/clone.S [2] https://github.com/wbx-github/uclibc-ng-test/blob/master/test/nptl/tst-kill6.c Fixes: ARC STAR 9001378481 Cc: stable@vger.kernel.org Reported-by: Nikita Sobolev <sobolev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10ARC: atomics: unbork atomic_fetch_##op()Will Deacon1-1/+1
[ Upstream commit 3fcbb8260a87efb691d837e8cd24e81f65b3eb70 ] In 4.19-rc1, Eugeniy reported weird boot and IO errors on ARC HSDK | INFO: task syslogd:77 blocked for more than 10 seconds. | Not tainted 4.19.0-rc1-00007-gf213acea4e88 #40 | "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this | message. | syslogd D 0 77 76 0x00000000 | | Stack Trace: | __switch_to+0x0/0xac | __schedule+0x1b2/0x730 | io_schedule+0x5c/0xc0 | __lock_page+0x98/0xdc | find_lock_entry+0x38/0x100 | shmem_getpage_gfp.isra.3+0x82/0xbfc | shmem_fault+0x46/0x138 | handle_mm_fault+0x5bc/0x924 | do_page_fault+0x100/0x2b8 | ret_from_exception+0x0/0x8 He bisected to 84c6591103db ("locking/atomics, asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()") This commit however only unmasked the real issue introduced by commit 4aef66c8ae9 ("locking/atomic, arch/arc: Fix build") which missed the retry-if-scond-failed branch in atomic_fetch_##op() macros. The bisected commit started using atomic_fetch_##op() macros for building the rest of atomics. Fixes: 4aef66c8ae9 ("locking/atomic, arch/arc: Fix build") Reported-by: Eugeniy Paltsev <paltsev@synopsys.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: wrote changelog] Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19ARC: [plat-axs*]: Enable SWAPAlexey Brodkin3-3/+0
commit c83532fb0fe053d2e43e9387354cb1b52ba26427 upstream. SWAP support on ARC was fixed earlier by commit 6e3761145a9b ("ARC: Fix CONFIG_SWAP") so now we may safely enable it on platforms that have external media like USB and SD-card. Note: it was already allowed for HSDK Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org # 6e3761145a9b: ARC: Fix CONFIG_SWAP Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05arc: fix type warnings in arc/mm/cache.cRandy Dunlap1-3/+4
[ Upstream commit ec837d620c750c0d4996a907c8c4f7febe1bbeee ] Fix type warnings in arch/arc/mm/cache.c. ../arch/arc/mm/cache.c: In function 'flush_anon_page': ../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion] __flush_dcache_page((phys_addr_t)page_address(page), page_address(page)); ^~~~~~~~~~~~~~~~~~ ../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *' void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr) ~~~~~~~~~~~~~~^~~~~ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi <eladkan@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Ofer Levi <oferle@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05arc: fix build errors in arc/include/asm/delay.hRandy Dunlap1-0/+3
[ Upstream commit 2423665ec53f2a29191b35382075e9834288a975 ] Fix build errors in arch/arc/'s delay.h: - add "extern unsigned long loops_per_jiffy;" - add <asm-generic/types.h> for "u64" In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~ In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~~~~~~~~~~~~~ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi <eladkan@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Ofer Levi <oferle@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05arc: [plat-eznps] fix data type errors in platform headersRandy Dunlap1-0/+1
[ Upstream commit b1f32ce1c3d2c11959b7e6a2c58dc5197c581966 ] Add <linux/types.h> to fix build errors. Both ctop.h and <soc/nps/common.h> use u32 types and cause many errors. Examples: ../include/soc/nps/common.h:71:4: error: unknown type name 'u32' u32 __reserved:20, cluster:4, core:4, thread:4; ../include/soc/nps/common.h:76:3: error: unknown type name 'u32' u32 value; ../include/soc/nps/common.h:124:4: error: unknown type name 'u32' u32 base:8, cl_x:4, cl_y:4, ../include/soc/nps/common.h:127:3: error: unknown type name 'u32' u32 value; ../arch/arc/plat-eznps/include/plat/ctop.h:83:4: error: unknown type name 'u32' u32 gen:1, gdis:1, clk_gate_dis:1, asb:1, ../arch/arc/plat-eznps/include/plat/ctop.h:86:3: error: unknown type name 'u32' u32 value; ../arch/arc/plat-eznps/include/plat/ctop.h:93:4: error: unknown type name 'u32' u32 csa:22, dmsid:6, __reserved:3, cs:1; ../arch/arc/plat-eznps/include/plat/ctop.h:95:3: error: unknown type name 'u32' u32 value; Cc: linux-snps-arc@lists.infradead.org Cc: Ofer Levi <oferle@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ARC: Improve cmpxchg syscall implementationPeter Zijlstra1-11/+36
[ Upstream commit e8708786d4fe21c043d38d760f768949a3d71185 ] This is used in configs lacking hardware atomics to emulate atomic r-m-w for user space, implemented by disabling preemption in kernel. However there are issues in current implementation: 1. Process not terminated if invalid user pointer passed: i.e. __get_user() failed. 2. The reason for this patch was __put_user() failure not being handled either, specifically for the COW break scenario. The zero page is initially wired up and read from __get_user() succeeds. A subsequent write by __put_user() induces a Protection Violation, but COW can't finish as Linux page fault handler is disabled due to preempt disable. And what's worse is we silently return the stale value to user space. Fix this specific case by re-enabling preemption and explicitly fixing up the fault and retrying the whole sequence over. Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-arch@vger.kernel.org Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote the changelog] Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ARC: Enable machine_desc->init_per_cpu for !CONFIG_SMPAlexey Brodkin2-3/+1
[ Upstream commit 2f24ef7413a4d91657ef04e77c27ce0b313e6c95 ] machine_desc->init_per_cpu() hook is supposed to be per cpu initialization and would seem to apply equally to UP and/or SMP. Infact the comment in header file seems to suggest it works for UP too, which was not the case and this patch. This enables !CONFIG_SMP build for platforms such as hsdk. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: trimmeed changelog] Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ARC: Explicitly add -mmedium-calls to CFLAGSAlexey Brodkin1-14/+1
[ Upstream commit 74c11e300c103af47db5b658fdcf28002421e250 ] GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default thus we don't see any problems during Linux kernel compilation. ----------------------------->8------------------------ arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [enabled] ----------------------------->8------------------------ But if we try to use so-called Elf32 toolchain with GCC configured for arc*-*-elf* then we'd see the following failure: ----------------------------->8------------------------ init/do_mounts.o: In function 'init_rootfs': do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o arc-elf32-ld: final link failed: Symbol needs debug section which does not exist make: *** [vmlinux] Error 1 ----------------------------->8------------------------ That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in Elf32 GCC: ----------------------------->8------------------------ arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [disabled] ----------------------------->8------------------------ Now to make it possible to use Elf32 toolchain for building Linux kernel we're explicitly add "-mmedium-calls" to CFLAGS. And since we add "-mmedium-calls" to the global CFLAGS there's no point in having per-file copies thus removing them. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigsAlexey Brodkin9-9/+0
commit 64234961c145606b36eaa82c47b11be842b21049 upstream. We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path to intramfs in ARC defconfigs. This was quite convenient for in-house development but not that convenient for newcomers who obviusly don't have folders like "arc_initramfs" next to the Linux source tree. Which leads to quite surprising failure of defconfig building: ------------------------------->8----------------------------- ../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/' ../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed make[2]: *** [usr/initramfs_data.cpio.gz] Error 1 ------------------------------->8----------------------------- So now when more and more people start to deal with our defconfigs let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-03 10:58:20 +0300