| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge the tag pm-runtime-6.17-rc1 from
git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
This is needed to allow additional changes to the mmc subsystem to be
queued for v6.17 too.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add myself as the maintainer for the Renesas RSCI device tree binding,
as Thierry Bultel no longer works for Renesas.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630202323.279809-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update the RSCI binding to support an optional secondary clock input on
the RZ/T2H SoC. At boot, the RSCI operates using the default synchronous
clock (PCLKM core clock), which is enabled by the bootloader. However, to
support a wider range of baud rates, the hardware also requires an
asynchronous external clock input. Clock selection is controlled
internally by the CCR3 register in the RSCI block.
Due to an incomplete understanding of the hardware, the original binding
defined only a single clock ("fck"), which is insufficient to describe the
full capabilities of the RSCI on RZ/T2H. This update corrects the binding
by allowing up to three clocks and defining the `clock-names` as
"operation", "bus", and optionally "sck" for the asynchronous clock input.
This is an ABI change, as it modifies the expected number and names of
clocks. However, since there are no in-kernel consumers of this binding
yet, the change is considered safe and non-disruptive.
Also remove the unneeded `serial0` alias from the DTS example and use
the R9A09G077_CLK_PCLKM macro for core clock.
Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250630202323.279809-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
R-Car X5H (R8A78000) SoC has the R-Car Gen5 compatible SCIF and
HSCIF ports, so document the SoC specific bindings.
[Kuninori: tidyup for upstreaming]
Signed-off-by: Nghia Nguyen <nghia.nguyen.jg@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/87ecuxdggq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the RPMh Power Domains on the Milos (e.g. SM7635) SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250707-sm7635-rpmhpd-v2-1-b4aa37acb065@fairphone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The CMA heap's name in devtmpfs can vary depending on how the heap is
defined. Its name defaults to "reserved", but if a CMA area is defined
in the devicetree, the heap takes on the devicetree node's name, such as
"default-pool" or "linux,cma". To simplify naming, unconditionally name
it "default_cma_region", but keep a legacy node in place backed by the
same underlying allocator for backwards compatibility.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20250610131231.1724627-4-jkangas@redhat.com
|
|
Code snippets should be wrapped in double backticks to follow
reStructuredText semantics; the use of single backticks uses the
:title-reference: role by default, which isn't quite what we want.
Add double backticks to code snippets to fix this.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20250610131231.1724627-2-jkangas@redhat.com
|
|
to pick up the __GENMASK() fix, otherwise the AUX clock VDSO patches fail
to compile for compat.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
|
|
Document the binding for TI K3 BIST (Built-In Self Test) block.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20250605063506.2005637-2-n-francis@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The PLPKS enabled PowerVM LPAR sysfs exposes all of the secure boot
secvars irrespective of the key management mode.
The PowerVM LPAR supports static and dynamic key management for secure
boot. The key management option can be updated in the management
console. The secvars PK, trustedcadb, and moduledb can be consumed both
in the static and dynamic key management modes for the loading of signed
third-party kernel modules. However, other secvars i.e. KEK, grubdb,
grubdbx, sbat, db and dbx, which are used to verify the grub and kernel
images, are consumed only in the dynamic key management mode.
Expose only PK, trustedcadb, and moduledb in the static key management
mode.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-3-ssrish@linux.ibm.com
|
|
On a PLPKS enabled PowerVM LPAR, the secvar format property for static
key management is misrepresented as "ibm,plpks-sb-unknown", creating
reason for confusion.
Static key management mode uses fixed, built-in keys. Dynamic key
management mode allows keys to be updated in production to handle
security updates without firmware rebuilds.
Define a function named plpks_get_sb_keymgmt_mode() to retrieve the
key management mode based on the existence of the SB_VERSION property
in the firmware.
Set the secvar format property to either "ibm,plpks-sb-v<version>" or
"ibm,plpks-sb-v0" based on the key management mode, and return the
length of the secvar format property.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-2-ssrish@linux.ibm.com
|
|
Add missing 'minItems: 1' to iommus property of the Altera SOCFPGA SoC
implementation of the Synopsys DWMAC.
Fixes: 6d359cf464f4 ("dt-bindings: net: Convert socfpga-dwmac bindings to yaml")
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250707154409.15527-1-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This ethernet controller is using fixed links for DSA switches
in two already existing device trees, so make sure the checker
does not complain like this:
intel-ixp42x-linksys-wrv54g.dtb: ethernet@c8009000 (intel,ixp4xx-ethernet):
'fixed-link' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
intel-ixp42x-usrobotics-usr8200.dtb: ethernet@c800a000 (intel,ixp4xx-ethernet):
'fixed-link' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507040609.K9KytWBA-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250704-ixp4xx-ethernet-binding-fix-v1-1-8ac360d5bc9b@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instances of the Falcon microcontroller appear in modern Nvidia GPUs and
are crucial to the GPU boot process. Document some concepts which will
make nova-core boot code easier to digest. All the information is
derived from public sources such as public documents, OpenRM and Nouveau
code.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-8-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add explanation of fwsec with diagrams. This helps clarify how the
nova-core falcon boot works.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-7-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
devinit is mentioned in the code. This patch explains it so it is clear
what it does. devinit is not only essential at boot-time, but also at
runtime due to suspend-resume and things like re-clocking.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-6-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add detailed explanation and block diagrams of the layout of the vBIOS
on Nvidia GPUs. This is important to understand how nova-core boots an
Nvidia GPU.
[ Applied Timur Tabi's feedback on providing link to BIT documentation. ]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-5-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Document the requirements for booting a kernel on a system implementing
a GICv5 interrupt controller.
Specifically, other than DT/ACPI providing the required firmware
representation, define what traps must be disabled if the kernel is
booted at EL1 on a system where EL2 is implemented.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-30-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The GICv5 interrupt controller architecture is composed of:
- one or more Interrupt Routing Service (IRS)
- zero or more Interrupt Translation Service (ITS)
- zero or more Interrupt Wire Bridge (IWB)
Describe a GICv5 implementation by specifying a top level node
corresponding to the GICv5 system component.
IRS nodes are added as GICv5 system component children.
An ITS is associated with an IRS so ITS nodes are described
as IRS children - use the hierarchy explicitly in the device
tree to define the association.
IWB nodes are described as a separate schema.
An IWB is connected to a single ITS, the connection is made explicit
through the msi-parent property and therefore is not required to be
explicit through a parent-child relationship in the device tree.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-1-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As RACK-TLP was published as a standards-track RFC8985,
so the outdated ref draft-ietf-tcpm-rack need to be updated.
Signed-off-by: Xin Guo <guoxin0309@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250705163647.301231-1-guoxin0309@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To use the Branch Record Buffer Extension (BRBE), some configuration is
necessary at EL3 and EL2. This patch documents the requirements and adds
the initial EL2 setup code, which largely consists of configuring the
fine-grained traps and initializing a couple of BRBE control registers.
Before this patch, __init_el2_fgt() would initialize HDFGRTR_EL2 and
HDFGWTR_EL2 with the same value, relying on the read/write trap controls
for a register occupying the same bit position in either register. The
'nBRBIDR' trap control only exists in bit 59 of HDFGRTR_EL2, while bit
59 of HDFGWTR_EL2 is RES0, and so this assumption no longer holds.
To handle HDFGRTR_EL2 and HDFGWTR_EL2 having (slightly) different bit
layouts, __init_el2_fgt() is changed to accumulate the HDFGRTR_EL2 and
HDFGWTR_EL2 control bits separately. While making this change the
open-coded value (1 << 62) is replaced with
HDFG{R,W}TR_EL2_nPMSNEVFR_EL1_MASK.
The BRBCR_EL1 and BRBCR_EL2 registers are unusual and require special
initialisation: even though they are subject to E2H renaming, both have
an effect regardless of HCR_EL2.TGE, even when running at EL2. So we
must initialize BRBCR_EL2 in case we run in nVHE mode. This is handled
in __init_el2_brbe() with a comment to explain the situation.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[Mark: rewrite commit message, fix typo in comment]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-2-e7775563036e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Rename the compatible string to align with the datasheets. A fix for
the device trees will be sent separately.
Fixes: 0454b9057e98 ("dt-bindings: net: sun8i-emac: Add A523 EMAC0 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250628054438.2864220-2-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/xygdnynf7m55p7d27ovzqtdjaa7pua3bxuk5c22cnmoovaji5e@tarta.nabijaczleweli.xyz
|
|
Remove duplicate word size in bootconfig.rst
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250705151618.4806-1-sumeet4linux@gmail.com
|
|
We no longer support Python 2 in the docs build chain at all, so we
certainly do not need to admonish folks to keep this file working with it.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-7-corbet@lwn.net
|
|
pktcdvd got killed in a previous commit, remove the reference to it as
well in the cdrom documentation.
Fixes: 1cea5180f2f8 ("block: remove pktcdvd driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new netlink parameter 'HANDSHAKE_A_ACCEPT_KEYRING' to provide
the serial number of the keyring to use.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250701144657.104401-1-hare@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.17
CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes
Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.
DP:
- major rework of the I/O accessors
DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X
DSI:
- SM8750 support
GPU:
- speedbin support for X1-85
- X1-45 support
MDSS:
- SM8750 support
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com
|
|
Document uses only single whitespace after full stop, so fix
inconsistency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Devicetree bindings are supposed to be specific in terms of compatibles
and other properties. Short "specific" has many implications, so extend
the description to cover them:
1. Mention no family names and avoid generic SoC fallbacks in
compatible. The list grew, mixing DO's and DON'T's, so split it into
multiple items.
2. No properties implied by the compatible.
3. Document desired lack of ABI impact and acceptable solution if such
needs arises: clearly marking it in commit msg.
All above follows established Devicetree bindings maintainers review
practice, so no new rules in practice are introduced here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
When speaking about compatibles for new devices comparing to "prior
implementations", usually we expect new device to come with more
features, thus logically it is a superset, not subset, of "prior
implementations".
Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull #2 for v6.17:
Features and functionality:
- Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe)
- Add initial flip queue implementation, disabled by default, for LNL and PTL
(Ville)
- Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt
Atwood, Dnyaneshwar)
- Extend drm_panel and follower support to DDI eDP (Arun)
Refactoring and cleanups:
- Make all global state objects opaque (Jani)
- Move display works to display specific unordered workqueue (Luca)
- Add and use struct drm_device based pcode interface (Jani, Lucas)
- Use clamp() instead of max()+min() combo (Ankit)
- Simplify wait for power well disable (Jani)
- Various stylistics cleanups and renames (Jani)
Fixes:
- Deal with loss of pipe DMC state (Ville)
- Fix PTL HDCP2 stream status check (Suraj)
- Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa)
- Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann)
- Fix PCON capability reads on non-branch devices (Chaitanya)
- Fix which platforms have ultra joiner (Ankit)
DRM core changes:
- Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe)
- Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support
(Jocelyn Falempe)
Merges:
- Backmerge drm-next for drm_panel and xe changes (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
|
|
In LACP mode with broadcast_neighbor enabled, after LACP protocol
recovery, the port can transmit packets. However, if the bond port
doesn't send gratuitous ARP/ND packets to the switch, the switch
won't return packets through the current interface. This causes
traffic imbalance. To resolve this issue, when LACP protocol recovers,
send ARP/ND packets if broadcast_neighbor is enabled.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Signed-off-by: Zengbing Tu <tuzengbing@didiglobal.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/3993652dc093fffa9504ce1c2448fb9dea31d2d2.1751031306.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Stacking technology is a type of technology used to expand ports on
Ethernet switches. It is widely used as a common access method in
large-scale Internet data center architectures. Years of practice
have proved that stacking technology has advantages and disadvantages
in high-reliability network architecture scenarios. For instance,
in stacking networking arch, conventional switch system upgrades
require multiple stacked devices to restart at the same time.
Therefore, it is inevitable that the business will be interrupted
for a while. It is for this reason that "no-stacking" in data centers
has become a trend. Additionally, when the stacking link connecting
the switches fails or is abnormal, the stack will split. Although it is
not common, it still happens in actual operation. The problem is that
after the split, it is equivalent to two switches with the same
configuration appearing in the network, causing network configuration
conflicts and ultimately interrupting the services carried by the
stacking system.
To improve network stability, "non-stacking" solutions have been
increasingly adopted, particularly by public cloud providers and
tech companies like Alibaba, Tencent, and Didi. "non-stacking" is
a method of mimicing switch stacking that convinces a LACP peer,
bonding in this case, connected to a set of "non-stacked" switches
that all of its ports are connected to a single switch
(i.e., LACP aggregator), as if those switches were stacked. This
enables the LACP peer's ports to aggregate together, and requires
(a) special switch configuration, described in the linked article,
and (b) modifications to the bonding 802.3ad (LACP) mode to send
all ARP/ND packets across all ports of the active aggregator.
Note that, with multiple aggregators, the current broadcast mode
logic will send only packets to the selected aggregator(s).
+-----------+ +-----------+
| switch1 | | switch2 |
+-----------+ +-----------+
^ ^
| |
+-----------------+
| bond4 lacp |
+-----------------+
| |
| NIC1 | NIC2
+-----------------+
| server |
+-----------------+
- https://www.ruijie.com/fr-fr/support/tech-gallery/de-stack-data-center-network-architecture/
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Signed-off-by: Zengbing Tu <tuzengbing@didiglobal.com>
Link: https://patch.msgid.link/84d0a044514157bb856a10b6d03a1028c4883561.1751031306.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Document rx-no-low-drive and the new support to inject
glitches.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU speculation fixes from Borislav Petkov:
"Add the mitigation logic for Transient Scheduler Attacks (TSA)
TSA are new aspeculative side channel attacks related to the execution
timing of instructions under specific microarchitectural conditions.
In some cases, an attacker may be able to use this timing information
to infer data from other contexts, resulting in information leakage.
Add the usual controls of the mitigation and integrate it into the
existing speculation bugs infrastructure in the kernel"
* tag 'tsa_x86_bugs_for_6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/process: Move the buffer clearing before MONITOR
x86/microcode/AMD: Add TSA microcode SHAs
KVM: SVM: Advertise TSA CPUID bits to guests
x86/bugs: Add a Transient Scheduler Attacks mitigation
x86/bugs: Rename MDS machinery to something more generic
|
|
Introduce a new KVM capability to expose to the userspace whether
cacheable mapping of PFNMAP is supported.
The ability to safely do the cacheable mapping of PFNMAP is contingent
on S2FWB and ARM64_HAS_CACHE_DIC. S2FWB allows KVM to avoid flushing
the D cache, ARM64_HAS_CACHE_DIC allows KVM to avoid flushing the icache
and turns icache_inval_pou() into a NOP. The cap would be false if
those requirements are missing and is checked by making use of
kvm_arch_supports_cacheable_pfnmap.
This capability would allow userspace to discover the support.
It could for instance be used by userspace to prevent live-migration
across FWB and non-FWB hosts.
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Jason Gunthorpe <jgg@nvidia.com>
CC: Oliver Upton <oliver.upton@linux.dev>
CC: David Hildenbrand <david@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-7-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add compatible string nxp,lpc1850-rtc and fallback to nxp,lpc1788-rtc.
Fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: rtc@40046000 (nxp,lpc1850-rtc): compatible: ['nxp,lpc1850-rtc', 'nxp,lpc1788-rtc'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250602142842.942700-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
nxp,lpc3220-rtc have clocks property, so move it from trivial-rtc.yaml.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250624201733.2515971-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The $id path for the sophgo,cv1800b-rtc binding was missing part of the
path 'soc'. However, the correct place for RTC bindings (even if it's
also a "syscon") is the rtc directory, so move the binding there while
fixing the $id value.
Fixes: 76517429dbfd ("dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250608224252.3902421-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This is prepare to hiding snd_soc_dapm_context inside soc-dapm.c
|
|
Introduce a new documentation file, `amd_hfi.rst`, which delves into the
implementation details of the AMD Hardware Feedback Interface and its
associated driver, `amd_hfi`. This documentation describes how the driver
provides hint to the OS scheduling which depends on the capability of core
performance and efficiency ranking data.
This documentation describes:
* The design of the driver
* How the driver provides hints to the OS scheduling
* How the driver interfaces with the kernel for efficiency ranking data.
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/20250609200518.3616080-2-superm1@kernel.org
|
|
Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions.
|
|
This driver has long outlived it's utility, and it's broken and unloved.
The main use case for this was direct mount with UDF of cd-rw drives
that required 32kb packets. It would collect writes into that size and
write them out in multiples of that. That's not a common use case
anymore, the world has moved on from those kinds of media. To make
matters worse, it's actively breaking setups where it's not even
required or useful.
Link: https://lore.kernel.org/linux-block/fxg6dksau4jsk3u5xldlyo2m7qgiux6vtdrz5rywseotsouqdv@urcrwz6qtd3r/
Link: https://lore.kernel.org/linux-block/dcc4836e-6da9-4208-ad27-bbd44b3a2063@kernel.dk/
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge Intel thermal drivers updates for 6.17:
- Add Wildcat Lake PCI ID to the int340x processor_thermal driver
(Srinivas Pandruvada).
- Add debugfs interface to override the temperature set by the firmware
in the platform temperature control (PTC) interface and add a new
sysfs control attribute called thermal_tolerance to it (Srinivas
Pandruvada).
* thermal-intel:
thermal: int340x: processor_thermal: Add Wildcat Lake PCI ID
thermal: intel: int340x: Allow temperature override
thermal: intel: int340x: Add throttling control interface to PTC
|
|
Add the compatible strings for the NXP s32g2 and s32g3. These chips
are mostly compatible. The one difference is that the s32g2-usbmisc
device has an errata ERR050474 which requires a special flag to be set
for handling packages that aren't 4 byte aligned.
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/596d188a-9a2d-41e5-af70-c99bc2b7ca7a@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TCA6418E is a 18-channel I2C I/O expander with integrated ESD
protection.
Signed-off-by: Maria Garcia <mariagarcia7293@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250703205740.45385-2-mariagarcia7293@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add compatible for Mediatek MT7988 SoC with mediatek,mt8183-cci fallback
which is taken by driver.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20250706132213.20412-8-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add an entry for the MT8186 based Squirtle Chromebooks, also known as the
Acer Chromebook Spin 311 (R724T). The device is a 2-in-1 convertible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
