summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2021-10-20dt-bindings: net: dsa: sja1105: add {rx,tx}-internal-delay-psVladimir Oltean2-0/+46
Add a schema validator to nxp,sja1105.yaml and to dsa.yaml for explicit MAC-level RGMII delays. These properties must be per port and must be present only for a phy-mode that represents RGMII. We tell dsa.yaml that these port properties might be present, we also define their valid values for SJA1105. We create a common definition for the RX and TX valid range, since it's quite a mouthful. We also modify the example to include the explicit RGMII delay properties. On the fixed-link ports (in the example, port 4), having these explicit delays is actually mandatory, since with the new behavior, the driver shouts that it is interpreting what delays to apply based on phy-mode. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20dt-bindings: net: dsa: inherit the ethernet-controller DT schemaVladimir Oltean1-0/+3
Since a switch is basically a bunch of Ethernet controllers, just inherit the common schema for one to get stronger type validation of the properties of a port. For example, before this change it was valid to have a phy-mode = "xfi" even if "xfi" is not part of ethernet-controller.yaml, now it is not. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20dt-bindings: net: dsa: sja1105: fix example so all ports have a phy-handle ↵Vladimir Oltean1-0/+1
of fixed-link All ports require either a phy-handle or a fixed-link, and port 3 in the example didn't have one. Add it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-0/+11
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS for net-next: 1) Add new run_estimation toggle to IPVS to stop the estimation_timer logic, from Dust Li. 2) Relax superfluous dynset check on NFT_SET_TIMEOUT. 3) Add egress hook, from Lukas Wunner. 4) Nowadays, almost all hook functions in x_table land just call the hook evaluation loop. Remove remaining hook wrappers from iptables and IPVS. From Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18dt-bindings: net: dsa: realtek-smi: document new compatible rtl8365mbAlvin Šipraga1-0/+87
rtl8365mb is a new realtek-smi subdriver for the RTL8365MB-VC 4+1 port 10/100/1000M Ethernet switch controller. Its compatible string is "realtek,rtl8365mb". Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18dt-bindings: net: ave: Add bindings for NX1 SoCKunihiko Hayashi1-0/+1
Update AVE binding document for UniPhier NX1 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15dt-bindings: net: dsa: qca8k: convert to YAML schemaMatthew Hagan2-245/+362
Convert the qca8k bindings to YAML format. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Co-developed-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15dt-bindings: net: ipq8064-mdio: fix warning with new qca8k switchAnsuel Smith1-1/+4
Fix warning now that we have qca8k switch Documentation using yaml. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15dt-bindings: net: dsa: qca8k: document support for qca8328Ansuel Smith1-3/+4
QCA8328 is the bigger brother of qca8327. Document the new compatible binding and add some information to understand the various switch compatible. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15dt-bindings: net: dsa: qca8k: Document qca,led-open-drain bindingAnsuel Smith1-0/+11
Document new binding qca,ignore-power-on-sel used to ignore power on strapping and use sw regs instead. Document qca,led-open.drain to set led to open drain mode, the qca,ignore-power-on-sel is mandatory with this enabled or an error will be reported. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pllAnsuel Smith1-0/+10
Document qca,sgmii-enable-pll binding used in the CPU nodes to enable SGMII PLL on MAC config. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15dt-bindings: net: dsa: qca8k: Document support for CPU port 6Ansuel Smith1-1/+5
The switch now support CPU port to be set 6 instead of be hardcoded to 0. Document support for it and describe logic selection. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15dt-bindings: net: dsa: qca8k: Add SGMII clock phase propertiesAnsuel Smith1-0/+4
Add names and descriptions of additional PORT0_PAD_CTRL properties. qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock phase to failling edge. Co-developed-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-27/+20
tools/testing/selftests/net/ioam6.sh 7b1700e009cc ("selftests: net: modify IOAM tests for undef bits") bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-15Merge tag 'net-5.15-rc6' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Quite calm. The noisy DSA driver (embedded switches) changes, and adjustment to IPv6 IOAM behavior add to diffstat's bottom line but are not scary. Current release - regressions: - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility - procfs: revert "add seq_puts() statement for dev_mcast", minor format change broke user space Current release - new code bugs: - dsa: fix bridge_num not getting cleared after ports leaving the bridge, resource leak - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0, prevent packet drops if pvid is removed - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW getting confused about station to VLAN mapping Previous releases - regressions: - virtio-net: fix for skb_over_panic inside big mode - phy: do not shutdown PHYs in READY state - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link LED staying lit after ifdown - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL) - mqprio: Correct stats in mqprio_dump_class_stats() - ice: fix deadlock for Tx timestamp tracking flush - stmmac: fix feature detection on old hardware Previous releases - always broken: - sctp: account stream padding length for reconf chunk - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe() - isdn: cpai: check ctr->cnr to avoid array index out of bound - isdn: mISDN: fix sleeping function called from invalid context - nfc: nci: fix potential UAF of rf_conn_info object - dsa: microchip: prevent ksz_mib_read_work from kicking back in after it's canceled in .remove and crashing - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports - dsa: sja1105, ocelot: break circular dependency between switch and tag drivers - dsa: felix: improve timestamping in presence of packe loss - mlxsw: thermal: fix out-of-bounds memory accesses Misc: - ipv6: ioam: move the check for undefined bits to improve interoperability" * tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits) icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe MAINTAINERS: Update the devicetree documentation path of imx fec driver sctp: account stream padding length for reconf chunk mlxsw: thermal: Fix out-of-bounds memory accesses ethernet: s2io: fix setting mac address during resume NFC: digital: fix possible memory leak in digital_in_send_sdd_req() NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() nfc: fix error handling of nfc_proto_register() Revert "net: procfs: add seq_puts() statement for dev_mcast" net: encx24j600: check error in devm_regmap_init_encx24j600 net: korina: select CRC32 net: arc: select CRC32 net: dsa: felix: break at first CPU port during init and teardown net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header net: mscc: ocelot: deny TX timestamping of non-PTP packets net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb ...
2021-10-12Merge branch 'for-5.15-fixes' of ↵Linus Torvalds1-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "All documentation / comment updates" * 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroupv2, docs: fix misinformation in "device controller" section cgroup/cpuset: Change references of cpuset_mutex to cpuset_rwsem docs/cgroup: remove some duplicate words
2021-10-09dt-bindings: net: dsa: document felix family in dsa-tag-protocolVladimir Oltean1-0/+3
The Vitesse/Microsemi/Microchip family of switches supported by the Felix DSA driver is capable of selecting between the native tagging protocol and ocelot-8021q. This is necessary to enable flow control on the CPU port. Certain systems where these switches are integrated use the switch as a port multiplexer, so the termination throughput is paramount. Changing the tagging protocol at runtime is possible for these systems, but since it is known beforehand that one tagging protocol will provide strictly better performance than the other, just allow them to specify the preference in the device tree. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-09dt-bindings: net: dsa: fix typo in dsa-tag-protocol descriptionVladimir Oltean1-1/+1
There is a trivial typo when spelling "protocol", fix it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08Merge tag 'for-linus-5.15b-rc5-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - fix two minor issues in the Xen privcmd driver plus a cleanup patch for that driver - fix multiple issues related to running as PVH guest and some related earlyprintk fixes for other Xen guest types - fix an issue introduced in 5.15 the Xen balloon driver * tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix cancelled balloon action xen/x86: adjust data placement x86/PVH: adjust function/data placement xen/x86: hook up xen_banner() also for PVH xen/x86: generalize preferred console model from PV to PVH Dom0 xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU xen/x86: allow "earlyprintk=xen" to work for PV Dom0 xen/x86: make "earlyprintk=xen" work better for PVH Dom0 xen/x86: allow PVH Dom0 without XEN_PV=y xen/x86: prevent PVH type from getting clobbered xen/privcmd: drop "pages" parameter from xen_remap_pfn() xen/privcmd: fix error handling in mmap-resource processing xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages
2021-10-08Merge tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds3-12/+3
Pull drm fixes from Dave Airlie: "I've returned from my tropical island retreat, even managed to bring one of my kids on a dive with some turtles. Thanks to Daniel for doing last week's work. Otherwise this is the weekly fixes pull, it's a bit bigger because the vc4 reverts in your tree caused some problems with fixes in the drm-misc tree so it got left out last week, so this week has the misc fixes rebased without the vc4 pieces. Otherwise it's i915, amdgpu with the usual fixes and a scattering over other drivers. I expect things should calm down a bit more next week. core: - Kconfig fix for fb_simple vs simpledrm. i915: - Fix RKL HDMI audio - Fix runtime pm imbalance on i915_gem_shrink() error path - Fix Type-C port access before hw/sw state sync - Fix VBT backlight struct version/size check - Fix VT-d async flip on SKL/BXT with plane stretch workaround amdgpu: - DCN 3.1 DP alt mode fixes - S0ix gfxoff fix - Fix DRM_AMD_DC_SI dependencies - PCIe DPC handling fix - DCN 3.1 scaling fix - Documentation fix amdkfd: - Fix potential memory leak - IOMMUv2 init fixes vc4 (there were some hdmi fixes but things got reverted, sort it out later): - compiler fix nouveau: - Cursor fix - Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support. - memory leak fixes rockchip: - crtc/clk fixup panel: - ili9341 Fix DT bindings indent - y030xx067a - yellow tint init seq fix gbefb: - Fix gbefb when built with COMPILE_TEST" * tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits) drm/amd/display: Fix detection of 4 lane for DPALT drm/amd/display: Limit display scaling to up to 4k for DCN 3.1 drm/amd/display: Skip override for preferred link settings during link training drm/nouveau/debugfs: fix file release memory leak drm/nouveau/kms/nv50-: fix file release memory leak drm/nouveau: avoid a use-after-free when BO init fails DRM: delete DRM IRQ legacy midlayer docs video: fbdev: gbefb: Only instantiate device when built for IP32 fbdev: simplefb: fix Kconfig dependencies drm/panel: abt-y030xx067a: yellow tint fix dt-bindings: panel: ili9341: correct indentation drm/nouveau/fifo/ga102: initialise chid on return from channel creation drm/rockchip: Update crtc fixup to account for fractional clk change drm/nouveau/ga102-: support ttm buffer moves via copy engine drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup drm/vc4: hdmi: Remove unused struct drm/kmb: Enable alpha blended second plane drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume drm/amdgpu: init iommu after amdkfd device init ...
2021-10-08dt-bindings: net: snps,dwmac: add dwmac 3.40a IP versionHerve Codina1-0/+2
dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08Merge tag 'amd-drm-fixes-5.15-2021-10-06' of ↵Dave Airlie1-2/+2
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-10-06: amdgpu: - DCN 3.1 DP alt mode fixes - S0ix gfxoff fix - Fix DRM_AMD_DC_SI dependencies - PCIe DPC handling fix - DCN 3.1 scaling fix - Documentation fix amdkfd: - Fix potential memory leak - IOMMUv2 init fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211006203828.4818-1-alexander.deucher@amd.com
2021-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski12-34/+49
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ipvs: add sysctl_run_estimation to support disable estimationDust Li1-0/+11
estimation_timer will iterate the est_list to do estimation for each ipvs stats. When there are lots of services, the list can be very large. We found that estimation_timer() run for more then 200ms on a machine with 104 CPU and 50K services. yunhong-cgl jiang report the same phenomenon before: https://www.spinics.net/lists/lvs-devel/msg05426.html In some cases(for example a large K8S cluster with many ipvs services), ipvs estimation may not be needed. So adding a sysctl blob to allow users to disable this completely. Default is: 1 (enable) Cc: yunhong-cgl jiang <xintian1976@gmail.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-10-07Merge tag 'net-5.15-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from xfrm, bpf, netfilter, and wireless. Current release - regressions: - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new value in the middle of an enum - unix: fix an issue in unix_shutdown causing the other end read/write failures - phy: mdio: fix memory leak Current release - new code bugs: - mlx5e: improve MQPRIO resiliency against bad configs Previous releases - regressions: - bpf: fix integer overflow leading to OOB access in map element pre-allocation - stmmac: dwmac-rk: fix ethernet on rk3399 based devices - netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 - brcmfmac: revert using ISO3166 country code and 0 rev as fallback - i40e: fix freeing of uninitialized misc IRQ vector - iavf: fix double unlock of crit_lock Previous releases - always broken: - bpf, arm: fix register clobbering in div/mod implementation - netfilter: nf_tables: correct issues in netlink rule change event notifications - dsa: tag_dsa: fix mask for trunked packets - usb: r8152: don't resubmit rx immediately to avoid soft lockup on device unplug - i40e: fix endless loop under rtnl if FW fails to correctly respond to capability query - mlx5e: fix rx checksum offload coexistence with ipsec offload - mlx5: force round second at 1PPS out start time and allow it only in supported clock modes - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable sequence Misc: - xfrm: slightly rejig the new policy uAPI to make it less cryptic" * tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) net: prefer socket bound to interface when not in VRF iavf: fix double unlock of crit_lock i40e: Fix freeing of uninitialized misc IRQ vector i40e: fix endless loop under rtnl dt-bindings: net: dsa: marvell: fix compatible in example ionic: move filter sync_needed bit set gve: report 64bit tx_bytes counter from gve_handle_report_stats() gve: fix gve_get_stats() rtnetlink: fix if_nlmsg_stats_size() under estimation gve: Properly handle errors in gve_assign_qpl gve: Avoid freeing NULL pointer gve: Correct available tx qpl check unix: Fix an issue in unix_shutdown causing the other end read/write failures net: stmmac: trigger PCS EEE to turn off on link down net: pcs: xpcs: fix incorrect steps on disable EEE netlink: annotate data races around nlk->bound net: pcs: xpcs: fix incorrect CL37 AN sequence net: sfp: Fix typo in state machine debug string net/sched: sch_taprio: properly cancel timer from taprio_destroy() net: bridge: fix under estimation in br_get_linkxstats_size() ...
2021-10-07Merge tag 'devicetree-fixes-for-5.15-3' of ↵Linus Torvalds9-12/+6
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add another allowed address for TI sn65dsi86 - Drop more redundant minItems/maxItems - Fix more graph 'unevaluatedProperties' warnings in media bindings * tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value dt-bindings: Drop more redundant 'maxItems/minItems' dt-bindings: media: Fix more graph 'unevaluatedProperties' related warnings
2021-10-07ethtool: Add transceiver module extended stateIdo Schimmel1-0/+10
Add an extended state and sub-state to describe link issues related to transceiver modules. The 'ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY' extended sub-state tells user space that port is unable to gain a carrier because the CMIS Module State Machine did not reach the ModuleReady (Fully Operational) state. For example, if the module is stuck at ModuleLowPwr or ModuleFault state. In case of the latter, user space can read the fault reason from the module's EEPROM and potentially reset it. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethtool: Add ability to control transceiver modules' power modeIdo Schimmel1-2/+69
Add a pair of new ethtool messages, 'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that can be used to control transceiver modules parameters and retrieve their status. The first parameter to control is the power mode of the module. It is only relevant for paged memory modules, as flat memory modules always operate in low power mode. When a paged memory module is in low power mode, its power consumption is reduced to the minimum, the management interface towards the host is available and the data path is deactivated. User space can choose to put modules that are not currently in use in low power mode and transition them to high power mode before putting the associated ports administratively up. This is useful for user space that favors reduced power consumption and lower temperatures over reduced link up times. In QSFP-DD modules the transition from low power mode to high power mode can take a few seconds and this transition is only expected to get longer with future / more complex modules. User space can control the power mode of the module via the power mode policy attribute ('ETHTOOL_A_MODULE_POWER_MODE_POLICY'). Possible values: * high: Module is always in high power mode. * auto: Module is transitioned by the host to high power mode when the first port using it is put administratively up and to low power mode when the last port using it is put administratively down. The operational power mode of the module is available to user space via the 'ETHTOOL_A_MODULE_POWER_MODE' attribute. The attribute is not reported to user space when a module is not plugged-in. The user API is designed to be generic enough so that it could be used for modules with different memory maps (e.g., SFF-8636, CMIS). The only implementation of the device driver API in this series is for a MAC driver (mlxsw) where the module is controlled by the device's firmware, but it is designed to be generic enough so that it could also be used by implementations where the module is controlled by the CPU. CMIS testing ============ # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off The module is not in low power mode, as it is not forced by hardware (LowPwrAllowRequestHW is off) or by software (LowPwrRequestSW is off). The power mode can be queried from the kernel. In case LowPwrAllowRequestHW was on, the kernel would need to take into account the state of the LowPwrRequestHW signal, which is not visible to user space. $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp11 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp11 up Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp11 down Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On SFF-8636 testing ================ # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7733 mW / -1.12 dBm Transmit avg optical power (Channel 2) : 0.7649 mW / -1.16 dBm Transmit avg optical power (Channel 3) : 0.7790 mW / -1.08 dBm Transmit avg optical power (Channel 4) : 0.7837 mW / -1.06 dBm Rcvr signal avg optical power(Channel 1) : 0.9302 mW / -0.31 dBm Rcvr signal avg optical power(Channel 2) : 0.9079 mW / -0.42 dBm Rcvr signal avg optical power(Channel 3) : 0.8993 mW / -0.46 dBm Rcvr signal avg optical power(Channel 4) : 0.8778 mW / -0.57 dBm The module is not in low power mode, as it is not forced by hardware (Power override is on) or by software (Power set is off). The power mode can be queried from the kernel. In case Power override was off, the kernel would need to take into account the state of the LPMode signal, which is not visible to user space. $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp13 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp13 up Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7934 mW / -1.01 dBm Transmit avg optical power (Channel 2) : 0.7859 mW / -1.05 dBm Transmit avg optical power (Channel 3) : 0.7885 mW / -1.03 dBm Transmit avg optical power (Channel 4) : 0.7985 mW / -0.98 dBm Rcvr signal avg optical power(Channel 1) : 0.9325 mW / -0.30 dBm Rcvr signal avg optical power(Channel 2) : 0.9034 mW / -0.44 dBm Rcvr signal avg optical power(Channel 3) : 0.9086 mW / -0.42 dBm Rcvr signal avg optical power(Channel 4) : 0.8885 mW / -0.51 dBm Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp13 down Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-06dt-bindings: net: dsa: marvell: fix compatible in exampleMarcel Ziswiler1-1/+1
While the MV88E6390 switch chip exists, one is supposed to use a compatible of "marvell,mv88e6190" for it. Fix this in the given example. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06DRM: delete DRM IRQ legacy midlayer docsRandy Dunlap1-9/+0
Remove documentation associated with the removal of the DRM IRQ legacy midlayer. Eliminates these documentation warnings: ../drivers/gpu/drm/drm_irq.c:1: warning: 'irq helpers' not found ../drivers/gpu/drm/drm_irq.c:1: warning: no structured comments found Fixes: c1736b9008cb ("drm: IRQ midlayer is now legacy") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211005025312.20913-1-rdunlap@infradead.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06dt-bindings: panel: ili9341: correct indentationKrzysztof Kozlowski1-1/+1
Correct indentation warning: ilitek,ili9341.yaml:25:9: [warning] wrong indentation: expected 10 but found 8 (indentation) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210819101020.26368-1-krzysztof.kozlowski@canonical.com (cherry picked from commit 333ba0d9d5d5a2cf1f6bbb754045e4f2cb3ed22d) Link: https://lore.kernel.org/dri-devel/CAL_JsqKcTfgnXNYzGDSFhKS2udhw2Dvk04ODwTxUdDRQjKdT0Q@mail.gmail.com/ Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-05Documentation/gpu: remove spurious "+" in amdgpu.rstAlex Deucher1-2/+2
Not sure why that was there. Remove it. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05xen/x86: make "earlyprintk=xen" work for HVM/PVH DomUJan Beulich1-1/+1
xenboot_write_console() is dealing with these quite fine so I don't see why xenboot_console_setup() would return -ENOENT in this case. Adjust documentation accordingly. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/3d212583-700e-8b2d-727a-845ef33ac265@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-10-04dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg valueGeert Uytterhoeven1-1/+1
make dtbs_check: arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge@2c: reg:0:0: 45 was expected According to the datasheet, the I2C address can be either 0x2c or 0x2d, depending on the ADDR control input. Fixes: e3896e6dddf0b821 ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/08f73c2aa0d4e580303357dfae107d084d962835.1632486753.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-03Merge tag 'char-misc-5.15-rc4' of ↵Linus Torvalds1-4/+42
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.15-rc4. They are in two "groups": - ipack driver fixes for issues found by Johan Hovold - interconnect driver fixes for reported problems All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ipack: ipoctal: fix module reference leak ipack: ipoctal: fix missing allocation-failure check ipack: ipoctal: fix tty-registration error handling ipack: ipoctal: fix tty registration race ipack: ipoctal: fix stack information leak interconnect: qcom: sdm660: Add missing a2noc qos clocks dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg
2021-10-03Merge tag 'hwmon-for-v5.15-rc4' of ↵Linus Torvalds1-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fixed various potential NULL pointer accesses in w8379* drivers - Improved error handling, fault reporting, and fixed rounding in thmp421 driver - Fixed error handling in ltc2947 driver - Added missing attribute to pmbus/mp2975 driver - Fixed attribute values in pbus/ibm-cffps, occ, and mlxreg-fan drivers - Removed unused residual code from k10temp driver * tag 'hwmon-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controller hwmon: (pmbus/ibm-cffps) max_power_out swap changes hwmon: (occ) Fix P10 VRM temp sensors hwmon: (ltc2947) Properly handle errors when looking for the external clock hwmon: (tmp421) fix rounding for negative values hwmon: (tmp421) report /PVLD condition as fault hwmon: (tmp421) handle I2C errors hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs hwmon: (k10temp) Remove residues of current and voltage
2021-10-02net: wwan: iosm: correct devlink extra paramsM Chetan Kumar1-26/+6
1. Removed driver specific extra params like download_region, address & region_count. The required information is passed as part of flash API. 2. IOSM Devlink documentation updated to reflect the same. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02dt-bindings: net: renesas,etheravb: Update example to match realityGeert Uytterhoeven1-0/+3
- Add missing clock-names property, - Add example compatible values for PHY subnode. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02dt-bindings: net: renesas,ether: Update example to match realityGeert Uytterhoeven1-5/+12
- Drop unneeded interrupt-parent, - Convert to new style CPG/MSSR bindings, - Add missing power-domains and resets properties, - Update PHY subnode: - Add example compatible values, - Add micrel,led-mode and reset-gpios examples. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski2-0/+101
Daniel Borkmann says: ==================== bpf-next 2021-10-02 We've added 85 non-merge commits during the last 15 day(s) which contain a total of 132 files changed, 13779 insertions(+), 6724 deletions(-). The main changes are: 1) Massive update on test_bpf.ko coverage for JITs as preparatory work for an upcoming MIPS eBPF JIT, from Johan Almbladh. 2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool, with driver support for i40e and ice from Magnus Karlsson. 3) Add legacy uprobe support to libbpf to complement recently merged legacy kprobe support, from Andrii Nakryiko. 4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky. 5) Support saving the register state in verifier when spilling <8byte bounded scalar to the stack, from Martin Lau. 6) Add libbpf opt-in for stricter BPF program section name handling as part of libbpf 1.0 effort, from Andrii Nakryiko. 7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov. 8) Fix skel_internal.h to propagate errno if the loader indicates an internal error, from Kumar Kartikeya Dwivedi. 9) Fix build warnings with -Wcast-function-type so that the option can later be enabled by default for the kernel, from Kees Cook. 10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it otherwise errors out when encountering them, from Toke Høiland-Jørgensen. 11) Teach libbpf to recognize specialized maps (such as for perf RB) and internally remove BTF type IDs when creating them, from Hengqi Chen. 12) Various fixes and improvements to BPF selftests. ==================== Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-02dt-bindings: Drop more redundant 'maxItems/minItems'Rob Herring4-7/+1
Another round of removing redundant minItems/maxItems from new schema in the recent merge window. If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Marek Vasut <marex@denx.de> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: dri-devel@lists.freedesktop.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210928222920.2204761-1-robh@kernel.org
2021-10-02dt-bindings: media: Fix more graph 'unevaluatedProperties' related warningsRob Herring4-4/+4
The graph schema doesn't allow custom properties on endpoint nodes for '#/properties/port' and '#/$defs/port-base' should be used instead. This doesn't matter until 'unevaluatedProperties' support is implemented. Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "Paul J. Murphy" <paul.j.murphy@intel.com> Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Cc: linux-media@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Link: https://lore.kernel.org/r/20210820001457.1705142-1-robh@kernel.org
2021-10-01devlink: report maximum number of snapshots with regionsJacob Keller2-2/+6
Each region has an independently configurable number of maximum snapshots. This information is not reported to userspace, making it not very discoverable. Fix this by adding a new DEVLINK_ATTR_REGION_MAX_SNAPSHOST attribute which is used to report this maximum. Ex: $devlink region pci/0000:af:00.0/nvm-flash: size 10485760 snapshot [] max 1 pci/0000:af:00.0/device-caps: size 4096 snapshot [] max 10 pci/0000:af:00.1/nvm-flash: size 10485760 snapshot [] max 1 pci/0000:af:00.1/device-caps: size 4096 snapshot [] max 10 This information enables users to understand why a new region command may fail due to having too many existing snapshots. Reported-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+3
drivers/net/phy/bcm7xxx.c d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations") f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") net/sched/sch_api.c b193e15ac69d ("net: prevent user from passing illegal stab size") 69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers") Both cases trivial - adjacent code additions. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-29doc/mctp: Add a little detail about kernel internalsJeremy Kerr1-0/+59
Describe common flows and refcounting behaviour. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27Merge tag 'icc-5.15-rc3' of ↵Greg Kroah-Hartman1-4/+42
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v5.15 This contains a few fixes for the sdm660 driver: - sdm660: Fix id of slv_cnoc_mnoc_cfg - sdm660: Correct NOC_QOS_PRIORITY shift and mask - sdm660: Add missing a2noc qos clocks Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sdm660: Add missing a2noc qos clocks dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg
2021-09-26Merge tag 'irq-urgent-2021-09-26' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Work around a bad GIC integration on a Renesas platform which can't handle byte-sized MMIO access - Plug a potential memory leak in the GICv4 driver - Fix a regression in the Armada 370-XP IPI code which was caused by issuing EOI instack of ACK. - A couple of small fixes here and there" * tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Work around broken Renesas integration irqchip/renesas-rza1: Use semicolons instead of commas irqchip/gic-v3-its: Fix potential VPE leak on error irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build irqchip/mbigen: Repair non-kernel-doc notation irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent irqchip/armada-370-xp: Fix ack/eoi breakage Documentation: Fix irq-domain.rst build warning
2021-09-24Merge tag 'irqchip-fixes-5.15-1' of ↵Thomas Gleixner1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Work around a bad GIC integration on a Renesas platform, where the interconnect cannot deal with byte-sized MMIO accesses - Cleanup another Renesas driver abusing the comma operator - Fix a potential GICv4 memory leak on an error path - Make the type of 'size' consistent with the rest of the code in __irq_domain_add() - Fix a regression in the Armada 370-XP IPI path - Fix the build for the obviously unloved goldfish-pic - Some documentation fixes Link: https://lore.kernel.org/r/20210924090933.2766857-1-maz@kernel.org
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-4/+93
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-23Merge tag 'net-5.15-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports() Previous releases - regressions: - introduce a shutdown method to mdio device drivers, and make DSA switch drivers compatible with masters disappearing on shutdown; preventing infinite reference wait - fix issues in mdiobus users related to ->shutdown vs ->remove - virtio-net: fix pages leaking when building skb in big mode - xen-netback: correct success/error reporting for the SKB-with-fraglist - dsa: tear down devlink port regions when tearing down the devlink port on error - nexthop: fix division by zero while replacing a resilient group - hns3: check queue, vf, vlan ids range before using Previous releases - always broken: - napi: fix race against netpoll causing NAPI getting stuck - mlx4_en: ensure link operstate is updated even if link comes up before netdev registration - bnxt_en: fix TX timeout when TX ring size is set to the smallest - enetc: fix illegal access when reading affinity_hint; prevent oops on sysfs access - mtk_eth_soc: avoid creating duplicate offload entries Misc: - core: correct the sock::sk_lock.owned lockdep annotations" * tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) atlantic: Fix issue in the pm resume flow. net/mlx4_en: Don't allow aRFS for encapsulated packets net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries nfc: st-nci: Add SPI ID matching DT compatible MAINTAINERS: remove Guvenc Gulce as net/smc maintainer nexthop: Fix memory leaks in nexthop notification chain listeners mptcp: ensure tx skbs always have the MPTCP ext qed: rdma - don't wait for resources under hw error recovery flow s390/qeth: fix deadlock during failing recovery s390/qeth: Fix deadlock in remove_discipline s390/qeth: fix NULL deref in qeth_clear_working_pool_list() net: dsa: realtek: register the MDIO bus under devres net: dsa: don't allocate the slave_mii_bus using devres Doc: networking: Fox a typo in ice.rst net: dsa: fix dsa_tree_setup error path net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work net/smc: add missing error check in smc_clc_prfx_set() net: hns3: fix a return value error in hclge_get_reset_status() net: hns3: check vlan id before using it ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-12 00:56:11 +0300