summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2026-04-11dt-bindings: gpio: fix microchip #interrupt-cellsJamie Gibbons1-2/+2
[ Upstream commit 6b5ef8c88854b343b733b574ea8754c9dab61f41 ] The GPIO controller on PolarFire SoC supports more than one type of interrupt and needs two interrupt cells. Fixes: 735806d8a68e9 ("dt-bindings: gpio: add bindings for microchip mpfs gpio") Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20260326-wise-gumdrop-49217723a72a@spud Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-11dt-bindings: auxdisplay: ht16k33: Use unevaluatedProperties to fix common ↵Frank Li1-1/+1
property warning [ Upstream commit 398c0c8bbc8f5a9d2f43863275a427a9d3720b6f ] Change additionalProperties to unevaluatedProperties because it refs to /schemas/input/matrix-keymap.yaml. Fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dtb: keypad@70 (holtek,ht16k33): 'keypad,num-columns', 'keypad,num-rows' do not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml# Fixes: f12b457c6b25c ("dt-bindings: auxdisplay: ht16k33: Convert to json-schema") Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-11hwmon: (peci/cputemp) Fix crit_hyst returning delta instead of absolute ↵Sanman Pradhan1-4/+6
temperature commit 0adc752b4f7d82af7bd14f7cad3091b3b5d702ba upstream. The hwmon sysfs ABI expects tempN_crit_hyst to report the temperature at which the critical condition clears, not the hysteresis delta from the critical limit. The peci cputemp driver currently returns tjmax - tcontrol for crit_hyst_type, which is the hysteresis margin rather than the corresponding absolute temperature. Return tcontrol directly, and update the documentation accordingly. Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan <psanman@juniper.net> Link: https://lore.kernel.org/r/20260323002352.93417-2-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-11hwmon: (adm1177) fix sysfs ABI violation and current unit conversionSanman Pradhan1-4/+4
[ Upstream commit bf08749a6abb6d1959bfdc0edc32c640df407558 ] The adm1177 driver exposes the current alert threshold through hwmon_curr_max_alarm. This violates the hwmon sysfs ABI, where *_alarm attributes are read-only status flags and writable thresholds must use currN_max. The driver also stores the threshold internally in microamps, while currN_max is defined in milliamps. Convert the threshold accordingly on both the read and write paths. Widen the cached threshold and related calculations to 64 bits so that small shunt resistor values do not cause truncation or overflow. Also use 64-bit arithmetic for the mA/uA conversions, clamp writes to the range the hardware can represent, and propagate failures from adm1177_write_alert_thr() instead of silently ignoring them. Update the hwmon documentation to reflect the attribute rename and the correct units returned by the driver. Fixes: 09b08ac9e8d5 ("hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver") Signed-off-by: Sanman Pradhan <psanman@juniper.net> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20260325051246.28262-1-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-11usb: core: new quirk to handle devices with zero configurationsJie Deng1-0/+3
[ Upstream commit 9f6a983cfa22ac662c86e60816d3a357d4b551e9 ] Some USB devices incorrectly report bNumConfigurations as 0 in their device descriptor, which causes the USB core to reject them during enumeration. logs: usb 1-2: device descriptor read/64, error -71 usb 1-2: no configurations usb 1-2: can't read configurations, error -22 However, these devices actually work correctly when treated as having a single configuration. Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices. When this quirk is set, assume the device has 1 configuration instead of failing with -EINVAL. This quirk is applied to the device with VID:PID 5131:2007 which exhibits this behavior. Signed-off-by: Jie Deng <dengjie03@kylinos.cn> Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-25net: dpaa2: replace dpaa2_mac_is_type_fixed() with dpaa2_mac_is_type_phy()Vladimir Oltean1-3/+6
[ Upstream commit 320fefa9e2edc67011e235ea1d50f0d00ddfe004 ] dpaa2_mac_is_type_fixed() is a header with no implementation and no callers, which is referenced from the documentation though. It can be deleted. On the other hand, it would be useful to reuse the code between dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common code should be called dpaa2_mac_is_type_phy(), so let's create that. The removal and the addition are merged into the same patch because, in fact, is_type_phy() is the logical opposite of is_type_fixed(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 74badb9c20b1 ("dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04Documentation: PCI: endpoint: Fix ntb/vntb copy & paste errorsBaruch Siach1-7/+7
[ Upstream commit ad0c6da5be901f5c181490f683d22b416059bccb ] Fix copy & paste errors by changing the references from 'ntb' to 'vntb'. Fixes: 4ac8c8e52cd9 ("Documentation: PCI: Add specification for the PCI vNTB function device") Signed-off-by: Baruch Siach <baruch@tkos.co.il> [mani: squashed the patches and fixed more errors] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/b51c2a69ffdbfa2c359f5cf33f3ad2acc3db87e4.1762154911.git.baruch@tkos.co.il Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-19PCI: endpoint: Automatically create a function specific attributes groupDamien Le Moal2-15/+9
[ Upstream commit 70b3740f2c1941e2006d61539131b70d20cba9a6 ] A PCI endpoint function driver can define function specific attributes under its function configfs directory using the add_cfs() endpoint driver operation. This is done by tying up the mkdir operation for the function configfs directory to a call to the add_cfs() operation. However, there are no checks preventing the user from repeatedly creating function specific attribute directories with different names, resulting in the same endpoint specific attributes group being added multiple times, which also result in an invalid reference counting for the attribute groups. E.g., using the pci-epf-ntb function driver as an example, the user creates the function as follows: $ modprobe pci-epf-ntb $ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb $ mkdir func0 $ tree func0 func0/ |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid $ mkdir func0/attrs $ tree func0 func0/ |-- attrs | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid At this point, the function can be started by linking the EP controller. However, if the user mistakenly creates again a directory: $ mkdir func0/attrs2 $ tree func0 func0/ |-- attrs | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- attrs2 | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid The endpoint function specific attributes are duplicated and cause a crash when the endpoint function device is torn down: refcount_t: addition on 0; use-after-free. WARNING: CPU: 2 PID: 834 at lib/refcount.c:25 refcount_warn_saturate+0xc8/0x144 CPU: 2 PID: 834 Comm: rmdir Not tainted 6.3.0-rc1 #1 Hardware name: Pine64 RockPro64 v2.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) ... Call trace: refcount_warn_saturate+0xc8/0x144 config_item_get+0x7c/0x80 configfs_rmdir+0x17c/0x30c vfs_rmdir+0x8c/0x204 do_rmdir+0x158/0x184 __arm64_sys_unlinkat+0x64/0x80 invoke_syscall+0x48/0x114 ... Fix this by modifying pci_epf_cfs_work() to execute the new function pci_ep_cfs_add_type_group() which itself calls pci_epf_type_add_cfs() to obtain the function specific attribute group and the group name (directory name) from the endpoint function driver. If the function driver defines an attribute group, pci_ep_cfs_add_type_group() then proceeds to register this group using configfs_register_group(), thus automatically exposing the function type specific configfs attributes to the user. E.g.: $ modprobe pci-epf-ntb $ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb $ mkdir func0 $ tree func0 func0/ |-- baseclass_code |-- cache_line_size |-- ... |-- pci_epf_ntb.0 | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- primary |-- ... `-- vendorid With this change, there is no need for the user to create or delete directories in the endpoint function attributes directory. The pci_epf_type_group_ops group operations are thus removed. Also update the documentation for the pci-epf-ntb and pci-epf-vntb function drivers to reflect this change, removing the explanations showing the need to manually create the sub-directory for the function specific attributes. Link: https://lore.kernel.org/r/20230415023542.77601-2-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Stable-dep-of: 7c5c7d06bd1f ("PCI: endpoint: Avoid creating sub-groups asynchronously") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06fou: Don't allow 0 for FOU_ATTR_IPPROTO.Kuniyuki Iwashima1-0/+2
[ Upstream commit 7a9bc9e3f42391e4c187e099263cf7a1c4b69ff5 ] fou_udp_recv() has the same problem mentioned in the previous patch. If FOU_ATTR_IPPROTO is set to 0, skb is not freed by fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu(). Let's forbid 0 for FOU_ATTR_IPPROTO. Fixes: 23461551c0062 ("fou: Support for foo-over-udp RX path") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260115172533.693652-4-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06netlink: add a proto specification for FOUJakub Kicinski1-0/+128
[ Upstream commit 4eb77b4ecd3c5eaab83adf76e67e0a7ed2a24418 ] FOU has a reasonably modern Genetlink family. Add a spec. Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06ata: libata: cleanup fua support detectionDamien Le Moal1-0/+3
[ Upstream commit 4d2e4980a5289ae31a1cff40d258b68573182a37 ] Move the detection of a device FUA support from ata_scsiop_mode_sense()/ata_dev_supports_fua() to device scan time in ata_dev_configure(). The function ata_dev_config_fua() is introduced to detect if a device supports FUA and this support is indicated using the new device flag ATA_DFLAG_FUA. In order to blacklist known buggy devices, the horkage flag ATA_HORKAGE_NO_FUA is introduced. Similarly to other horkage flags, the libata.force= arguments "fua" and "nofua" are also introduced to allow a user to control this horkage flag through the "force" libata module parameter. The ATA_DFLAG_FUA device flag is set only and only if all the following conditions are met: * libata.fua module parameter is set to 1 * The device supports the WRITE DMA FUA EXT command, * The device is not marked with the ATA_HORKAGE_NO_FUA flag, either from the blacklist or set by the user with libata.force=nofua * The device supports NCQ (while this is not mandated by the standards, this restriction is introduced to avoid problems with older non-NCQ devices). Enabling or diabling libata FUA support for all devices can now also be done using the "force=[no]fua" module parameter when libata.fua is set to 1. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Stable-dep-of: c8c6fb886f57 ("ata: libata: Print features also for ATAPI devices") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11tty: fix tty_port_tty_*hangup() kernel-docJiri Slaby (SUSE)1-2/+3
commit 6241b49540a65a6d5274fa938fd3eb4cbfe2e076 upstream. The commit below added a new helper, but omitted to move (and add) the corressponding kernel-doc. Do it now. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Fixes: 2b5eac0f8c6e ("tty: introduce and use tty_port_tty_vhangup() helper") Link: https://lore.kernel.org/all/b23d566c-09dc-7374-cc87-0ad4660e8b2e@linux.intel.com/ Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/20250624080641.509959-6-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-11fs_context: drop the unused lsm_flags memberOndrej Mosnacek1-1/+0
[ Upstream commit 4e04143c869c5b6d499fbd5083caa860d5c942c3 ] This isn't ever used by VFS now, and it couldn't even work. Any FS that uses the SECURITY_LSM_NATIVE_LABELS flag needs to also process the value returned back from the LSM, so it needs to do its security_sb_set_mnt_opts() call on its own anyway. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Stable-dep-of: 8675c69816e4 ("NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11dt-bindings: PCI: amlogic: Fix the register name of the DBI regionManivannan Sadhasivam1-3/+3
[ Upstream commit 4813dea9e272ba0a57c50b8d51d440dd8e3ccdd7 ] Binding incorrectly specifies the 'DBI' region as 'ELBI'. DBI is a must have region for DWC controllers as it has the Root Port and controller specific registers, while ELBI has optional registers. Hence, fix the binding. Though this is an ABI break, this change is needed to accurately describe the PCI memory map. Fixes: 7cd210391101 ("dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-1-c50dcc56ed6a@oss.qualcomm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schemaNeil Armstrong2-70/+134
[ Upstream commit b80b848bdf56bd402b7a91aea5b77cec93dfe4c2 ] Convert the Amlogic Meson AXG DWC PCIe SoC controller bindings to dt-schema. Link: https://lore.kernel.org/r/20221117-b4-amlogic-bindings-convert-v4-5-34e623dbf789@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Stable-dep-of: 4813dea9e272 ("dt-bindings: PCI: amlogic: Fix the register name of the DBI region") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11Documentation: process: Also mention Sasha Levin as stable tree maintainerBagas Sanjaya1-2/+4
commit ba2457109d5b47a90fe565b39524f7225fc23e60 upstream. Sasha has also maintaining stable branch in conjunction with Greg since cb5d21946d2a2f ("MAINTAINERS: Add Sasha as a stable branch maintainer"). Mention him in 2.Process.rst. Cc: stable@vger.kernel.org Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20251022034336.22839-1-bagasdotme@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groupsKrzysztof Kozlowski1-12/+14
[ Upstream commit 316e361b5d2cdeb8d778983794a1c6eadcb26814 ] The "groups" property can hold multiple entries (e.g. toshiba/tmpv7708-rm-mbrc.dts file), so allow that by dropping incorrect type (pinmux-node.yaml schema already defines that as string-array) and adding constraints for items. This fixes dtbs_check warnings like: toshiba/tmpv7708-rm-mbrc.dtb: pinctrl@24190000 (toshiba,tmpv7708-pinctrl): pwm-pins:groups: ['pwm0_gpio16_grp', 'pwm1_gpio17_grp', 'pwm2_gpio18_grp', 'pwm3_gpio19_grp'] is too long Fixes: 1825c1fe0057 ("pinctrl: Add DT bindings for Toshiba Visconti TMPV7700 SoC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [ adjusted $ref context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07xhci: dbc: Allow users to modify DbC poll interval via sysfsUday M Bhat1-0/+10
[ Upstream commit de3edd47a18fe05a560847cc3165871474e08196 ] xhci DbC driver polls the host controller for DbC events at a reduced rate when DbC is enabled but there are no active data transfers. Allow users to modify this reduced poll interval via dbc_poll_interval_ms sysfs entry. Unit is milliseconds and accepted range is 0 to 5000. Max interval of 5000 ms is selected as it matches the common 5 second timeout used in usb stack. Default value is 64 milliseconds. A long interval is useful when users know there won't be any activity on systems connected via DbC for long periods, and want to avoid battery drainage due to unnecessary CPU usage. Example being Android Debugger (ADB) usage over DbC on ChromeOS systems running Android Runtime. [minor changes and rewording -Mathias] Co-developed-by: Samuel Jacob <samjaco@google.com> Signed-off-by: Samuel Jacob <samjaco@google.com> Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240626124835.1023046-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: f3d12ec847b9 ("xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07xhci: dbc: Provide sysfs option to configure dbc descriptorsMathias Nyman1-0/+52
[ Upstream commit edf1664f3249a091a2b91182fc087b3253b0b4c2 ] When DbC is enabled the first port on the xHC host acts as a usb device. xHC provides the descriptors automatically when the DbC device is enumerated. Most of the values are hardcoded, but some fields such as idProduct, idVendor, bcdDevice and bInterfaceProtocol can be modified. Add sysfs entries that allow userspace to change these. User can only change them before dbc is enabled, i.e. before writing "enable" to dbc sysfs file as we don't want these values to change while device is connected, or during enumeration. Add documentation for these entries in Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: f3d12ec847b9 ("xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mpXu Yang1-1/+9
[ Upstream commit 268eb6fb908bc82ce479e4dba9a2cad11f536c9c ] Only i.MX8MP need dma-range property to let USB controller work properly. Remove dma-range from required list and add limitation for imx8mp. Fixes: d2a704e29711 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings") Cc: stable <stable@kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-29arm64: errata: Apply workarounds for Neoverse-V3AEMark Rutland1-0/+2
commit 0c33aa1804d101c11ba1992504f17a42233f0e11 upstream. Neoverse-V3AE is also affected by erratum #3312417, as described in its Software Developer Errata Notice (SDEN) document: Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417 https://developer.arm.com/documentation/SDEN-2615521/9-0/ Enable the workaround for Neoverse-V3AE, and document this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Will Deacon <will@kernel.org> [ Ryan: Trivial backport ] Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-29doc: fix seg6_flowlabel pathNicolas Dichtel1-0/+3
[ Upstream commit 0b4b77eff5f8cd9be062783a1c1e198d46d0a753 ] This sysctl is not per interface; it's global per netns. Fixes: 292ecd9f5a94 ("doc: move seg6_flowlabel to seg6-sysctl.rst") Reported-by: Philippe Guibert <philippe.guibert@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-29timers: Update the documentation to reflect on the new timer_shutdown() APISteven Rostedt (Google)4-3/+8
[ Upstream commit a31323bef2b66455920d054b160c17d4240f8fd4 ] In order to make sure that a timer is not re-armed after it is stopped before freeing, a new shutdown state is added to the timer code. The API timer_shutdown_sync() and timer_shutdown() must be called before the object that holds the timer can be freed. Update the documentation to reflect this new workflow. [ tglx: Updated to the new semantics and updated the zh_CN version ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/r/20221110064147.712934793@goodmis.org Link: https://lore.kernel.org/r/20221123201625.375284489@linutronix.de Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-29Documentation: Replace del_timer/del_timer_sync()Thomas Gleixner6-15/+14
[ Upstream commit 87bdd932e85881895d4720255b40ac28749c4e32 ] Adjust to the new preferred function names. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/r/20221123201625.075320635@linutronix.de Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-29Documentation: Remove bogus claim about del_timer_sync()Thomas Gleixner2-5/+2
[ Upstream commit b0b0aa5d858d4d2fe39a5e4486e0550e858108f6 ] del_timer_sync() does not return the number of times it tried to delete the timer which rearms itself. It's clearly documented: The function returns whether it has deactivated a pending timer or not. This part of the documentation is from 2003 where del_timer_sync() really returned the number of deletion attempts for unknown reasons. The code was rewritten in 2005, but the documentation was not updated. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/r/20221123201624.452282769@linutronix.de Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19fs: Add 'initramfs_options' to set initramfs mount optionsLichen Liu1-0/+3
[ Upstream commit 278033a225e13ec21900f0a92b8351658f5377f2 ] When CONFIG_TMPFS is enabled, the initial root filesystem is a tmpfs. By default, a tmpfs mount is limited to using 50% of the available RAM for its content. This can be problematic in memory-constrained environments, particularly during a kdump capture. In a kdump scenario, the capture kernel boots with a limited amount of memory specified by the 'crashkernel' parameter. If the initramfs is large, it may fail to unpack into the tmpfs rootfs due to insufficient space. This is because to get X MB of usable space in tmpfs, 2*X MB of memory must be available for the mount. This leads to an OOM failure during the early boot process, preventing a successful crash dump. This patch introduces a new kernel command-line parameter, initramfs_options, which allows passing specific mount options directly to the rootfs when it is first mounted. This gives users control over the rootfs behavior. For example, a user can now specify initramfs_options=size=75% to allow the tmpfs to use up to 75% of the available memory. This can significantly reduce the memory pressure for kdump. Consider a practical example: To unpack a 48MB initramfs, the tmpfs needs 48MB of usable space. With the default 50% limit, this requires a memory pool of 96MB to be available for the tmpfs mount. The total memory requirement is therefore approximately: 16MB (vmlinuz) + 48MB (loaded initramfs) + 48MB (unpacked kernel) + 96MB (for tmpfs) + 12MB (runtime overhead) ≈ 220MB. By using initramfs_options=size=75%, the memory pool required for the 48MB tmpfs is reduced to 48MB / 0.75 = 64MB. This reduces the total memory requirement by 32MB (96MB - 64MB), allowing the kdump to succeed with a smaller crashkernel size, such as 192MB. An alternative approach of reusing the existing rootflags parameter was considered. However, a new, dedicated initramfs_options parameter was chosen to avoid altering the current behavior of rootflags (which applies to the final root filesystem) and to prevent any potential regressions. Also add documentation for the new kernel parameter "initramfs_options" This approach is inspired by prior discussions and patches on the topic. Ref: https://www.lightofdawn.org/blog/?viewDetailed=00128 Ref: https://landley.net/notes-2015.html#01-01-2015 Ref: https://lkml.org/lkml/2021/6/29/783 Ref: https://www.kernel.org/doc/html/latest/filesystems/ramfs-rootfs-initramfs.html#what-is-rootfs Signed-off-by: Lichen Liu <lichliu@redhat.com> Link: https://lore.kernel.org/20250815121459.3391223-1-lichliu@redhat.com Tested-by: Rob Landley <rob@landley.net> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-requiredMichael Riesch1-1/+14
commit c254815b02673cc77a84103c4c0d6197bd90c0ef upstream. There are variants of the Rockchip Innosilicon CSI DPHY (e.g., the RK3568 variant) that are powered on by default as they are part of the ALIVE power domain. Remove 'power-domains' from the required properties in order to avoid false positives. Fixes: 22c8e0a69b7f ("dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy") Cc: stable@kernel.org Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michael Riesch <michael.riesch@collabora.com> Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-2-a4f340a7f0cf@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-15Documentation: trace: historgram-design: Separate sched_waking histogram ↵Bagas Sanjaya1-1/+3
section heading and the following diagram [ Upstream commit 8c716e87ea33519920811338100d6d8a7fb32456 ] Section heading for sched_waking histogram is shown as normal paragraph instead due to codeblock marker for the following diagram being in the same line as the section underline. Separate them. Fixes: daceabf1b494 ("tracing/doc: Fix ascii-art in histogram-design.rst") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20250916054202.582074-5-bagasdotme@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19docs: networking: can: change bcm_msg_head frames member to support flexible ↵Alex Tran1-1/+1
array [ Upstream commit 641427d5bf90af0625081bf27555418b101274cd ] The documentation of the 'bcm_msg_head' struct does not match how it is defined in 'bcm.h'. Changed the frames member to a flexible array, matching the definition in the header file. See commit 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with flexible-array members") Signed-off-by: Alex Tran <alex.t.tran@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20250904031709.1426895-1-alex.t.tran@gmail.com Fixes: 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with flexible-array members") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217783 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19dt-bindings: serial: brcm,bcm7271-uart: Constrain clocksKrzysztof Kozlowski1-1/+1
commit ee047e1d85d73496541c54bd4f432c9464e13e65 upstream. Lists should have fixed constraints, because binding must be specific in respect to hardware, thus add missing constraints to number of clocks. Cc: stable <stable@kernel.org> Fixes: 88a499cd70d4 ("dt-bindings: Add support for the Broadcom UART driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250812121630.67072-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-11x86/vmscape: Enable the mitigationPawan Gupta2-0/+12
Commit 556c1ad666ad90c50ec8fccb930dd5046cfbecfb upstream. Enable the previously added mitigation for VMscape. Add the cmdline vmscape={off|ibpb|force} and sysfs reporting. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-11Documentation/hw-vuln: Add VMSCAPE documentationPawan Gupta2-0/+111
Commit 9969779d0803f5dcd4460ae7aca2bc3fd91bff12 upstream. VMSCAPE is a vulnerability that may allow a guest to influence the branch prediction in host userspace, particularly affecting hypervisors like QEMU. Add the documentation. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28bonding: Add independent control state machineAahil Awatramani1-0/+12
[ Upstream commit 240fd405528bbf7fafa0559202ca7aa524c9cd96 ] Add support for the independent control state machine per IEEE 802.1AX-2008 5.4.15 in addition to the existing implementation of the coupled control state machine. Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in the LACP MUX state machine for separated handling of an initial Collecting state before the Collecting and Distributing state. This enables a port to be in a state where it can receive incoming packets while not still distributing. This is useful for reducing packet loss when a port begins distributing before its partner is able to collect. Added new functions such as bond_set_slave_tx_disabled_flags and bond_set_slave_rx_enabled_flags to precisely manage the port's collecting and distributing states. Previously, there was no dedicated method to disable TX while keeping RX enabled, which this patch addresses. Note that the regular flow process in the kernel's bonding driver remains unaffected by this patch. The extension requires explicit opt-in by the user (in order to ensure no disruptions for existing setups) via netlink support using the new bonding parameter coupled_control. The default value for coupled_control is set to 1 so as to preserve existing behaviour. Signed-off-by: Aahil Awatramani <aahila@google.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 0599640a21e9 ("bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28mptcp: disable add_addr retransmission when timeout is 0Geliang Tang1-0/+2
[ Upstream commit f5ce0714623cffd00bf2a83e890d09c609b7f50a ] When add_addr_timeout was set to 0, this caused the ADD_ADDR to be retransmitted immediately, which looks like a buggy behaviour. Instead, interpret 0 as "no retransmissions needed". The documentation is updated to explicitly state that setting the timeout to 0 disables retransmission. Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout") Cc: stable@vger.kernel.org Suggested-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-5-521fe9957892@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Apply to net/mptcp/pm_netlink.c , structural changes in mptcp_pm_alloc_anno_list ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraintsKrzysztof Kozlowski1-1/+1
commit 2558df8c13ae3bd6c303b28f240ceb0189519c91 upstream. 'minItems' alone does not impose upper bound, unlike 'maxItems' which implies lower bound. Add missing clock constraint so the list will have exact number of items (clocks). Fixes: 2295bbd35edb ("dt-bindings: display: add Unisoc's mipi dsi controller bindings") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250720123003.37662-4-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraintsKrzysztof Kozlowski1-1/+1
commit 934da599e694d476f493d3927a30414e98a81561 upstream. 'minItems' alone does not impose upper bound, unlike 'maxItems' which implies lower bound. Add missing clock constraint so the list will have exact number of items (clocks). Fixes: 8cae15c60cf0 ("dt-bindings: display: add Unisoc's dpu bindings") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250720123003.37662-3-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28Documentation: ACPI: Fix parent device referencesAndy Shevchenko1-4/+4
commit e65cb011349e653ded541dddd6469c2ca813edcf upstream. The _CRS resources in many cases want to have ResourceSource field to be a type of ACPI String. This means that to compile properly we need to enclosure the name path into double quotes. This will in practice defer the interpretation to a run-time stage, However, this may be interpreted differently on different OSes and ACPI interpreter implementations. In particular ACPICA might not correctly recognize the leading '^' (caret) character and will not resolve the relative name path properly. On top of that, this piece may be used in SSDTs which are loaded after the DSDT and on itself may also not resolve relative name paths outside of their own scopes. With this all said, fix documentation to use fully-qualified name paths always to avoid any misinterpretations, which is proven to work. Fixes: 8eb5c87a92c0 ("i2c: add ACPI support for I2C mux ports") Reported-by: Yevhen Kondrashyn <e.kondrashyn@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250710170225.961303-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-15f2fs: doc: fix wrong quota mount option descriptionChao Yu1-3/+3
[ Upstream commit 81b6ecca2f15922e8d653dc037df5871e754be6e ] We should use "{usr,grp,prj}jquota=" to disable journaled quota, rather than using off{usr,grp,prj}jquota. Fixes: 4b2414d04e99 ("f2fs: support journalled quota") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10x86/bugs: Add a Transient Scheduler Attacks mitigationBorislav Petkov (AMD)2-0/+14
commit d8010d4ba43e9f790925375a7de100604a5e2dba upstream. Add the required features detection glue to bugs.c et all in order to support the TSA mitigation. Co-developed-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-10x86/bugs: Rename MDS machinery to something more genericBorislav Petkov (AMD)1-3/+1
Commit f9af88a3d384c8b55beb5dc5483e5da0135fadbd upstream. It will be used by other x86 mitigations. No functional changes. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-10scsi: ufs: core: Fix spelling of a sysfs attribute nameBart Van Assche1-1/+1
[ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ] Change "resourse" into "resource" in the name of a sysfs attribute. Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org Reviewed-by: Avri Altman <avri.altman@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06dt-bindings: serial: 8250: Make clocks and clock-frequency exclusiveYao Zi1-1/+1
commit 09812134071b3941fb81def30b61ed36d3a5dfb5 upstream. The 8250 binding before converting to json-schema states, - clock-frequency : the input clock frequency for the UART or - clocks phandle to refer to the clk used as per Documentation/devicetree for clock-related properties, where "or" indicates these properties shouldn't exist at the same time. Additionally, the behavior of Linux's driver is strange when both clocks and clock-frequency are specified: it ignores clocks and obtains the frequency from clock-frequency, left the specified clocks unclaimed. It may even be disabled, which is undesired most of the time. But "anyOf" doesn't prevent these two properties from coexisting, as it considers the object valid as long as there's at LEAST one match. Let's switch to "oneOf" and disallows the other property if one exists, precisely matching the original binding and avoiding future confusion on the driver's behavior. Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema") Cc: stable <stable@kernel.org> Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required propertiesAkhil R1-1/+23
commit 903cc7096db22f889d48e2cee8840709ce04fdac upstream. Specify the properties which are essential and which are not for the Tegra I2C driver to function correctly. This was not added correctly when the TXT binding was converted to yaml. All the existing DT nodes have these properties already and hence this does not break the ABI. dmas and dma-names which were specified as a must in the TXT binding is now made optional since the driver can work in PIO mode if dmas are missing. Fixes: f10a9b722f80 ("dt-bindings: i2c: tegra: Convert to json-schema”) Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Cc: <stable@vger.kernel.org> # v5.17+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andi Shyti <andi@smida.it> Link: https://lore.kernel.org/r/20250603153022.39434-1-akhilrajeev@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27Revert "x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2" ↵Breno Leitao1-2/+0
on v6.6 and older This reverts commit 594dbf0a19d607f106ed552332b9b8fecd2b64a3 which is commit 98fdaeb296f51ef08e727a7cc72e5b5c864c4f4d upstream. commit 7adb96687ce8 ("x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2") depends on commit 72c70f480a70 ("x86/bugs: Add a separate config for Spectre V2"), which introduced MITIGATION_SPECTRE_V2. commit 72c70f480a70 ("x86/bugs: Add a separate config for Spectre V2") never landed in stable tree, thus, stable tree doesn't have MITIGATION_SPECTRE_V2, that said, commit 7adb96687ce8 ("x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2") has no value if the dependecy was not applied. Revert commit 7adb96687ce8 ("x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2") in stable kernel which landed in in 5.4.294, 5.10.238, 5.15.185, 6.1.141 and 6.6.93 stable versions. Cc: David.Kaplan@amd.com Cc: peterz@infradead.org Cc: pawan.kumar.gupta@linux.intel.com Cc: mingo@kernel.org Cc: brad.spengler@opensrcsec.com Cc: stable@vger.kernel.org # 6.6 6.1 5.15 5.10 5.4 Reported-by: Brad Spengler <brad.spengler@opensrcsec.com> Reported-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27xfs: fix the contact address for the sysfs ABI documentationChristoph Hellwig1-4/+4
[ Upstream commit 9ff4490e2ab364ec433f15668ef3f5edfb53feca ] oss.sgi.com is long dead, refer to the current linux-xfs list instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27dt-bindings: vendor-prefixes: Add Liontron nameAndre Przywara1-0/+2
[ Upstream commit 9baa27a2e9fc746143ab686b6dbe2d515284a4c5 ] Liontron is a company based in Shenzen, China, making industrial development boards and embedded computers, mostly using Rockchip and Allwinner SoCs. Add their name to the list of vendors. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250505164729.18175-2-andre.przywara@arm.com Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04serial: mctrl_gpio: split disable_ms into sync and no_sync APIsAlexis Lothoré1-1/+1
[ Upstream commit 1bd2aad57da95f7f2d2bb52f7ad15c0f4993a685 ] The following splat has been observed on a SAMA5D27 platform using atmel_serial: BUG: sleeping function called from invalid context at kernel/irq/manage.c:738 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0 preempt_count: 1, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<00000000>] 0x0 hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74 Hardware name: Atmel SAMA5 Workqueue: hci0 hci_power_on [bluetooth] Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x44/0x70 dump_stack_lvl from __might_resched+0x38c/0x598 __might_resched from disable_irq+0x1c/0x48 disable_irq from mctrl_gpio_disable_ms+0x74/0xc0 mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4 atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8 atmel_set_termios from uart_change_line_settings+0x15c/0x994 uart_change_line_settings from uart_set_termios+0x2b0/0x668 uart_set_termios from tty_set_termios+0x600/0x8ec tty_set_termios from ttyport_set_flow_control+0x188/0x1e0 ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc] wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth] hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth] hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth] hci_power_on [bluetooth] from process_one_work+0x998/0x1a38 process_one_work from worker_thread+0x6e0/0xfb4 worker_thread from kthread+0x3d4/0x484 kthread from ret_from_fork+0x14/0x28 This warning is emitted when trying to toggle, at the highest level, some flow control (with serdev_device_set_flow_control) in a device driver. At the lowest level, the atmel_serial driver is using serial_mctrl_gpio lib to enable/disable the corresponding IRQs accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to disable_irq (called in mctrl_gpio_disable_ms) being possibly called in some atomic context (some tty drivers perform modem lines configuration in regions protected by port lock). Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one and a blocking one. Replace mctrl_gpio_disable_ms calls with the relevant version depending on whether the call is protected by some port lock. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Acked-by: Richard Genoud <richard.genoud@bootlin.com> Link: https://lore.kernel.org/r/20250217-atomic_sleep_mctrl_serial_gpio-v3-1-59324b313eef@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2Breno Leitao1-0/+2
[ Upstream commit 98fdaeb296f51ef08e727a7cc72e5b5c864c4f4d ] Change the default value of spectre v2 in user mode to respect the CONFIG_MITIGATION_SPECTRE_V2 config option. Currently, user mode spectre v2 is set to auto (SPECTRE_V2_USER_CMD_AUTO) by default, even if CONFIG_MITIGATION_SPECTRE_V2 is disabled. Set the spectre_v2 value to auto (SPECTRE_V2_USER_CMD_AUTO) if the Spectre v2 config (CONFIG_MITIGATION_SPECTRE_V2) is enabled, otherwise set the value to none (SPECTRE_V2_USER_CMD_NONE). Important to say the command line argument "spectre_v2_user" overwrites the default value in both cases. When CONFIG_MITIGATION_SPECTRE_V2 is not set, users have the flexibility to opt-in for specific mitigations independently. In this scenario, setting spectre_v2= will not enable spectre_v2_user=, and command line options spectre_v2_user and spectre_v2 are independent when CONFIG_MITIGATION_SPECTRE_V2=n. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Kaplan <David.Kaplan@amd.com> Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-2-b7ff1dab840e@debian.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04hwmon: (dell-smm) Increment the number of fansKurt Borja1-7/+7
[ Upstream commit dbcfcb239b3b452ef8782842c36fb17dd1b9092f ] Some Alienware laptops that support the SMM interface, may have up to 4 fans. Tested on an Alienware x15 r1. Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250304055249.51940-2-kuurtb@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18x86/its: Add "vmexit" option to skip mitigation on some CPUsPawan Gupta1-0/+2
commit 2665281a07e19550944e8354a2024635a7b2714a upstream. Ice Lake generation CPUs are not affected by guest/host isolation part of ITS. If a user is only concerned about KVM guests, they can now choose a new cmdline option "vmexit" that will not deploy the ITS mitigation when CPU is not affected by guest/host isolation. This saves the performance overhead of ITS mitigation on Ice Lake gen CPUs. When "vmexit" option selected, if the CPU is affected by ITS guest/host isolation, the default ITS mitigation is deployed. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-29 22:08:11 +0300