summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2025-01-21dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interruptNeil Armstrong1-3/+6
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt to the host CPU. This interrupt can be used by the device driver to handle PCIe link specific events such as Link up and Link down, which give the driver a chance to start bus enumeration on its own when link is up and initiate link training if link goes to a bad state. The PCIe driver can still work without this interrupt but it will provide a nice user experience when device gets plugged and removed. Document the interrupt as optional for SM8550 and SM8650 platforms. Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-1-4049cfccd073@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-21dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAMLFrank Li3-124/+173
Convert device tree binding document mobiveil-pcie.txt to YAML format and merge layerscape-pcie-gen4.txt into this file. Additional changes: - interrupt-names: "aer", "pme", "intr", which align order in examples. - reg-names: reorder as csr_axi_slave, config_axi_slave to match layerscape-pcie-gen4 and existing Layerscape DTS users. Fix below CHECK_DTBS warning: arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dtb: /soc/pcie@3400000: failed to match any schema with compatible: ['fsl,lx2160a-pcie'] Link: https://lore.kernel.org/r/20241211171318.4129818-1-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: fix typos, whitespace, consistent bus-range usage] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-01-20Merge tag 'cpufreq-arm-updates-6.14' of ↵Rafael J. Wysocki2-1/+64
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge ARM cpufreq updates for 6.14 from Viresh Kumar: "- Extended support for more SoCs in apple cpufreq driver (Hector Martin and Nick Chan). - Add new cpufreq driver for Airoha SoCs (Christian Marangi). - Fix using cpufreq-dt as module (Andreas Kemnade). - Minor fixes for Sparc, scmi, and Qcom drivers (Ethan Carter Edwards, Sibi Sankar and Manivannan Sadhasivam)." * tag 'cpufreq-arm-updates-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver cpufreq: sparc: change kzalloc to kcalloc cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT cpufreq: apple-soc: Increase cluster switch timeout to 400us cpufreq: apple-soc: Use 32-bit read for status register cpufreq: apple-soc: Allow per-SoC configuration of APPLE_DVFS_CMD_PS1 cpufreq: apple-soc: Drop setting the PS2 field on M2+ dt-bindings: cpufreq: apple,cluster-cpufreq: Add A7-A11, T2 compatibles dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq cpufreq: fix using cpufreq-dt as module cpufreq: scmi: Register for limit change notifications
2025-01-19dt-bindings: crypto: qcom,inline-crypto-engine: Document the SM8750 ICEGaurav Kashyap1-0/+1
Document the Inline Crypto Engine (ICE) on the SM8750 Platform. Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-01-19dt-bindings: crypto: qcom,prng: Document SM8750 RNGGaurav Kashyap1-0/+1
Document SM8750 compatible for the True Random Number Generator. Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-01-19dt-bindings: crypto: qcom-qce: Document the SM8750 crypto engineGaurav Kashyap1-0/+1
Document the crypto engine on the SM8750 Platform. Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-01-19Merge tag 'for-net-next-2025-01-15' of ↵Jakub Kicinski1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: Add new VID/PID 13d3/3610 for MT7922 - btusb: Add new VID/PID 13d3/3628 for MT7925 - btusb: Add MT7921e device 13d3:3576 - btusb: Add RTL8851BE device 13d3:3600 - btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x - btusb: add sysfs attribute to control USB alt setting - qca: Expand firmware-name property - qca: Fix poor RF performance for WCN6855 - L2CAP: handle NULL sock pointer in l2cap_sock_alloc - Allow reset via sysfs - ISO: Allow BIG re-sync - dt-bindings: Utilize PMU abstraction for WCN6750 - MGMT: Mark LL Privacy as stable * tag 'for-net-next-2025-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits) Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync Bluetooth: qca: Fix poor RF performance for WCN6855 Bluetooth: Allow reset via sysfs Bluetooth: Get rid of cmd_timeout and use the reset callback Bluetooth: Remove the cmd timeout count in btusb Bluetooth: Use str_enable_disable-like helpers Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc Bluetooth: btusb: Add RTL8851BE device 13d3:3600 dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750 Bluetooth: btusb: Add MT7921e device 13d3:3576 Bluetooth: btrtl: check for NULL in btrtl_setup_realtek() Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name() Bluetooth: qca: Expand firmware-name to load specific rampatch Bluetooth: qca: Update firmware-name to support board specific nvm dt-bindings: net: bluetooth: qca: Expand firmware-name property Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925 Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922 Bluetooth: btusb: add sysfs attribute to control USB alt setting Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x ... ==================== Link: https://patch.msgid.link/20250117213203.3921910-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-19Merge tag 'wireless-next-2025-01-17' of ↵Jakub Kicinski1-0/+204
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Most likely the last "new features" pull request for v6.14 and this is a bigger one. Multi-Link Operation (MLO) work continues both in stack in drivers. Few new devices supported and usual fixes all over. Major changes: cfg80211 * Emergency Preparedness Communication Services (EPCS) station mode support mac80211 * an option to filter a sta from being flushed * some support for RX Operating Mode Indication (OMI) power saving * support for adding and removing station links for MLO iwlwifi * new device ids * rework firmware error handling and restart rtw88 * RTL8812A: RFE type 2 support * LED support rtw89 * variant info to support RTL8922AE-VS mt76 * mt7996: single wiphy multiband support (preparation for MLO) * mt7996: support for more variants * mt792x: P2P_DEVICE support * mt7921u: TP-Link TXE50UH support ath12k * enable MLO for QCN9274 (although it seems to be broken with dual band devices) * MLO radar detection support * debugfs: transmit buffer OFDMA, AST entry and puncture stats * tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits) wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig wifi: wilc1000: unregister wiphy only after netdev registration wifi: cfg80211: adjust allocation of colocated AP data wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf() wifi: ath12k: fix key cache handling wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function wifi: ath12k: Remove ath12k_get_num_hw() helper function wifi: ath12k: Refactor the ath12k_hw get helper function argument wifi: ath12k: Refactor ath12k_hw set helper function argument wifi: mt76: mt7996: add implicit beamforming support for mt7992 wifi: mt76: mt7996: fix beacon command during disabling wifi: mt76: mt7996: fix ldpc setting wifi: mt76: mt7996: fix definition of tx descriptor wifi: mt76: connac: adjust phy capabilities based on band constraints wifi: mt76: mt7996: fix incorrect indexing of MIB FW event wifi: mt76: mt7996: fix HE Phy capability wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU wifi: mt76: mt7996: add max mpdu len capability wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain ... ==================== Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-19dt-bindings: mailbox: add google,gs101-mboxTudor Ambarus1-0/+69
Add bindings for the Samsung Exynos Mailbox Controller. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2025-01-19dt-bindings: mailbox: qcom: Add IPQ5424 APCS compatibleGokul Sriram Palanisamy1-0/+1
Add compatible for the Qualcomm IPQ5424 APCS block. Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2025-01-19dt-bindings: mailbox: add binding for Microchip IPC mailbox controllerValentina Fernandez1-0/+123
Add a dt-binding for the Microchip Inter-Processor Communication (IPC) mailbox controller. Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
2025-01-18Merge patch series "riscv: Add support for xtheadvector"Palmer Dabbelt2-0/+29
Charlie Jenkins <charlie@rivosinc.com> says: xtheadvector is a custom extension that is based upon riscv vector version 0.7.1 [1]. All of the vector routines have been modified to support this alternative vector version based upon whether xtheadvector was determined to be supported at boot. vlenb is not supported on the existing xtheadvector hardware, so a devicetree property thead,vlenb is added to provide the vlenb to Linux. There is a new hwprobe key RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 that is used to request which thead vendor extensions are supported on the current platform. This allows future vendors to allocate hwprobe keys for their vendor. Support for xtheadvector is also added to the vector kselftests. [1] https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361c61d335e03d3134b14133f/xtheadvector.adoc * b4-shazam-merge: riscv: Add ghostwrite vulnerability selftests: riscv: Support xtheadvector in vector tests selftests: riscv: Fix vector tests riscv: hwprobe: Document thead vendor extensions and xtheadvector extension riscv: hwprobe: Add thead vendor extension probing riscv: vector: Support xtheadvector save/restore riscv: Add xtheadvector instruction definitions riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT RISC-V: define the elements of the VCSR vector CSR riscv: vector: Use vlenb from DT for thead riscv: Add thead and xtheadvector as a vendor extension riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree dt-bindings: cpus: add a thead vlen register length property dt-bindings: riscv: Add xtheadvector ISA extension description Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-0-236c22791ef9@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-18dt-bindings: cpus: add a thead vlen register length propertyCharlie Jenkins1-0/+19
Add a property analogous to the vlenb CSR so that software can detect the vector length of each CPU prior to it being brought online. Currently software has to assume that the vector length read from the boot CPU applies to all possible CPUs. On T-Head CPUs implementing pre-ratification vector, reading the th.vlenb CSR may produce an illegal instruction trap, so this property is required on such systems. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Yangyu Chen <cyy@cyyself.name> Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-2-236c22791ef9@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-18dt-bindings: riscv: Add xtheadvector ISA extension descriptionCharlie Jenkins1-0/+10
The xtheadvector ISA extension is described on the T-Head extension spec Github page [1] at commit 95358cb2cca9. Link: https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361c61d335e03d3134b14133f/xtheadvector.adoc [1] Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Yangyu Chen <cyy@cyyself.name> Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-1-236c22791ef9@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-17regulator: dt-bindings: Add regulator-power-budget-milliwatt propertyKory Maincent1-0/+3
Introduce a new property to describe the power budget of the regulator. This property will allow power management support for regulator consumers like PSE controllers, enabling them to make decisions based on the available power capacity. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250115-feature_regulator_pw_budget-v2-2-0a44b949e6bc@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-17dt-bindings: usb: snps,dwc3: Split core descriptionBjorn Andersson2-390/+416
The Synopsys DWC3 core is found either as a standalone block or integrated with vendor glue logic. So far the latter has been described as two separate IP blocks in DeviceTree, but the two parts are not separate. In the case where the core is integrated together with vendor glue, resources such as clock and resets are often customized by the vendor, such that the standard properties doesn't make sense. Split the snps,dwc3 binding in a description of the core properties and the standard "glue" properties, in order to allow vendor bindings to inherit the core properties. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250113-dwc3-refactor-v3-1-d1722075df7b@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-17Merge branches 'arm/smmu/updates', 'arm/smmu/bindings', 'qualcomm/msm', ↵Joerg Roedel3-1/+24
'rockchip', 'riscv', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
2025-01-17dt-bindings: serial: 8250: Add SpacemiT K1 uart compatibleYixun Lan1-1/+3
Found SpacemiT's K1 uart controller is compatible with Intel's Xscale uart, but it's still worth to introduce a new compatible. Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17dt-bindings: interrupt-controller: Add SpacemiT K1 PLICYangyu Chen1-0/+1
Add compatible string for SpacemiT K1 PLIC. Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17dt-bindings: timer: Add SpacemiT K1 CLINTYangyu Chen1-0/+1
Add compatible string for SpacemiT K1 CLINT. Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17dt-bindings: riscv: add SpacemiT K1 bindingsYangyu Chen1-0/+28
Add DT binding documentation for the SpacemiT K1 SoC[1] and the Banana Pi BPi-F3 board[2] which used it. Link: https://www.spacemit.com/en/spacemit-key-stone-2/ [1] Link: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 [2] Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17dt-bindings: riscv: Add SpacemiT X60 compatiblesYangyu Chen1-0/+1
The X60 is RISC-V CPU cores from SpacemiT and currently used in their K1 SoC. Link: https://www.spacemit.com/en/spacemit-x60-core/ Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-16dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RCRichard Zhu3-6/+24
Previous Refclk of i.MX95 PCIe RC is on when system boot to kernel. But boot firmware change the behavior, it is off when boot. So it must be turned on when it is used. Also it needs be turned off/on for suspend and resume. Add one Refclk for i.MX95 PCIe RC. Increase clocks' maxItems to 5 and keep the same restriction with other compatible string. Link: https://lore.kernel.org/r/20241126075702.4099164-2-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-01-16dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-epFrank Li1-1/+37
Add new compatible string fsl,imx8q-pcie-ep for iMX8Q. The 'reg-names' property only needs 'dbi' and 'addr_space' because the others are located at a default offset. The new 'clock-names' property aligns with the Root Complex (RC) naming. Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-5-c4bfa5193288@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2025-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+19
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c 1f691a1fc4be ("r8169: remove redundant hwmon support") 152d00a91396 ("r8169: simplify setting hwmon attribute visibility") https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command") f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref") drivers/net/ethernet/intel/ice/ice_type.h 50327223a8bb ("ice: add lock to protect low latency interface") dc26548d729e ("ice: Fix quad registers read on E825") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16Merge tag 'amlogic-drivers-for-v6.14' of ↵Arnd Bergmann1-0/+14
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic drivers changes for v6.14: - Document the System Control registers found on early Meson SoC * tag 'amlogic-drivers-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: Document the System Control registers found on early Meson SoC Link: https://lore.kernel.org/r/d22513cc-c326-443c-982b-78adf755d3dc@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'qcom-arm64-for-6.14' of ↵Arnd Bergmann8-5/+408
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.14 This adds support for the new Snapdragon 8 Elite platform with MTP and QRD boards, QCS615 platform with the Ride board, QCS8300 platform with its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2 Gen1 Smart Viewer Development Kit. On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added. The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit 2023 are introduced. IPQ9574 gains PCIe and TRNG descriptions, together with a few other smaller improvements. TRNG is also enabled on the IPQ5332 platform. On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB interrupts are corrected. On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development kit gains description of the onboard LEDs. On QRB4210 RB2 support for HDMI audio playback is added. SA8775P gains missing clock controllers, CPUs are tied to PSCI power domains, DisplayPort is introduced and enabled on the Ride board. On SDM670 the GPU components are described and enabled for Google Pixel 3a, together with camera clock controller and flash LED. Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled. "global" IRQ for PCIe RC controllers are described on SM8550 and SM8650, to allow for hotplug events. Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615, and QCS8300. The X Elite platform gains QUP power domains and OPPs, another PCIe controller, another UART, and its SDHCI controllers. The ASUS Vivobook S 15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains audio configuration, SD card reader support, and USB retimers. The Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains retimers described. The Lenovo Thinkpad T14s has additional USB ports enabled, as well as sound and fingerprint sensor. USB U1/U2 entry is disabled across a variety of platforms, to improve USB stability. sleep clock frequencies are reviewed and corrected for a variety of platforms, so is also various remoteproc mmio address ranges. * tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits) arm64: dts: qcom: x1e80100-romulus: Update firmware nodes arm64: dts: qcom: msm8916-samsung-serranove: Add display panel arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: Remove unused and undocumented properties arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes arm64: dts: qcom: pmi8950: add LAB-IBB nodes arm64: dts: qcom: ipq5424: enable the download mode support arm64: dts: qcom: ipq5424: add scm node arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts arm64: dts: qcom: qcs8300-ride: Enable USB controllers arm64: dts: qcom: qcs8300: Add support for usb nodes arm64: dts: qcom: qcs8300: Add support for clock controllers arm64: dts: qcom: sm8450: Add coresight nodes arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions arm64: dts: qcom: qcs615-ride: Enable UFS node arm64: dts: qcom: qcs615: add UFS node arm64: dts: qcom: ipq5424: Add USB controller and phy nodes ... Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'v6.14-rockchip-dts64-1' of ↵Arnd Bergmann2-29/+66
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2 (SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM), Orange Pi 5 Max. A interesting case is the Radxa E52C using a soc called rk3582. This is rk3588-variant where some cpu cores are disabled during production and the bootloader needs to read the available cores from efuses and adapt the DT it hands over to the kernel. New supported peripherals are just the naneng combophy + the usb controllers using them on the rk3576 as well as the arm,smmu attached to the PCI controller on rk3588. And finally there are of course a number of board-specific enablements and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi 5+ etc. * tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits) arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM dt-bindings: arm: rockchip: Add Firefly ITX-3588J board arm64: dts: rockchip: Add Orange Pi 5 Max board dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi arm64: dts: rockchip: add WLAN to rk3588-evb1 controller arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5 arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules arm64: dts: rockchip: Add Radxa E52C dt-bindings: arm: rockchip: Add Radxa E52C arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2 dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2 arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC ... Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'ti-k3-dt-for-v6.14' of ↵Arnd Bergmann1-0/+10
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.14 Generic Fixups/Cleanups: - Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties for ethernet phy - Clock description added to ICSS-G SoC Specific features and Fixes: - Duplicate GICR reg defines in am62x/am62ax - Mailbox nodes are enabled at board level bringing AM67/j722s/am62p to same behavior as other K3 SoCs. - Introduction of deep-sleep state defines for pinctrl header AM62Ax - Enable ti-sysc for wkup_uart0 AM64: - Switch ICSSG clock to core clock. J7200: - Disable SPI1 loopback default. J784s4: - Clock ID fix for McSPI instances - Use j7200-padconf compatibility for padconf to enable suspend-to-ram support. Board Specific: AM62 - phyboard - hdmi bridge regulator and using 16bit input for hdmi bridge, vcc-supply for i2c eeprom - SK - SoC wakeup using USB1, Add bootph property around cpsw mac syscon node, M4 mailbox node redefinition fixup. - BeaglePlay: Fix ethernet phy reset time AM64 - hummingboard-t: Convert PCIE/USB overlays to independent dts. j7200: - EVM: fix typo in overlay name. j721e: - EVM: overlay for pcie1 endpoint mode. j722s: - EVM: Add mcu_i2c0 support for expansion pins., Add USB0 DFU support, Enable PMIC - AM67a-beagley-ai: Add remote proc nodes j784s4: - AM69-SK/ j784s4-EVM - Mark PMIC regulators with bootph-all property to indicate ones that are needed through boot phases. - AM69-sk: PIC0 Endpoint mode overlay, USB Superspeed mode. * tag 'ti-k3-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (31 commits) arm64: dts: ti: k3-am62a-wakeup: Configure ti-sysc for wkup_uart0 arm64: dts: ti: k3-j722s-evm: Enable PMIC arm64: dts: ti: k3-am69-sk: Add USB SuperSpeed support arm64: dts: ti: k3-am625-beagleplay: Fix DP83TD510E reset time arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts arm64: dts: ti: k3-am69-sk: Add overlay for PCIE0 Endpoint Mode arm64: dts: ti: k3-am68-sk-base-board: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: Makefile: Fix typo "k3-j7200-evm-pcie1-ep.dtbo" arm64: dts: ti: k3-j7200: Add node to disable loopback connection arm64: dts: ti: k3-j784s4: Use ti,j7200-padconf compatible arm64: dts: ti: k3-am62p-j722s-common-main: Enable USB0 for DFU boot arm64: dts: ti: k3-am62a: Remove duplicate GICR reg arm64: dts: ti: k3-am62: Remove duplicate GICR reg arm64: dts: ti: k3-am67a-beagley-ai: Add remote processor nodes arm64: dts: ti: k3-am62p: Enable Mailbox nodes at the board level arm64: dts: ti: k3-am625-sk: Remove M4 mailbox node redefinition arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0 arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties ... Link: https://lore.kernel.org/r/20250110210812.bdpypzvmg6s6sr5t@itinerary Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615Sayali Lokhande1-0/+2
Document the Universal Flash Storage(UFS) Host Controller on the Qualcomm QCS615 Platform. Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Co-developed-by: Xin Liu <quic_liuxin@quicinc.com> Signed-off-by: Xin Liu <quic_liuxin@quicinc.com> Link: https://lore.kernel.org/r/20241216095439.531357-2-quic_liuxin@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-16dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindingsVaradarajan Narayanan1-0/+1
Update dt-bindings to add IPQ5424 to USB DWC3 controller list. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20241118052839.382431-6-quic_varada@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-16Merge tag 'arm-soc/for-6.14/devicetree-arm64' of ↵Arnd Bergmann1-0/+1
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 6.14: - Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5) - Rob removes some undocumented properties - Same ensures that the CFE stub area is reserved to allow secondary CPUs to be successfully brought up in Linux, also making sure that the address used in the spin table is also carved out. Finally he adds support for the Zyxel EX3510-B router using BCM4906 - Rosen converts the BCM4908 platforms to use the more flexible nvmem-layout representation * tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: bcm4908: nvmem-layout conversion arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906 arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area arm64: dts: broadcom: Remove unused and undocumented properties arm64: dts: broadcom: Add DT for D-step version of BCM2712 arm64: dts: broadcom: Add display pipeline support to BCM2712 arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT Link: https://lore.kernel.org/r/20250109224756.3632025-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'arm-soc/for-6.14/devicetree' of ↵Arnd Bergmann2-0/+3
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree updates for 6.14, please pull the following: - Rob removes some unused and undocumented properties pertaining to the SPI flash controller on Broadcom boards - Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO, MDIO, LED controller, DMA and then proceeds with adding support for the GEnexsis XG6846B PON router - Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform * tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: meraki-mr26: set mac address for gmac0 ARM: dts: broadcom: Add Genexis XG6846B DTS file dt-bindings: arm: bcmbca: Add Genexis XG6846B dt-bindings: vendor-prefixes: Add Genexis ARM: dts: bcm6846: Add ARM PL081 DMA block ARM: dts: bcm6846: Add LED controller ARM: dts: bcm6846: Add MDIO control block ARM: dts: bcm6846: Add GPIO blocks ARM: dts: bcm6846: Enable watchdog ARM: dts: bcm6846: Add iproc rng arm: dts: broadcom: Remove unused and undocumented properties Link: https://lore.kernel.org/r/20250109224756.3632025-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'sunxi-dt-for-6.14' of ↵Arnd Bergmann1-1/+3
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner Device Tree changes for 6.14 - Add support for DMA engine and audio codec on F1C100s and enable audio codec on Lichee Pi Nano - Add syscon and SRAM nodes for A100 - Enable CPU DVFS for Tanix TX1 - Explicitly configure TCON0 pixel clock parent according to display output used This includes one commit shared with the clock tree dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI which adds the macros for the TCON0 pixel clock parents. * tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0 dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI arm64: dts: allwinner: h313: enable DVFS for Tanix TX1 arm64: dts: allwinner: a100: Add syscon nodes dt-bindings: sram: sunxi-sram: Add A100 compatible ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano ARM: dts: suniv: f1c100s: Add support for Audio Codec ARM: dts: suniv: f1c100s: Add support for DMA Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'mtk-dts64-for-v6.14' of ↵Arnd Bergmann3-16/+64
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt MediaTek ARM64 DeviceTree updates for v6.14 This adds a few cleanups, enhances support for upstreamed SoCs and machines, other than adding new ones. In particular, fixes and improvements: - MT8516 gets a few fixes for GICv2, Watchdog and I2C, and support for the Keypad controller; - MT8390 Genio 700 board gets basic audio support; - MT8365 gets an alias for its integrated ethernet controller; - MT8195 gets an important fix for system suspend: all of the machines based on this SoC and its IoT variant can now properly perform PM Suspend to RAM; - MT8188 gets support for its Mali GPU with DVFS and a fix for the OVL Hardware found in the Display Controller using the right compatible strings; - MT8186 Chromebooks can now suspend properly thanks to a fix moving the USB wakeups from XHCI to MTU3 (USB) controller; - MT8183 Chromebooks get a fix for their DMIC microphone and proper support for their second-source touchscreen; - MT7988 SoC and the BananaPi R4 board gets support for Pinctrl, eMMC/SD, Thermal, CPU DVFS, PCI-Express, and peripherals like the RT5190A PMIC, PCA9545 I2C mux, and others; - MT7986 BananaPi R3 board gets support for SATA power socket; And cleanups: - Dropped regulator-compatible property from MediaTek DTs; - Aligned thermal node names with bindings on MT8183 Kukui; - MT6397 PMIC get proper sub-node names, fixing dt validation; - The property enabling Wake-On-Lan feature changed in all of the boards and driver to match the actual meaning of it (mediatek,mac-wol now enables wol on mac instead of phy); - Compatibles for MediaTek PMIC Keypad are added to bindings and can now pass dts validation; ...and the newly added machines are: - MT8188 (Ciri) Lenovo Chromebook Duet - MT8186 (Starmie) ASUS Chromebook Enterprise CM30 - MT8186 (Chinchou) ASUS Chromebook CZ12 and CZ12 Flip * tag 'mtk-dts64-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (71 commits) arm64: dts: mediatek: mt8516: add keypad node arm64: dts: mediatek: add per-SoC compatibles for keypad nodes dt-bindings: mediatek,mt6779-keypad: add more compatibles arm64: dts: mediatek: mt8365-evk: Set ethernet alias dts: arm64: mediatek: mt8195: Remove MT8183 compatible for OVL dts: arm64: mediatek: mt8188: Update OVL compatible from MT8183 to MT8195 dt-bindings: display: mediatek: ovl: Modify rules for MT8195/MT8188 dt-bindings: display: mediatek: ovl: Add compatible strings for MT8188 MDP3 dt-bindings: arm: mediatek: Drop MT8192 Chromebook variants that never shipped arm64: dts: mediatek: mt8192: Drop Chromebook variants that never shipped arm64: dts: mediatek: mt7988a-bpi-r4: Add proc-supply for cpus arm64: dts: mediatek: mt7988a-bpi-r4: Add MediaTek MT6682A/RT5190A PMIC arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4 arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1 arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart ... Link: https://lore.kernel.org/r/20250108100826.32458-1-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'at91-dt-6.14' of ↵Arnd Bergmann2-6/+15
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.14 This update includes: - power monitor support for the SAM9X75 Curiosity board (using the PAC1934 device) - fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1 EK and SAMA5D29 Curiosity boards) - partial support for the SAMA7D65 SoC - cleanups * tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node ARM: dts: at91: Add sama7d65 pinmux dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity ARM: dts: microchip: sam9x75_curiosity: Add power monitor support ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi Link: https://lore.kernel.org/r/20250107081424.758980-2-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'renesas-dts-for-v6.14-tag2' of ↵Arnd Bergmann1-2/+5
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.14 (take two) - Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II EVK development board, - Add Image Signal Processor helper block (FCPVX and VSPX) support for the R-Car V4H SoC, - Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders arm64: dts: renesas: r8a779g0: Add VSPX instances arm64: dts: renesas: r8a779g0: Add FCPVX instances arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol arm64: dts: renesas: r9a09g047: Add pincontrol node arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros dt-bindings: pinctrl: renesas: Document RZ/G3E SoC dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'sti-dt-for-v6.14-round1' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt Add and enable MALI400 support for STiH410-b2260 * tag 'sti-dt-for-v6.14-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: st: enable the MALI gpu on the stih410-b2260 ARM: dts: st: add node for the MALI gpu on stih410.dtsi dt-bindings: gpu: mali-utgard: Add st,stih410-mali compatible Link: https://lore.kernel.org/r/f44cb1f0-4d91-4e25-8b1f-3dd9a7bed62b@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'imx-bindings-6.14' of ↵Arnd Bergmann1-0/+9
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings change for 6.14: - Add compatibles for i.MX8MP based SoM and carrier from ABB * tag 'imx-bindings-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add ABB SoM and carrier Link: https://lore.kernel.org/r/20250105095139.714590-2-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'icc-6.14-rc1' of ↵Greg Kroah-Hartman3-0/+140
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Pull interconnect changes from Georgi: interconnect changes for 6.14 This pull request contains the interconnect changes for the 6.14-rc1 merge window. It contains one new driver and DT documentation updates for L3 and bandwidth monitors. Driver changes: - New driver for the SM8750 platform - Add DT compatibles for QCS615 BWMON and SM8650 OSM Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc: dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles interconnect: sm8750: Add missing const to static qcom_icc_desc interconnect: qcom: Add interconnect provider driver for SM8750 dt-bindings: interconnect: add interconnect bindings for SM8750
2025-01-16Merge tag 'iio-fixes-for-6.13b' of ↵Greg Kroah-Hartman1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Merge from Jonathan: IIO: 2nd set of fixes for the 6.13 cycle. Given timing so late in cycle and that they are all confined to specific drivers, it is fine for these to go upstream early in the 6.14 cycle. hid-sensors - Handle processed attention channel rather than just returning an error. adi,ad3552r - Fix output ranges for ad3541r and ad3542r. - Clear the reset status flag so that we can pick up any resets during operation. adi,ad5791 - Fix a misleading dt binding example where the sense of the interrupt was reversed. adi,ad7606 - Fix some hard coded offsets that should be taking the number of channels on a particular part into account. These were missed due to some racing changes. ams,as73211 - Fix an off by one in optimized path for just reading the colour channels. bosch,bme680 - Fix type of variable passed as pointer, ensuring it works on big endian systems and doesn't expose uninitialized data. * tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: dac: ad3552r-hs: clear reset status flag iio: dac: ad3552r-common: fix ad3541/2r ranges iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw() iio: light: as73211: fix channel handling in only-color triggered buffer dt-bindings: iio: dac: ad5791: ldac gpio is active low iio: hid-sensor-prox: Fix invalid read_raw for attention iio: adc: ad7606: Fix hardcoded offset in the ADC channels
2025-01-16dt-bindings: pinctrl: sunxi: add compatible for V853Andras Szemzo1-0/+13
Add compatible strings for V853 family pinctrl. Signed-off-by: Andras Szemzo <szemzo.andras@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/20250110123923.270626-3-szemzo.andras@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-01-16dt-bindings: clock: st,stm32-rcc: support spread spectrum clockingDario Binacchi1-0/+36
The addition of DT bindings for enabling and tuning spread spectrum clocking generation is available only for the main PLL of stm32f{4,7} platforms. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114182021.670435-3-dario.binacchi@amarulasolutions.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16dt-bindings: clock: convert stm32 rcc bindings to json-schemaDario Binacchi3-139/+109
The patch converts st,stm32-rcc.txt to the JSON schema, but it does more than that. The old bindings, in fact, only covered the stm32f{4,7} platforms and not the stm32h7. Therefore, to avoid patch submission tests failing, it was necessary to add the corresponding compatible (i. e. st,stm32h743-rcc) and specify that, in this case, 3 are the clocks instead of the 2 required for the stm32f{4,7} platforms. Additionally, the old bindings made no mention of the st,syscfg property, which is used by both the stm32f{4,7} and the stm32h7 platforms. The patch also fixes the files referencing to the old st,stm32-rcc.txt. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114182021.670435-2-dario.binacchi@amarulasolutions.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16dt-bindings: power: supply: max17042: add max77705 supportDzmitry Sankouski1-0/+1
Add max77705 fuel gauge support. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Link: https://lore.kernel.org/r/20250108-starqltechn_integration_upstream-v14-2-f6e84ec20d96@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2025-01-15Merge tag 'spi-mem-dtr-2' into nand/nextMiquel Raynal12-12/+110
spi: Support DTR in spi-mem Changes to support DTR with spi-mem.
2025-01-15Merge tag 'samsung-dt64-6.14' of ↵Arnd Bergmann2-0/+124
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.14 1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and I2C controllers in the camera block (HSI2C in CAM0-3). 2. Exynos990: Add Power Management Unit (Samsung block), PMU (performance) for M5 cluster and two clock controllers. 3. ExynosAutov920: Add watchdog and DMA controllers. 4. Google GS101: Minor fixes for phy and USB. Add USB Type-C. 5. Exynos850-e850-96 board: Drop gap in memory layout. 6. New SoC: Exynos9810. 7. New boards, all mobile phones: - Exynos9810: Samsung Galaxy S9 (SM-G960F) - Exynos990: Samsung Galaxy S20 FE (SM-G780F) Samsung Galaxy S20 5G (SM-G980F) * tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (23 commits) arm64: dts: exynos8895: Add camera hsi2c nodes arm64: dts: exynos990: Add clock management unit nodes arm64: dts: exynos: gs101-oriole: add pd-disable and typec-power-opmode arm64: dts: exynos: gs101-oriole: enable Maxim max77759 TCPCi arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F) arm64: dts: exynos: Add Exynos9810 SoC support arm64: dts: exynos850-e850-96: Specify reserved secure memory explicitly arm64: dts: exynos990: Add a PMU node for the third cluster arm64: dts: exynosautov920: Add DMA nodes arm64: dts: exynos8895: Add a PMU node for the second cluster dt-bindings: clock: samsung: Add Exynos990 SoC CMU bindings arm64: dts: exynosautov920: add watchdog DT node arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte) arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s) arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (x1s-common) dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board arm64: dts: exynos: gs101: allow stable USB phy Vbus detection arm64: dts: exynos: gs101: phy region for exynos5-usbdrd is larger MAINTAINERS: add myself and Tudor as reviewers for Google Tensor SoC arm64: dts: exynos990: Add pmu and syscon-reboot nodes ... Link: https://lore.kernel.org/r/20241231131742.134329-4-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'ath-next-20250114' of ↵Kalle Valo1-0/+204
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patches for v6.14 This development cycle again featured multiple patchsets to ath12k to support the new 802.11be MLO feature, this time including the device grouping infrastructure, and the advertisement of MLO support to the wireless core. However the MLO feature is still considered to be incomplete. In addition, there was the usual set of bug fixes and cleanups, mostly in ath12k, but also in ath9k.
2025-01-15dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750Janaki Ramaiah Thota1-5/+0
We are now using the on-chip PMU node for power sequencing to manage the enable/disable functionality of Bluetooth. Consequently, the inputs previously marked as required under the Bluetooth node can be removed. For instance, the enable GPIO is now managed by the PMU node with the property bt-enable-gpios. Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15dt-bindings: net: bluetooth: qca: Expand firmware-name propertyCheng Jiang1-1/+4
Expand the firmware-name property to specify the names of NVM and rampatch firmware to load. This update will support loading specific firmware (nvm and rampatch) for certain chips, like the QCA6698 Bluetooth chip, which shares the same IP core as the WCN6855 but has different RF components and RAM sizes, requiring new firmware files. We might use different connectivity boards on the same platform. For example, QCA6698-based boards can support either a two-antenna or three-antenna solution, both of which work on the sa8775p-ride platform. Due to differences in connectivity boards and variations in RF performance from different foundries, different NVM configurations are used based on the board ID. So In firmware-name, if the NVM file has an extension, the NVM file will be used. Otherwise, the system will first try the .bNN (board ID) file, and if that fails, it will fall back to the .bin file. Possible configurations: firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv"; firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; firmware-name = "QCA6698/hpnv21.bin"; Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-06-06 22:56:00 +0300