| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently the flexcan driver does only support adding PHYs by using the
"old" regulator bindings. Add support for CAN transceivers as a PHY.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250312-flexcan-add-transceiver-caps-v4-1-29e89ae0225a@liebherr.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
It makes sense that ARRAY_SIZE(prop) should == ARRAY_SIZE(prop-names),
so allow that to happen with interrupts.
Fixes bogus warnings such as:
usb@c2f8800: interrupt-names: ['pwr_event', 'qusb2_phy', 'hs_phy_irq'] is too short
Fixes: 53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250308-topic-dt_bindings_fixes_usb-v2-1-3169a3394d5b@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for the 6.15 cycle.
The usual mixture of new drivers, support in existing drivers for new
devices, a range of features and general subsystem cleanup.
Two merges of immutable branches in here:
* SPI offload support. Culmination of a long effort to bring the ability
to offload triggered sequences of SPI operations to specific hardware,
allow high datarate acquisition over an SPI bus (if you have the right
hardware / FPGA firmware)
* GPIO set-array-helper - enables code simplification.
New device support
==================
adi,ad3552r-hs:
- Add support for AD3541r and AD3542r via newly supported FPGA HDL.
adi,ad4030
- New driver supporting the AD4030, AD4630 AD4630-16, AD4640-24, AD4632-16,
AD4632-24 1 and 2 channel high precision SPI ADCs.
adi,ad4851
- New driver and backend support for the AD4851, AD4852, AD4853, AD4854,
AD4855, AD4846, AD4857, AD4858 and AD4858I high speed multichannel
simultaneous sampling ADCs.
adi,ad7191
- New driver for this 24-bit ADC for precision bridge applications,
adi,ad7380
- Add support for the adaq4381-4 which is a 14-bit version of the
already supported adaq4380-1
adi,adis16550
- New driver using the ADIS library (which needed extensions) for this
IMU.
brcm,apds9160
- New driver for this proximity and ambient light sensor.
dynaimage,al3000a
- New driver for this illuminance sensor.
mcube,mc3230
- Add support for the mc3510c accelerometer with a different scale to existing
supported parts (some rework preceded this)
nxp,imx93
- Add compatibles for imx94 and imx95 which are fully compatible with imx93.
rockchip,saradc
- Add support for the RK3528 ADC
- Add support for the RK3562 ADC
silab,si7210
- New driver to support this I2C Hall effect magnetic position sensor.
ti,ads7138
- New driver supporting the ADS7128 and AD7138 I2C ADCs.
Staging driver drop
===================
adi,adis16240
- Drop this impact sensor. Interesting part but complex hence never left
staging due to ABI challenges. No longer readily available so drop driver.
New features
============
Documentation
- A really nice overview document introduce ADC terminology and how
it maps to IIO.
core
- New description for FAULT events, used in the ad7173.
- filter_type ABI used in ad4130.
buffer-dmaengine
- Split DMA channel request from buffer allocation (for SPI offload)
- Add a new _with_handle setup variant. (for SPI offload)
adi,adf4371
- Add control of reference clock type and support for frequency doubling
where appropriate.
adi,ad4695
- Support SPI offload.
- Support oversampling control.
adi,ad5791
- Support SPI offload.
adi,ad7124
- Add channel calibration support.
adi,ad7380:
- Alert support (threshold interrupts)
- SPI offload support.
adi,ad7606
- Support writing registers when using backend enabling software control
of modes.
adi,ad7944
- Support SPI offload.
adi,ad9832
- Use devm_regulator_get_enable() to simplify code.
adi,ad9834
- Use devm_regulator_get_enable() to simplify code.
adi,adxl345
- Improve IRQ handling code.
- Add debug access to registers.
bosch,bmi270
- Add temperature channel support.
- Add data ready trigger.
google,cross_ec
- Add trace events.
mcube,mc3230
- Add mount matrix support
- Add an OF match table.
Cleanup and minor bug fixes
===========================
Tree wide:
- Stop using iio_device_claim_direct_scoped() and introduce sparse friendly
iio_device_claim/release_direct()
The conditional scoped cleanup has proved hard to deal with, requiring
workarounds for various compiler issues and in is rather non-intuitive
so abandon that experiment. One of the attractions of that approach was
that it made it much harder to have unbalanced claim/release bugs so
instead introduce a conditional-lock style boolean returning new pair
of functions. These are inline in the header and have __acquire and
__release calls allowing sparse to detect lack of balance. There are
occasional false positives but so far those have reflected complex code
paths that benefited from cleanup anyway.
The first set of driver conversions are in this pull request, more to
follow next cycle. Various related cleanup in drivers.
Removal of the _scoped code is completed and the definition removed.
- Use of str_enable_disable() and similar helpers.
- Don't set regmap cache to REGCACHE_NONE as that's the default anyway.
- Change some caches from RBTREE to MAPLE reflecting best practice.
- Use the new gpiod_multi_set_value_cansleep()
- Make sure to grab direct mode for some calibrations paths.
- Avoid using memcmp on structures when checking for matching channel configs.
Instead just match field by field.
dt-bindings:
- Fix up indentation inconsistencies.
gts-helper:
- Simplify building of available scale table.
adi,ad-sigma-delta
- Make sure to disable channel after calibration done.
- Add error handling in configuring channel during calibration.
adi,ad2s1201
- use a bitmap_write() rather than directly accessing underlying storage.
adi,ad3552r-hs
- Fix a wrong error message.
- Make sure to use instruction mode for configuration.
adi,ad4695
- Add a conversion to ensure exit from conversion mode.
- Use custom regmap to handle required sclk rate change.
- Fix an out of bounds array access
- Simplify oversampling ratio handling.
adi,ad4851
- Fix a sign bug.
adi,ad5791
- Fix wrong exported number of storage bits.
adi,ad7124
- Disable all channels at probe to avoid strange initial configurations.
adi,ad7173
- Rework to allow static const struct ad_sigma_delta without need
to make a copy.
adi,ad7623
- Drop a BSD license tag that the authors consider unnecessary.
adi,ad7768-1
- Fix channels sign description exposed to user space.
- Set MOSI idle state to avoid accidental device reset.
- Avoid some overkill locking.
adi,axi-dac
- Check if device interface is busy when enabling data stream.
- Add control of bus mode.
bosch,bmi270
- Move a struct definition to a c file as only used there.
vishay,veml6030
- Enable regmap cache to reduce bus traffic.
- Fix ABI bug around scale reporting.
vishay,vem6075
- Check array bounds to harden against broken hardware.
Various other minor tweaks and fixes not called out.
*
* tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (223 commits)
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
iio: adc: ad7124: Implement system calibration
iio: adc: ad7124: Implement internal calibration at probe time
iio: adc: ad_sigma_delta: Add error checking for ad_sigma_delta_set_channel()
iio: adc: ad4130: Adapt internal names to match official filter_type ABI
iio: adc: ad7173: Fix comparison of channel configs
iio: adc: ad7124: Fix comparison of channel configs
iio: adc: ad4130: Fix comparison of channel setups
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.15
1. HDMI fixup and refinement
2. Move to devm_platform_ioremap_resource() usage
3. Add MT8188 dsc compatible
4. Fix config_updating flag never false when no mbox channel
5. dp: drm_err => dev_err in HPD path to avoid NULL ptr
6. Add dpi power-domains example
7. Add MT8365 SoC support
8. Fix error codes in mtk_dsi_host_transfer()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312232909.9304-1-chunkuang.hu@kernel.org
|
|
Merge series from Maud Spierings <maudspierings@gocontroll.com>:
Add inital support for 2 variants of the Moduline Display controller
module slot. This system is powered by the Ka-Ro Electronics tx8p-ml81
COM, which features an imx8mp SoC.
|
|
Merge series from Ryan Walklin <ryan@testtoast.com>:
Hi All,
V3 of this patch adding headphone jack detection support to the Anbernic RGnnXX series of handhelds. V3 corrects my misunderstanding of derivation of ALSA UCM file paths, and adds recieved Reviewed-by and Tested-by tags. Thanks to those that have reviewed and fed back on previous versions.
Original message below:
This series adds the required device tree bindings to describe GPIOs for jack detection in the sun4i-codec driver, adds support for jack detection to the codec machine driver, and describes the hardware configuration in the RG35XX DTS. The existing speaker amplifier GPIO pin can then be used in concert with jack detection to enable userspace sound servers (via an ALSA UCM configuration) to disable the speaker route when headphones are connected.
Thanks to Chris Morgan for his assistance putting this series together.
Regards,
Ryan
Chris Morgan (2):
ASoC: dt-bindings: sun4i-a10-codec: add hp-det-gpios
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
Ryan Walklin (3):
ASoC: sun4i-codec: correct dapm widgets and controls for h616
ASoC: sun4i-codec: support hp-det-gpios property
ASoC: sun4i-codec: add h616 card long_name
.../sound/allwinner,sun4i-a10-codec.yaml | 6 ++
.../sun50i-h700-anbernic-rg35xx-2024.dts | 5 +-
sound/soc/sunxi/sun4i-codec.c | 57 ++++++++++++++++++-
3 files changed, 66 insertions(+), 2 deletions(-)
--
2.48.1
|
|
The driver support more SoCs. Add the missing ones.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250213092728.11659-2-wsa+renesas@sang-engineering.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
MT7988 has 2 different spi controllers. Add their compatibles.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241109105029.52748-1-linux@fw-web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add remote processor PAS loader for SM8750 MPSS (modem). Device looks
fully compatible with SM8650, however it lacks fifth memory region for
Qlink Logging, according to downstream sources. This is a bit tricky,
because updated downstream sources for newer downstream release dropped
that fifth memory region as well.
There might be other differences against SM8650, because the modem
currently crashes after starting.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221160300.160404-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible for "qcom,msm8916-acc", used in msm8916.dtsi, to the dt
schema.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710155226.130086-1-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Devices integrating Allwinner SoCs may use line-out or headphone jacks
with jack detection circuits attached to a GPIO. Support defining these
in DTs.
A number of Anbernic devices featuring the H700 SoC use this mechanism
to switch between a headphone jack and an internal speaker, so add these
to the allowed routing items.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
--
Changelog v1..v2:
- Remove vendor prefix from hp-det-gpios
Changelog v2..v3:
- Add Reviewed-by tag
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-2-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the bindings that describe a GOcontroll Moduline module slot. This
slot provides all the interfaces to interface with a Moduline compatible
IO module. The actual module is not reasonable to describe as it can be
swapped at will, with this connector the driver will be able to probe
for a module on boot.
The connector consists of 2 parts, one part for interfacing with the SoC
and main board, the other part has 13 IO channels for the module to
interact with the outside world. The functions of these IO channels are
determined by the type of module in the slot. The IO on the SoC side is
as follows:
- a 3v3 supply, this tends to be the logic level of the module and its
microcontroller
- a 5v0 supply, this can be used to power low power peripherals on the
module
- a 6v-8v supply, this can be used for high power peripherals on the
module
- a 6v-30v supply, this tends to be a dirty supply that comes from the
controller supply after some circuit protection, or is the same as
the 6v-8v supply.
- an SPI bus which carries the communication between the SoC and the
microcontroller on the module.
- an I2C bus shared between the SoC and all module slots which can
carry direct module-to-module communication.
- a reset line
- an interrupt line that indicates a clear to transmit signal
- a sync line shared between the SoC and all module slots which could
be used to synchronize modules for time sensitive IO spread across
modules.
- a SMBus alert line that is shared between the modules but is not
connected to the SoC so that is ignored.
A slot-number property is used to identify the physical location of a
module slot. Without it, it would be impossible to identify which module
to control if there are multiple of one type, to address the desired IO.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-3-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
GOcontroll produces embedded linux systems and IO modules to use in
these systems, add its prefix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-2-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A variant of TAS2770 known as TAS5770L is found in Apple Silicon Macs.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-2-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The TI SN012776 is a variant of TAS2764 found in Apple Silicon Macs.
It continues Apple's long-standing policy of getting vendors to
spin out subtly incompatible and Apple-exclusive variants of their
publicly available parts.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-1-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the Xiaomi Redmi Note 8 (codenamed ginkgo),
which is based off the SM6125 SoC.
Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250311003353.8250-2-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add the new QCM6490 compatible to support the reset functionality for
Low Power Audio subsystem.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-1-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the TI clkctrl clock device tree binding to json-schema.
Specify the creator of the original binding as a maintainer.
reg property is used mostly with one item, in am3xxx also with
an arbitrary number of items, so divert from the original binding
specifying two (probably meaning one address and one size).
The consumer part of the example is left out because the full consumer
node would be needed.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250311180215.173634-1-andreas@kemnade.info
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Assert and deassert functionality of the DSP found on i.MX8MP is
realized by combining control bits from two modules: Audio Block
Control and Debug Access Port.
Audio block control bits are used to Run/Stall the DSP core
while the DAP bits are used for software reset the core.
The original plan was to use fsl,dsp-ctrl property and to refer the
audiomix bits via syscon interface. This proposal received NACK from
community we shouldn't abuse the syscon interface [1].
So remove fsl,dsp-ctrl property for i.MX8MP and use reset control
interface instead.
Example dts node only uses runstall control now, but softreset will
be added in the future when we will convert the softreset functionality
to use reset controller API.
[1] https://patchwork.kernel.org/project/imx/patch/20250212085222.107102-6-daniel.baluta@nxp.com/
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-3-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The A523 contains a pin controller similar to previous SoCs, although
using 10 GPIO banks (PortB-PortK), all of them being IRQ capable.
With this SoC we introduce a new style of binding, where the pinmux values
for each pin group are stored in the new "allwinner,pinmux" property in
the DT node, instead of requiring every driver to store a mapping between
the function names and the required pinmux.
Add a new binding file, since all the different variants of the old
binding are making the file a bit unwieldy to handle already, and the new
property would make the situation worse.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250306235827.4895-7-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The kernel communicates with the E902 core through the mailbox
transport using AON firmware protocol. Add dt-bindings to document it
the dt node.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250311171900.1549916-2-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
S2MPU05 is a PMIC found in Exynos7870 devices, which controls voltage
regulators (21 LDOs and 5 BUCKs). Provide documentation for devicetree
definitions, regulator naming patterns, etc.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-1-808d0b47a564@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The `snps,dwmac.yaml` binding currently sets `maxItems: 3` for the
`interrupts` and `interrupt-names` properties, but vendor bindings
selecting `snps,dwmac.yaml` do not impose these limits.
Define constraints for `interrupts` and `interrupt-names` properties in
various DWMAC vendor bindings to ensure proper validation and consistency.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/20250309003301.1152228-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All Rockchip GMAC variants typically write to GRF regs to control e.g.
interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3562,
RK3576 and RK3588 use a mix of GRF and peripheral GRF regs.
Prior to the commit b331b8ef86f0 ("dt-bindings: net: convert
rockchip-dwmac to json-schema") the property rockchip,grf was listed
under "Required properties". During the conversion this was lost and
rockchip,grf has since then incorrectly been treated as optional and
not as required.
Similarly, when rockchip,php-grf was added to the schema in the
commit a2b77831427c ("dt-bindings: net: rockchip-dwmac: add rk3588 gmac
compatible") it also incorrectly has been treated as optional for all
GMAC variants, when it should have been required for RK3588, and later
also for RK3576.
Update this binding to require rockchip,grf and rockchip,php-grf to
properly reflect that GRF (and peripheral GRF for RK3576/RK3588) is
required to control part of GMAC.
This should not introduce any breakage as all Rockchip GMAC nodes have
been added together with a rockchip,grf phandle (and rockchip,php-grf
where required) in their initial commit.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250308213720.2517944-2-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
System Controller Firmware(SCU) reset some peripherals, such as CSI. So add
reset-controller for it.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250210-8qxp_camera-v3-1-324f5105accc@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add documentation for SAM9X7 reset controller.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20241010120419.93043-1-varshini.rajendran@microchip.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
DPI is part of the display / multimedia block in MediaTek SoCs, and
always have a power-domain (at least in the upstream device-trees).
Add the power-domains property to the binding example.
Fixes: 9273cf7d3942 ("dt-bindings: display: mediatek: convert the dpi bindings to yaml")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231023-display-support-v7-1-6703f3e26831@baylibre.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add new entry for stm32mp215-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-9-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add new entry for stm32mp235-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-6-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add the new syscon compatibles for STM32MP21 syscfg = "st,stm32mp21-syscfg"
and for STM32MP23 syscfg = "st,stm32mp23-syscfg".
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-4-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add new entry for stm32mp257f-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-1-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Document the support for the watchdog IP available on RZ/G3E SoC. The
watchdog IP available on RZ/G3E SoC is identical to the one found on
RZ/V2H SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250126132633.31956-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The Allwinner A523 uses the same MMC IP as the D1.
Introduce the new specific compatible strings, and use them with
fallbacks to the D1 strings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250307005712.16828-3-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
New Allwinner SoCs only occasionally update their MMC IP, leading to many
pairs of compatible strings, though there are sometimes a number of them
being compatible with one particular SoC.
Collate the compatible string listing in the binding, to group those
being compatible together. This makes the list more readable, and allows
for easier addition of new SoC's MMC devices.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250307005712.16828-2-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SDHCI controller in Rockchip RK3528 is similar to the one included
in RK3588.
Add compatible string for the SDHCI controller in RK3528.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250305214108.1327208-2-jonas@kwiboo.se
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add RK3528 compatible string for SD/SDIO interface.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250309055348.9299-2-ziyao@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SD/MMC block on the RZ/G3E ("R9A09G047") SoC is similar to that
of the RZ/V2H, but the SD0 channel has only dedicated pins, so we must
use SD_STATUS register to control voltage and power enable (internal
regulator), for non-fixed voltage (SD) MMC interface. However, it is
optional for fixed voltage MMC interface (eMMC).
For SD1 and SD2 channels, we can either use gpio regulator or internal
regulator (using SD_STATUS register) for voltage switching.
Document RZ/G3E SDHI IP support with optional internal regulator for
both RZ/G3E and RZ/V2H SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250305092958.21865-2-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The dw-mshc core on Rockchip's RK3562 is the same as the one already
included in RK3288. Extend the binding accordingly to allow
compatible = "rockchip,rk3562-dw-mshc", "rockchip,rk3288-dw-mshc";
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227111913.2344207-4-kever.yang@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The eMMC core on Rockchip's RK3562 is the same as the one already
included in RK3588. Extend the binding accordingly to allow
compatible = "rockchip,rk3562-dwcmshc", "rockchip,rk3588-dwcmshc";
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227111913.2344207-3-kever.yang@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add POWERTIP PH128800T004-ZZA01 10.1" LCD-TFT LVDS panel compatible
string.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311-add-powertip-ph128800t004-v1-1-7f95e6984cea@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
The Allwinner A523/T527 SoCs have four CCUs, this adds the binding for
the main and the PRCM R-CCU.
The source clock list differs in some annoying details, and folding this
into the existing Allwinner CCU clock binding document gets quite
unwieldy, so create a new document for these CCUs.
Add the new compatible string, along with the required input clock
lists. This conditionally describes the input clock lists, to make
adding support for the other two CCUs easier.
Also add the DT binding headers, listing all the clocks with their ID
numbers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250307002628.10684-5-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The Maxim max15301, max15303, and max20751 devices are all simple PMBus
devices already in use, but have not been documented.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250307230907.840875-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The "ibm,fsi2pib" compatible was originally in the binding, but it
changed to "ibm,p9-scom" in the end. However, both compatibles are in
use, so just support both.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250307230822.832936-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
This is a backmerge from Linux 6.14-rc6, needed for the nova PR.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add compatible string "nxp,imx94-adc" and "nxp,imx95-adc", which is
backward compatible with i.MX93. Set it to fall back to "nxp,imx93-adc".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250306170825.239933-1-Frank.Li@nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
AD7191 is a pin-programmable, ultra-low noise 24-bit sigma-delta ADC
designed for precision bridge sensor measurements. It features two
differential analog input channels, selectable output rates,
programmable gain, internal temperature sensor and simultaneous
50Hz/60Hz rejection.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Lechner<dlechner@baylibre.com>
Link: https://patch.msgid.link/20250228141327.262488-2-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Convert atmel,hsmci documentation to yaml format. The new file will inherit
from mmc-controller.yaml.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250224-mmc-slot-v4-2-231620a31e88@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The compatible property is required for some vendor-specific device trees,
such as Amlogic's meson-mx-sdio, but is unnecessary for others, like
Microchip's DTS. To resolve unintended warnings for configurations that do
not require it, remove compatible from the required properties in
mmc-slot.yaml.
Since meson-mx-sdio still requires compatible, explicitly add it to its
required list in amlogic,meson-mx-sdio.yaml.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250224-mmc-slot-v4-1-231620a31e88@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add compatible string "fsl,imx94-usdhc" for the i.MX94 chip, which is
backward compatible with i.MX8mm. Set it to fall back to
"fsl,imx8mm-usdhc".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250306170937.242183-1-Frank.Li@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
