| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
|
|
* clk-scmi:
clk: scmi: Add duty cycle ops only when duty cycle is supported
* clk-qcom: (27 commits)
clk: qcom: gcc-sc8280xp: drop obsolete PCIe GDSC comment
clk: qcom: tcsrcc-x1e80100: Set the bi_tcxo as parent to eDP refclk
clk: qcom: dispcc-glymur: Constify 'struct qcom_cc_desc'
clk: qcom: gcc: Add support for Global Clock controller found on MSM8937
dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller
clk: qcom: Select the intended config in QCS_DISPCC_615
clk: qcom: common: Fix NULL vs IS_ERR() check in qcom_cc_icc_register()
clk: qcom: alpha-pll: convert from round_rate() to determine_rate()
clk: qcom: milos: Constify 'struct qcom_cc_desc'
clk: qcom: gcc: Add support for Global Clock Controller
dt-bindings: clock: qcom: document the Glymur Global Clock Controller
clk: qcom: clk-alpha-pll: Add support for Taycan EKO_T PLL
clk: qcom: rpmh: Add support for Glymur rpmh clocks
clk: qcom: Add TCSR clock driver for Glymur SoC
dt-bindings: clock: qcom: Document the Glymur SoC TCSR Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Glymur SoCs
clk: qcom: dispcc-glymur: Add support for Display Clock Controller
dt-bindings: clock: Add DISPCC and reset controller for GLYMUR SoC
clk: qcom: gcc-sdm660: Add missing LPASS/CDSP vote clocks
dt-bindings: clock: gcc-sdm660: Add LPASS/CDSP vote clocks/GDSCs
...
* clk-broadcom:
clk: bcm: rpi: Maximize V3D clock
clk: bcm: rpi: Turn firmware clock on/off when preparing/unpreparing
clk: bcm: rpi: Add missing logs if firmware fails
|
|
* clk-imx:
clk: imx95-blk-ctl: Save/restore registers when RPM routines are called
clk: imx95-blk-ctl: Save platform data in imx95_blk_ctl structure
* clk-allwinner:
clk: sunxi-ng: add support for the A523/T527 MCU CCU
clk: sunxi-ng: div: support power-of-two dividers
clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
clk: sunxi-ng: sun6i-rtc: Add A523 specifics
* clk-ti:
clk: keystone: sci-clk: use devm_kmemdup_array()
clk: ti: am33xx: keep WKUP_DEBUGSS_CLKCTRL enabled
|
|
* clk-samsung:
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
clk: samsung: exynos990: Add PERIC0 and PERIC1 clock support
dt-bindings: clock: exynos990: Add PERIC0 and PERIC1 clock units
clk: samsung: exynos990: Add missing USB clock registers to HSI0
clk: samsung: exynos990: Add LHS_ACEL gate clock for HSI0 and update CLK_NR_TOP
dt-bindings: clock: exynos990: Add LHS_ACEL clock ID for HSI0 block
clk: samsung: artpec-8: Add initial clock support for ARTPEC-8 SoC
clk: samsung: Add clock PLL support for ARTPEC-8 SoC
dt-bindings: clock: Add ARTPEC-8 clock controller
clk: samsung: exynos990: Add DPU_BUS and CMUREF mux/div and update CLKS_NR_TOP
dt-bindings: clock: exynos990: Extend clocks IDs
clk: samsung: exynos990: Replace bogus divs with fixed-factor clocks
clk: samsung: exynos990: Fix CMU_TOP mux/div bit widths
clk: samsung: exynos990: Use PLL_CON0 for PLL parent muxes
clk: samsung: pll: convert from round_rate() to determine_rate()
clk: samsung: cpu: convert from round_rate() to determine_rate()
clk: samsung: fsd: Add clk id for PCLK and PLL in CAM_CSI block
dt-bindings: clock: Add CAM_CSI clock macro for FSD
* clk-tegra:
clk: tegra: dfll: Add CVB tables for Tegra114
clk: tegra: Add DFLL DVCO reset control for Tegra114
dt-bindings: arm: tegra: Add ASUS TF101G and SL101
dt-bindings: reset: Add Tegra114 CAR header
dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101)
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C
* clk-amlogic:
clk: amlogic: fix recent code refactoring
clk: amlogic: c3-peripherals: use helper for basic composite clocks
clk: amlogic: align s4 and c3 pwm clock descriptions
clk: amlogic: add composite clock helpers
clk: amlogic: use the common pclk definition
clk: amlogic: introduce a common pclk definition
clk: amlogic: pclk explicitly use CLK_IGNORE_UNUSED
clk: amlogic: drop CLK_SET_RATE_PARENT from peripheral clocks
clk: amlogic: move PCLK definition to clkc-utils
clk: amlogic: aoclk: use clkc-utils syscon probe
clk: amlogic: use probe helper in mmio based controllers
clk: amlogic: add probe helper for mmio based controllers
clk: amlogic: drop meson-clkcee
clk: amlogic: naming consistency alignment
|
|
'clk-spacemit' into clk-next
* clk-bindings:
dt-bindings: clock: mediatek: Add power-domains property
dt-bindings: clock: silabs,si5341: Add missing properties
dt-bindings: clock: adi,axi-clkgen: add clock-output-names property
dt-bindings: clock: Remove unused fujitsu,mb86s70-crg11 binding
dt-bindings: clock: Convert silabs,si570 to DT schema
dt-bindings: clock: Convert silabs,si5341 to DT schema
dt-bindings: clock: Convert silabs,si514/544 to DT schema
* clk-cleanup:
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
dt-bindings: clock: st: flexgen: remove deprecated compatibles
clk: st: flexgen: remove unused compatible
clk: clk-axi-clkgen: remove unneeded semicolon
clk: tegra: Remove redundant semicolons
clk: npcm: select CONFIG_AUXILIARY_BUS
clk: remove unneeded 'fast_io' parameter in regmap_config
* clk-renesas: (27 commits)
clk: renesas: r9a09g05[67]: Reduce differences
clk: renesas: r9a09g047: Add USB3.0 clocks/resets
clk: renesas: cpg-mssr: Fix memory leak in cpg_mssr_reserved_init()
clk: renesas: r9a09g056: Add clock and reset entries for I3C
clk: renesas: r9a09g057: Add clock and reset entries for I3C
dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks
clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks
clk: renesas: rzv2h: Simplify polling condition in __rzv2h_cpg_assert()
clk: renesas: rzv2h: Re-assert reset on deassert timeout
clk: renesas: rzg2l: Re-assert reset on deassert timeout
clk: renesas: rzg2l: Simplify rzg2l_cpg_assert() and rzg2l_cpg_deassert()
dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet clock IDs
clk: renesas: r9a09g047: Add GPT clocks and resets
clk: renesas: r9a09g077: Add module clocks for SCI1-SCI5
clk: renesas: rzv2h: remove round_rate() in favor of determine_rate()
clk: renesas: rzg2l: convert from round_rate() to determine_rate()
clk: renesas: r9a07g04[34]: Use tabs instead of spaces
clk: renesas: r9a07g043: Add MSTOP for RZ/G2UL
clk: renesas: r9a07g044: Add MSTOP for RZ/G2L
clk: renesas: r9a08g045: Add MSTOP for GPIO
...
* clk-thead:
clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL
clk: thead: support changing DPU pixel clock rate
clk: thead: add support for enabling/disabling PLLs
clk: thead: Correct parent for DPU pixel clocks
clk: thead: th1520-ap: fix parent of padctrl0 clock
clk: thead: th1520-ap: describe gate clocks with clk_gate
* clk-spacemit:
clk: spacemit: fix i2s clock
clk: spacemit: introduce pre-div for ddn clock
dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock
clk: spacemit: ccu_pll: convert from round_rate() to determine_rate()
clk: spacemit: ccu_mix: convert from round_rate() to determine_rate()
clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate()
clk: spacemit: fix sspax_clk
dt-bindings: clock: spacemit: CLK_SSPA_I2S_BCLK for SSPA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A couple of new device support and small driver updates for this
round.
New support:
- Intel idxd Wildcat Lake family support
- SpacemiT K1 PDMA controller support
- Renesas RZ/G3E family support
Updates:
- Xilinx shutdown support and dma client properties update
- Designware edma callback_result support"
* tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs
dmaengine: dw-edma: Set status for callback_result
dmaengine: mv_xor: match alloc_wc and free_wc
dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing
dmaengine: mmp_pdma: Add operations structure for controller abstraction
dmaengine: mmp_pdma: Add reset controller support
dmaengine: mmp_pdma: Add clock support
dt-bindings: dma: Add SpacemiT K1 PDMA controller
dt-bindings: dmaengine: xilinx_dma: Remove DMA client properties
dmaengine: Fix dma_async_tx_descriptor->tx_submit documentation
dmaengine: xilinx_dma: Support descriptor setup from dma_vecs
dmaengine: sh: setup_xref error handling
dmaengine: Replace zero-length array with flexible-array
dmaengine: ppc4xx: Remove space before newline
dmaengine: idxd: Add a new IAA device ID for Wildcat Lake family platforms
dmaengine: idxd: Replace memset(0) + strscpy() with strscpy_pad()
dt-bindings: dma: nvidia,tegra20-apbdma: Add undocumented compatibles and "clock-names"
dmaengine: zynqmp_dma: Add shutdown operation support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"The usual bunch of device support and update to drivers.
New Support
- Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2
repeater support, QCS8300 eDP PHY support
- Renesas RZ/T2H and RZ/N2H support and updates to driver for that
- TI TCAN1051 phy support
- Rockchip rk3588 dphy support, RK3528 combphy support
Updates:
- cadence updates for calibration and polling for ready and enabling
of lower resolutions, runtime pm support,
- Rockchip: enable U3 otg port
- Renesas USXGMII mode support
- Qualcomm UFS PHY and PLL regulator load support"
* tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits)
phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines
phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0
dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant
dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
phy: cadence: cdns-dphy: Enable lower resolutions in dphy
phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X
dt-bindings: phy: Add Sophgo CV1800 USB phy
phy: cadence: cdns-dphy: Update calibration wait time for startup state machine
phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
phy: lynx-28g: check return value when calling lynx_28g_pll_get
phy: qcom: m31-eusb2: Fix the error log while enabling clock
phy: rockchip: usbdp: Remove redundant ternary operators
phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
phy: hisilicon: Remove redundant ternary operators
phy: qcom-qmp-ufs: Add PHY and PLL regulator load
...
|
|
MediaTek MT8196 has Mali-G925-Immortalis GPU. panthor drm driver gained
support for it recently.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250913002155.1163908-2-olvaffe@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Improve the DT bindings documentation for the highbanck, imx and
xgene-ahci controllers (Krzysztof, Fabio, Rob)
* tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: apm,xgene-ahci: Add apm,xgene-ahci-v2 support
dt-bindings: ata: imx: Document 'target-supply'
dt-bindings: ata: highbank: Minor whitespace cleanup in example
|
|
Convert the APM XGene RTC binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250924222848.2949235-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- switch longson32 platform to DT and use MIPS_GENERIC framework
- cleanups/fixes for lantiq DTs
- other cleanups and fixes
* tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
mips: math-emu: replace deprecated strcpy() in me-debugfs
MIPS: configs: Consolidate Loongson1 defconfigs
MIPS: Unify Loongson1 PRID_REV
MIPS: loongson32: Switch to generic core
MIPS: loongson: Add built-in DTB support
MIPS: dts: loongson: Add CQ-T300B board
MIPS: dts: loongson: Add Smartloong-1C board
MIPS: dts: loongson: Add LSGZ_1B_DEV board
MIPS: dts: loongson: Add LS1B-DEMO board
dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B
mips: lantiq: danube: rename stp node on EASY50712 reference board
mips: lantiq: xway: sysctrl: rename stp clock
MIPS: RB532: Replace deprecated strcpy() with memcpy() and strscpy()
MIPS: Loongson64: Replace deprecated strcpy() with strscpy_pad()
MIPS: generic: Replace deprecated strcpy() in ocelot_detect()
MIPS: octeon: Replace deprecated strcpy() in octeon_model_get_string_buffer()
MIPS: octeon: Replace memset(0) + deprecated strcpy() with strscpy_pad()
MIPS: arc: Replace deprecated strcpy() with memcpy()
MIPS: txx9: Replace deprecated strcpy() with strscpy()
MIPS: sni: Replace deprecated strcpy() in sni_console_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here are some small updates for tty/serial drivers for 6.18-rc1.
Not many changes overall, just the usual:
- abi cleanups and reworking of the tty functions by Jiri by adding
console lock guard logic
- 8250_platform driver updates
- qcom-geni driver updates
- other minor serial driver updates
- some more vt escape codes added
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (43 commits)
tty: serial: fix help message for SERIAL_CPM
serial: 8250: omap: Support wakeup pinctrl state on suspend
dt-bindings: serial: 8250_omap: Add wakeup pinctrl state
serial: max310x: improve interrupt handling
vt: move vc_saved_screen to within tty allocated judgment
Revert "m68k: make HPDCA and HPAPCI bools"
tty: remove redundant condition checks
tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()
vt: remove redundant check on vc_mode in con_font_set()
serial: qcom-geni: Add DFS clock mode support to GENI UART driver
m68k: make HPDCA and HPAPCI bools
tty: n_gsm: Don't block input queue by waiting MSC
serial: qcom-geni: Fix off-by-one error in ida_alloc_range()
serdev: Drop dev_pm_domain_detach() call
serial: sc16is7xx: drop redundant conversion to bool
vt: add support for smput/rmput escape codes
serial: stm32: allow selecting console when the driver is module
serial: 8250_core: fix coding style issue
tty: serial: Modify the use of dev_err_probe()
s390/char/con3270: use tty_port_tty guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Enable coredump support for the i.MX HiFi core remoteproc, and clean
up the i.MX remoteproc driver.
- Introduce remoteprocs on the Qualcomm Milos platform. Gracefully shut
own the ADSP remoteproc when bootloader has loaded the "Lite"
firmware on X Elite. Improve the resource handover procedure to avoid
possibly duplicate handling.
- Transition the TI DA8xx, TI Keystone, and TI Wakeup M3 remoteproc
drivers to handle resources using devres.
* tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (29 commits)
remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()
remoteproc: qcom: pas: Drop redundant assignment to ret
remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E
remoteproc: qcom: q6v5: Avoid handling handover twice
remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice
remoteproc: qcom: pas: Add Milos remoteproc support
dt-bindings: remoteproc: qcom,milos-pas: Document remoteprocs
remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974
remoteproc: imx_rproc: Clean up after ops introduction
remoteproc: imx_rproc: Simplify IMX_RPROC_SMC switch case
remoteproc: imx_rproc: Simplify IMX_RPROC_SCU_API switch case
remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case
remoteproc: imx_rproc: Move imx_rproc_dcfg closer to imx_rproc_of_match
remoteproc: imx_rproc: Introduce start/stop/detect_mode ops for imx_rproc_dcfg
remoteproc: k3: Correctly release some resources allocated in k3_rproc_request_mbox()
remoteproc: wkup_m3: Use devm_rproc_add() helper
remoteproc: wkup_m3: Use devm_rproc_alloc() helper
remoteproc: wkup_m3: Use devm action to call PM runtime put sync
remoteproc: wkup_m3: Use devm_pm_runtime_enable() helper
remoteproc: keystone: Use devm_rproc_add() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64:
- thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472:
- Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi:
- Add WMI driver for Redmibook keyboard
- think-lmi:
- Certificate support for ThinkCenter
- x86-android-tables + others:
- Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: pcengines-apuv2: Use static device properties
platform/x86: meraki-mx100: Use static device properties
platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
platform/x86: x86-android-tablets: Move Acer info to its own file
platform/x86: x86-android-tablets: Update my email address
platform/x86: x86-android-tablets: Simplify node-group [un]registration
platform/x86: x86-android-tablets: use swnode_group instead of manual registering
platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
platform/x86: x86-android-tablets: remove support for GPIO lookup tables
platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
platform/x86: x86-android-tablets: convert EDT devices to GPIO references
platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18, part 2
rtl9300 updates:
- general cleanups
- implemented block read/write support
- added RTL9310 support
|
|
Adjust the regex for child-node address to account for the fact that
RTL9310 supports 12 instead of only 8 SDA lines. Also, narrow this per
variant.
Add a vendor-specific property to explicitly specify the SCL line number
of the defined I2C controller/master. This is required, in particular
for RTL9310, to operate on the correct SCL for each controller. Require
this property to be specified for RTL9310.
Add compatibles for known SoC variants RTL9311, RTL9312 and RTL9313.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-9-jelonek.jonas@gmail.com
|
|
Fix wording of binding description to use plural because there is not
only a single RTL9300 SoC. RTL9300 describes a whole family of Realtek
SoCs.
Add missing word 'of' in description of reg property.
Change 'SDA pin' to 'SDA line number' because the property must contain
the SDA (channel) number ranging from 0-7 instead of a real pin number.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-3-jelonek.jonas@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC build fix from Arnd Bergmann:
"One commit for the dt bindings was missing from the dt branch, this
one is already pending in the clk tree that contains the corresponding
device driver"
* tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
dt-bindings: clock: Add ARTPEC-8 clock controller
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus
assorted cleanups and fixes.
The only core update is to sd.c and is mostly cosmetic"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits)
scsi: MAINTAINERS: Update FC element owners
scsi: mpt3sas: Update driver version to 54.100.00.00
scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate
scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate
scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate
scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate
scsi: ufs: dt-bindings: Document gear and rate limit properties
scsi: ufs: core: Fix data race in CPU latency PM QoS request handling
scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill()
scsi: storvsc: Remove redundant ternary operators
scsi: ufs: core: Change MCQ interrupt enable flow
scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()
scsi: lpfc: Copyright updates for 14.4.0.11 patches
scsi: lpfc: Update lpfc version to 14.4.0.11
scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int
scsi: lpfc: Clean up extraneous phba dentries
...
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
|
|
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs
it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics STM32MP25
in host and endpoint modes (Christian Bruel)
* pci/controller/stm32:
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings
pinctrl: Add pinctrl_pm_select_init_state helper function
Documentation: pinctrl: Describe PM helper functions for standard states.
|
|
- Check for existence of struct cdns_pcie.ops before using it to allow
Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the Sophgo SG2042 PCIe controller (Chen
Wang)
* pci/controller/sophgo:
PCI: sg2042: Add Sophgo SG2042 PCIe driver
PCI: cadence: Check for the existence of cdns_pcie::ops before using it
dt-bindings: pci: Add Sophgo SG2042 PCIe host
|
|
- Add optional sys clock ready time setting to avoid sys_clk_rdy signal
glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino
Del Regno)
* pci/controller/mediatek-gen3:
PCI: mediatek-gen3: Add support for MediaTek MT8196 SoC
dt-bindings: PCI: mediatek-gen3: Add support for MT6991/MT8196
PCI: mediatek-gen3: Implement sys clock ready time setting
|
|
- Update DT binding example to separate PERST# to a Root Port stanza to
make multiple Root Ports possible in the future (Sai Krishna Musham)
- Add driver support for Root Port PERST# (Sai Krishna Musham)
* pci/controller/amd-mdb:
PCI: amd-mdb: Add support for PCIe RP PERST# signal handling
dt-bindings: PCI: amd-mdb: Add example usage of reset-gpios for PCIe RP PERST#
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm in this cycle from the feature POV, but
there were lots of cleanup works in the wide-range of code for
converting with the auto-cleanup macros like guard().
The mostly user-visible changes are the support of a couple of new
compress-offload API extensions, and the support of new ASoC codec /
platform drivers as well as USB-audio quirks.
Here we go with some highlights:
Core:
- Compress-offload API extension for 64bit timestamp support
- Compress-offload API extension for OPUS codec support
- Workaround for PCM locking issue with PREEMPT_RT and softirq
- KCSAN warning fix for ALSA sequencer core
ASoC:
- Continued cleanup works for ASoC core APIs
- Lots of cleanups and conversions of DT bindings
- Substantial maintainance work on the Intel AVS drivers
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754 and TAS2783A
- Remove support for TI WL1273 for old Nokia systems
USB-audio:
- Support for Tascam US-144mkII, Presonus S1824c support
- More flexible quirk option handling
- Fix for USB MIDI timer bug triggered by fuzzer
Others:
- A large series of cleanups with guard() & co macros over (non-ASoC)
sound drivers (PCI, ISA, HD-audio, USB-audio, drivers, etc)
- TAS5825 HD-audio side-codec support"
* tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (454 commits)
ALSA: usb-audio: don't hardcode gain for output channel of Presonus Studio
ALSA: usb-audio: add the initial mix for Presonus Studio 1824c
ALSA: doc: improved docs about quirk_flags in snd-usb-audio
ALSA: usb-audio: make param quirk_flags change-able in runtime
ALSA: usb-audio: improve module param quirk_flags
ALSA: usb-audio: add two-way convert between name and bit for QUIRK_FLAG_*
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free
ALSA: usb-audio: add mono main switch to Presonus S1824c
ALSA: compress: document 'chan_map' member in snd_dec_opus
ASoC: cs35l56: Add support for CS35L56 B2 silicon
ASoC: cs35l56: Set fw_regs table after getting REVID
ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100
ASoc: tas2783A: Fix an error code in probe()
ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075
ASoC: stm32: sai: manage context in set_sysclk callback
ASoC: renesas: msiof: ignore 1st FSERR
ASoC: renesas: msiof: Add note for The possibility of R/L opposite Capture
ASoC: renesas: msiof: setup both (Playback/Capture) in the same time
ASoC: renesas: msiof: tidyup DMAC stop timing
...
|
|
and versal-net
When the binding for the Cadence spi controller was written, a dedicated
compatible was added for the zynq device. Later when zynqmp and
versal-net, which also use this spi controller IP, were added they did
not receive soc-specific compatibles. Add them now, with a fallback to
the existing compatible for the r1p6 version of the IP so that there
will be no functional change. Retain the r1p6 in the string, to match
what was done for zynq.
Disallow the cdns,spi-r1p6 compatible in isolation to "encourage" people
to actually add soc-specific compatible strings in the future.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20251001-basics-grafting-a1a214ef65ac@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"Pinkesh Vaghela adds support for the ESWIN EIC7700 SoC consisting of
SiFive Quad-Core P550 CPU cluster and the first development board that
uses it, the SiFive HiFive Premier P550 [1].
This adds initial device tree and also adds ESWIN architecture
support.
Boot-tested using intiramfs with Linux v6.17-rc3 on HiFive Premier
P550 board using U-Boot 2024.01 and OpenSBI 1.4"
Link: https://lore.kernel.org/linux-riscv/20250825132427.1618089-1-pinkesh.vaghela@einfochips.com/ [1]
* tag 'soc-newsoc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: eswin: add HiFive Premier P550 board device tree
riscv: dts: add initial support for EIC7700 SoC
dt-bindings: interrupt-controller: Add ESWIN EIC7700 PLIC
dt-bindings: riscv: Add SiFive HiFive Premier P550 board
riscv: Add Kconfig option for ESWIN platforms
dt-bindings: riscv: Add SiFive P550 CPU compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are mostly thermal driver updates, including new thermal drivers
for Renesas RZ/G3S and Renesas RZ/G3E SoCs, a new power slider
platform feature support in the Intel int340x thermal driver, a new
Tegra114- specific SOCTHERM driver and more.
There is also a Step-wise thermal governor update allowing it to start
reducing cooling somewhat earlier if the temperature of the given
thermal zone is falling down and a thermal testing code cleanup.
Specifics:
- Add new thermal driver for the Renesas RZ/G3S SoC (Claudiu Beznea)
- Add new thermal driver for the Renesas RZ/G3E SoC (John Madieu)
- Add support for new platform power slider feature to the Intel
int340x driver (Srinivas Pandruvada).
- Add new Tegra114-specific SOCTHERM driver and document Tegra114
SOCTHERM Thermal Management System in DT bindings (Svyatoslav
Ryhel)
- Add temperature sensor channel to thermal-generic-adc (Svyatoslav
Ryhel)
- Add support for per-SoC default trim values to the Renesas
rcar_gen3 thermal driver, use it for adding R-Car V4H default trim
values, fix a comment typo in that driver and document Gen4 support
in its Kconfig entry (Marek Vasut)
- Fix mapping SoCs to generic Gen4 entry in the Renesas rcar_gen3
thermal driver (Wolfram Sang)
- Document the TSU unit in the r9a08g045-tsu and r9a09g047-tsu DT
bindings (Claudiu Beznea, John Madieu)
- Make LMH select QCOM_SCM and add missing IRQ includes to the
qcom/lmh thermal driver (Dmitry Baryshkov)
- Fix incorrect error message in the qcom/lmh thermal driver (Sumeet
Pawnikar)
- Add QCS615 compatible to tsens thermal DT bindings (Gaurav Kohli)
- Document the Glymur temperature sensor in qcom-tsens thermal DT
bindings (Manaf Meethalavalappu Pallikunhi)
- Make k3_j72xx_bandgap thermal driver register the thermal sensor
with hwmon (Michael Walle)
- Tighten GRF requirements in the rockchip thermal DT bindings,
silence a GRF warning in the rockchip thermal driver and unify
struct rockchip_tsadc_chip format in it (Sebastian Reichel)
- Update the Step-wise thermal governor to allow it to reduce the
cooling level earlier if thermal zone temperature is dropping and
clean it up (Rafael Wysocki)
- Clean up the thermal testing code (Rafael Wysocki)
- Assorted cleanups of thermal drivers (Jiapeng Chong, Salah Triki,
Osama Abdelkader)"
* tag 'thermal-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (37 commits)
thermal/drivers/renesas/rzg3e: Fix add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of these are cpufreq changes, which has been a recurring
pattern for a few recent cycles.
Those changes include new hardware support (AN7583 SoC support in the
airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq
driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support
in the ti cpufreq driver), DT bindings and Rust code updates, cleanups
of the core and governors, and multiple driver fixes and cleanups.
Beyond that, there are hibernation fixes (some remaining 6.16 cycle
fallout and an issue related to hybrid suspend in the amdgpu driver),
cleanups of the PM core code, runtime PM documentation update, cpuidle
and power capping cleanups, and tooling updates.
Specifics:
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange freq
QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to
simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas
Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq
core to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md
Sadre Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix
supported hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya
Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not
sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi
devfreq driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance
in the mtk-cci devfreq driver probe and remove a redundant
condition from an if () statement in that driver (Dan Carpenter,
Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf()
in cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle
driver and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that
funtion easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API
(Brian Norris)
- Clear power.must_resume in noirq suspend error path to avoid
resuming a dependant device under a suspended parent or supplier
(Rafael Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode
and combine exit paths in power_down() to avoid code duplication
(Rafael Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that
do bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)"
* tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
PM: runtime: Documentation: ABI: Document time units for *_time
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names
cpufreq: Replace pointer subtraction with iteration macro
cpuidle: Fail cpuidle device registration if there is one already
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"New driver:
- Analog Devices I3C Controller
Subsystem:
- fix big-endian FIFO transfers
- fix default I2C adapter timeout value
Drivers:
- dw: shutdown support
- mipi-i3c-hci: Intel Wildcat Lake-U support, IOMMU support
- renesas: RZ/V2H(P) and RZ/V2N support"
* tag 'i3c/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (22 commits)
i3c: fix big-endian FIFO transfers
i3c: master: adi: fix number of bytes written to fifo
i3c: Remove superfluous FIXME
i3c: master: adi: fix header location
i3c: dw: Add shutdown support to dw_i3c_master driver
i3c: renesas: Simplify return statement in 'renesas_i3c_daa'
dt-bindings: i3c: renesas,i3c: Add RZ/V2H(P) and RZ/V2N support
i3c: master: svc: Recycle unused IBI slot
i3c: master: svc: Use manual response for IBI events
i3c: master: Add driver for Analog Devices I3C Controller IP
dt-bindings: i3c: Add adi-i3c-master
i3c: Fix default I2C adapter timeout value
i3c: mipi-i3c-hci: Convert remaining DBG() prints to dev_dbg()
i3c: mipi-i3c-hci: Remove function enter DBG() printouts
i3c: mipi-i3c-hci: Uniform ring number printouts
i3c: mipi-i3c-hci: Remove nonexistent ring interrupt
i3c: mipi-i3c-hci: Change interrupt status prints to dev_dbg()
i3c: mipi-i3c-hci: Use own DMA bounce buffer management for I2C transfers
i3c: mipi-i3c-hci: Use physical device pointer with DMA API
i3c: mipi-i3c-hci: Use core helpers for DMA mapping and bounce buffering
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly DT bindings additions this time because Andi was super busy and
I also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates:
- add the compatible for Giantec GT24C256C to the device-tree
bindings"
* tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
i2c: i801: Add support for Intel Wildcat Lake-U
dt-bindings: i2c: i2c-mt65xx: Add MediaTek MT8196/6991 compatibles
i2c: designware: Add disabling clocks when probe fails
i2c: designware: Fix clock issue when PM is disabled
i2c: busses: Fix some spelling errors
i2c: mux: Simplify boolean assignment in i2c_mux_alloc
i2c: designware: use dev_err_probe() when probing platform device
i2c: designware: convert to dev_err_probe() on request IRQ error
i2c: spacemit: ensure SDA is released after bus reset
i2c: spacemit: check SDA instead of SCL after bus reset
i2c: spacemit: disable SDA glitch fix to avoid restart delay
i2c: spacemit: remove stop function to avoid bus error
i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails
i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD
i2c: boardinfo: Annotate code used in init phase only
dt-bindings: i2c: i2c-mt65xx: Document MediaTek MT6878 I2C
dt-bindings: i2c: samsung,s3c2410-i2c: Drop S3C2410
i2c: s3c2410: Drop S3C2410 OF support
dt-bindings: i2c: spacemit,k1-i2c: Minor whitespace cleanup in example
dt-bindings: i2c: exynos5: add samsung,exynos8890-hsi2c compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
|
|
Pull IPMI updates from Corey Minyard:
"Bug fixes and enhancements for IPMI
This fixes a number of small bugs, but has some more major changes:
- Loongson-2K BMC support is added. This is an MFD device and is
dependent on the changes coming from that tree.
The way the driver handles BMCs that have become non-functional has
been completely redone. A number of changes in the past have
attempted to handle various issues around this, but nothing has
been very good. After working with some people on this, the code
has been reworked to disable the driver and fail all pending
operations if the BMC becomes non functional. It will retry the BMC
once a second to see if it's back up"
* tag 'for-linus-6.18-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Add Loongson-2K BMC support
ipmi:si: Gracefully handle if the BMC is non-functional
ipmi: Rename "user_data" to "recv_msg" in an SMI message
ipmi: Allow an SMI sender to return an error
ipmi:si: Move flags get start to its own function
ipmi:si: Merge some if statements
ipmi: Set a timer for maintenance mode
ipmi: Add a maintenance mode sysfs file
ipmi: Disable sysfs access and requests in maintenance mode
ipmi: Differentiate between reset and firmware update in maintenance
dt-bindings: ipmi: aspeed,ast2400-kcs-bmc: Add missing "clocks" property
ipmi: Rework user message limit handling
Revert "ipmi: fix msg stack when IPMI is disconnected"
ipmi:msghandler:Change seq_lock to a mutex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new properties for battery internal resistance and state of
health
Power-supply drivers:
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr:
- add charge control support
- add support for state of health and internal resistance
- max77705_charger:
- big driver cleanup
- add support for setting charge current
- misc minor fixes and cleanups"
* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: qcom_battmgr: handle charging state change notifications
power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
power: supply: max77705_charger: rework interrupts
power: supply: max77705_charger: add writable properties
power: supply: max77705_charger: return error when config fails
power: supply: max77705_charger: use regfields for config registers
power: supply: max77705_charger: refactoring: rename charger to chg
mfd: max77705: max77705_charger: move active discharge setting to mfd parent
power: supply: max77976_charger: fix constant current reporting
power: supply: qcom_battmgr: Add charge control support
dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
power: supply: qcom_battmgr: Add state_of_health property
power: supply: qcom_battmgr: Add resistance power supply property
power: supply: core: Add state_of_health power supply property
power: supply: core: Add resistance power supply property
power: supply: rx51: remove redundant condition checks
dt-bindings: power: supply: bq24190: document charge enable pin
dt-bindings: power: supply: bq27xxx: document optional interrupt
power: supply: intel_dc_ti_battery: Drop no longer relevant comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"This submission is a mix of new features, a number of fixes, some
clean-up/refactoring and a few Device Tree binding updates. The most
significant changes include new device support for the IS31FL3236A and
QNAP's status LEDs, a number of fixes for the Qualcomm flash, LP55xx,
MAX77705 and QNAP MCU drivers, along with some generic LED consumer
binding documentation and unification.
New Support & Features:
- Add support for the IS31FL3236A LED driver, including an optional
22kHz PWM frequency setting.
- Add support for the red and green status LEDs on QNAP MCU devices.
Improvements & Fixes:
- Fix an issue in the MAX77705 driver where an error value was
assigned but not returned.
- Correctly update the torch current clamp setting in the Qualcomm
flash LED driver to prevent unexpected clamping.
- Add a separate register map for the PMI8998 to the Qualcomm flash
LED driver to handle its unique register layout.
- Fix the state numbering for the USB LED in the QNAP MCU driver to
avoid command conflicts.
- Correct the memory programming address calculation for non-paged
devices like the LP5562 in the LP55xx driver.
- Add Device Tree support to the generic led_get() function, allowing
LEDs to be looked up by name.
Cleanups & Refactoring:
- Fix a spelling mistake in the Kconfig help text for the BD2606MVV
driver.
- Use devm_mutex_init() in the IS31FL319x driver to simplify code.
Device Tree Bindings Updates:
- Drop the redundant '-db' suffix from the IS31FL319x binding.
- Introduce generic LED consumer bindings for referencing LEDs via
phandles.
- Unify the 'leds' property across several bindings to use the new
generic consumer binding.
- Convert the AMS AS3645A LED controller binding to the DT schema
format"
* tag 'leds-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: as3645: Convert to DT schema
leds: led-class: Add Device Tree support to led_get()
dt-bindings: leds: Unify 'leds' property
dt-bindings: leds: Add generic LED consumer documentation
leds: is31fl319x: Use devm_mutex_init()
leds: leds-lp55xx: Use correct address for memory programming
dt-bindings: leds: issi,is31fl319x: Drop 'db' suffix duplicating dtschema
leds: qnap-mcu: Add support for the red and green status LEDs
leds: qnap-mcu: Fix state numbering for USB LED
leds: flash: leds-qcom-flash: Add a separate register map for PMI8998
leds: flash: leds-qcom-flash: Update torch current clamp setting
leds: max77705: Function return instead of variable assignment
leds: Kconfig: Fix spelling mistake "limitiation" -> "limitation"
leds: leds-is31fl32xx: Add support for is31fl3236a
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data
corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning
sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the
unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and
RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm:
- Add support for tuning for SDR50 mode for SD cards
- Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few
Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection"
* tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (77 commits)
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8890
mmc: select REGMAP_MMIO with MMC_LOONGSON2
mmc: add COMPILE_TEST to multiple drivers
mmc: core: Improve RPMB frame handling code
mmc: core: Fix variable shadowing in mmc_route_rpmb_frames()
mmc: core: Parse and use the new max-sd-hs-hz DT property
dt-bindings: mmc: controller: Add max-sd-hs-hz property
mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card
dt-bindings: mmc: sdhci-msm: Document the Lemans compatible
mmc: sh_mmcif: Remove dummy PM resume callback
dt-bindings: mmc: sdhci-pxa: Add minItems to pinctrl-names
mmc: sdio: Drop dev_pm_domain_detach() call
mmc: dw_mmc-rockchip: use modern PM macros
mmc: dw_mmc-pci: use modern PM macros
mmc: dw_mmc-k3: use modern PM macros
mmc: dw_mmc: exynos: use modern PM macros
mmc: via-sdmmc: use modern PM macros
mmc: sdhci-msm: use modern PM macros
mmc: mtk-sd: use modern PM macros
mmc: wmt-sdmmc: use modern PM macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- amlogic: Add support for S6/S7/S7D power-domains controller
- imx: Add support for i.MX91 power-domains
- marvell: Add support for PXA1908 power-domains
- mediatek:
- Add support for modem power sequence
- Add support for RTFF Hardware in MT8196/MT6991
- qcom: Align power-domain definitions for rpmpd
- rockchip: Default to use power-domain support
- thead: Create auxiliary device along with a corresponding reset
driver
- ti: Synchronize on/off state with HW-state for ti-sci power-domains
* tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: thead: Fix error pointer vs NULL bug in th1520_pd_reboot_init()
pmdomain: thead: create auxiliary device for rebooting
driver: reset: th1520-aon: add driver for poweroff/reboot via AON FW
pmdomain: mediatek: airoha: convert from round_rate() to determine_rate()
pmdomain: rockchip: enable ROCKCHIP_PM_DOMAINS with ARCH_ROCKCHIP
pmdomain: marvell: Add PXA1908 power domains
dt-bindings: clock: marvell,pxa1908: Add syscon compatible to apmu
pmdomain: ti-sci: Set PD on/off state according to the HW state
pmdomain: amlogic: Add support for S6 S7 S7D power domains controller
dt-bindings: power: add Amlogic S6 S7 S7D power domains
pmdomain: mediatek: Convert all SoCs to new style regmap retrieval
pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991
pmdomain: mediatek: Add support for modem power sequences
pmdomain: mediatek: Move ctl sequences out of power_on/off functions
pmdomain: mediatek: Handle SoCs with inverted SRAM power-down bits
pmdomain: mediatek: Refactor bus protection regmaps retrieval
dt-bindings: power: mediatek: Document access-controllers property
pmdomain: remove unneeded 'fast_io' parameter in regmap_config
pmdomain: imx93-blk-ctrl: mask DSI and PXP PD domain register on i.MX91
pmdomain: imx93-blk-ctrl: use ARRAY_SIZE() instead of hardcode number
...
|
