summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2016-04-19mtd: brcmnand: Add support for v6.2 controllersFlorian Fainelli1-0/+1
Document and match the brcm,brcmnand-v6.2 compatible string, the controller has a register layout identical to the v6.0 version and supports prefetch. Update the command shift logic to account for v6.2 controller which are the first ones to use a shift of 0 (6.1 used a shift of 24). Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-19mtd: nand: document the NAND controller/NAND chip DT representationBoris Brezillon1-1/+36
Standardize the NAND controller/NAND chip DT representation. Now, all new NAND controller drivers should comply with this representation, even if they are only supporting a single NAND chip. Existing drivers can keep support for the old representation (where only the NAND chip was described), but are encouraged to also support the new one. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
2016-04-15mtd: nand: omap2: Implement NAND ready using gpiolibRoger Quadros1-0/+2
The GPMC WAIT pin status are now available over gpiolib. Update the omap_dev_ready() function to use gpio instead of directly accessing GPMC register space. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Support WAIT pin edge interruptsRoger Quadros1-1/+4
OMAPs can have 2 to 4 WAITPINs that can be used as edge triggered interrupts if not used for memory wait state insertion. Support these interrupts via the gpmc IRQ domain. The gpmc IRQ domain interrupt map is: 0 - NAND_fifoevent 1 - NAND_termcount 2 - GPMC_WAIT0 edge 3 - GPMC_WAIT1 edge, and so on Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Support general purpose input for WAITPINsRoger Quadros1-0/+6
OMAPs can have 2 to 4 WAITPINs that can be used as general purpose input if not used for memory wait state insertion. The first user will be the OMAP NAND chip to get the NAND read/busy status using gpiolib. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Move device tree binding to correct locationRoger Quadros1-0/+0
omap-gpmc.c is a memory controller so move the binding to the right place. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15mtd: nand: omap: Update DT binding documentationRoger Quadros1-4/+13
Add compatible id and interrupts. The NAND interrupts are provided by the GPMC controller node. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Implement IRQ domain for NAND IRQsRoger Quadros1-0/+8
GPMC provides 2 interrupts for NAND use. i.e. fifoevent and termcount. Use IRQ domain for this. NAND device tree node can then get the necessary interrupts by using gpmc as the interrupt parent. Legacy boot uses gpmc_get_client_irq to get the NAND interrupts from the GPMC IRQ domain. Get rid of custom bitmasks and use IRQ domain for that as well. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com>
2016-03-26Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+3
Pull more SCSI updates from James Bottomley: "The only new stuff which missed the first pull request is an update to the UFS driver. The rest is an assortment of bug fixes and minor tweaks which appeared recently (some are fixes for recent code and some are stuff spotted recently by the checkers or the new gcc-6 compiler [most of Arnd's stuff])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi_common: do not clobber fixed sense information scsi: ufs: select CONFIG_NLS scsi: fc: use get/put_unaligned64 for wwn access fnic: move printk()s outside of the critical code section. qla2xxx: avoid maybe_uninitialized warning megaraid_sas: add missing curly braces in ioctl handler lpfc: fix misleading indentation scsi_transport_sas: add 'scsi_target_id' sysfs attribute scsi_dh_alua: uninitialized variable in alua_check_vpd() scsi: ufs-qcom: add printouts of testbus debug registers scsi: ufs-qcom: enable/disable the device ref clock scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startup scsi: ufs: add device quirk delay before putting UFS rails in LPM scsi: ufs: fix leakage during link off state scsi: ufs: tune UniPro parameters to optimize hibern8 exit time scsi: ufs: handle non spec compliant bkops behaviour by device scsi: ufs: add retry for query descriptors scsi: ufs: add error recovery after DL NAC error scsi: ufs: make error handling bit faster scsi: ufs: disable vccq if it's not needed by UFS device ...
2016-03-25Merge tag 'pm+acpi-4.6-rc1-2' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "The second batch of power management and ACPI updates for v4.6. Included are fixups on top of the previous PM/ACPI pull request and other material that didn't make into it but still should go into 4.6. Among other things, there's a fix for an intel_pstate driver issue uncovered by recent cpufreq changes, a workaround for a boot hang on Skylake-H related to the handling of deep C-states by the platform and a PCI/ACPI fix for the handling of IO port resources on non-x86 architectures plus some new device IDs and similar. Specifics: - Fix for an intel_pstate driver issue related to the handling of MSR updates uncovered by the recent cpufreq rework (Rafael Wysocki). - cpufreq core cleanups related to starting governors and frequency synchronization during resume from system suspend and a locking fix for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran). - acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang, Michael Neuling, Richard Cochran, Shilpasri Bhat). - intel_idle driver update preventing some Skylake-H systems from hanging during initialization by disabling deep C-states mishandled by the platform in the problematic configurations (Len Brown). - Intel Xeon Phi Processor x200 support for intel_idle (Dasaratharaman Chandramouli). - cpuidle menu governor updates to make it always honor PM QoS latency constraints (and prevent C1 from being used as the fallback C-state on x86 when they are set below its exit latency) and to restore the previous behavior to fall back to C1 if the next timer event is set far enough in the future that was changed in 4.4 which led to an energy consumption regression (Rik van Riel, Rafael Wysocki). - New device ID for a future AMD UART controller in the ACPI driver for AMD SoCs (Wang Hongcheng). - Rockchip rk3399 support for the rockchip-io-domain adaptive voltage scaling (AVS) driver (David Wu). - ACPI PCI resources management fix for the handling of IO space resources on architectures where the IO space is memory mapped (IA64 and ARM64) broken by the introduction of common ACPI resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi). - Fix for the ACPI backend of the generic device properties API to make it parse non-device (data node only) children of an ACPI device correctly (Irina Tirdea). - Fixes for the handling of global suspend flags (introduced in 4.4) during hibernation and resume from it (Lukas Wunner). - Support for obtaining configuration information from Device Trees in the PM clocks framework (Jon Hunter). - ACPI _DSM helper code and devfreq framework cleanups (Colin Ian King, Geert Uytterhoeven)" * tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) PM / AVS: rockchip-io: add io selectors and supplies for rk3399 intel_idle: Support for Intel Xeon Phi Processor x200 Product Family intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled ACPI / PM: Runtime resume devices when waking from hibernate PM / sleep: Clear pm_suspend_global_flags upon hibernate cpufreq: governor: Always schedule work on the CPU running update cpufreq: Always update current frequency before startig governor cpufreq: Introduce cpufreq_update_current_freq() cpufreq: Introduce cpufreq_start_governor() cpufreq: powernv: Add sysfs attributes to show throttle stats cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static PCI: ACPI: IA64: fix IO port generic range check ACPI / util: cast data to u64 before shifting to fix sign extension cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path cpuidle: menu: Fall back to polling if next timer event is near cpufreq: acpi-cpufreq: Clean up hot plug notifier callback intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts cpufreq: Make cpufreq_quick_get() safe to call ACPI / property: fix data node parsing in acpi_get_next_subnode() ACPI / APD: Add device HID for future AMD UART controller ...
2016-03-25Merge tag 'rtc-4.6-2' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull more RTC updates from Alexandre Belloni: "A second pull request for v4.6 with a few fixesi before -rc1. The new features for abx80x actually make the RTC behave correctly. Drivers: - abx80x: handle both XT and RC oscillators, XT failure bit and autocalibration - m41t80: avoid out of range year values - rv8803: workaround an i2c HW issue" * tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: abx80x: handle the oscillator failure bit rtc: abx80x: handle autocalibration rtc: rv8803: workaround i2c HW issue rtc: mcp795: add devicetree support rtc: asm9260: remove incorrect __init/__exit annotations rtc: m41t80: avoid out of range year values rtc: s3c: Don't print an error on probe deferral rtc: rv3029: stop mentioning rv3029c2
2016-03-25Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtdLinus Torvalds3-14/+108
Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ...
2016-03-25Merge tag 'armsoc-dt2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull more ARM DT changes from Arnd Bergmann: "Here are some final updates for ARM SoC specific dts files: - The i.MX changes were sent relatively late, and had a dependency on the clk tree, so I delayed that a bit. Support for the new i.MX6qp SoC and a couple of new boards is added in this branch. - Uniphier renames a few files to match the final product names that were decided by the company, kudos to the kernel developer(s) for getting support upstream before the product release. Also two boards are added. The patches were posted early enough and nice overall, but we forgot to apply them and decided to give it some more time in linux-next - at91 has two small bug fixes" * tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator ARM: dts: uniphier: add pinmux node for I2C ch4 ARM: dts: uniphier: add @{address} to EEPROM node ARM: dts: uniphier: add PH1-Pro4 Sanji board support ARM: dts: uniphier: add PH1-Pro4 Ace board support ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board ARM: dts: uniphier: add reference clock nodes ARM: dts: uniphier: rework UniPhier System Bus nodes ARM: dts: uniphier: factor out ranges property of support card arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20 ARM: dts: imx53-qsb: Fix gpio button polarity ARM: dts: vfxxx: Add DAC node for Vybrid SoC ARM: dts: imx6q: add missing links between ipu2 and mipi dsi ARM: dts: imx: Add support for Advantech/GE B850v3 ARM: dts: imx: Add support for Advantech/GE B650v3 ARM: dts: imx: Add support for Advantech/GE B450v3 ARM: dts: imx: Add support for Advantech/GE Bx50v3 ARM: dts: imx: Add Advantech BA-16 Qseven module ...
2016-03-24Merge branch 'next' of ↵Linus Torvalds2-3/+58
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Fix a regression where bogus trip points on some Lenovo laptops start to screw up thermal control after commit 81ad4276b505 ("Thermal: initialize thermal zone device correctly"). On these Lenovo laptops, a bogus passive trip point is reported, which is 0 degree Celsius. Without commit 81ad4276b505, thermal zone fails to set cooling devices to proper cooling state, which is a bug. But with commit 81ad4276b505 applied, the processors are always throttled on these Lenovo laptops because the current temperature is always higher than the passive trip point. Fix things to ignore such bogus trip points. (Zhang Rui) - Introduce Mediatek thermal driver. (Sascha Hauer) - Introduce devm_ versions of OF thermal sensor register API. (Laxman Dewangan) - Changes in Kconfigs to allow compile test on UM arch. (Krzysztof Kozlowski) - Introduce Skylake support in intel_pch_thermal driver. (Srinivas Pandruvada) - Several small fixes on Rockchip, TI-SoC, Tegra, RCar, and Exynos thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (26 commits) Thermal: Ignore invalid trip points thermal: trace: migrating thermal traces to use TRACE_DEFINE_ENUM() macros thermal: intel_pch_thermal: Enable Skylake PCH thermal thermal: doc: Add details of devm_thermal_zone_of_sensor_{register,unregister} thermal: of-thermal: Add devm version of thermal_zone_of_sensor_register thermal: doc: Add details of thermal_zone_of_sensor_{register,unregister} thermal: exynos: Defer probe if vtmu is present but not registered thermal: exynos: Use devm_regulator_get_optional() for vtmu thermal: exynos: List vtmu-supply as optional property in DT binding thermal: exynos: Print a message about exceeded number of supported trip-points thermal: exynos: Document number of supported trip-points thermal: exynos: Document compatible for Exynos5433 TMU thermal: mtk: allow compile testing on UM thermal: tegra_soctherm: fix sign bit of temperature thermal: Fix build error of missing devm_ioremap_resource on UM thermal: ti-soc-thermal: clean up the error handling a bit thermal: rcar: Use ARCH_RENESAS thermal: rcar_thermal: don't open code of_device_get_match_data() thermal: db8500_cpufreq_cooling: Compile with COMPILE_TEST thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399 ...
2016-03-24Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-5/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A small set of fixes for the usual ARM/SOC irqchip drivers - A set of fixes for mbigen to handle multiple devices in a hardware module proper - A cleanup for the mbigen config option which was pointlessly user configurable. - A cleanup for tegra replacing open coded functionality by the proper core function The config cleanup touches arch/arm64/Kconfig.platforms to select the irq chip for the related platform" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden option ARM64: Kconfig: Select mbigen interrupt controller on Hisilicon platform irqchip/mbigen: Handle multiple device nodes in a mbigen module irqchip/mbigen: Adjust DT bindings to handle multiple devices in a module irqchip/tegra: Switch to use irq_domain_free_irqs_common
2016-03-24PM / AVS: rockchip-io: add io selectors and supplies for rk3399David Wu1-0/+11
This adds the necessary data for handling io voltage domains on the rk3399. As interesting tidbit, the rk3399 contains two separate iodomain areas. One in the regular General Register Files (GRF) and one in PMUGRF in the pmu power domain. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-23Merge branch 'mailbox-for-next' of ↵Linus Torvalds1-0/+50
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull more mailbox updates from Jassi Brar: "Device tree bindings and driver for TI's Message-Manager controller. Due to some last minute cosmetic changes, the driver was not included in the first pull request, otherwise the driver has been reviewed twice" * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Introduce TI message manager driver Documentation: dt: mailbox: Add TI Message Manager
2016-03-23Merge tag 'clk-for-linus' of ↵Linus Torvalds7-2/+109
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The clk changes for this release cycle are mostly dominated by new device support in terms of LoC, but there has been some cleanup in the core as well as the usual minor clk additions to various drivers. Core: - parent tracking has been simplified - CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started - of_clk_init() doesn't consider disabled DT nodes anymore - clk_unregister() had an error path bug squashed - of_clk_get_parent_count() has been fixed to only return unsigned ints - HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone New Drivers: - NXP LPC18xx creg - QCOM IPQ4019 GCC - TI dm814x ADPLL - i.MX6QP Updates: - Cyngus audio clks found on Broadcom iProc devices - Non-critical fixes for BCM2385 PLLs - Samsung exynos5433 updates for clk id errors, HDMI support, suspend/resume simplifications - USB, CAN, LVDS, and FCP clks on shmobile devices - sunxi got support for more clks on new SoCs and went through a minor refactoring/rewrite to use a simpler factor clk construct - rockchip added some more clk ids and added suport for fraction dividers - QCOM GDSCs in msm8996 - A new devm helper to make adding custom actions simpler (acked by Greg)" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits) clk: bcm2835: fix check of error code returned by devm_ioremap_resource() clk: renesas: div6: use RENESAS for #define clk: renesas: Rename header file renesas.h clk: max77{686,802}: Remove CLK_IS_ROOT clk: versatile: Remove CLK_IS_ROOT clk: sunxi: Remove use of variable length array clk: fixed-rate: Remove CLK_IS_ROOT clk: qcom: Remove CLK_IS_ROOT doc: dt: add documentation for lpc1850-creg-clk driver clk: add lpc18xx creg clk driver clk: lpc32xx: fix compilation warning clk: xgene: Add missing parenthesis when clearing divider value clk: mb86s7x: Remove CLK_IS_ROOT clk: x86: Remove clkdev.h and clk.h includes clk: x86: Remove CLK_IS_ROOT clk: mvebu: Remove CLK_IS_ROOT clk: renesas: move drivers to renesas directory clk: si5{14,351,70}: Remove CLK_IS_ROOT clk: scpi: Remove CLK_IS_ROOT clk: s2mps11: Remove CLK_IS_ROOT ...
2016-03-22Merge branch 'i2c/for-next' of ↵Linus Torvalds5-3/+141
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Mostly usual driver updates and improvements. The changelog should give an idea. Standing out is the i2c-qup driver with lots of new capabilities and we also have now an i2c-demuxer. I'd especially like to welcome Peter Rosin as the i2c-mux maintainer. He has an interesting series for muxes in the queue and agreed to look after this part of the subsystem. Thank you, Peter, and welcome again! The octeon changes were applied pretty recently before the merge window. I am aware. They are the first (and relatively simple) patches of a larger overhaul to this driver. In case something goes wrong with them, they are easy to fix (or revert). The advantage I see is that they are out of the way, and I can concentrate on the next block of patches. I really would like to apply the overhaul in smaller batches to avoid regressions. And waiting a cycle for the introductory patches seemed too much of a delay for me" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits) i2c: octeon: Support I2C_M_RECV_LEN i2c: octeon: Cleanup resource allocation code i2c: octeon: Cleanup i2c-octeon driver MAINTAINERS: add Peter Rosin as i2c mux maintainer dt-bindings: i2c: Spelling s/propoerty/property/ i2c: immediately mark ourselves as registered i2c: i801: sort IDs alphabetically MAINTAINERS: Mika and me are designated reviewers for I2C DESIGNWARE i2c: octeon: Cleanup kerneldoc comments i2c: do not use internal data from driver core i2c: cadence: Fix the kernel-doc warnings i2c: imx: remove extra spaces. i2c: rcar: don't open code of_device_get_match_data() i2c: qup: Fix fifo handling after adding V2 support i2c: xiic: Implement power management i2c: piix4: Pre-shift the port number i2c: piix4: Always use the same type for port i2c: piix4: Support alternative port selection register i2c: tegra: don't open code of_device_get_match_data() i2c: riic, sh_mobile, rcar: Use ARCH_RENESAS ...
2016-03-22Merge tag 'iommu-updates-v4.6' of ↵Linus Torvalds5-14/+140
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - updates for the Exynos IOMMU driver to make use of default domains and to add support for the SYSMMU v5 - new Mediatek IOMMU driver - support for the ARMv7 short descriptor format in the io-pgtable code - default domain support for the ARM SMMU - couple of other small fixes all over the place * tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/ipmmu-vmsa: Add r8a7795 DT binding iommu/mediatek: Check for NULL instead of IS_ERR() iommu/io-pgtable-armv7s: Fix kmem_cache_alloc() flags iommu/mediatek: Fix handling of of_count_phandle_with_args result iommu/dma: Fix NEED_SG_DMA_LENGTH dependency iommu/mediatek: Mark PM functions as __maybe_unused iommu/mediatek: Select ARM_DMA_USE_IOMMU iommu/exynos: Use proper readl/writel register interface iommu/exynos: Pointers are nto physical addresses dts: mt8173: Add iommu/smi nodes for mt8173 iommu/mediatek: Add mt8173 IOMMU driver memory: mediatek: Add SMI driver dt-bindings: mediatek: Add smi dts binding dt-bindings: iommu: Add binding for mediatek IOMMU iommu/ipmmu-vmsa: Use ARCH_RENESAS iommu/exynos: Support multiple attach_device calls iommu/exynos: Add Maintainers entry for Exynos SYSMMU driver iommu/exynos: Add support for v5 SYSMMU iommu/exynos: Update device tree documentation iommu/exynos: Add support for SYSMMU controller with bogus version reg ...
2016-03-22rtc: mcp795: add devicetree supportEmil Bartczak1-0/+11
Add device tree support to the rtc-mcp795 driver. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-22Merge tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds4-3/+52
Pull MMC updates from Ulf Hansson: "MMC core: - Fix ABI regression of MMC BLK ioctl - Remove the unused MMC_DATA_STREAM flag - Enable asynchronous system PM for the host device - Minor fixes and clean-ups SDHCI host: Throughout the years, the numbers of SDHCI variants have increased and so has also the numbers of SDHCI callbacks/quirks. The purpose of these callbacks/quirks were to enable SDHCI to deal with variant specific requirements, but unfortunate this method didn't scale. Instead we have ended up with a mess. Not only did the code become suboptimal but also highly fragile. Lately many discussions of how to move forward with SDHCI has taken place at the MMC mailing list. Step by step, we aim to turn SDHCI's common code into a set of library functions. This will enable for optimizations and allow some of the existing callbacks and quirks to be removed, which also should help to make the code less fragile. Therefore I am also really pleased to announce that Adrian Hunter (Intel) has volunteered to step in as the maintainer for SDHCI. Future wise, I hope the community around SDHCI will continue to grow and that this release cycle can be the starting point of moving SDHCI into a better shape. As a matter of fact, already in this cycle the re-factoring has begun, but of course there are also fixes and new features included. Some highlights: - sdhci-iproc: Add support for Broadcom's BCM2835 eMMC IP - sdhci-acpi: Add support for QCOM controllers - sdhci-pic32: Add new SDHCI variant for PIC32MZDA Other hosts: - atmel-mci: Fix a NULL pointer dereference - mediatek: Add SD write-protect support - mmc_spi: Fix card detect in GPIO case - tmio/sdhi: Add r8a7795 support - tmio/sdhi: Some fixes and clean-ups - dw_mmc: Add HW reset support - dw_mmc: Some fixes and clean-ups - sunxi: Add support for MMC DDR52 mode" * tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc: (123 commits) mmc: sdhci-of-at91: fix wake-up issue when using runtime pm mmc: sdhci-pci: Do not set DMA mask in enable_dma() mmc: sdhci-acpi: Remove enable_dma() hook mmc: sdhci: Set DMA mask when adding host mmc: block: fix ABI regression of mmc_blk_ioctl mmc: atmel-mci: Check pdata for NULL before dereferencing it at DMA config mmc: core: remove redundant memset of sdio_read_cccr mmc: core: remove redundant memset of mmc_decode_cid mmc: of_mmc_spi: fix unused warning mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan mmc: sdhci-of-arasan: fix missing sdhci_pltfm_free for err handling mmc: sdhci-of-arasan: remove disable clk_ahb from sdhci_arasan_resume Documentation: bindings: add description of phy for sdhci-of-arasan mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout mmc: mmci: Remove unnecessary header file mmc: sdhci-acpi: add QCOM controllers mmc: tegra: implement memcomp pad calibration mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch mmc: mediatek: Change signal voltage error to dev_dbg() mmc: sh_mmcif, tmio: Use ARCH_RENESAS ...
2016-03-21Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds9-13/+170
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.6 kernel. Overall the coolest thing here for me is the nouveau maxwell signed firmware support from NVidia, it's taken a long while to extract this from them. I also wish the ARM vendors just designed one set of display IP, ARM display block proliferation is definitely increasing. Core: - drm_event cleanups - Internal API cleanup making mode_fixup optional. - Apple GMUX vga switcheroo support. - DP AUX testing interface Panel: - Refactoring of DSI core for use over more transports. New driver: - ARM hdlcd driver i915: - FBC/PSR (framebuffer compression, panel self refresh) enabled by default. - Ongoing atomic display support work - Ongoing runtime PM work - Pixel clock limit checks - VBT DSI description support - GEM fixes - GuC firmware scheduler enhancements amdkfd: - Deferred probing fixes to avoid make file or link ordering. amdgpu/radeon: - ACP support for i2s audio support. - Command Submission/GPU scheduler/GPUVM optimisations - Initial GPU reset support for amdgpu vmwgfx: - Support for DX10 gen mipmaps - Pageflipping and other fixes. exynos: - Exynos5420 SoC support for FIMD - Exynos5422 SoC support for MIPI-DSI nouveau: - GM20x secure boot support - adds acceleration for Maxwell GPUs. - GM200 support - GM20B clock driver support - Power sensors work etnaviv: - Correctness fixes for GPU cache flushing - Better support for i.MX6 systems. imx-drm: - VBlank IRQ support - Fence support - OF endpoint support msm: - HDMI support for 8996 (snapdragon 820) - Adreno 430 support - Timestamp queries support virtio-gpu: - Fixes for Android support. rockchip: - Add support for Innosilicion HDMI rcar-du: - Support for 4 crtcs - R8A7795 support - RCar Gen 3 support omapdrm: - HDMI interlace output support - dma-buf import support - Refactoring to remove a lot of legacy code. tilcdc: - Rewrite of pageflipping code - dma-buf support - pinctrl support vc4: - HDMI modesetting bug fixes - Significant 3D performance improvement. fsl-dcu (FreeScale): - Lots of fixes tegra: - Two small fixes sti: - Atomic support for planes - Improved HDMI support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits) drm/amdgpu: release_pages requires linux/pagemap.h drm/sti: restore mode_fixup callback drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release ...
2016-03-21Merge tag 'arm64-perf' of ↵Linus Torvalds2-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm[64] perf updates from Will Deacon: "I have another mixed bag of ARM-related perf patches here. It's about 25% CPU and 75% interconnect, but with drivers/bus/ languishing without an obvious maintainer or tree, Olof and I agreed to keep all of these PMU patches together. I suspect a whole load of code from drivers/bus/arm-* can be moved under drivers/perf/, so that's on the radar for the future. Summary: - Initial support for ARMv8.1 CPU PMUs - Support for the CPU PMU in Cavium ThunderX - CPU PMU support for systems running 32-bit Linux in secure mode - Support for the system PMU in ARM CCI-550 (Cache Coherent Interconnect)" * tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (26 commits) drivers/perf: arm_pmu: avoid NULL dereference when not using devicetree arm64: perf: Extend ARMV8_EVTYPE_MASK to include PMCR.LC arm-cci: remove unused variable arm-cci: don't return value from void function arm-cci: make private functions static arm-cci: CoreLink CCI-550 PMU driver arm-cci500: Rearrange PMU driver for code sharing with CCI-550 PMU arm-cci: CCI-500: Work around PMU counter writes arm-cci: Provide hook for writing to PMU counters arm-cci: Add helper to enable PMU without synchornising counters arm-cci: Add routines to save/restore all counters arm-cci: Get the status of a counter arm-cci: write_counter: Remove redundant check arm-cci: Delay PMU counter writes to pmu::pmu_enable arm-cci: Refactor CCI PMU enable/disable methods arm-cci: Group writes to counter arm-cci: fix handling cpumask_any_but return value arm-cci: simplify sysfs attr handling drivers/perf: arm_pmu: implement CPU_PM notifier arm64: dts: Add Cavium ThunderX specific PMU ...
2016-03-21Documentation: dt: mailbox: Add TI Message ManagerNishanth Menon1-0/+50
Message Manager is a hardware block used to communicate with various processor systems within certain Texas Instrument's Keystone generation SoCs. This hardware engine is used to transfer messages from various compute entities(or processors) within the SoC. It is designed to be self contained without needing software initialization for operation. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-03-21Merge branches 'arm/rockchip', 'arm/exynos', 'arm/smmu', 'arm/mediatek', ↵Joerg Roedel5-14/+140
'arm/io-pgtable', 'arm/renesas' and 'core' into next
2016-03-21irqchip/mbigen: Adjust DT bindings to handle multiple devices in a moduleMaJun1-5/+17
A mbigen hardware module can contain more than one device node. These device nodes contain the same register definition. mbigen_dev1:intc_dev1 { ... reg = <0x0 0xc0080000 0x0 0x10000>; ... }; mbigen_dev2:intc_dev2 { ... reg = <0x0 0xc0080000 0x0 0x10000>; ... }; In this case both devices try to request the same resource resulting in a resource conflict. To address this problem the devices need to be subnodes of the mbigen hardware module, which then contains the unique register space. [ tglx: Massaged changelog ] Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ma Jun <majun258@huawei.com> Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: Catalin.Marinas@arm.com Cc: guohanjun@huawei.com Cc: Will.Deacon@arm.com Cc: huxinwei@huawei.com Cc: lizefan@huawei.com Cc: dingtianhong@huawei.com Cc: zhaojunhua@hisilicon.com Cc: liguozhu@hisilicon.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20160203111602.GA1234@leverpostej Link: http://lkml.kernel.org/r/1458203641-17172-2-git-send-email-majun258@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-21Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+81
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons: - Rockchip rk3368 gains power domain support - Small updates for the ARM spmi driver - The Atmel PMC driver saw a larger rework, touching both arch/arm/mach-at91 and drivers/clk/at91 - All reset controller driver changes alway get merged through arm-soc, though this time the largest change is the addition of a MIPS pistachio reset driver - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) bus: imx-weim: Take the 'status' property value into account clk: at91: remove useless includes clk: at91: pmc: remove useless capacities handling clk: at91: pmc: drop at91_pmc_base usb: gadget: atmel: access the PMC using regmap ARM: at91: remove useless includes and function prototypes ARM: at91: pm: move idle functions to pm.c ARM: at91: pm: find and remap the pmc ARM: at91: pm: simply call at91_pm_init clk: at91: pmc: move pmc structures to C file clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe clk: at91: remove IRQ handling and use polling clk: at91: make use of syscon/regmap internally clk: at91: make use of syscon to share PMC registers in several drivers hwmon: (scpi) add energy meter support firmware: arm_scpi: add support for 64-bit sensor values firmware: arm_scpi: decrease Tx timeout to 20ms firmware: arm_scpi: fix send_message and sensor_get_value for big-endian reset: sti: Make reset_control_ops const reset: zynq: Make reset_control_ops const ...
2016-03-21Merge tag 'armsoc-dt64' of ↵Linus Torvalds22-0/+77
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "The arm64 device tree changes make up an increasing portion of the overall changes, so they are kept separate from the 32-bit devicetree changes and from the other arm64 updates. Newly added SoCs and boards are: - 96Boards Husky board - AMD Overdrive board - Amlogic S905 SoC and related Tronsmart boxes - Annapurna Labs Alpine family and development board - Broadcom Vulcan servers - Broadcom Northstar 2 SoC - Marvell Armada 3700 family and development board - Qualcomm MSM8996 SoC Additional devices are enabled for existing platforms from Applied Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a couple of other updates for Rockchip, Xilinx and NXP/Freescale" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits) ARM64: dts: amlogic: Add Tronsmart Vega S95 configs Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards ARM64: dts: Prepare configs for Amlogic Meson GXBaby Documentation: devicetree: amlogic: Document Meson GXBaby devicetree: bindings: Add vendor prefix for Tronsmart arm64: dts: qcom: Fix MPP's function used for LED control arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi arm64: dts: add the Alpine v2 EVP arm64: dts: marvell: re-order Device Tree nodes for Armada AP806 arm64: dts: marvell: update Armada AP806 clock description arm64: dts: marvell: add Device Tree files for Armada 7K/8K arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform. arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver arm64: dts: apm: mailbox device tree node for APM X-Gene platform. arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2 arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2 ...
2016-03-21Merge tag 'armsoc-dt' of ↵Linus Torvalds15-5/+185
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, plus a couple of related 64-bit updates: New SoC support: - Allwinner A83T - Axis Artpec-6 SoC - Mediatek MT7623 SoC - TI Keystone K2G SoC - ST Microelectronics stm32f469 New board or machine support: - ARM Juno R2 - Buffalo Linkstation LS-QVL and LS-GL - Cubietruck plus - D-Link DIR-885L - DT support for ARM RealView PB1176 and PB11MPCore - Google Nexus 7 - Homlet v2 - Itead Ibox - Lamobo R1 - LG Optimus Black - Logicpd dm3730 - Raspberry Pi Model A Other changes include - Lots of updates for Qualcomm APQ8064, MSM8974 and others - Improved support for Nokia N900 and other OMAP machines - Common clk support for lpc32xx - HDLCD display on ARM - Improved stm32f429 support - Improved Renesas device support, r8a779x and others - Lots of Rockchip updates - Samsung cleanups - ADC support for Atmel SAMA5D2 - BCM2835 (Raspberry Pi) improvements - Broadcom Northstar Plus enhancements - OMAP GPMC rework - Several improvements for Atmel SAMA5D2 / Xplained - Global change to remove inofficial "arm,amba-bus" compatible string" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits) ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" ARM: dts: artpec: dual-license on artpec6.dtsi ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT arm64: dts: juno/vexpress: fix node name unit-address presence warnings arm64: dts: foundation-v8: add SBSA Generic Watchdog device node ARM: dts: at91: sama5d2 Xplained: add leds node ARM: dts: at91: sama5d2 Xplained: add user push button ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host ARM: dts: stm32f429: Enable Ethernet on Eval board ARM: dts: omap3-sniper: TWL4030 keypad support Revert "ARM: dts: DRA7: Add dt nodes for PWMSS" ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND ARM: dts: dm814x: dra62x: Fix NAND device nodes ARM: dts: stm32f429: Add Ethernet support ARM: dts: stm32f429: Add system config bank node ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes ARM: dts: at91: sama5d2: add dma properties to UART nodes ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs ...
2016-03-21Merge tag 'armsoc-arm64' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit changes from Arnd Bergmann: "Here's our branch of ARM64 contents for this merge window, now containing all ARM64 changes other than device tree files. - Various new platforms get added: * Allwinner A64 SoC * Annapurna Labs Alpine SoCs * Broadcom Vulcan * Marvell Armada 3700 SoCs * Amlogic S905 - Various defconfig changes to enable platform specific drivers This branch includes the clk git tree to resolve a build-time dependency" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) arm64: defconfig: Increase MMC_BLOCK_MINORS to 16 arm64: defconfig: Add Qualcomm sdhci and restart functionality ARM64: Enable Amlogic Meson GXBaby platform arm64: defconfig: Enable Samsung MFD and related configs arm64: alpine: select the Alpine MSI controller driver arm64: defconfig: enable the Alpine family arm64: add Alpine SoC family arm64: defconfig: Enable exynos thermal config arm64: add defconfig options for Allwinner SoCs arm64: defconfig: Enable DesignWare APB GPIO controller arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS clk: samsung: Don't build ARMv8 clock drivers on ARMv7 MAINTAINERS: Add entry for Broadcom Vulcan SoC arm64: cputype info for Broadcom Vulcan arm64: Broadcom Vulcan support arm64: defconfig: Add Broadcom Vulcan to defconfig arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support Documentation: arm: add Marvell Armada 7K and 8K families Documentation: arm: add link to Armada 38x Functional Spec ...
2016-03-21Merge tag 'armsoc-soc' of ↵Linus Torvalds2-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ...
2016-03-20Merge branch 'mailbox-for-next' of ↵Linus Torvalds4-1/+142
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox bindings and drivers for * APM X-Gene * Hisilicon Hi6220 * Rockchip RK3368 platforms - minor fixes to the above three drivers. - misc cleanups of mailbox-test driver. * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: rockchip: avoid 64-bit division mailbox: rockchip: Add Rockchip mailbox driver dt-bindings: rockchip-mailbox: Add mailbox controller document on Rockchip SoCs mailbox/xgene-slimpro: Checking for IS_ERR instead of NULL mailbox: Hi6220: add mailbox driver dt-bindings: mailbox: Document Hi6220 mailbox driver mailbox: mailbox-test: add support for separate tx/rx buffer with single channel mailbox: mailbox-test: use print_hex_dump_bytes to allow dynamic printk mailbox: mailbox-test: fix the compatible string mailbox: mailbox-test: rename driver as generic test driver Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation mailbox: Add support for APM X-Gene platform mailbox driver
2016-03-20Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-0/+31
Pull watchdog updates from Wim Van Sebroeck: - new drivers for: NI 903x/913x watchdog driver, WinSystems EBC-C384 watchdog timer and ARM SBSA watchdog driver - Support for NCT6102D devices - Improvements of the generic watchdog framework (improve restart handler, make set_timeout optional, introduce infrastructure triggered keepalives, ... - improvements on the pnx4008 watchdog driver - several smaller fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (28 commits) watchdog: Ensure that wdd is not dereferenced if NULL watchdog: imx2: Convert to use infrastructure triggered keepalives watchdog: dw_wdt: Convert to use watchdog infrastructure watchdog: Add support for minimum time between heartbeats watchdog: Make stop function optional watchdog: Introduce WDOG_HW_RUNNING flag watchdog: Introduce hardware maximum heartbeat in watchdog core watchdog: Make set_timeout function optional arm: lpc32xx: remove restart handler arm: lpc32xx: phy3250 remove restart hook watchdog: pnx4008: restart: support "cmd" from userspace watchdog: pnx4008: add support for soft reset watchdog: pnx4008: add restart handler watchdog: pnx4008: update logging during power-on watchdog: tangox_wdt: test clock rate to avoid division by 0 watchdog: atlas7_wdt: test clock rate to avoid division by 0 watchdog: s3c2410_wdt: Add max and min timeout values Watchdog: introduce ARM SBSA watchdog driver Documentation: add sbsa-gwdt driver documentation watchdog: Add watchdog timer support for the WinSystems EBC-C384 ...
2016-03-20Merge tag 'tag-sh-for-4.6' of git://git.libc.org/linux-shLinus Torvalds1-0/+13
Pull arch/sh updates from Rich Felker: "This includes minor cleanups, a fix for a crash that likely affects all sh models with MMU, and introduction of a framework for boards described by device tree, which sets the stage for future J2 support" * tag 'tag-sh-for-4.6' of git://git.libc.org/linux-sh: sched/preempt, sh: kmap_coherent relies on disabled preemption sh: add SMP method selection to device tree pseudo-board sh: add device tree support and generic board using device tree sh: remove arch-specific localtimer and use generic one sh: make MMU-specific SMP code conditional on CONFIG_MMU sh: provide unified syscall trap compatible with all SH models sh: New gcc support sh: Disable trace for kernel uncompressing. sh: Use generic clkdev.h header
2016-03-20Merge tag 'powerpc-4.6-1' of ↵Linus Torvalds2-0/+103
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...
2016-03-20Merge tag 'devicetree-for-4.6' of ↵Linus Torvalds5-2/+47
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - new tool 'dtx_diff' to diff DT files - sync kernel's dtc/libfdt to current dtc repo master - fix for reserved memory regions located in highmem - document standard unit suffixes for DT properties - various DT binding doc updates * tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add vendor prefix for eGalax_eMPIA Technology Inc Input: ads7846: Add description how to use internal reference (ADS7846) ARM: realview: add EB syscon variants to bindings devicetree: bindings: ARM: Use "uV" for micro-volt serial: fsl-imx-uart: Fix typo in fsl,dte-mode description of: add 'const' for of_property_*_string*() parameter '*np' of/unittest: fix infinite loop in of_unittest_destroy_tracked_overlays() of: alloc anywhere from memblock if range not specified kbuild: Allow using host dtc instead of kernel's copy of: resolver: Add missing of_node_get and of_node_put of: Add United Radiant Technology Corporation vendor prefix dt/bindings: add documentation on standard property unit suffixes scripts/dtc: Update to upstream commit b06e55c88b9b ARM: boot: Add an implementation of strnlen for libfdt scripts/dtc: dtx_diff - add info to error message dtc: create tool to diff device trees
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds17-31/+440
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-19Merge branch 'for-4.6' of ↵Linus Torvalds2-0/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - ahci grew runtime power management support so that the controller can be turned off if no devices are attached. - sata_via isn't dead yet. It got hotplug support and more refined workaround for certain WD drives. - Misc cleanups. There's a merge from for-4.5-fixes to avoid confusing conflicts in ahci PCI ID table. * 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci_xgene: dereferencing uninitialized pointer in probe AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs ata: sata_rcar: Use ARCH_RENESAS sata_via: Implement hotplug for VT6421 sata_via: Apply WD workaround only when needed on VT6421 ahci: Add runtime PM support for the host controller ahci: Add functions to manage runtime PM of AHCI ports ahci: Convert driver to use modern PM hooks ahci: Cache host controller version scsi: Drop runtime PM usage count after host is added scsi: Set request queue runtime PM status back to active on resume block: Add blk_set_runtime_active() ata: ahci_mvebu: add support for Armada 3700 variant libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show() libata: support AHCI on OCTEON platform
2016-03-18Merge tag 'mfd-for-linus-4.6' of ↵Linus Torvalds7-7/+281
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) New Device Support: - Supply device PCI IDs for Intel Broxton Fix-ups: - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu Bug Fixes: - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss" * tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: intel-lpss: Pass I2C configuration via properties on BXT mfd: imx6sx: Add PCIe register definitions for iomuxc gpr mfd: ipaq-micro: Use __maybe_unused to hide pm functions mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Export OF module alias information mfd: max77686: Allow driver to be built as a module mfd: stmpe: Add the proper PWM resources mfd: tps65090: Set regmap config reg counts properly mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled mfd: as3711: Set regmap config reg counts properly mfd: rc5t583: Set regmap config reg counts properly gpio: tps65086: Add GPO driver for the TPS65086 PMIC mfd: mt6397: Add platform device ID table mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists mfd: mt6397: Add MT6323 support to MT6397 driver mfd: mt6397: Add support for different Slave types mfd: mt6397: int_con and int_status may vary in location dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists mfd: Add documentation for ACT8945A DT bindings ...
2016-03-18Merge tag 'sound-4.6-rc1' of ↵Linus Torvalds16-3/+554
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "After a heavy storm by syzkaller in 4.5 cycle, we have relatively few changes in the core at this time while a lot of changes are found in the driver side, unsurprisingly. Below are some highlights: ALSA core: - A few more hardening in ALSA timer codes - An extension of sequencer API for advertising the card / pid - Small fixes in compress-offload and jack layers HD-audio: - Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming DP-MST support - Lots of code refactoring for sharing with ASoC SKL driver - Regression fixes for Intel HDMI/DP - Fixups for CX20724 codec, Lenovo AiO USB-audio: - Add quirk_alias option to make quirk debugging easier - Fixes for possible Oops by malformed firmware Firewire: - Add support for FW-1804 in tascam driver - Improvements / changes in card registration, multi stream handling, etc for DICE - Lots of code refactoring ASoC: - Enhancements of still ongoing topology API - Lots of commits for Intel Skylake support including HDMI support - A few Intel Atom driver updates for recent devices - Lots of improvements to the Renesas drivers - Capture support for Qualcomm drivers - Support for TI DaVinci DRA7xxx devices - New machine drivers for Freescale systems with Cirrus CODECs, Mediatek systems with RT5650 CODECs - New CPU drivers for Allwinner S/PDIF controllers - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514" * tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (291 commits) ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation ALSA: mixart: silence an uninitialized variable warning ALSA: usb-audio: Add sanity checks for endpoint accesses ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk() ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk() ALSA: hda - Limit i915 HDMI binding only for HSW and later ALSA: hda - Fix unconditional GPIO toggle via automute ALSA: mixart: silence unitialized variable warnings ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41. ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda ASoC: rsnd: add simplified module explanation ASoC: hdac_hdmi: Add broxton device ID ASoC: Intel: Bxtn: Add Broxton PCI ID ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops ASoC: Intel: add dmabuffer to common sst_dsp ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core ASoC: Intel: Skylake: Fix whitepsace issues ASoC: Intel: Skylake: Move module id defines ...
2016-03-18of: Add vendor prefix for eGalax_eMPIA Technology IncFabio Estevam1-0/+1
eGalax_eMPIA Technology Inc (EETI) is a company specialized in touchscreen controller solutions. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-18dt-bindings: i2c: Spelling s/propoerty/property/Geert Uytterhoeven3-3/+3
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-03-18Merge tag 'staging-4.6-rc1' of ↵Linus Torvalds12-1/+209
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ...
2016-03-18Merge branch 'for-linus' of ↵Linus Torvalds11-1/+376
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The most notable item is addition of support for Synaptics RMI4 protocol which is native protocol for all current Synaptics devices (touchscreens, touchpads). In later releases we'll switch devices using HID and PS/2 protocol emulation to RMI4. You will also get: - BYD PS/2 touchpad protocol support for psmouse - MELFAS MIP4 Touchscreen driver - rotary encoder was moved away from legacy platform data and to generic device properties API, devm_* API, and can now handle encoders using more than 2 GPIOs - Cypress touchpad driver was switched to devm_* API and device properties - other assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define props Input: synaptics-rmi4 - using logical instead of bitwise AND Input: powermate - fix oops with malicious USB descriptors Input: snvs_pwrkey - fix returned value check of syscon_regmap_lookup_by_phandle() MAINTAINERS: add devicetree bindings to Input Drivers section Input: synaptics-rmi4 - add device tree support to the SPI transport driver Input: synaptics-rmi4 - add SPI transport driver Input: synaptics-rmi4 - add support for F30 Input: synaptics-rmi4 - add support for F12 Input: synaptics-rmi4 - add device tree support for 2d sensors and F11 Input: synaptics-rmi4 - add support for 2D sensors and F11 Input: synaptics-rmi4 - add device tree support for RMI4 I2C devices Input: synaptics-rmi4 - add I2C transport driver Input: synaptics-rmi4 - add support for Synaptics RMI4 devices Input: ad7879 - add device tree support Input: ad7879 - fix default x/y axis assignment Input: ad7879 - move header to platform_data directory Input: ts4800 - add hardware dependency Input: cyapa - fix for losing events during device power transitions Input: sh_keysc - remove dependency on SUPERH ...
2016-03-18Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds6-12/+147
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
2016-03-18Merge tag 'usb-4.6-rc1' of ↵Linus Torvalds7-15/+115
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.6-rc1. The normal mess is here, gadget and xhci fixes and updates, and lots of other driver updates and cleanups as well. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits) USB: core: let USB device know device node usb: devio: Add ioctl to disallow detaching kernel USB drivers. usb: gadget: f_acm: Fix configfs attr name usb: udc: lpc32xx: remove USB PLL and USB OTG clock management usb: udc: lpc32xx: remove direct access to clock controller registers usb: udc: lpc32xx: switch to clock prepare/unprepare model usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable() usb: gadget: renesas_usb3: Use ARCH_RENESAS usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma() usb: dwc2: Add support for Lantiq ARX and XRX SoCs usb: phy: generic: Handle late registration of gadget usb: gadget: bdc_udc: fix race condition in bdc_udc_exit() usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config usb: dwc2: Move host-specific core functions into hcd.c usb: dwc2: Move register save and restore functions usb: dwc2: Use kmem_cache_free() usb: dwc2: host: If using uframe scheduler, end splits better usb: dwc2: host: Totally redo the microframe scheduler usb: dwc2: host: Properly set even/odd frame usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call ...
2016-03-17Merge tag 'tty-4.6-rc1' of ↵Linus Torvalds4-0/+50
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ...
2016-03-17Merge tag 'char-misc-4.6-rc1' of ↵Linus Torvalds4-0/+106
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big char/misc driver update for 4.6-rc1. The majority of the patches here is hwtracing and some new mic drivers, but there's a lot of other driver updates as well. Full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits) goldfish: Fix build error of missing ioremap on UM nvmem: mediatek: Fix later provider initialization nvmem: imx-ocotp: Fix return value of imx_ocotp_read nvmem: Fix dependencies for !HAS_IOMEM archs char: genrtc: replace blacklist with whitelist drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular drivers: char: mem: fix IS_ERROR_VALUE usage char: xillybus: Fix internal data structure initialization pch_phub: return -ENODATA if ROM can't be mapped Drivers: hv: vmbus: Support kexec on ws2012 r2 and above Drivers: hv: vmbus: Support handling messages on multiple CPUs Drivers: hv: utils: Remove util transport handler from list if registration fails Drivers: hv: util: Pass the channel information during the init call Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload() Drivers: hv: vmbus: remove code duplication in message handling Drivers: hv: vmbus: avoid wait_for_completion() on crash Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages misc: at24: replace memory_accessor with nvmem_device_read eeprom: 93xx46: extend driver to plug into the NVMEM framework eeprom: at25: extend driver to plug into the NVMEM framework ...
2016-03-17Merge tag 'driver-core-4.6-rc1' of ↵Linus Torvalds1-36/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Just a few patches this time around for the 4.6-rc1 merge window. Largest is a new firmware driver, but there are some other updates to the driver core in here as well, the shortlog has the details. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "driver-core: platform: probe of-devices only using list of compatibles" firmware: qemu config needs I/O ports firmware: qemu_fw_cfg.c: fix typo FW_CFG_DATA_OFF driver-core: platform: probe of-devices only using list of compatibles driver-core: platform: fix typo in documentation for multi-driver helper component: remove impossible condition drivers: dma-coherent: simplify dma_init_coherent_memory return value devicetree: update documentation for fw_cfg ARM bindings firmware: create directory hierarchy for sysfs fw_cfg entries firmware: introduce sysfs driver for QEMU's fw_cfg device kobject: export kset_find_obj() for module use driver core: bus: use to_subsys_private and to_device_private_bus driver core: bus: use list_for_each_entry* debugfs: Add stub function for debugfs_create_automount(). kernfs: make kernfs_walk_ns() use kernfs_pr_cont_buf[]
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 23:54:23 +0300