summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2014-01-20Merge branch 'for-next' into for-linusTakashi Iwai13-3/+421
2014-01-16Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', ↵Mark Brown4-2/+58
'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai
2014-01-13ASoC: tlv320aic3x: Add tlv320aic32x4 as compatibleMarkus Pargmann1-0/+1
Add tlv320aic32x4 to the compatible list in the binding documentation. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-10ASoC: fsl_esai: Add ESAI CPU DAI driverNicolin Chen1-0/+50
This patch implements a device-tree-only CPU DAI driver for Freescale ESAI controller that supports: - 12 channels playback and 8 channels record. [ Some of the inner transmitters and receivers are sharing same group of pins. So the maxmium 12 output or 8 input channels are only valid if there is no pin conflict occurring to it. ] - Independent (asynchronous mode) or shared (synchronous mode) transmit and receive sections with separate or shared internal/external clocks and frame syncs, operating in Master or Slave mode. [ Current ALSA seems not to allow CPU DAI drivers to configure DAI format separately for PLAYBACK and CAPTURE. So this first version only supports the case that uses the same DAI format for both directions. ] - Various DAI formats: I2S, Left-Justified, Right-Justified, DSP-A and DSP-B. - Programmable word length (8, 16, 20 or 24bits) - Flexible selection between system clock or external oscillator as input clock source, programmable internal clock divider and frame sync generation. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09ASoC: fsl-ssi doc: Add list of supported compatiblesMarkus Pargmann1-1/+6
There is no list of compatibles that are supported. This patch adds a list of compatibles to the documentation. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: simple-card: keep the property's name the same patternXiubo Li1-1/+1
Even though we might not have rigor rule for the simple card property names, according to the existing ones, they are all in a same pattern: [simple-audio-card,]XXX; Rename simple-audio-routing to simple-audio-card,routing, and make the simple card's properties has one unified name. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06Merge tag 'samsung-clk-fixes' of ↵Mike Turquette1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-fixes Samsung Clock fixes for 3.13-rc7 * Several patches fixing up incorrectly defined register addresses and bitfield offsets that could lead to undefined operation when accessing respective registers or bitfields. 1) clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks 2a) clk: samsung: exynos5250: Fix ACP gate register offset 2b) clk: samsung: exynos5250: Add MDMA0 clocks 2c) ARM: dts: exynos5250: Fix MDMA0 clock number 3) clk: samsung: exynos4: Correct SRC_MFC register All three issues have been present since Exynos5250 and Exynos4 clock drivers were added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock framework") and e062b571777f5 ("clk: exynos4: register clocks using common clock framework") respectively. * Patch to fix automatic disabling of Exynos5250 sysreg clock that could cause undefined operation of several peripherals, such as USB, I2C, MIPI or display block. 4) clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock Present since Exynos5250 clock drivers was added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock framework"). * Patch fixing compilation warning in clk-exynos-audss driver when CONFIG_PM_SLEEP is disabled. 5) clk: exynos: File scope reg_save array should depend on PM_SLEEP Present since the driver was added by commit 1241ef94ccc3 ("clk: samsung: register audio subsystem clocks using common clock framework").
2014-01-02Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', ↵Mark Brown10-4/+298
'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next
2014-01-02Merge remote-tracking branch 'asoc/topic/dt' into asoc-nextMark Brown1-0/+68
2013-12-31ASoC: hdmi-codec: Add devicetree binding with documentationJyri Sarha1-0/+17
Signed-off-by: Jyri Sarha <jsarha@ti.com> cc: bcousson@baylibre.com Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: simple-card: Add DAPM routes parse from device treeXiubo Li1-2/+11
Parses a simple DAPM route table from device tree. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-30clk: samsung: exynos5250: Add MDMA0 clocksAbhilash Kesavan1-0/+2
Adds gate clock for MDMA0 on Exynos5250 SoC. This is needed to ensure that the clock is enabled when MDMA0 is used on systems on which firmware gates the clockby default. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-18ASoC: fsl-sai: Add device tree bindings for Freescale SAI.Xiubo Li1-0/+40
This adds the Document for Freescale SAI driver under Documentation/devicetree/bindings/sound/. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-1/+5
Pull networking fixes from David Miller: 1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't figure out why it breaks things. 2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it was basically doing "x == x", from Dave Jones. 3) Freescale FEC driver was DMA mapping the wrong number of bytes, from Sebastian Siewior. 4) Blackhole and prohibit routes in ipv6 were not doing the right thing because their ->input and ->output methods were not being assigned correctly. Now they behave properly like their ipv4 counterparts. From Kamala R. 5) Several drivers advertise the NETIF_F_FRAGLIST capability, but really do not support this feature and will send garbage packets if fed fraglist SKBs. From Eric Dumazet. 6) Fix long standing user triggerable BUG_ON over loopback in RDS protocol stack, from Venkat Venkatsubra. 7) Several not so common code paths can potentially try to invoke packet scheduler actions that might be NULL without checking. Shore things up by either 1) defining a method as mandatory and erroring on registration if that method is NULL 2) defininig a method as optional and the registration function hooks up a default implementation when NULL is seen. From Jamal Hadi Salim. 8) Fix fragment detection in xen-natback driver, from Paul Durrant. 9) Kill dangling enter_memory_pressure method in cg_proto ops, from Eric W Biederman. 10) SKBs that traverse namespaces should have their local_df cleared, from Hannes Frederic Sowa. 11) IOCB file position is not being updated by macvtap_aio_read() and tun_chr_aio_read(). From Zhi Yong Wu. 12) Don't free virtio_net netdev before releasing all of the NAPI instances. From Andrey Vagin. 13) Procfs entry leak in xt_hashlimit, from Sergey Popovich. 14) IPv6 routes that are no cached routes should not count against the garbage collection limits. We had this almost right, but were missing handling addrconf generated routes properly. From Hannes Frederic Sowa. 15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL route info when they are called, from Stefan Tomanek. 16) TUN and MACVTAP have had truncated packet signalling for some time, fix from Jason Wang. 17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet. 18) xen-netback does not interpret the NAPI budget properly for TX work, fix from Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits) igb: Fix for issue where values could be too high for udelay function. i40e: fix null dereference xen-netback: fix gso_prefix check net: make neigh_priv_len in struct net_device 16bit instead of 8bit drivers: net: cpsw: fix for cpsw crash when build as modules xen-netback: napi: don't prematurely request a tx event xen-netback: napi: fix abuse of budget sch_tbf: use do_div() for 64-bit divide udp: ipv4: must add synchronization in udp_sk_rx_dst_set() net:fec: remove duplicate lines in comment about errata ERR006358 Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature" 8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature xen-netback: make sure skb linear area covers checksum field net: smc91x: Fix device tree based configuration so it's usable udp: ipv4: fix potential use after free in udp_v4_early_demux() macvtap: signal truncated packets tun: unbreak truncated packet signalling net: sched: htb: fix the calculation of quantum net: sched: tbf: fix the calculation of max_size micrel: add support for KSZ8041RNLI ...
2013-12-12net: smc91x: Fix device tree based configuration so it's usableTony Lindgren1-0/+4
Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10ASoC: davinci-mcasp: Support for fck reparentingPeter Ujfalusi1-1/+2
Optional DT property to specify the desired parent clock for the McASP fck clock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-10ASoC: davinci-mcasp: Support for McASP version found in DRA7xxPeter Ujfalusi1-0/+1
The IP in DRA7xx is similar to the IP found in TI81xxAM3xxx/AM4xxx type of SoCs but it is is integrated with sDMA instead of eDMA. The suitable pcm driver for DRA7xx is the omap-pcm driver which is using dmaengine. In the driver we can configure both dma related structures used for eDMA and sDMA. The only thing we need to make sure that we set the correct dma_data at startup with snd_soc_dai_set_dma_data() Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-10ASoC: davinci: kconfig: Prepare for AM43xx supportPeter Ujfalusi1-1/+1
AM43xx have the same McASP IP as AM33xx and both platform uses eDMA. Modify the Kconfig so it will be possible to add audio support for AM43xx based boards later. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09dt: Add bindings documentation for the ADI AXI-SPDIF audio controllerLars-Peter Clausen1-0/+30
This patch adds the devicetree documentation for the ADI AXI-SPDIF audio controller. The controller has: * One set of memory mapped register * Two clocks, one for the memory mapped register interface, one used as the audio reference clock * A DMA interface for the transmit data Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09dt: Add bindings documentation for the ADI AXI-I2S controllerLars-Peter Clausen1-0/+31
This patch adds the devicetree documentation for the ADI AXI-SPDIF audio controller. The controller has: * One set of memory mapped register * Two clocks, one for the memory mapped register interface, one used as the audio reference clock * One DMA interface each for the transmit and receive data Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-06Merge tag 'dt-fixes-for-3.13' of ↵Linus Torvalds11-36/+58
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Various DT binding documentation updates - Add Kumar Gala and remove Stephen Warren as DT binding maintainers * tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt: binding: reword PowerPC 8xxx GPIO documentation ARM: tegra: delete nvidia,tegra20-spi.txt binding hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv) of: add vendor prefix for GMT clk: exynos: Fix typos in DT bindings documentation of: Add vendor prefix for LG Corporation Documentation: net: fsl-fec.txt: Add phy-supply entry ARM: dts: doc: Document missing binding for omap5-mpu dt-bindings: add ARMv8 PMU binding MAINTAINERS: remove swarren from DT bindings MAINTAINERS: Add Kumar to Device Tree Binding maintainers group
2013-12-06net: davinci_emac: Fix platform data handling and make usable for am3517Tony Lindgren1-1/+1
When booted with device tree, we may still have platform data passed as auxdata. For am3517 this is needed for passing the interrupt_enable and interrupt_disable callbacks that access the omap system control module registers. These callback functions will eventually go away when we have a separate system control module driver. Some of the things that are currently passed as platform data we don't need to set up as device tree properties as they are always the same on am3517. So let's use a new compatible flag for those so we can get those from the device tree match data. Also note that we need to fix setting of phy_dev to NULL instead of an empty string as the code later on uses that to find the first phy on the mdio bus. This seems to have been caused by 5d69e0076a72 (net: davinci_emac: switch to new mdio). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05ASoC: max98090: add DT binding document for MAX98090 CODECStephen Warren1-0/+43
This binding mainly serves to document the list of input and output pins that may be used in a sound card's audio routing table. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-05ASoC: tegra: add tegra+MAX98090 machine driverStephen Warren1-0/+51
Initially, this binding and driver only describe/support playback to headphones and speakers, and capture from the external microphone, with GPIO-based jack detection for the headphone jack only. This driver is useful for the Venice2 board. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-0/+54
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another batch of fixes for ARM SoCs for 3.13. The diffstat is large, mostly because of: - Another set of fixes to fix regressions caused by moving OMAP from board files to DT. Tony thinks this was the last major set of fixes, with maybe just a few small patches to follow. - More fixes for Marvell platforms, most dealing with misdescribed PCIe hardware, i.e. incorrect number of busses on some SoCs, etc. The line delta adds up due to various ranges moving around when this is fixed. But there's also: - Some smaller tweaks to defconfigs to make more boards bootable in my test setup for better coverage. - There are also a few other smaller fixes, a short series for at91, a couple of reverts for ux500, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk arm: socfpga: Enable ARM_TWD for socfpga ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support ARM: multi_v7_defconfig: enable network for BeagleBone Black ARM: dts: Fix the name of supplies for smsc911x shared by OMAP ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm ARM: dts: omap3-beagle: Add omap-twl4030 audio support ARM: dts: omap4-sdp: Fix pin muxing for wl12xx ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM ARM: at91: add usart3 alias to dtsi ARM: at91: sama5d3: reduce TWI internal clock frequency mmc: omap: Fix I2C dependency and make driver usable with device tree mmc: omap: Fix DMA configuration to not rely on device id ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi ARM: dts: AM33XX IGEP0033: add USB support ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support ARM: dts: AM33XX BASE0033: add pinmux and user led support ...
2013-12-04Merge tag 'omap-for-v3.13/fixes-against-rc1-take2' of ↵Olof Johansson1-0/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Some omap related fixes that have come up with people moving to device tree only based booting for omap2+. The series contains a handful of fixes for the igep boards as they were one of the first omap3 boards to jump over completely to device tree based booting. So these can be considered regressions compared to booting igep in legacy mode with board files in v3.12. Also included are few other device tree vs legacy booting regressions: - yet more missing omap3 .dtsi entries that have showed up booting various boards with device tree only - n900 eMMC device tree fix - fixes for beagle USB EHCI - two fixes to make omap2420 MMC work As we're moving omap2+ to be device tree only for v3.14, I'd like to have v3.13 work equally well for legacy based booting and device tree based booting. So there will be likely few more device tree related booting patches trickling in. This series also includes a regression fix for the omap timer posted mode that may wrongly stay on from the bootloader for some SoCs. * tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: mmc: omap: Fix I2C dependency and make driver usable with device tree mmc: omap: Fix DMA configuration to not rely on device id ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi ARM: dts: AM33XX IGEP0033: add USB support ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support ARM: dts: AM33XX BASE0033: add pinmux and user led support ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display ARM: dts: omap3-igep0020: Add pinmuxing for DVI output ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO ARM: dts: omap3-igep: Fix bus-width for mmc1 ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus ARM: OMAP2+: Disable POSTED mode for errata i103 and i767 ARM: OMAP2+: Fix eMMC on n900 with device tree ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig ARM: OMAP2+: Fix more missing data for omap3.dtsi file Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03dt: binding: reword PowerPC 8xxx GPIO documentationGerhard Sittig1-26/+40
re-format and re-word the device tree binding documentation for MPC8xxx and compatibles, reference the common document for interrupt controllers and remove outdated duplicate SoC specific information Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <Pawel.Moll@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <devicetree@vger.kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03ARM: tegra: delete nvidia,tegra20-spi.txt bindingStephen Warren1-5/+0
This binding shouldn't exist; Tegra20 has two forms of SPI controller that are documented separately in nvidia,tegra20-sflash.txt and nvidia,tegra20-slink.txt. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)Chanwoo Choi1-1/+1
This patch fix typo of property name from 'pullup-uV' to 'pullup-uv'. The ntc_thermistor.c use 'pullup-uv' when parsing dt data. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03of: add vendor prefix for GMTWei Ni1-0/+1
Adding Global Mixed-mode Technology Inc. to the list of devicetree vendor prefixes. Signed-off-by: Wei Ni <wni@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03clk: exynos: Fix typos in DT bindings documentationLaurent Pinchart4-4/+4
s/comptible/compatible/ Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03of: Add vendor prefix for LG CorporationThierry Reding1-0/+1
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03Documentation: net: fsl-fec.txt: Add phy-supply entryFabio Estevam1-0/+2
phy-supply is an optional property of the fec driver, so add it to the binding documentation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03ARM: dts: doc: Document missing binding for omap5-mpuSricharan R1-0/+8
The binding and support for omap5-mpu which has a cortex-a15 smp core, gic and integrated L2 cache has been existing for sometime. So Documenting the missing binding here. Cc: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03dt-bindings: add ARMv8 PMU bindingRob Herring1-0/+1
Add missing "arm,armv8-pmuv3" compatible property for ARMv8 PMU. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
2013-12-02ASoC: simple-card: add Device Tree supportKuninori Morimoto1-0/+68
Support for loading the simple-card module via DeviceTree. It requests CPU/CODEC information. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-28ASoC: dt: binding: sound cs42l52 driverBrian Austin1-0/+46
Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27mmc: omap: Fix I2C dependency and make driver usable with device treeTony Lindgren1-0/+54
Some features can be configured by the companion I2C chips, which may not be available at the probe time. Fix the issue by returning -EPROBE_DEFER when the MMC controller slots are not configured. While at it, let's also add minimal device tree support so omap24xx platforms can use this driver without legacy mode since we claim to support device tree for mach-omap2 based systems. Although adding the minimal device tree support is not strictly a fix, it does remove one of the last blockers for dropping a bunch of legacy platform data for mach-omap2. Cc: linux-mmc@vger.kernel.org Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Mostly bugfixes and a few small code removals. Worth pointing out is: - A handful of more fixes to get DT enablement working properly on OMAP, finding new breakage of things that don't work quite right yet without the traditional board files. I expect a bit more of this to come in this release as people test on their hardware. - Implementation of power_down_finish() on vexpress, to make kexec work and to stop the MCPM core to produce a warning (the warning was new to 3.13-rc1). - A handful of minor fixes for various platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcm2835: add missing #xxx-cells to I2C nodes ARM: dts: Add max77686 RTC interrupt to cros5250-common ARM: vexpress/TC2: Implement MCPM power_down_finish() ARM: tegra: Provide dummy powergate implementation ARM: omap: fix warning with LPAE build ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: imx6qdl: disable spdif "rxtx5" clock option ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
2013-11-26Merge tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of ↵Olof Johansson1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more fixes for issues found booting older omaps using device tree. Also few randconfig build fixes and removal of some dead code for omap4 as it no longer has legacy platform data based booting support. * tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
2013-11-25ASoC: Add support for BCM2835Florian Meier1-0/+25
This driver adds support for digital audio (I2S) for the BCM2835 SoC that is used by the Raspberry Pi. External audio codecs can be connected to the Raspberry Pi via P5 header. It relies on cyclic DMA engine support for BCM2835. Signed-off-by: Florian Meier <florian.meier@koalo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-0/+17
Pull crypto update from Herbert Xu: - Made x86 ablk_helper generic for ARM - Phase out chainiv in favour of eseqiv (affects IPsec) - Fixed aes-cbc IV corruption on s390 - Added constant-time crypto_memneq which replaces memcmp - Fixed aes-ctr in omap-aes - Added OMAP3 ROM RNG support - Add PRNG support for MSM SoC's - Add and use Job Ring API in caam - Misc fixes [ NOTE! This pull request was sent within the merge window, but Herbert has some questionable email sending setup that makes him public enemy #1 as far as gmail is concerned. So most of his emails seem to be trapped by gmail as spam, resulting in me not seeing them. - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits) crypto: s390 - Fix aes-cbc IV corruption crypto: omap-aes - Fix CTR mode counter length crypto: omap-sham - Add missing modalias padata: make the sequence counter an atomic_t crypto: caam - Modify the interface layers to use JR API's crypto: caam - Add API's to allocate/free Job Rings crypto: caam - Add Platform driver for Job Ring hwrng: msm - Add PRNG support for MSM SoC's ARM: DT: msm: Add Qualcomm's PRNG driver binding document crypto: skcipher - Use eseqiv even on UP machines crypto: talitos - Simplify key parsing crypto: picoxcell - Simplify and harden key parsing crypto: ixp4xx - Simplify and harden key parsing crypto: authencesn - Simplify key parsing crypto: authenc - Export key parsing helper function crypto: mv_cesa: remove deprecated IRQF_DISABLED hwrng: OMAP3 ROM Random Number Generator support crypto: sha256_ssse3 - also test for BMI2 crypto: mv_cesa - Remove redundant of_match_ptr crypto: sahara - Remove redundant of_match_ptr ...
2013-11-22Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - acpi_power_meter: Fix return value check from call to acpi_bus_get_device - nct6775: Fix/improve NCT6791 support - lm75: Add support for GMT G751 * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN hwmon: (nct6775) Monitor additional temperature registers hwmon: (lm75) Add support for GMT G751 chip
2013-11-22Merge branch 'for-linus2' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "In this patchset, we finally get an SELinux update, with Paul Moore taking over as maintainer of that code. Also a significant update for the Keys subsystem, as well as maintenance updates to Smack, IMA, TPM, and Apparmor" and since I wanted to know more about the updates to key handling, here's the explanation from David Howells on that: "Okay. There are a number of separate bits. I'll go over the big bits and the odd important other bit, most of the smaller bits are just fixes and cleanups. If you want the small bits accounting for, I can do that too. (1) Keyring capacity expansion. KEYS: Consolidate the concept of an 'index key' for key access KEYS: Introduce a search context structure KEYS: Search for auth-key by name rather than target key ID Add a generic associative array implementation. KEYS: Expand the capacity of a keyring Several of the patches are providing an expansion of the capacity of a keyring. Currently, the maximum size of a keyring payload is one page. Subtract a small header and then divide up into pointers, that only gives you ~500 pointers on an x86_64 box. However, since the NFS idmapper uses a keyring to store ID mapping data, that has proven to be insufficient to the cause. Whatever data structure I use to handle the keyring payload, it can only store pointers to keys, not the keys themselves because several keyrings may point to a single key. This precludes inserting, say, and rb_node struct into the key struct for this purpose. I could make an rbtree of records such that each record has an rb_node and a key pointer, but that would use four words of space per key stored in the keyring. It would, however, be able to use much existing code. I selected instead a non-rebalancing radix-tree type approach as that could have a better space-used/key-pointer ratio. I could have used the radix tree implementation that we already have and insert keys into it by their serial numbers, but that means any sort of search must iterate over the whole radix tree. Further, its nodes are a bit on the capacious side for what I want - especially given that key serial numbers are randomly allocated, thus leaving a lot of empty space in the tree. So what I have is an associative array that internally is a radix-tree with 16 pointers per node where the index key is constructed from the key type pointer and the key description. This means that an exact lookup by type+description is very fast as this tells us how to navigate directly to the target key. I made the data structure general in lib/assoc_array.c as far as it is concerned, its index key is just a sequence of bits that leads to a pointer. It's possible that someone else will be able to make use of it also. FS-Cache might, for example. (2) Mark keys as 'trusted' and keyrings as 'trusted only'. KEYS: verify a certificate is signed by a 'trusted' key KEYS: Make the system 'trusted' keyring viewable by userspace KEYS: Add a 'trusted' flag and a 'trusted only' flag KEYS: Separate the kernel signature checking keyring from module signing These patches allow keys carrying asymmetric public keys to be marked as being 'trusted' and allow keyrings to be marked as only permitting the addition or linkage of trusted keys. Keys loaded from hardware during kernel boot or compiled into the kernel during build are marked as being trusted automatically. New keys can be loaded at runtime with add_key(). They are checked against the system keyring contents and if their signatures can be validated with keys that are already marked trusted, then they are marked trusted also and can thus be added into the master keyring. Patches from Mimi Zohar make this usable with the IMA keyrings also. (3) Remove the date checks on the key used to validate a module signature. X.509: Remove certificate date checks It's not reasonable to reject a signature just because the key that it was generated with is no longer valid datewise - especially if the kernel hasn't yet managed to set the system clock when the first module is loaded - so just remove those checks. (4) Make it simpler to deal with additional X.509 being loaded into the kernel. KEYS: Load *.x509 files into kernel keyring KEYS: Have make canonicalise the paths of the X.509 certs better to deduplicate The builder of the kernel now just places files with the extension ".x509" into the kernel source or build trees and they're concatenated by the kernel build and stuffed into the appropriate section. (5) Add support for userspace kerberos to use keyrings. KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches KEYS: Implement a big key type that can save to tmpfs Fedora went to, by default, storing kerberos tickets and tokens in tmpfs. We looked at storing it in keyrings instead as that confers certain advantages such as tickets being automatically deleted after a certain amount of time and the ability for the kernel to get at these tokens more easily. To make this work, two things were needed: (a) A way for the tickets to persist beyond the lifetime of all a user's sessions so that cron-driven processes can still use them. The problem is that a user's session keyrings are deleted when the session that spawned them logs out and the user's user keyring is deleted when the UID is deleted (typically when the last log out happens), so neither of these places is suitable. I've added a system keyring into which a 'persistent' keyring is created for each UID on request. Each time a user requests their persistent keyring, the expiry time on it is set anew. If the user doesn't ask for it for, say, three days, the keyring is automatically expired and garbage collected using the existing gc. All the kerberos tokens it held are then also gc'd. (b) A key type that can hold really big tickets (up to 1MB in size). The problem is that Active Directory can return huge tickets with lots of auxiliary data attached. We don't, however, want to eat up huge tracts of unswappable kernel space for this, so if the ticket is greater than a certain size, we create a swappable shmem file and dump the contents in there and just live with the fact we then have an inode and a dentry overhead. If the ticket is smaller than that, we slap it in a kmalloc()'d buffer" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (121 commits) KEYS: Fix keyring content gc scanner KEYS: Fix error handling in big_key instantiation KEYS: Fix UID check in keyctl_get_persistent() KEYS: The RSA public key algorithm needs to select MPILIB ima: define '_ima' as a builtin 'trusted' keyring ima: extend the measurement list to include the file signature kernel/system_certificate.S: use real contents instead of macro GLOBAL() KEYS: fix error return code in big_key_instantiate() KEYS: Fix keyring quota misaccounting on key replacement and unlink KEYS: Fix a race between negating a key and reading the error set KEYS: Make BIG_KEYS boolean apparmor: remove the "task" arg from may_change_ptraced_domain() apparmor: remove parent task info from audit logging apparmor: remove tsk field from the apparmor_audit_struct apparmor: fix capability to not use the current task, during reporting Smack: Ptrace access check mode ima: provide hash algo info in the xattr ima: enable support for larger default filedata hash algorithms ima: define kernel parameter 'ima_template=' to change configured default ima: add Kconfig default measurement list template ...
2013-11-21Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-38/+102
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-19Merge tag 'arc-v3.13-rc1-part2' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull second set of ARC changes from Vineet Gupta: - Support for Perf from Mischa - Enabling GPIO/Pinctrl drivers for Abilis TB10x platform - New defconfig for buildroot * tag 'arc-v3.13-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-arcfpga] Add defconfig without initramfs location ARC: perf: ARC 700 PMU doesn't support sampling events ARC: Add documentation on DT binding for ARC700 PMU ARC: Add perf support for ARC700 cores ARC: [TB10x] Updates for GPIO and pinctrl
2013-11-19Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds5-0/+69
Pull watchdog changes from Wim Van Sebroeck: - addition of MOXA ART watchdog driver (moxart_wdt) - addition of CSR SiRFprimaII and SiRFatlasVI watchdog driver (sirfsoc_wdt) - addition of ralink watchdog driver (rt2880_wdt) - various fixes and cleanups (__user annotation, ioctl return codes, removal of redundant of_match_ptr, removal of unnecessary amba_set_drvdata(), use allocated buffer for usb_control_msg, ...) - removal of MODULE_ALIAS_MISCDEV statements - watchdog related DT bindings - first set of improvements on the w83627hf_wdt driver * git://www.linux-watchdog.org/linux-watchdog: (26 commits) watchdog: w83627hf: Use helper functions to access superio registers watchdog: w83627hf: Enable watchdog device only if not already enabled watchdog: w83627hf: Enable watchdog only once watchdog: w83627hf: Convert to watchdog infrastructure watchdog: omap_wdt: raw read and write endian fix watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATE watchdog: pcwd_usb: overflow in usb_pcwd_send_command() watchdog: rt2880_wdt: fix return value check in rt288x_wdt_probe() watchdog: watchdog_core: Fix a trivial typo watchdog: dw: Enable OF support for DW watchdog timer watchdog: Get rid of MODULE_ALIAS_MISCDEV statements watchdog: ts72xx_wdt: Propagate return value from timeout_to_regval watchdog: pcwd_usb: Use allocated buffer for usb_control_msg watchdog: sp805_wdt: Remove unnecessary amba_set_drvdata() watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI watchdog: Remove redundant of_match_ptr watchdog: ts72xx_wdt: cleanup return codes in ioctl documentation/devicetree: Move DT bindings from gpio to watchdog watchdog: add ralink watchdog driver watchdog: Add MOXA ART watchdog driver ...
2013-11-19Merge branch 'i2c/for-next' of ↵Linus Torvalds4-0/+143
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
2013-11-19Merge tag 'for-v3.13' of git://git.infradead.org/battery-2.6Linus Torvalds2-0/+52
Pull battery updates from Anton Vorontsov: "Highlights: - A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia. - Device tree bindings for TWL4030 chips. - Random fixes and cleanups" * tag 'for-v3.13' of git://git.infradead.org/battery-2.6: pm2301-charger: Remove unneeded NULL checks twl4030_charger: Add devicetree support power_supply: Fix documentation for TEMP_*ALERT* properties max17042_battery: Support regmap to access device's registers max17042_battery: Use SIMPLE_DEV_PM_OPS charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code bq2415x_charger: Fix max battery regulation voltage tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code tps65090-charger: Drop devm_free_irq of devm_ allocated irq power_supply: Add support for bq24735 charger pm2301-charger: Staticize pm2xxx_charger_die_therm_mngt pm2301-charger: Check return value of regulator_enable ab8500-charger: Remove redundant break ab8500-charger: Check return value of regulator_enable isp1704_charger: Fix driver to work with changes introduced in v3.5
2013-11-19Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-0/+29
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series include: - a new Remote Controller driver for ST SoC with the corresponding DT bindings - a new frontend (cx24117) - a new I2C camera flash driver (lm3560) - a new mem2mem driver for TI SoC (ti-vpe) - support for Raphael r828d added to r820t driver - some improvements on buffer allocation at VB2 core - usual driver fixes and improvements PS this time, we have a smaller number of patches. While it is hard to pinpoint to the reasons, I believe that it is mainly due to: 1) there are several patch series ready, but depending on DT review. I decided to grant some extra time for DT maintainers to look on it, as they're expecting to have more time with the changes agreed during ARM mini-summit and KS. If they can't review in time for 3.14, I'll review myself and apply for the next merge window. 2) I suspect that having both LinuxCon EU and LinuxCon NA happening during the same merge window affected the development productivity, as several core media developers participated on both events" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits) [media] media: st-rc: Add ST remote control driver [media] gpio-ir-recv: Include linux/of.h header [media] tvp7002: Include linux/of.h header [media] tvp514x: Include linux/of.h header [media] ths8200: Include linux/of.h header [media] adv7343: Include linux/of.h header [media] v4l: Fix typo in v4l2_subdev_get_try_crop() [media] media: i2c: add driver for dual LED Flash, lm3560 [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2 [media] rtl28xxu: add RTL2832P + R828D support [media] rtl2832: add new tuner R828D [media] r820t: add support for R828D [media] media/i2c: ths8200: fix build failure with gcc 4.5.4 [media] Add support for KWorld UB435-Q V2 [media] staging/media: fix msi3101 build errors [media] ddbridge: Remove casting the return value which is a void pointer [media] ngene: Remove casting the return value which is a void pointer [media] dm1105: remove unneeded not-null test [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED [media] media: rcar_vin: Add preliminary r8a7790 support ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-09 18:36:57 +0300