summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2016-03-13Merge remote-tracking branches 'asoc/topic/ab8500', 'asoc/topic/adau17x1', ↵Mark Brown2-0/+35
'asoc/topic/ads117x', 'asoc/topic/adsp' and 'asoc/topic/arizona' into asoc-next
2016-03-13Merge remote-tracking branch 'asoc/topic/pcm179x' into asoc-nextMark Brown1-1/+10
2016-03-05ASoC: ads117x: Add bindings documentation for TI ADS117x ADCFlorian Vaussard1-0/+11
Currently the binding is only made of the compatible string. Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "We didn't have a batch last week, so this one is slightly larger. None of them are scary though, a handful of fixes for small DT pieces, replacing properties with newer conventions. Highlights: - N900 fix for setting system revision - onenand init fix to avoid filesystem corruption - Clock fix for audio on Beaglebone-x15 - Fixes on shmobile to deal with CONFIG_DEBUG_RODATA (default y in 4.6) + misc smaller stuff" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Extend info, add wiki and ml for meson arch MAINTAINERS: alpine: add a new maintainer and update the entry ARM: at91/dt: fix typo in sama5d2 pinmux descriptions ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption Revert "regulator: tps65217: remove tps65217.dtsi file" ARM: shmobile: Remove shmobile_boot_arg ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Move shmobile_scu_base from .text to .bss ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid ARM: OMAP2+: Improve omap_device error for driver writers ARM: DTS: am57xx-beagle-x15: Select SYS_CLK2 for audio clocks ARM: dts: am335x/am57xx: replace gpio-key,wakeup with wakeup-source property ARM: OMAP2+: Set system_rev from ATAGS for n900 ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl ARM: dts: kirkwood: use unique machine name for ds112 ARM: dts: imx6: remove bogus interrupt-parent from CAAM node
2016-02-24Merge tag 'omap-for-v4.5/fixes-rc5' of ↵Olof Johansson1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Two omap fixes for omaps against v4.5-rc5: - Yet another fix for n900 onenand to avoid corruption. This time to fix the issue of mounting onenand back and forth between the original maemo kernel and mainline Linux kernel. And it also seems there will be two more fixes coming via the MTD tree as issues were discovered also in the onenand driver during testing. - Revert tps65217 regulator clean up as it breaks MMC for am335x variants. The proper way to clean this up is just to rename the tps65217.dtsi file into tps65217-am335x.dtsi as a similar setup is used on many am335x boards. * tag 'omap-for-v4.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption Revert "regulator: tps65217: remove tps65217.dtsi file" Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24ASoC: adau17x1: Add adau17x1 bindings documentAndreas Irestål1-0/+24
Signed-off-by: Andreas Irestål <andire@axis.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+2
Pull networking fixes from David Miller: "Looks like a lot, but mostly driver fixes scattered all over as usual. Of note: 1) Add conditional sched in nf conntrack in cleanup to avoid NMI watchdogs. From Florian Westphal. 2) Fix deadlock in nfnetlink cttimeout, also from Floarian. 3) Fix handling of slaves in bonding ARP monitor validation, from Jay Vosburgh. 4) Callers of ip_cmsg_send() are responsible for freeing IP options, some were not doing so. Fix from Eric Dumazet. 5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT. 6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot. 7) bcm7xxx PHY driver bug fixes from Florian Fainelli. 8) Avoid unaligned accesses to protocol headers wrt. GRE, from Alexander Duyck. 9) SKB leaks and other problems in arc_emac driver, from Alexander Kochetkov. 10) tcp_v4_inbound_md5_hash() releases listener socket instead of request socket on error path, oops. Fix from Eric Dumazet. 11) Missing socket release in pppoe_rcv_core() that seems to have existed basically forever. From Guillaume Nault. 12) Missing slave_dev unregister in dsa_slave_create() error path, from Florian Fainelli. 13) crypto_alloc_hash() never returns NULL, fix return value check in __tcp_alloc_md5sig_pool. From Insu Yun. 14) Properly expire exception route entries in ipv4, from Xin Long. 15) Fix races in tcp/dccp listener socket dismantle, from Eric Dumazet. 16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not legal. These drivers modify the SKB on transmit. From Jiri Benc. 17) Fix regression in the initialziation of netdev->tx_queue_len. From Phil Sutter. 18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun. 19) SCTP port hash sizing does not properly ensure that table is a power of two in size. From Neil Horman. 20) Fix initializing of software copy of MAC address in fmvj18x_cs driver, from Ken Kawasaki" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits) bnx2x: Fix 84833 phy command handler bnx2x: Fix led setting for 84858 phy. bnx2x: Correct 84858 PHY fw version bnx2x: Fix 84833 RX CRC bnx2x: Fix link-forcing for KR2 net: ethernet: davicom: fix devicetree irq resource fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address Driver: Vmxnet3: Update Rx ring 2 max size net: netcp: rework the code for get/set sw_data in dma desc soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data net: ti: netcp: restore get/set_pad_info() functionality MAINTAINERS: Drop myself as xen netback maintainer sctp: Fix port hash table size computation can: ems_usb: Fix possible tx overflow Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb net: bcmgenet: Fix internal PHY link state af_unix: Don't use continue to re-execute unix_stream_read_generic loop unix_diag: fix incorrect sign extension in unix_lookup_by_ino bnxt_en: Failure to update PHY is not fatal condition. bnxt_en: Remove unnecessary call to update PHY settings. ...
2016-02-20Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "An assortment of vendor specific clk drivers fixes, most notably fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers this cycle. There's also the random smattering of sparse/checker fixes, a build "fix" to get the Tango clk driver to compile because the Kconfig symbol was renamed after the fact, and a clk gpio fix for a patch mismerge" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (28 commits) clk: gpio: Really allow an optional clock= DT property Revert "clk: qcom: Specify LE device endianness" clk: versatile: mask VCO bits before writing clk: tegra: super: Fix sparse warnings for functions not declared as static clk: tegra: Fix sparse warnings for functions not declared as static clk: tegra: Fix sparse warning for pll_m clk: tegra: Use definition for pll_u override bit clk: tegra: Fix warning caused by pll_u failing to lock clk: tegra: Fix clock sources for Tegra210 EMC clk: tegra: Add the APB2APE audio clock on Tegra210 clk: tegra: Add missing of_node_put() clk: tegra: Fix PLLE SS coefficients clk: tegra: Fix typos around clearing PLLE bits during enable clk: tegra: Do not disable PLLE when under hardware control clk: tegra: Fix pllx dyn step calculation clk: tegra: pll: Fix potential sleeping-while-atomic clk: tegra: Fix the misnaming of nvenc from msenc clk: tegra: Fix naming of MISC registers clk: tango4: rename ARCH_TANGOX to ARCH_TANGO clk: scpi: Fix checking return value of platform_device_register_simple() ...
2016-02-19Revert "regulator: tps65217: remove tps65217.dtsi file"Peter Ujfalusi1-10/+0
This reverts commit 8e6ebfaa9b384088002baa10f7534efa73a0794e. Without the patch reverted regulators will not work. This prevents MMC to be working for example so the boards can not boot to MMC rootfs. Tested it on beaglebone white and bisect also points to the reverted commit. The issue can be also fixed by adding "regulator-compatible =" to all board dts file for the regulators. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-17ravb: Update DT binding example for final CPG/MSSR bindingsGeert Uytterhoeven1-2/+2
The example in the DT binding documentation uses the preliminary DT bindings for the r8a7795 MSTP clocks, which never went upstream. Update the example to use the DT bindings for the upstream Clock Pulse Generator / Module Standby and Software Reset hardware block. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17Merge tag 'devicetree-fixes-for-4.5-2' of ↵Linus Torvalds3-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - Fix irq msi-map calculation for nonzero rid-base. - Binding doc updates for GICv3, fsl-imx-uart, and S3C RTC. * tag 'devicetree-fixes-for-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: rtc: s3c: Document required clocks in the DT binding serial: fsl-imx-uart: Fix typo in fsl,dte-mode description dt-bindings: arm, gic-v3: require that reserved cells are always 0 of/irq: Fix msi-map calculation for nonzero rid-base
2016-02-14Merge branch 'fixes' of ↵Linus Torvalds1-2/+35
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal management fixes from Eduardo Valentin: "Specifics in this pull request: - Compilation fixes on SPEAR, and U8500 thermal drivers. - RCAR thermal driver now recognizes OF-thermal based thermal zones. - Small code rework on OF-thermal. - These change have been CI tested using KernelCI bot [1,2]. \o/ I am taking over on Rui's behalf while he is out. Happy New Chinese Year! [1] - https://kernelci.org/build/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/ [2] - https://kernelci.org/boot/all/job/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: cpu_cooling: fix out of bounds access in time_in_idle thermal: allow u8500-thermal driver to be a module thermal: allow spear-thermal driver to be a module thermal: spear: use __maybe_unused for PM functions thermal: rcar: enable to use thermal-zone on DT thermal: of: use for_each_available_child_of_node for child iterator
2016-02-13Merge tag 'pci-v4.5-fixes-1' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are some Renesas binding updates for PCI host controllers, a Broadcom fix for a regression we added in v4.5-rc1, and a fix for an AER use-after-free problem that can cause memory corruption. Summary: AER: Flush workqueue on device remove to avoid use-after-free (Sebastian Andrzej Siewior) Broadcom iProc host bridge driver: Allow multiple devices except on PAXC (Ray Jui) Renesas R-Car host bridge driver: Add gen2 device tree support for r8a7793 (Simon Horman) Add device tree support for r8a7793 (Simon Horman)" * tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add device tree support for r8a7793 PCI: rcar: Add gen2 device tree support for r8a7793 PCI: iproc: Allow multiple devices except on PAXC PCI/AER: Flush workqueue on device remove to avoid use-after-free
2016-02-13rtc: s3c: Document required clocks in the DT bindingJavier Martinez Canillas1-0/+6
The S3C Real Time Clock driver requires the clock and source clock to be defined in the device node but that requirement is not documented. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-02-13serial: fsl-imx-uart: Fix typo in fsl,dte-mode descriptionFabio Estevam1-1/+1
We should say "The uart works in DCE mode". Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-02-13dt-bindings: arm, gic-v3: require that reserved cells are always 0Will Deacon1-3/+2
The arm,gic-v3 binding was written with good intentions and doesn't enforce interrupt-cells to be 3, therefore making it easy to extend the irq description in future if necessary: > Cells 4 and beyond are reserved for future use. Unfortunately, this sentence is immediately followed up with: > When the 1st cell has a value of 0 or 1, cells 4 and beyond act as > padding, and may be ignored. It is recommended that padding cells > have a value of 0. Consequently, any extensions to the PPI or SPI interrupt specifiers must be able to work with random crap from legacy DTs, effectively necessitating a new interrupt type in the first cell. Sigh. This patch fixes the text so that additional, reserved cells are required to be zero. This looks like a reasonable thing to require and is already satisifed by the .dts files in-tree. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-02-10Merge remote-tracking branches 'asoc/fix/amd', 'asoc/fix/arizona', ↵Mark Brown1-0/+2
'asoc/fix/dpcm', 'asoc/fix/dwc', 'asoc/fix/fsl' and 'asoc/fix/fsl-ssi' into asoc-linus
2016-02-10thermal: rcar: enable to use thermal-zone on DTKuninori Morimoto1-2/+35
This patch enables to use thermal-zone on DT if it was calles as "renesas,rcar-thermal-gen2". Previous style (= non thermal-zone) is still supported by "renesas,rcar-thermal" to keep compatibility for "git bisect". Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-05PCI: rcar: Add device tree support for r8a7793Simon Horman1-0/+1
Add "renesas,pcie-r8a7793" as a compatibility string for "renesas,pcie-rcar-gen2". This doesn't change the driver, so it does nothing by itself. But it does mean that checkpatch won't complain about a future patch that adds "renesas,pci-r8a7793" to a DT, which helps ensure that shipped DTs use documented compatibility strings. [bhelgaas: changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org>
2016-02-05PCI: rcar: Add gen2 device tree support for r8a7793Simon Horman1-0/+1
Add "renesas,pci-r8a7793" as a compatibility string for "renesas,pci-rcar-gen2". This doesn't change the driver, so it does nothing by itself. But it does mean that checkpatch won't complain about a future patch that adds "renesas,pci-r8a7793" to a DT, which helps ensure that shipped DTs use documented compatibility strings. [bhelgaas: changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org>
2016-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-28/+17
Pull networking fixes from David Miller: "This looks like a lot but it's a mixture of regression fixes as well as fixes for longer standing issues. 1) Fix on-channel cancellation in mac80211, from Johannes Berg. 2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables module, from Eric Dumazet. 3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric Dumazet. 4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is bound, from Craig Gallek. 5) GRO key comparisons don't take lightweight tunnels into account, from Jesse Gross. 6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric Dumazet. 7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we register them, otherwise the NEWLINK netlink message is missing the proper attributes. From Thadeu Lima de Souza Cascardo. 8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido Schimmel 9) Handle fragments properly in ipv4 easly socket demux, from Eric Dumazet. 10) Don't ignore the ifindex key specifier on ipv6 output route lookups, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits) tcp: avoid cwnd undo after receiving ECN irda: fix a potential use-after-free in ircomm_param_request net: tg3: avoid uninitialized variable warning net: nb8800: avoid uninitialized variable warning net: vxge: avoid unused function warnings net: bgmac: clarify CONFIG_BCMA dependency net: hp100: remove unnecessary #ifdefs net: davinci_cpdma: use dma_addr_t for DMA address ipv6/udp: use sticky pktinfo egress ifindex on connect() ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail() netlink: not trim skb for mmaped socket when dump vxlan: fix a out of bounds access in __vxlan_find_mac net: dsa: mv88e6xxx: fix port VLAN maps fib_trie: Fix shift by 32 in fib_table_lookup net: moxart: use correct accessors for DMA memory ipv4: ipconfig: avoid unused ic_proto_used symbol bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout. bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter. bnxt_en: Ring free response from close path should use completion ring net_sched: drr: check for NULL pointer in drr_dequeue ...
2016-01-30Merge tag 'v4.5-rockchip-clkfixes1' of ↵Stephen Boyd1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Pull rockchip fixes from Heiko Stuebner: Fixes for wrong register offsets in both rk3036 and rk3368. Also rename the external input for the emac on rk3036, which should still be ok to do, as that binding was only introduced during this merge-window. * tag 'v4.5-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: rk3368: fix some clock gates clk: rockchip: rk3036: rename emac ext source clock clk: rockchip: rk3036: fix the div offset for emac clock clk: rockchip: rk3036: fix uarts clock error clk: rockchip: rk3036: fix the FLAGs for clock mux
2016-01-29DT: phy.txt: Clarify expected compatible valuesAndrew Lunn4-20/+6
PHY devices may only list compatibility with clause 22, 45, and if they need to be more specific, their PHY identifier values. No other compatible strings are allowed. Make this clear in the documentation, and remove examples where make/model compatible strings are listed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29ASoC: pcm179x: Add I2C interface driverJacob Siverskog1-1/+10
The PCM179x family supports both SPI and I2C. This patch adds support for the I2C interface. Signed-off-by: Jacob Siverskog <jacob@teenage.engineering> Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds6-0/+235
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24Merge branch 'next' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "The top merge commit was re-generated yesterday because two topic branches were dropped from this pull request in the last minute due to some unaddressed comments. All the other material has been in linux-next for quite a while. Specifics: - Enhance thermal core to handle unexpected device cooling states after fresh boot and system resume. From Zhang Rui and Chen Yu. - Several fixes and cleanups on Rockchip and RCAR thermal drivers. From Caesar Wang and Kuninori Morimoto. - Add Broxton support for Intel processor thermal reporting device driver. From Amy Wiles" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: trip_point_temp_store() calls thermal_zone_device_update() thermal: rcar: rcar_thermal_get_temp() return error if strange temp thermal: rcar: check irq possibility in rcar_thermal_irq_xxx() thermal: rcar: check every rcar_thermal_update_temp() return value thermal: rcar: move rcar_thermal_dt_ids to upside thermal: rockchip: Support the RK3399 SoCs in thermal driver thermal: rockchip: Support the RK3228 SoCs in thermal driver dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible thermal: rockchip: fix a trivial typo Thermal: Enable Broxton SoC thermal reporting device thermal: constify pch_dev_ops structure Thermal: do thermal zone update after a cooling device registered Thermal: handle thermal zone device properly during system sleep Thermal: initialize thermal zone device correctly
2016-01-24dt/bindings: Add bindings for PIC32/MZDA platformsJoshua Henderson1-0/+31
This adds support for the Microchip PIC32 platform along with the specific variant PIC32MZDA on a PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12096/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24dt/bindings: Add bindings for PIC32 interrupt controllerCristian Birsan1-0/+67
Document the devicetree bindings for the interrupt controller on Microchip PIC32 class devices. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12093/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-23Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "The second round of updates for the input subsystem, mainly changes to xpad driver to better hanlde Xbox One controllers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio-keys - allow disabling individual buttons in DT Input: gpio-keys - allow setting input device name in DT Input: xpad - correct xbox one pad device name Input: atmel_mxt_ts - improve touchscreen size/orientation handling Input: xpad - use LED API when identifying wireless controllers Input: xpad - workaround dead irq_out after suspend/ resume Input: xpad - update Xbox One Force Feedback Support Input: xpad - correctly handle concurrent LED and FF requests Input: xpad - handle "present" and "gone" correctly Input: xpad - remove spurious events of wireless xpad 360 controller
2016-01-22Merge branch 'next' into for-linusDmitry Torokhov1-0/+1
Prepare second round of input updates for 4.5 merge window.
2016-01-21net: mvneta: update clocks property and document additional clock-namesJisheng Zhang1-1/+6
Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21net: hns: enet specifies a reference to dsafyankejian2-7/+5
This patch replace the assoication between dsaf and enet from string matching to object reference. It requires the DTS to be updated within BIOS. Thanks god it can be done for all released boards. Signed-off-by: Kejian Yan <yankejian@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-21Merge tag 'pci-v4.5-changes' of ↵Linus Torvalds5-10/+302
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
2016-01-21Merge tag 'pwm/for-4.5-rc1' of ↵Linus Torvalds2-2/+25
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes contains a new driver for OMAP (using the dual-mode timers) as well as an assortment of fixes all across the board" * tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Mark all devices as "might sleep" pwm: omap-dmtimer: Potential NULL dereference on error pwm: add HAS_IOMEM dependency to PWM_FSL_FTM pwm: Add PWM driver for OMAP using dual-mode timers pwm: rcar: Improve accuracy of frequency division setting pwm: lpc32xx: return ERANGE, if requested period is not supported pwm: lpc32xx: fix and simplify duty cycle and period calculations pwm: lpc32xx: make device usable with common clock framework pwm: lpc32xx: correct number of PWM channels from 2 to 1 dt: lpc32xx: pwm: update documentation of LPC32xx PWM device dt: lpc32xx: pwm: correct LPC32xx PWM device node example pwm: fsl-ftm: Fix clock enable/disable when using PM pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE pwm: lpss: Select core part automatically pwm: lpss: Update PWM setting for Broxton pwm: bcm2835: Fix email address specification pwm: bcm2835: Prevent division by zero pwm: bcm2835: Calculate scaler in ->config() pwm: lpss: Remove ->free() callback
2016-01-21Merge tag 'for-4.5' of git://git.osdn.jp/gitroot/uclinux-h8/linuxLinus Torvalds1-1/+1
Pull h8300 updates from Yoshinori Sato: - Add KGDB support - zImage fix - various cleanup * tag 'for-4.5' of git://git.osdn.jp/gitroot/uclinux-h8/linux: h8300: System call entry enable interrupt. h8300: show_stack cleanup h8300: Restraint of warning. h8300: Add KGDB support. irqchip: renesas-h8s: Replace ctrl_outw/ctrl_inw with writew/readw h8300: signal stack fix h8300: Add LZO compression h8300: zImage alignment fix clk: h8300: Remove "sh73a0-" part from compatible value h8300: zImage alignment fix
2016-01-21Merge tag 'armsoc-drivers' of ↵Linus Torvalds4-0/+204
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2016-01-21Merge tag 'armsoc-dt64' of ↵Linus Torvalds4-0/+43
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Olof Johansson: "This is the first release where we split up the 64-bit contributions a bit more, and in particular we are having a separate DT branch for them. Contents: - New devices added to Broadcom NorthStar2 - Misc fixes for Exynos7 boards - QCOM updates for MSM8916 - Rockchip tweaks for rk3368 SoC and eval board - A series of fixes for APM X-Gene v1 and v2 - Renesas R8A7795 CPU/PSCI additions - Marvell Berlin4CT PSCI, cpuidle, watchdog portions - Freescale LS1043a SoC and dev board support + some treewide or other misc changes" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits) dts/ls2080a: Update DTSI to add support of SP805 WDT Documentation: DT: Add entry for ARM SP805-WDT arm64: dts: X-Gene v2: I2C1 clock is always on arm64: dts: X-Gene v1: I2C0 clock is always on arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms arm64: dts: hikey: add label properties to UARTs arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI arm64: dts: apq8016-sbc: enable UART0 on LS connector arm64: dts: juno: Add idle-states to device tree arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC arm64: dts: add LS1043a-RDB board support arm64: dts: add Freescale LS1043a SoC support Documentation: DT: Add entry for Freescale LS1043a-RDB board arm64: dts: uniphier: add PH1-LD10 SoC/board support arm64: renesas: r8a7795: fix SATA clock assignment arm64: dts: salvator-x: Enable SATA controller arm64: dts: r8a7795: Add SATA controller node arm64: renesas: r8a7795: add internal delay for i2c IPs arm64: renesas: salvator-x: Add board part number to DT bindings arm64: dts: r8a7795: Add pmu device nodes ...
2016-01-21Merge tag 'armsoc-dt' of ↵Linus Torvalds28-17/+528
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...
2016-01-21Merge tag 'armsoc-soc' of ↵Linus Torvalds2-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ...
2016-01-21Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2016-01-20Merge tag 'dmaengine-fix-4.5-rc1' of ↵Linus Torvalds1-3/+10
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Here is my second pull request for this window: A few driver fixes have piled up and one missed rcar bindings patch which got somehow lost in for-linus branch so cherry-picked that one. Fixes are for dw, at_hdmac, edma" * tag 'dmaengine-fix-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: rcar-dmac: Document SoC specific bindings dmaengine: at_xdmac: fix resume for cyclic transfers dmaengine: dw: fix cyclic transfer callbacks dmaengine: dw: fix cyclic transfer setup dmaengine: edma: Fix paRAM slot allocation for entry channel 0
2016-01-20clk: h8300: Remove "sh73a0-" part from compatible valueGeert Uytterhoeven1-1/+1
Drop the bogus "sh73a0-" part (accidentally copied from shmobile?) from the compatible value. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-01-20Documentation: DT: net: add docs for ralink/mediatek SoC ethernet bindingJohn Crispin3-0/+119
Add three files. ralink,rt2880-net.txt descibes the actual frame engine and the other two describe the switch forntend bindings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Michael Lee <igvtee@gmail.com> Cc: devicetree@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Cc: John Crispin <blogic@openwrt.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: Michael Lee <igvtee@gmail.com> Cc: steven.liu@mediatek.com Cc: Fred.Chang@mediatek.com Patchwork: https://patchwork.linux-mips.org/patch/11970/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-19Merge tag 'iommu-updates-v4.5' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "The updates include: - Small code cleanups in the AMD IOMMUv2 driver - Scalability improvements for the DMA-API implementation of the AMD IOMMU driver. This is just a starting point, but already showed some good improvements in my tests. - Removal of the unused Renesas IPMMU/IPMMUI driver - Updates for ARM-SMMU include: * Some fixes to get the driver working nicely on Broadcom hardware * A change to the io-pgtable API to indicate the unit in which to flush (all callers converted, with Ack from Laurent) * Use of devm_* for allocating/freeing the SMMUv3 buffers - Some other small fixes and improvements for other drivers" * tag 'iommu-updates-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (46 commits) iommu/vt-d: Fix up error handling in alloc_iommu iommu/vt-d: Check the return value of iommu_device_create() iommu/amd: Remove an unneeded condition iommu/amd: Preallocate dma_ops apertures based on dma_mask iommu/amd: Use trylock to aquire bitmap_lock iommu/amd: Make dma_ops_domain->next_index percpu iommu/amd: Relax locking in dma_ops path iommu/amd: Initialize new aperture range before making it visible iommu/amd: Build io page-tables with cmpxchg64 iommu/amd: Allocate new aperture ranges in dma_ops_alloc_addresses iommu/amd: Optimize dma_ops_free_addresses iommu/amd: Remove need_flush from struct dma_ops_domain iommu/amd: Iterate over all aperture ranges in dma_ops_area_alloc iommu/amd: Flush iommu tlb in dma_ops_free_addresses iommu/amd: Rename dma_ops_domain->next_address to next_index iommu/amd: Remove 'start' parameter from dma_ops_area_alloc iommu/amd: Flush iommu tlb in dma_ops_aperture_alloc() iommu/amd: Retry address allocation within one aperture iommu/amd: Move aperture_range.offset to another cache-line iommu/amd: Add dma_ops_aperture_alloc() function ...
2016-01-19Merge branches 's390', 'arm/renesas', 'arm/msm', 'arm/shmobile', 'arm/smmu', ↵Joerg Roedel1-2/+10
'x86/amd' and 'x86/vt-d' into next
2016-01-18Merge tag 'fbdev-4.5' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: "Summary: - pxafb: device-tree support - An unsafe kernel parameter 'lockless_register_fb' for debugging problems happening while inside the console lock - Small miscellaneous fixes & cleanups - omapdss: add writeback support functions - Separation of omapfb and omapdrm (see below) About the separation of omapfb and omapdrm, see http://permalink.gmane.org/gmane.comp.video.dri.devel/143151 for longer story. The short version: omapfb and omapdrm have shared low level drivers (omapdss and panel drivers), making further development of omapdrm difficult. After these patches omapfb and omapdrm have their own versions of the drivers, which are more or less direct copies for now but will diverge soon. This also means that omapfb (everything under drivers/video/fbdev/omap2/) is now in maintenance mode, and all new development will be done for omapdrm (drivers/gpu/drm/omapdrm/)" * tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (49 commits) video: fbdev: pxafb: fix out of memory error path drm/omap: make omapdrm select OMAP2_DSS drm/omap: move omapdss & displays under omapdrm omapfb: move vrfb into omapfb omapfb: take omapfb's private omapdss into use omapfb/displays: change CONFIG_DISPLAY_* to CONFIG_FB_OMAP2_* omapfb/dss: change CONFIG_OMAP* to CONFIG_FB_OMAP* omapdss: remove CONFIG_OMAP2_DSS_VENC from omapdss.h omapfb: copy omapdss & displays for omapfb omapfb: allow compilation only if DRM_OMAP is disabled fbdev: omap2: panel-dpi: simplify gpio setting fbdev: omap2: panel-dpi: in .disable first disable backlight then display OMAPDSS: DSS: fix a warning message video: omapdss: delete unneeded of_node_put OMAPDSS: DISPC: Remove boolean comparisons OMAPDSS: DSI: cleanup DSI_IRQ_ERROR_MASK define OMAPDSS: remove extra out == NULL checks OMAPDSS: change internal dispc functions to static OMAPDSS: make a two dss feat funcs internal to omapdss OMAPDSS: remove extra EXPORT_SYMBOLs ...
2016-01-18dmaengine: rcar-dmac: Document SoC specific bindingsSimon Horman1-3/+10
In general Renesas hardware is not documented to the extent where the relationship between IP blocks on different SoCs can be assumed although they may appear to operate the same way. Furthermore the documentation typically does not specify a version for individual IP blocks. For these reasons a convention of using the SoC name in place of a version and providing SoC-specific compat strings has been adopted. Although not universally liked this convention is used in the bindings for most drivers for Renesas hardware. The purpose of this patch is to update the Renesas R-Car DMA Controller driver to follow this convention. Cc: devicetree@vger.kernel.org Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-18Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds14-16/+256
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.5. I don't think I've missed anything too major, I'm mostly back at work now but I'll probably get some sleep in 5 years time. Summary: New drivers: - etnaviv: GPU driver for the 3D core on the Vivante core used in numerous ARM boards. Highlights: Core: - Atomic suspend/resume helpers - Move the headers to using userspace friendlier types. - Documentation updates - Lots of struct_mutex removal. - Bunch of DP MST fixes from AMD. Panel: - More DSI helpers - Support for some new basic panels i915: - Basic Kabylake support - DP link training and detect code refactoring - fbc/psr fixes - FIFO underrun fixes - SDE interrupt handling fixes - dma-buf/fence support in pageflip path. - GPU side for MST audio support radeon/amdgpu: - Drop UMS support - GPUVM/Scheduler optimisations - Initial Powerplay support for Tonga/Fiji/CZ/ST - ACP audio prerequisites nouveau: - GK20a instmem improvements - PCIE link speed change support msm: - DSI support for msm8960/apq8064 tegra: - Host1X support for Tegra210 SoC vc4: - 3D acceleration support armada: - Get rid of struct mutex tda998x: - Atomic modesetting support - TMDS clock limitations omapdrm: - Atomic modesetting support - improved TILER performance rockchip: - RK3036 VOP support - Atomic modesetting support - Synopsys DW MIPI DSI support exynos: - Runtime PM support - of_graph binding for DP panels - Cleanup of IPP code - Configurable plane support - Kernel panic fixes at release time" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/amdgpu: add missing irq.h include drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates drm/vmwgfx: Fix an incorrect lock check drm: nouveau: fix nouveau_debugfs_init prototype drm/nouveau/pci: fix check in nvkm_pcie_set_link drm/amdgpu: validate duplicates first drm/amdgpu: move VM page tables to the LRU end on CS v2 drm/ttm: add ttm_bo_move_to_lru_tail function v2 drm/ttm: fix adding foreign BOs to the swap LRU drm/ttm: fix adding foreign BOs to the LRU during init v2 drm/radeon: use kobj_to_dev() drm/amdgpu: use kobj_to_dev() drm/amdgpu/cz: force vce clocks when sclks are forced drm/amdgpu/cz: force uvd clocks when sclks are forced drm/amdgpu/cz: add code to enable forcing VCE clocks drm/amdgpu/cz: add code to enable forcing UVD clocks drm/amdgpu: fix lost sync_to if scheduler is enabled. drm/amd/powerplay: fix static checker warning for return meaningless value. drm/sysfs: use kobj_to_dev() ...
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds3-1/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-17Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds5-0/+109
Pull watchdog updates from Wim Van Sebroeck: "This adds following items: - watchdog restart handler support - watchdog reboot notifier support - watchdog sysfs attributes - support for the following new devices: AMD Mullins platform, AMD Carrizo platform, meson8b SoC, CSRatlas7, TS-4800, Alphascale asm9260-wdt, Zodiac, Sigma Designs SMP86xx/SMP87xx - Changes in refcounting for the watchdog core - watchdog core improvements - and small fixes" * git://www.linux-watchdog.org/linux-watchdog: (60 commits) watchdog: asm9260: remove __init and __exit annotations watchdog: Drop pointer to watchdog device from struct watchdog_device watchdog: ziirave: Use watchdog infrastructure to create sysfs attributes watchdog: Add support for creating driver specific sysfs attributes watchdog: kill unref/ref ops watchdog: stmp3xxx: Remove unused variables watchdog: add MT7621 watchdog support hwmon: (sch56xx) Drop watchdog driver data reference count callbacks watchdog: da9055_wdt: Drop reference counting watchdog: da9052_wdt: Drop reference counting watchdog: Separate and maintain variables based on variable lifetime watchdog: diag288: Stop re-using watchdog core internal flags watchdog: Create watchdog device in watchdog_dev.c watchdog: qcom-wdt: Do not set 'dev' in struct watchdog_device watchdog: mena21: Do not use device pointer from struct watchdog_device watchdog: gpio: Do not use device pointer from struct watchdog_device watchdog: tangox: Print info message using pointer to platform device watchdog: bcm2835_wdt: Drop log message if watchdog is stopped devicetree: watchdog: add binding for Sigma Designs SMP8642 watchdog watchdog: add support for Sigma Designs SMP86xx/SMP87xx ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-12 07:05:12 +0300