| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A new compatible is added to reflect the specialized version of the HDL.
We use the parallel interface to write the ADC's registers, and
accessing this interface requires to use ADI_AXI_REG_CONFIG_RD,
ADI_AXI_REG_CONFIG_WR and ADI_AXI_REG_CONFIG_CTRL in a custom fashion.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Co-developed-by: Angelo Dureghello <adureghello@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250210-wip-bl-ad7606_add_backend_sw_mode-v4-1-160df18b1da7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a pwms property to the adi,ad4695 binding to specify an optional PWM
output connected to the CNV pin on the ADC.
Also add #trigger-source-cells property to allow the BUSY output to be
used as a SPI offload trigger source to indicate when a sample is ready
to be read.
Macros are added to adi,ad4695.h for the cell values to help with
readability since they are arbitrary values.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-13-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Convert binding doc leds-tlc591xx.txt to yaml format to fix below DTB_CHECK
warning.
arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dtb:
/soc@0/bus@30800000/i2c@30a30000/tlc59108@40: failed to match any schema with compatible: ['ti,tlc59108']
Additional change:
- ref to common.yaml for child nodes.
- limit child's reg to 0 - 7 for ti,tlc59108.
- fix typo 'linux,default_trigger' in example.
- change child node name's prefix to led-.
- change nodename to led-controller.
- fix properties order in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250107161628.121685-1-Frank.Li@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
By default, rfkill state is set to unblocked. Sometimes, we want to boot
in blocked state and let the application unblock the rfkill.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250116084702.3473176-1-catalin.popescu@leica-geosystems.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.14-rc3
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
* tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: remove Kalle
MAINTAINERS: wifi: ath: remove Kalle
wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
wifi: ath12k: fix handling of 6 GHz rules
====================
Link: https://patch.msgid.link/20250207182957.23315C4CED1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Device specific schemas should not allow undefined properties which is
what 'additionalProperties: true' allows. Add a reference to
mc-peripheral-props.yaml which has the additional properties used, and
fix this constraint.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-dt-lan9115-fix-v1-4-eb35389a7365@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
node properties
In order to validate devices in child nodes, the device schemas need to
reference any child node properties. In order to do that, the properties
for child nodes need to be included in mc-peripheral-props.yaml.
"reg: { maxItems: 1 }" was also incorrect. It's up to the device schemas
how many reg entries they have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-dt-lan9115-fix-v1-3-eb35389a7365@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In order to validate devices in child nodes, the device schemas need to
reference any child node properties. In order to do that, the properties
for child nodes need to be included in mc-peripheral-props.yaml.
"reg: { maxItems: 1 }" was also incorrect. It's up to the device schemas
how many reg entries they have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-dt-lan9115-fix-v1-2-eb35389a7365@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The preferred location for external parallel/memory buses is in
memory-controllers. 'bus' is generally for internal chip buses.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-dt-lan9115-fix-v1-1-eb35389a7365@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
spi: Add offload APIs
This series adds support for offloading complete SPI transactions,
including the initiation, to the hardware.
|
|
Remove the repeated word "to" docs.
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250207073433.23604-1-hanchunchao@inspur.com
|
|
(Almost?) all QMP PHYs come with both a "full reset" ("phy") and a
"retain certain registers" one ("phy_nocsr").
Drop the maxItems=1 constraint for resets and reset_names as we go
ahead and straighten out the DT usage. After that's done (which
will involve modifying some clock drivers etc.), we may set
*min*Items to 2, bar some possible exceptions.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-topic-x1p4_dts-v2-2-72cd4cdc767b@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
X1P42100 has two Gen4x4 PHYs instead of one Gen4x4 and one Gen4x8.
They are mostly identical to X1E80100's Gen4x4 PHY, but there are some
minor details in the programming sequences.
Introduce a new compatible for this flavor of the PHY.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-x1p4_dts-v2-1-72cd4cdc767b@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible for the HDPTX PHY on rk3576, which is compatible with
rk3588, but without rst_phy/rst_ropll/rst_lcpll.
In fact, these three reset lines are also optional on the rk3588,
they just used for debug, then they were removed on the rk3576 IC
design.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241231092721.252405-1-andyshrk@163.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a new compatible for the panels KINGDISPLAY KD110N11-51IE and
STARRY 2082109QFH040022-50E. Both panels use the HX83102 IC, so
add the compatible to the hx83102 bindings file.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250208105326.3850358-2-yelangyan@huaqin.corp-partner.google.com
|
|
Add a compatible string for SPDIF on RK3588, which is similar to the
one on RK3568.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250120-rk3588-spdif-v1-1-1415f5871dc7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a description, required properties, appropriate compatibles and
missing properties like clocks and clock-names which are not defined in
the text binding for all the SoCs that are supported by microchip.
Update the text binding name `atmel-dma.txt` to
`atmel,at91sam9g45-dma.yaml` for the files which reference to
`atmel-dma.txt`. Drop Tudor name from maintainers.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250203-test-v4-1-a9ec3eded1c7@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Rockchip company name has update to below name since 2021:
Rockchip Electronics Co., Ltd.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241205082258.857018-1-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This documents Ariaboard Photonicat which is a router based on RK3568 SoC.
Link: https://ariaboard.com/
Link: https://photonicat.com/
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114001411.1848529-3-bigfoot@classfun.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add an entry for Ariaboard from Shanghai Novotech
Ariaboard represents a product line from Shanghai Novotech Co., Ltd.
Link: https://shanghainovotech.com/
Link: https://ariaboard.com/
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114001411.1848529-2-bigfoot@classfun.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Device specific schemas should not allow undefined properties which is
what 'additionalProperties: true' allows. Add the missing child nodes
and fix this constraint.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250203213056.13827-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Document the MYIR Remi Pi" which is based on the Renesas
RZ/G2L ("R9A07G044L2") SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/20250131-myir-remi-pi-v3-1-2dda53e79291@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The blocks found on Apple A7-A11 SoCs are compatible with the existing
driver so add their per-SoC compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Hector Martin <marcan@marcan.st>
Acked-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
The blocks found on Apple A7-A11 SoCs are compatible with the existing
driver so add their per-SoC compatibles.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Hector Martin <marcan@marcan.st>
Acked-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Add the following apple,t8012 based platforms:
- Apple T2 MacBookPro15,2 (j132)
- Apple T2 iMacPro1,1 (j137)
- Apple T2 MacBookAir8,2 (j140a)
- Apple T2 MacBookAir8,1 (j140k)
- Apple T2 MacBookPro16,1 (j152f)
- Apple T2 MacPro7,1 (j160)
- Apple T2 Macmini8,1 (j174)
- Apple T2 iMac20,1 (j185)
- Apple T2 iMac20,2 (j185f)
- Apple T2 MacBookPro15,4 (j213)
- Apple T2 MacBookPro16,2 (j214k)
- Apple T2 MacBookPro16,4 (j215)
- Apple T2 MacBookPro16,3 (j223)
- Apple T2 MacBookAir9,1 (j230k)
- Apple T2 MacBookPro15,1 (j680)
- Apple T2 MacBookPro15,3 (j780)
These devices have no offical names, the naming scheme is from
libirecovery.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
|
Add bindings for the Inside Secure SafeXcel EIP-93 crypto engine.
The IP is present on Airoha SoC and on various Mediatek devices and
other SoC under different names like mtk-eip93 or PKTE.
All the compatible that currently doesn't have any user are defined but
rejected waiting for an actual device that makes use of them.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The NetCube Systems Kumquat is an Embedded Controller based on the
Allwinner V3s SoC. It is intended for Smart Home or Industrial automation
without the need for a traditional PLC
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250205164716.2509650-3-lukas.schmid@netcube.li
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
NetCube Systems Austria builds Embedded Systems for use in IoT, IIoT, or
Smart Home scenarios.
Website is still WIP, but the Links on it are active:
https://netcubesystems.at/
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250205164716.2509650-2-lukas.schmid@netcube.li
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add support for selecting between single-ended and differential
reference input.
Input frequency boundaries are change based on the mode selected
(single-ended/differential).
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250127101026.5320-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device tree bindings for APDS9160
Note: Using alternate email for maintainer
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250122-apds9160-driver-v5-1-5393be10279a@dimonoff.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Silicon Labs Si7210 is an I2C Hall effect magnetic position
and temperature sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://patch.msgid.link/20250120215620.39766-2-apokusinski01@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AXI SPI Engine has support for hardware offloading capabilities.
This includes a connection to a DMA controller for streaming RX or TX
data and a trigger input for starting execution of the SPI message
programmed in the offload. It is designed to support up to 32 offload
instances.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-6-e48a489be48c@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new binding for using a PWM signal as a trigger source.
The idea here is similar to e.g. "pwm-clock" to allow a trigger source
consumer to use a PWM provider as a trigger source.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-3-e48a489be48c@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new compatible for the panel CSOT PNA957QT1-1. This panel uses
HX83102 IC, so add the compatible to the hx83102 binding files.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206131300.1295111-3-yelangyan@huaqin.corp-partner.google.com
|
|
Add "csot" to the Devicetree Vendor Prefix Registry.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206131300.1295111-2-yelangyan@huaqin.corp-partner.google.com
|
|
Device specific schemas should not allow undefined properties which is
what 'unevaluatedProperties: true' allows. Fix this constraint.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Introduce support for Qualcomm new video acceleration hardware i.e.
iris, used for video stream decoding and encoding on QCOM SM8550 SoC.
Cc: devicetree@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>:
Add static channel map support between soundwire master and slave.
Currently, the channel value for each soundwire port is hardcoded in the
wcd937x-sdw driver and the same channel value is configured in the
soundwire master.
The Qualcomm board like the QCM6490-IDP require static channel map
settings for the soundwire master and slave ports.
If another boards which are using enable wcd937x, the channel mapping
index values between master and slave may be different depending on the
board hw design and requirements. If the above properties are not used
in a SoC specific device tree, the channel mapping index values are set
to default.
With the introduction of the following channel mapping properties, it is
now possible to configure the master channel mapping directly from the
device tree.
Added qcom_swrm_set_channel_map api to set the master channel values
which allows more flexible to configure channel values in runtime for
specific active soundwire ports.
Add get and set channel maps support from codec to cpu dais in common
Qualcomm sdw driver.
|
|
Merge series from Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>:
cpcap audio codec found on cpcap PMIC supports headset detection
and PTT button through its 3.5 mm jack. This series implements
support for those capabilities.
|
|
I'm stepping down as ath10k, ath11k and ath12k maintainer so remove me from
MAINTAINERS file and Device Tree bindings. Jeff continues as the maintainer.
As my quicinc.com email will not work anymore so add an entry to .mailmap file
to direct the mail to my kernel.org address.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250203180445.1429640-1-kvalo@kernel.org
|
|
Add bindings for qcom,sm8550-camss in order to support the camera
subsystem for sm8550.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Update clock names to make them consistent with existing platform i.e
qcom,sc8280xp-camss.yaml. Rename gcc_cam_hf_axi to gcc_axi_hf and add
gcc_axi_sf.
gcc_camera_ahb is always on and we don't need to enable it explicitly.
gcc_axi_sf is added to avoid unexpected hardware behaviour.
This change will not break ABI because the ABI hasn't been cemented yet as
the dtsi changes are not merged yet and there are no users for this driver
as of now.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Bring rc1 to start the new release dev.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add static channel mapping between master and slave rx/tx ports for
Qualcomm wcd937x soundwire codec.
Currently, the channel map index value for each soundwire port is
hardcoded in the wcd937x-sdw driver, and the same channel map index
value is configured in the soundwire master.
The Qualcomm board like the QCM6490-IDP require static channel map
settings for the soundwire master and slave ports.
If another boards which are using enable wcd937x, the channel mapping
index values between master and slave may be different depending on the
board hw design and requirements. If the above properties are not used
in a SoC specific device tree, the channel mapping index values are set
to default.
With the introduction of the following channel mapping properties, it is
now possible to configure the master channel mapping directly from the
device tree.
The qcom,tx-channel-mapping property specifies the static channel mapping
between the slave and master tx ports in the order of slave port channels
which is adc1, adc2, adc3, adc4, dmic0, dmic1, mbhc, dmic2, dmic3, dmci4,
dmic5, dmic6, dmic7.
The qcom,rx-channel-mapping property specifies the static channel mapping
between the slave and master rx ports in the order of slave port channels
which is hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250206112225.3270400-2-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
1. Add compatible for MT8370.
2. Add bindings for the MediaTek mt8370-evk board, also known
as the "Genio 510-EVK".
The MT8370, MT8390 and MT8188 belong to the same SoC family.
It is a less powerful variant of MT8390 SoC and their main
differences are:
- Arm Cortex-A55 cores number (4 vs 6)
- Arm Cortex-A78 core speed (2.0 GHz vs 2.2 Ghz)
- Arm Mali-G57 GPU core number (2 vs 3)
Like MT8390, MT8370 hardware register maps are identical to MT8188.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250206-dts_mt8370-genio-510-v3-1-5ca5c3257a4c@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
On RK3588, HDMI PHY PLL can be used as an alternative and more accurate
pixel clock source for VOP2 video ports 0, 1 and 2.
Document the optional PLL clock properties corresponding to the two HDMI
PHYs available on the SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204-vop2-hdmi0-disp-modes-v3-1-d71c6a196e58@collabora.com
|
|
TX Controller
The hdptxphy is a combo transmit-PHY for HDMI2.1 TMDS Link, FRL Link, DP
and eDP Link. Therefore, it is better to name it hdptxphy0 other than
hdptxphy_hdmi0, which will be referenced by both hdmi0 and edp0 nodes.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206030330.680424-2-damon.ding@rock-chips.com
|
|
This reverts commit ed333392bd201e71a010e588e61605a1e2dd07df.
It was part of a patch series that caused build errors in linux-next.
Cc: Benjamin Larsson <benjamin.larsson@genexis.eu>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20250206135328.4bad1401@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the ti,omap4-panda-a4 compatible string in the appropriate
place within the omap family binding file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250123174901.1182176-1-trini@konsulko.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
