| Age | Commit message (Collapse) | Author | Files | Lines |
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.15
1. HDMI fixup and refinement
2. Move to devm_platform_ioremap_resource() usage
3. Add MT8188 dsc compatible
4. Fix config_updating flag never false when no mbox channel
5. dp: drm_err => dev_err in HPD path to avoid NULL ptr
6. Add dpi power-domains example
7. Add MT8365 SoC support
8. Fix error codes in mtk_dsi_host_transfer()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312232909.9304-1-chunkuang.hu@kernel.org
|
|
Merge series from Maud Spierings <maudspierings@gocontroll.com>:
Add inital support for 2 variants of the Moduline Display controller
module slot. This system is powered by the Ka-Ro Electronics tx8p-ml81
COM, which features an imx8mp SoC.
|
|
Merge series from Ryan Walklin <ryan@testtoast.com>:
Hi All,
V3 of this patch adding headphone jack detection support to the Anbernic RGnnXX series of handhelds. V3 corrects my misunderstanding of derivation of ALSA UCM file paths, and adds recieved Reviewed-by and Tested-by tags. Thanks to those that have reviewed and fed back on previous versions.
Original message below:
This series adds the required device tree bindings to describe GPIOs for jack detection in the sun4i-codec driver, adds support for jack detection to the codec machine driver, and describes the hardware configuration in the RG35XX DTS. The existing speaker amplifier GPIO pin can then be used in concert with jack detection to enable userspace sound servers (via an ALSA UCM configuration) to disable the speaker route when headphones are connected.
Thanks to Chris Morgan for his assistance putting this series together.
Regards,
Ryan
Chris Morgan (2):
ASoC: dt-bindings: sun4i-a10-codec: add hp-det-gpios
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
Ryan Walklin (3):
ASoC: sun4i-codec: correct dapm widgets and controls for h616
ASoC: sun4i-codec: support hp-det-gpios property
ASoC: sun4i-codec: add h616 card long_name
.../sound/allwinner,sun4i-a10-codec.yaml | 6 ++
.../sun50i-h700-anbernic-rg35xx-2024.dts | 5 +-
sound/soc/sunxi/sun4i-codec.c | 57 ++++++++++++++++++-
3 files changed, 66 insertions(+), 2 deletions(-)
--
2.48.1
|
|
The driver support more SoCs. Add the missing ones.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250213092728.11659-2-wsa+renesas@sang-engineering.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
MT7988 has 2 different spi controllers. Add their compatibles.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241109105029.52748-1-linux@fw-web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add remote processor PAS loader for SM8750 MPSS (modem). Device looks
fully compatible with SM8650, however it lacks fifth memory region for
Qlink Logging, according to downstream sources. This is a bit tricky,
because updated downstream sources for newer downstream release dropped
that fifth memory region as well.
There might be other differences against SM8650, because the modem
currently crashes after starting.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221160300.160404-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible for "qcom,msm8916-acc", used in msm8916.dtsi, to the dt
schema.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710155226.130086-1-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Devices integrating Allwinner SoCs may use line-out or headphone jacks
with jack detection circuits attached to a GPIO. Support defining these
in DTs.
A number of Anbernic devices featuring the H700 SoC use this mechanism
to switch between a headphone jack and an internal speaker, so add these
to the allowed routing items.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
--
Changelog v1..v2:
- Remove vendor prefix from hp-det-gpios
Changelog v2..v3:
- Add Reviewed-by tag
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-2-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the bindings that describe a GOcontroll Moduline module slot. This
slot provides all the interfaces to interface with a Moduline compatible
IO module. The actual module is not reasonable to describe as it can be
swapped at will, with this connector the driver will be able to probe
for a module on boot.
The connector consists of 2 parts, one part for interfacing with the SoC
and main board, the other part has 13 IO channels for the module to
interact with the outside world. The functions of these IO channels are
determined by the type of module in the slot. The IO on the SoC side is
as follows:
- a 3v3 supply, this tends to be the logic level of the module and its
microcontroller
- a 5v0 supply, this can be used to power low power peripherals on the
module
- a 6v-8v supply, this can be used for high power peripherals on the
module
- a 6v-30v supply, this tends to be a dirty supply that comes from the
controller supply after some circuit protection, or is the same as
the 6v-8v supply.
- an SPI bus which carries the communication between the SoC and the
microcontroller on the module.
- an I2C bus shared between the SoC and all module slots which can
carry direct module-to-module communication.
- a reset line
- an interrupt line that indicates a clear to transmit signal
- a sync line shared between the SoC and all module slots which could
be used to synchronize modules for time sensitive IO spread across
modules.
- a SMBus alert line that is shared between the modules but is not
connected to the SoC so that is ignored.
A slot-number property is used to identify the physical location of a
module slot. Without it, it would be impossible to identify which module
to control if there are multiple of one type, to address the desired IO.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-3-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
GOcontroll produces embedded linux systems and IO modules to use in
these systems, add its prefix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-2-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A variant of TAS2770 known as TAS5770L is found in Apple Silicon Macs.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-2-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The TI SN012776 is a variant of TAS2764 found in Apple Silicon Macs.
It continues Apple's long-standing policy of getting vendors to
spin out subtly incompatible and Apple-exclusive variants of their
publicly available parts.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-1-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the Xiaomi Redmi Note 8 (codenamed ginkgo),
which is based off the SM6125 SoC.
Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250311003353.8250-2-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add the new QCM6490 compatible to support the reset functionality for
Low Power Audio subsystem.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250221-lpass_qcm6490_resets-v5-1-6be0c0949a83@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the TI clkctrl clock device tree binding to json-schema.
Specify the creator of the original binding as a maintainer.
reg property is used mostly with one item, in am3xxx also with
an arbitrary number of items, so divert from the original binding
specifying two (probably meaning one address and one size).
The consumer part of the example is left out because the full consumer
node would be needed.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250311180215.173634-1-andreas@kemnade.info
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Assert and deassert functionality of the DSP found on i.MX8MP is
realized by combining control bits from two modules: Audio Block
Control and Debug Access Port.
Audio block control bits are used to Run/Stall the DSP core
while the DAP bits are used for software reset the core.
The original plan was to use fsl,dsp-ctrl property and to refer the
audiomix bits via syscon interface. This proposal received NACK from
community we shouldn't abuse the syscon interface [1].
So remove fsl,dsp-ctrl property for i.MX8MP and use reset control
interface instead.
Example dts node only uses runstall control now, but softreset will
be added in the future when we will convert the softreset functionality
to use reset controller API.
[1] https://patchwork.kernel.org/project/imx/patch/20250212085222.107102-6-daniel.baluta@nxp.com/
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-3-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The A523 contains a pin controller similar to previous SoCs, although
using 10 GPIO banks (PortB-PortK), all of them being IRQ capable.
With this SoC we introduce a new style of binding, where the pinmux values
for each pin group are stored in the new "allwinner,pinmux" property in
the DT node, instead of requiring every driver to store a mapping between
the function names and the required pinmux.
Add a new binding file, since all the different variants of the old
binding are making the file a bit unwieldy to handle already, and the new
property would make the situation worse.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250306235827.4895-7-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The kernel communicates with the E902 core through the mailbox
transport using AON firmware protocol. Add dt-bindings to document it
the dt node.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250311171900.1549916-2-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
S2MPU05 is a PMIC found in Exynos7870 devices, which controls voltage
regulators (21 LDOs and 5 BUCKs). Provide documentation for devicetree
definitions, regulator naming patterns, etc.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-1-808d0b47a564@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The `snps,dwmac.yaml` binding currently sets `maxItems: 3` for the
`interrupts` and `interrupt-names` properties, but vendor bindings
selecting `snps,dwmac.yaml` do not impose these limits.
Define constraints for `interrupts` and `interrupt-names` properties in
various DWMAC vendor bindings to ensure proper validation and consistency.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/20250309003301.1152228-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All Rockchip GMAC variants typically write to GRF regs to control e.g.
interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3562,
RK3576 and RK3588 use a mix of GRF and peripheral GRF regs.
Prior to the commit b331b8ef86f0 ("dt-bindings: net: convert
rockchip-dwmac to json-schema") the property rockchip,grf was listed
under "Required properties". During the conversion this was lost and
rockchip,grf has since then incorrectly been treated as optional and
not as required.
Similarly, when rockchip,php-grf was added to the schema in the
commit a2b77831427c ("dt-bindings: net: rockchip-dwmac: add rk3588 gmac
compatible") it also incorrectly has been treated as optional for all
GMAC variants, when it should have been required for RK3588, and later
also for RK3576.
Update this binding to require rockchip,grf and rockchip,php-grf to
properly reflect that GRF (and peripheral GRF for RK3576/RK3588) is
required to control part of GMAC.
This should not introduce any breakage as all Rockchip GMAC nodes have
been added together with a rockchip,grf phandle (and rockchip,php-grf
where required) in their initial commit.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250308213720.2517944-2-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
System Controller Firmware(SCU) reset some peripherals, such as CSI. So add
reset-controller for it.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250210-8qxp_camera-v3-1-324f5105accc@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add documentation for SAM9X7 reset controller.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20241010120419.93043-1-varshini.rajendran@microchip.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
DPI is part of the display / multimedia block in MediaTek SoCs, and
always have a power-domain (at least in the upstream device-trees).
Add the power-domains property to the binding example.
Fixes: 9273cf7d3942 ("dt-bindings: display: mediatek: convert the dpi bindings to yaml")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231023-display-support-v7-1-6703f3e26831@baylibre.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add new entry for stm32mp215-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-9-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add new entry for stm32mp235-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-6-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add the new syscon compatibles for STM32MP21 syscfg = "st,stm32mp21-syscfg"
and for STM32MP23 syscfg = "st,stm32mp23-syscfg".
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-4-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add new entry for stm32mp257f-dk board.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250225-b4-stm32mp2_new_dts-v2-1-1a628c1580c7@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Document the support for the watchdog IP available on RZ/G3E SoC. The
watchdog IP available on RZ/G3E SoC is identical to the one found on
RZ/V2H SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250126132633.31956-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The Allwinner A523 uses the same MMC IP as the D1.
Introduce the new specific compatible strings, and use them with
fallbacks to the D1 strings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250307005712.16828-3-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
New Allwinner SoCs only occasionally update their MMC IP, leading to many
pairs of compatible strings, though there are sometimes a number of them
being compatible with one particular SoC.
Collate the compatible string listing in the binding, to group those
being compatible together. This makes the list more readable, and allows
for easier addition of new SoC's MMC devices.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250307005712.16828-2-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SDHCI controller in Rockchip RK3528 is similar to the one included
in RK3588.
Add compatible string for the SDHCI controller in RK3528.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250305214108.1327208-2-jonas@kwiboo.se
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add RK3528 compatible string for SD/SDIO interface.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250309055348.9299-2-ziyao@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The SD/MMC block on the RZ/G3E ("R9A09G047") SoC is similar to that
of the RZ/V2H, but the SD0 channel has only dedicated pins, so we must
use SD_STATUS register to control voltage and power enable (internal
regulator), for non-fixed voltage (SD) MMC interface. However, it is
optional for fixed voltage MMC interface (eMMC).
For SD1 and SD2 channels, we can either use gpio regulator or internal
regulator (using SD_STATUS register) for voltage switching.
Document RZ/G3E SDHI IP support with optional internal regulator for
both RZ/G3E and RZ/V2H SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250305092958.21865-2-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The dw-mshc core on Rockchip's RK3562 is the same as the one already
included in RK3288. Extend the binding accordingly to allow
compatible = "rockchip,rk3562-dw-mshc", "rockchip,rk3288-dw-mshc";
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227111913.2344207-4-kever.yang@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The eMMC core on Rockchip's RK3562 is the same as the one already
included in RK3588. Extend the binding accordingly to allow
compatible = "rockchip,rk3562-dwcmshc", "rockchip,rk3588-dwcmshc";
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227111913.2344207-3-kever.yang@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add POWERTIP PH128800T004-ZZA01 10.1" LCD-TFT LVDS panel compatible
string.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311-add-powertip-ph128800t004-v1-1-7f95e6984cea@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
The Allwinner A523/T527 SoCs have four CCUs, this adds the binding for
the main and the PRCM R-CCU.
The source clock list differs in some annoying details, and folding this
into the existing Allwinner CCU clock binding document gets quite
unwieldy, so create a new document for these CCUs.
Add the new compatible string, along with the required input clock
lists. This conditionally describes the input clock lists, to make
adding support for the other two CCUs easier.
Also add the DT binding headers, listing all the clocks with their ID
numbers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250307002628.10684-5-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The Maxim max15301, max15303, and max20751 devices are all simple PMBus
devices already in use, but have not been documented.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250307230907.840875-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The "ibm,fsi2pib" compatible was originally in the binding, but it
changed to "ibm,p9-scom" in the end. However, both compatibles are in
use, so just support both.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250307230822.832936-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
This is a backmerge from Linux 6.14-rc6, needed for the nova PR.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add compatible string "nxp,imx94-adc" and "nxp,imx95-adc", which is
backward compatible with i.MX93. Set it to fall back to "nxp,imx93-adc".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250306170825.239933-1-Frank.Li@nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
AD7191 is a pin-programmable, ultra-low noise 24-bit sigma-delta ADC
designed for precision bridge sensor measurements. It features two
differential analog input channels, selectable output rates,
programmable gain, internal temperature sensor and simultaneous
50Hz/60Hz rejection.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Lechner<dlechner@baylibre.com>
Link: https://patch.msgid.link/20250228141327.262488-2-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Convert atmel,hsmci documentation to yaml format. The new file will inherit
from mmc-controller.yaml.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250224-mmc-slot-v4-2-231620a31e88@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The compatible property is required for some vendor-specific device trees,
such as Amlogic's meson-mx-sdio, but is unnecessary for others, like
Microchip's DTS. To resolve unintended warnings for configurations that do
not require it, remove compatible from the required properties in
mmc-slot.yaml.
Since meson-mx-sdio still requires compatible, explicitly add it to its
required list in amlogic,meson-mx-sdio.yaml.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250224-mmc-slot-v4-1-231620a31e88@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add compatible string "fsl,imx94-usdhc" for the i.MX94 chip, which is
backward compatible with i.MX8mm. Set it to fall back to
"fsl,imx8mm-usdhc".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250306170937.242183-1-Frank.Li@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Unevaluated property
mmc-controller.yaml is common schema file. According to writing-schema.rst,
* additionalProperties: true
Rare case, used for schemas implementing common set of properties. Such
schemas are supposed to be referenced by other schemas, which then use
'unevaluatedProperties: false'. Typically bus or common-part schemas.
Reproduce steps:
1. Add unevaluated property 'abc' at example of fsl-imx-esdhc.yaml
2. Run make dt_binding_check DT_SCHEMA_FILES=fsl-imx-esdhc.yaml
No any warning report. But suppose report below warning:
mmc@70004000: Unevaluated properties are not allowed ('abc' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250220164655.2081224-1-Frank.Li@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the compatibles for Exynos7870's DW MMC driver, for both
non-SMU and SMU variants.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250219-exynos7870-mmc-v2-1-b4255a3e39ed@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Xilinx Versal Net series has Coherency and PCIe Gen5 Module
Next-Generation compact (CPM5NC) block which supports Root Port
controller functionality at Gen5 speed.
Error interrupts are handled, CPM5NC specific interrupt line and
the INTx interrupt is not support.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250224155025.782179-3-thippeswamy.havalige@amd.com
|