| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat scatters over the tree, we've got many tree-wide small
changes, but also got quite a few intrusive changes in the core side.
The only ABI-visible core change is the new rawmidi framing mode
support while others are kernel-internal, mostly code refactoring
and/or nice improvements.
Here are some highlights:
Core:
- A new framing access mode for rawmidi to get timestamps
- Cleanup / refactoring of buffer memory management helper code
- Support for automatic negotiation of ASoC DAI formats
- Revival of software suspend for PCM and control core, as a
preliminary work for PCI BAR rescan support
ASoC:
- Accessory detection support for several Qualcomm parts
- Support for IEC958 control with hdmi-codec
- Merging of Tegra machine drivers into a single driver
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
USB-audio:
- Reduction of latency at playback start
- Code cleanup / fixes of usx2y driver
- Scarlett2 mixer code fixes and enhancements
- Quirks for Ozone and Denon devices
HD-audio:
- A few quirks for HP and ASUS machines
- Display power management fixes
Others:
- FireWire code refactoring and enhancements
- Tree-wide trivial coding-style fixes"
* tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
ALSA: usb-audio: scarlett2: Fix for loop increment in scarlett2_usb_get_config
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
ALSA: hda/realtek - Add ALC285 HP init procedure
ALSA: hda/realtek - Add type for ALC287
ALSA: scarlett2: Fix scarlett2_*_ctl_put() return values again
ALSA: scarlett2: Fix pad count for 18i8 Gen 3
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
ALSA: hda: Release codec display power during shutdown/reboot
ALSA: hda: Release controller display power during shutdown/reboot
ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
ASoC: fsl: remove unnecessary oom message
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tegra30: ahub: Use devm_platform_get_and_ioremap_resource()
ASoC: tegra: tegra210_admaif: Use devm_platform_get_and_ioremap_resource()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- SMMU Updates from Will Deacon:
- SMMUv3:
- Support stalling faults for platform devices
- Decrease defaults sizes for the event and PRI queues
- SMMUv2:
- Support for a new '->probe_finalize' hook, needed by Nvidia
- Even more Qualcomm compatible strings
- Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU
available on x86
- Add the amd_iommu=force_enable command line option to enable
the IOMMU on platforms where they are known to cause problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu/virtio: Enable x86 support
iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
ACPI: Add driver for the VIOT table
ACPI: Move IOMMU setup code out of IORT
ACPI: arm64: Move DMA setup operations out of IORT
iommu/vt-d: Fix dereference of pointer info before it is null checked
iommu: Update "iommu.strict" documentation
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu-v3: Remove unnecessary oom message
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/vt-d: Fix linker error on 32-bit
iommu/vt-d: No need to typecast
iommu/vt-d: Define counter explicitly as unsigned int
iommu/vt-d: Remove unnecessary braces
iommu/vt-d: Removed unused iommu_count in dmar domain
iommu/vt-d: Use bitfields for DMAR capabilities
iommu/vt-d: Use DEVICE_ATTR_RO macro
iommu/vt-d: Fix out-bounds-warning in intel/svm.c
iommu/vt-d: Add PRQ handling latency sampling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- add support for OpeneEmbed SOM9331 board
- Ingenic fixes/improvments
- other fixes and cleanups
* tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits)
MIPS: Fix PKMAP with 32-bit MIPS huge page support
MIPS: CI20: Add second percpu timer for SMP.
MIPS: CI20: Reduce clocksource to 750 kHz.
MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs.
dt-bindings: clock: Add documentation for MAC PHY control bindings.
MIPS: X1830: Respect cell count of common properties.
MIPS: set mips32r5 for virt extensions
MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops
MIPS: MT extensions are not available on MIPS32r1
mips/kvm: Use BUG_ON instead of if condition followed by BUG
MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource()
MIPS: add PMD table accounting into MIPS'pmd_alloc_one
MIPS: Loongson64: fix spelling of SPDX tag
MIPS: ingenic: rs90: Add dedicated VRAM memory region
MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio
MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc
MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs
MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B)
MIPS: boot: Support specifying UART port on Ingenic SoCs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.14 kernel. Not so
much going on. No core changes, just drivers.
The most interesting would be that MIPS Ralink is migrating to pin
control and we have some bindings but not yet code for the Apple M1
pin controller.
New drivers:
- Last merge window we created a driver for the Ralink RT2880. We are
now moving the Ralink SoC pin control drivers out of the MIPS
architecture code and into the pin control subsystem. This concerns
RT288X, MT7620, RT305X, RT3883 and MT7621.
- Qualcomm SM6125 SoC pin control driver.
- Qualcomm spmi-gpio support for PM7325.
- Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)
- Mediatek MT8365 SoC pin controller.
- New device HID for the AMD GPIO controller.
Improvements:
- Pin bias config support for a slew of Renesas pin controllers.
- Incremental improvements and non-urgent bug fixes to the Renesas
SoC drivers.
- Implement irq_set_wake on the AMD pin controller so we can wake up
from external pin events.
Misc:
- Devicetree bindings for the Apple M1 pin controller, we will
probably see a proper driver for this soon as well"
* tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits)
pinctrl: ralink: rt305x: add missing include
pinctrl: stm32: check for IRQ MUX validity during alloc()
pinctrl: zynqmp: some code cleanups
drivers: qcom: pinctrl: Add pinctrl driver for sm6125
dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios
pinctrl: mcp23s08: Add optional reset GPIO
pinctrl: mediatek: fix mode encoding
pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()
pinctrl: bcm: Constify static pinmux_ops
pinctrl: bcm: Constify static pinctrl_ops
pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file
pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file
pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file
pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file
pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file
pinctrl: ralink: move ralink architecture pinmux header into the driver
pinctrl: single: config: enable the pin's input
pinctrl: mtk: Fix mt8365 Kconfig dependency
pinctrl: mcp23s08: fix race condition in irq handler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round has a diffstat dominated by Qualcomm clk drivers. Honestly
though that's just a bunch of data so the diffstat reflects that.
Looking beyond that there's just a bunch of updates all around in
various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
that have a lot of patches in here.
Overall the driver changes look to be mostly enabling more clks and
non-critical fixes that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates
clkdev to be the only implementation of clk_get() and clk_put().
That's a good step in the right direction to migreate eveerything over
to the common clk framework. Now we don't have to worry about clkdev
specific details, they're just part of the clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is
implemented in only one place in the kernel instead of in
drivers/clk/clkdev.c and in architectures that want their own
implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
Clock Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of
round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
audio, parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
clk: zynqmp: Handle divider specific read only flag
clk: zynqmp: Use firmware specific mux clock flags
clk: zynqmp: Use firmware specific divider clock flags
clk: zynqmp: Use firmware specific common clock flags
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: hisilicon: Add clock driver for hi3559A SoC
dt-bindings: Document the hi3559a clock bindings
clk: si5341: Add sysfs properties to allow checking/resetting device faults
clk: si5341: Add silabs,iovdd-33 property
clk: si5341: Add silabs,xaxb-ext-clk property
clk: si5341: Allow different output VDD_SEL values
clk: si5341: Update initialization magic
clk: si5341: Check for input clock presence and PLL lock on startup
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD enables two more GPUs, with resulting header files
- i915 has started to move to TTM for discrete GPU and enable DG1
discrete GPU support (not by default yet)
- new HyperV drm driver
- vmwgfx adds arm64 support
- TTM refactoring ongoing
- 16bpc display support for AMD hw
Otherwise it's just the usual insane amounts of work all over the
place in lots of drivers and the core, as mostly summarised below:
Core:
- mark AGP ioctls as legacy
- disable force probing for non-master clients
- HDR metadata property helpers
- HDMI infoframe signal colorimetry support
- remove drm_device.pdev pointer
- remove DRM_KMS_FB_HELPER config option
- remove drm_pci_alloc/free
- drm_err_*/drm_dbg_* helpers
- use drm driver names for fbdev
- leaked DMA handle fix
- 16bpc fixed point format fourcc
- add prefetching memcpy for WC
- Documentation fixes
aperture:
- add aperture ownership helpers
dp:
- aux fixes
- downstream 0 port handling
- use extended base receiver capability DPCD
- Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
- mst: use khz as link rate during init
- VCPI fixes for StarTech hub
ttm:
- provide tt_shrink file via debugfs
- warn about freeing pinned BOs
- fix swapping error handling
- move page alignment into BO
- cleanup ttm_agp_backend
- add ttm_sys_manager
- don't override vm_ops
- ttm_bo_mmap removed
- make ttm_resource base of all managers
- remove VM_MIXEDMAP usage
panel:
- sysfs_emit support
- simple: runtime PM support
- simple: power up panel when reading EDID + caching
bridge:
- MHDP8546: HDCP support + DT bindings
- MHDP8546: Register DP AUX channel with userspace
- TI SN65DSI83 + SN65DSI84: add driver
- Sil8620: Fix module dependencies
- dw-hdmi: make CEC driver loading optional
- Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
- It66121: Add driver + DT bindings
- Adv7511: Support I2S IEC958 encoding
- Anx7625: fix power-on delay
- Nwi-dsi: Modesetting fixes; Cleanups
- lt6911: add missing MODULE_DEVICE_TABLE
- cdns: fix PM reference leak
hyperv:
- add new DRM driver for HyperV graphics
efifb:
- non-PCI device handling fixes
i915:
- refactor IP/device versioning
- XeLPD Display IP preperation work
- ADL-P enablement patches
- DG1 uAPI behind BROKEN
- disable mmap ioctl for discerte GPUs
- start enabling HuC loading for Gen12+
- major GuC backend rework for new platforms
- initial TTM support for Discrete GPUs
- locking rework for TTM prep
- use correct max source link rate for eDP
- %p4cc format printing
- GLK display fixes
- VLV DSI panel power fixes
- PSR2 disabled for RKL and ADL-S
- ACPI _DSM invalid access fixed
- DMC FW path abstraction
- ADL-S PCI ID update
- uAPI headers converted to kerneldoc
- initial LMEM support for DG1
- x86/gpu: add Jasperlake to gen11 early quirks
amdgpu:
- Aldebaran updates + initial SR-IOV
- new GPU: Beige Goby and Yellow Carp support
- more LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- PCIe ASPM support
- Renoir TMZ enablement
- initial multiple eDP panel support
- use fdinfo to track devices/process info
- pin/unpin TTM fixes
- free resource on fence usage query
- fix fence calculation
- fix hotunplug/suspend issues
- GC/MM register access macro cleanup for SR-IOV
- W=1 fixes
- ACPI ATCS/ATIF handling rework
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes
- new INFO query for additional vbios info
amdkfd:
- SR-IOV aldebaran support
- HMM SVM support
radeon:
- SMU regression fixes
- Oland flickering fix
vmwgfx:
- enable console with fbdev emulation
- fix cpu updates of coherent multisample surfaces
- remove reservation semaphore
- add initial SVGA3 support
- support arm64
msm:
- devcoredump support for display errors
- dpu/dsi: yaml bindings conversion
- mdp5: alpha/blend_mode/zpos support
- a6xx: cached coherent buffer support
- gpu iova fault improvement
- a660 support
rockchip:
- RK3036 win1 scaling support
- RK3066/3188 missing register support
- RK3036/3066/3126/3188 alpha support
mediatek:
- MT8167 HDMI support
- MT8183 DPI dual edge support
tegra:
- fixed YUV support/scaling on Tegra186+
ast:
- use pcim_iomap
- fix DP501 EDID
bochs:
- screen blanking support
etnaviv:
- export more GPU ID values to userspace
- add HWDB entry for GPU on i.MX8MP
- rework linear window calcs
exynos:
- pm runtime changes
imx:
- Annotate dma_fence critical section
- fix PRG modifiers after drmm conversion
- Add 8 pixel alignment fix for 1366x768
- fix YUV advertising
- add color properties
ingenic:
- IPU planes fix
panfrost:
- Mediatek MT8183 support + DT bindings
- export AFBC_FEATURES register to userspace
simpledrm:
- %pr for printing resources
nouveau:
- pin/unpin TTM fixes
qxl:
- unpin shadow BO
virtio:
- create dumb BOs as guest blob
vkms:
- drmm_universal_plane_alloc
- add XRGB plane composition
- overlay support"
* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
drm/i915: Reinstate the mmap ioctl for some platforms
drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
Revert "drm/msm/mdp5: provide dynamic bandwidth management"
drm/msm/mdp5: provide dynamic bandwidth management
drm/msm/mdp5: add perf blocks for holding fudge factors
drm/msm/mdp5: switch to standard zpos property
drm/msm/mdp5: add support for alpha/blend_mode properties
drm/msm/mdp5: use drm_plane_state for pixel blend mode
drm/msm/mdp5: use drm_plane_state for storing alpha value
drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
drm/msm: Add debugfs to trigger shrinker
drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
drm/msm: devcoredump iommu fault support
iommu/arm-smmu-qcom: Add stall support
drm/msm: Improve the a6xx page fault handler
iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
iommu/arm-smmu: Add support for driver IOMMU fault handlers
drm/msm: export hangcheck_period in debugfs
drm/msm/a6xx: add support for Adreno 660 GPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- imx: add support for i.MX8ULP
- mtk: code change around callback struct
- qcom: add sm6125, MSM8939 fix for channel exhaustion
- microchip: add support for polarfire controller
- misc: cosmetic changes to bcm-2835,flexrm,pdc, arm-mhu and hisilicon
* tag 'mailbox-v5.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (26 commits)
MAINTAINERS: add entry for polarfire soc mailbox
dt-bindings: add bindings for polarfire soc system controller
mbox: add polarfire soc system controller mailbox
dt-bindings: add bindings for polarfire soc mailbox
mailbox: imx: Avoid using val uninitialized in imx_mu_isr()
mailbox: qcom: Add MSM8939 APCS support
mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
dt-bindings: mailbox: qcom: Add MSM8939 APCS compatible
mailbox: qcom-apcs: Add SM6125 compatible
dt-bindings: mailbox: Add binding for sm6125
mailbox: mtk-cmdq: Fix uninitialized variable in cmdq_mbox_flush()
mailbox: bcm-flexrm-mailbox: Remove redundant dev_err call in flexrm_mbox_probe()
mailbox: bcm2835: Remove redundant dev_err call in bcm2835_mbox_probe()
mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
mailbox: mtk-cmdq: Add struct cmdq_pkt in struct cmdq_cb_data
mailbox: mtk-cmdq: Use mailbox rx_callback
mailbox: mtk-cmdq: Remove cmdq_cb_status
mailbox: imx-mailbox: support i.MX8ULP MU
mailbox: imx: add xSR/xCR register array
mailbox: imx: replace the xTR/xRR array with single register
...
|
|
Pull IPMI driver updates from Corey Minyard:
"Mostly a restructure of the kcs_bmc driver to make it easier to use
with different types of devices, and just to clean things up and
improve things.
Also some bug fixes for the kcs_bmc driver.
One fix to the IPMI watchdog to stop the timer when the action is
none. Not a big deal, but it's the right thing to do"
* tag 'for-linus-5.14-1' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned int
ipmi: kcs_bmc_aspeed: Optionally apply status address
ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
dt-bindings: ipmi: Convert ASPEED KCS binding to schema
ipmi: kcs_bmc: Add serio adaptor
ipmi: kcs_bmc: Enable IBF on open
ipmi: kcs_bmc: Allow clients to control KCS IRQ state
ipmi: kcs_bmc: Decouple the IPMI chardev from the core
ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
ipmi: kcs_bmc: Split headers into device and client
ipmi: kcs_bmc: Turn the driver data-structures inside-out
ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
ipmi: kcs_bmc: Make status update atomic
ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
ipmi/watchdog: Stop watchdog timer when the current action is 'none'
|
|
Update the CGU binding documentation, add mac-phy-ctrl as a
pattern property.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add hybrid processors support to the intel_pstate driver and
make it work with more processor models when HWP is disabled, make the
intel_idle driver use special C6 idle state paremeters when package
C-states are disabled, add cooling support to the tegra30 devfreq
driver, rework the TEO (timer events oriented) cpuidle governor,
extend the OPP (operating performance points) framework to use the
required-opps DT property in more cases, fix some issues and clean up
a number of assorted pieces of code.
Specifics:
- Make intel_pstate support hybrid processors using abstract
performance units in the HWP interface (Rafael Wysocki).
- Add Icelake servers and Cometlake support in no-HWP mode to
intel_pstate (Giovanni Gherdovich).
- Make cpufreq_online() error path be consistent with the CPU device
removal path in cpufreq (Rafael Wysocki).
- Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
Randy Dunlap, Shaokun Zhang).
- Make intel_idle use special idle state parameters for C6 when
package C-states are disabled (Chen Yu).
- Rework the TEO (timer events oriented) cpuidle governor to address
some theoretical shortcomings in it (Rafael Wysocki).
- Drop unneeded semicolon from the TEO governor (Wan Jiabing).
- Modify the runtime PM framework to accept unassigned suspend and
resume callback pointers (Ulf Hansson).
- Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).
- Improve device performance states support in the generic power
domains (genpd) framework (Ulf Hansson).
- Fix some documentation issues in genpd (Yang Yingliang).
- Make the operating performance points (OPP) framework use the
required-opps DT property in use cases that are not related to
genpd (Hsin-Yi Wang).
- Make lazy_link_required_opp_table() use list_del_init instead of
list_del/INIT_LIST_HEAD (Yang Yingliang).
- Simplify wake IRQs handling in the core system-wide sleep support
code and clean up some coding style inconsistencies in it (Tian
Tao, Zhen Lei).
- Add cooling support to the tegra30 devfreq driver and improve its
DT bindings (Dmitry Osipenko).
- Fix some assorted issues in the devfreq core and drivers (Chanwoo
Choi, Dong Aisheng, YueHaibing)"
* tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
PM / devfreq: passive: Fix get_target_freq when not using required-opp
cpufreq: Make cpufreq_online() call driver->offline() on errors
opp: Allow required-opps to be used for non genpd use cases
cpuidle: teo: remove unneeded semicolon in teo_select()
dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
dt-bindings: devfreq: tegra30-actmon: Convert to schema
PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
PM: runtime: Clarify documentation when callbacks are unassigned
PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
PM: runtime: Improve path in rpm_idle() when no callback
PM: hibernate: remove leading spaces before tabs
PM: sleep: remove trailing spaces and tabs
PM: domains: Drop/restore performance state votes for devices at runtime PM
PM: domains: Return early if perf state is already set for the device
PM: domains: Split code in dev_pm_genpd_set_performance_state()
cpuidle: teo: Use kerneldoc documentation in admin-guide
cpuidle: teo: Rework most recent idle duration values treatment
cpuidle: teo: Change the main idle state selection logic
cpuidle: teo: Cosmetic modification of teo_select()
cpuidle: teo: Cosmetic modifications of teo_update()
...
|
|
- Stop using clock-output-names in ST clk drivers
* clk-st:
dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible
clk: st: clkgen-fsyn: embed soc clock outputs within compatible data
dt-bindings: clock: st: clkgen-pll: add new introduced compatible
clk: st: clkgen-pll: embed soc clock outputs within compatible data
dt-bindings: clock: st: flexgen: add new introduced compatible
clk: st: flexgen: embed soc clock outputs within compatible data
clk: st: clkgen-pll: remove unused variable of struct clkgen_pll
* clk-si:
clk: si5341: Add sysfs properties to allow checking/resetting device faults
clk: si5341: Add silabs,iovdd-33 property
clk: si5341: Add silabs,xaxb-ext-clk property
clk: si5341: Allow different output VDD_SEL values
clk: si5341: Update initialization magic
clk: si5341: Check for input clock presence and PLL lock on startup
clk: si5341: Avoid divide errors due to bogus register contents
clk: si5341: Wait for DEVICE_READY on startup
dt-bindings: clock: clk-si5341: Add new attributes
* clk-hisilicon:
clk: hisilicon: Add clock driver for hi3559A SoC
dt-bindings: Document the hi3559a clock bindings
|
|
'clk-ingenic' into clk-next
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock
Jitter Cleaner With Dual Loop PLLs
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
* clk-lmk04832:
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: lmk04832: add support for digital delay
clk: add support for the lmk04832
dt-bindings: clock: add ti,lmk04832 bindings
* clk-stm:
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: stm32mp1: move RCC reset controller into RCC clock driver
clk: stm32mp1: convert to module driver
clk: stm32mp1: remove intermediate pll clocks
clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clock
clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock
* clk-rohm:
clk: bd718xx: Drop BD70528 support
* clk-actions:
clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC
dt-bindings: clock: Add NIC and ETHERNET bindings for Actions S500 SoC
clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC
clk: actions: Fix SD clocks factor table on Owl S500 SoC
clk: actions: Fix UART clock dividers on Owl S500 SoC
* clk-ingenic:
clk: ingenic: Add support for the JZ4760
clk: ingenic: Support overriding PLLs M/N/OD calc algorithm
clk: ingenic: Remove pll_info.no_bypass_bit
clk: ingenic: Read bypass register only when there is one
clk: Support bypassing dividers
dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
|
|
'clk-socfpga' into clk-next
* clk-rockchip:
clk: rockchip: export ACLK_VCODEC for RK3036
clk: rockchip: fix rk3568 cpll clk gate bits
clk: rockchip: Optimize PLL table memory usage
* clk-amlogic:
clk: meson: g12a: Add missing NNA source clocks for g12b
clk: meson: axg-audio: improve deferral handling
clk: meson: g12a: fix gp0 and hifi ranges
clk: meson: pll: switch to determine_rate for the PLL ops
* clk-yaml:
dt-bindings: clock: gpio-mux-clock: Convert to json-schema
* clk-zynq:
clk: zynqmp: Handle divider specific read only flag
clk: zynqmp: Use firmware specific mux clock flags
clk: zynqmp: Use firmware specific divider clock flags
clk: zynqmp: Use firmware specific common clock flags
clk: zynqmp: pll: Remove some dead code
clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE
* clk-socfpga:
clk: socfpga: clk-pll: Remove unused variable 'rc'
clk: agilex/stratix10/n5x: fix how the bypass_reg is handled
clk: agilex/stratix10: add support for the 2nd bypass
clk: agilex/stratix10: fix bypass representation
clk: agilex/stratix10: remove noc_clk
|
|
'clk-imx' into clk-next
* clk-legacy:
clkdev: remove unused clkdev_alloc() interfaces
clkdev: remove CONFIG_CLKDEV_LOOKUP
m68k: coldfire: remove private clk_get/clk_put
m68k: coldfire: use clkdev_lookup on most coldfire
mips: ralink: convert to CONFIG_COMMON_CLK
mips: ar7: convert to CONFIG_COMMON_CLK
mips: ar7: convert to clkdev_lookup
* clk-vc5:
clk: vc5: fix output disabling when enabling a FOD
* clk-allwinner:
clk: sunxi-ng: v3s: fix incorrect postdivider on pll-audio
* clk-nvidia:
clk: tegra: clk-tegra124-dfll-fcpu: don't use devm functions for regulator
clk: tegra: tegra124-emc: Fix clock imbalance in emc_set_timing()
clk: tegra: Add stubs needed for compile-testing
clk: tegra: Don't deassert reset on enabling clocks
clk: tegra: Mark external clocks as not having reset control
clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling
clk: tegra: Don't allow zero clock rate for PLLs
clk: tegra: Halve SCLK rate on Tegra20
clk: tegra: Ensure that PLLU configuration is applied properly
clk: tegra: Fix refcounting of gate clocks
clk: tegra30: Use 300MHz for video decoder by default
* clk-imx:
clk: imx8mq: remove SYS PLL 1/2 clock gates
clk: imx: scu: Do not enable runtime PM for CPU clks
clk: imx: scu: add parent save and restore
clk: imx: scu: Only save DC SS clock using non-cached clock rate
clk: imx: scu: Add A72 frequency scaling support
clk: imx: scu: Add A53 frequency scaling support
clk: imx: scu: bypass pi_pll enable status restore
clk: imx: scu: detach pd if can't power up
clk: imx: scu: bypass cpu clock save and restore
clk: imx: scu: add parallel port clock ops
clk: imx: scu: add more scu clocks
clk: imx: scu: add enet rgmii gpr clocks
clk: imx8qm: add clock valid resource checking
clk: imx8qxp: add clock valid checking mechnism
clk: imx: scu: add gpr clocks support
clk: imx: scu: remove legacy scu clock binding support
dt-bindings: arm: imx: scu: drop deprecated legacy clock binding
dt-bindings: arm: imx: scu: fix naming typo of clk compatible string
clk: imx: Remove the audio ipg clock from imx8mp
|
|
'clk-ti' into clk-next
- duty cycle setting support on qcom clks
- qcom MDM9607 GCC
- qcom sc8180x display clks
- qcom SM6125 GCC
- Add TI am33xx spread spectrum clock support
* clk-qcom: (22 commits)
clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare
clk: qcom: Add camera clock controller driver for SM8250
dt-bindings: clock: add QCOM SM8250 camera clock bindings
clk: qcom: clk-alpha-pll: add support for zonda pll
clk/qcom: Remove unused variables
clk: qcom: smd-rpmcc: Add support for MSM8226 rpm clocks
clk: qcom: gcc: Add support for Global Clock controller found on MSM8226
dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
clk: qcom: Add SM6125 (TRINKET) GCC driver
dt-bindings: clk: qcom: gcc-sm6125: Document SM6125 GCC driver
clk: qcom: gcc: Add support for a new frequency for SC7280
clk: qcom: smd-rpm: Fix wrongly assigned RPM_SMD_PNOC_CLK
dt-bindings: clock: qcom: rpmcc: Document MSM8226 compatible
clk: qcom: dispcc-sm8250: Add EDP clocks
clk: qcom: dispcc-sm8250: Add sc8180x support
clk: qcom: smd-rpm: De-duplicate identical entries
clk: qcom: smd-rpm: Switch to parent_data
clk: qcom: Add MDM9607 GCC driver
dt-bindings: clock: Add MDM9607 GCC clock bindings
clk: qcom: cleanup some dev_err_probe() calls
...
* clk-versatile:
clk: versatile: Depend on HAS_IOMEM
clk: versatile: remove dependency on ARCH_*
* clk-renesas: (22 commits)
clk: renesas: Add support for R9A07G044 SoC
clk: renesas: Add CPG core wrapper for RZ/G2L SoC
dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
dt-bindings: clock: Add r9a07g044 CPG Clock Definitions
clk: renesas: r8a77995: Add ZA2 clock
clk: renesas: cpg-mssr: Make srstclr[] comment block consistent
clk: renesas: cpg-mssr: Remove unused [RM]MSTPCR() definitions
clk: renesas: r9a06g032: Switch to .determine_rate()
clk: renesas: div6: Implement range checking
clk: renesas: div6: Consider all parents for requested rate
clk: renesas: div6: Switch to .determine_rate()
clk: renesas: div6: Simplify src mask handling
clk: renesas: div6: Use clamp() instead of clamp_t()
clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()
clk: renesas: r8a779a0: Add ISPCS clocks
clk: renesas: rcar-gen3: Add boost support to Z clocks
clk: renesas: rcar-gen3: Add custom clock for PLLs
clk: renesas: rcar-gen3: Increase Z clock accuracy
clk: renesas: rcar-gen3: Grammar s/dependent of/dependent on/
clk: renesas: rcar-gen3: Remove superfluous masking in cpg_z_clk_set_rate()
...
* clk-sifive:
clk: analogbits: fix doc warning in wrpll-cln28hpc.c
clk: sifive: Fix kernel-doc
* clk-ti:
drivers: ti: remove redundant error message in adpll.c
clk: keystone: syscon-clk: Add support for AM64 specific epwm-tbclk
dt-bindings: clock: ehrpwm: Add support for AM64 specific compatible
clk: ti: add am33xx/am43xx spread spectrum clock support
ARM: dts: am43xx-clocks: add spread spectrum support
ARM: dts: am33xx-clocks: add spread spectrum support
dt-bindings: ti: dpll: add spread spectrum support
clk: ti: fix typo in routine description
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Cleanup and simplification of common code to invoke the low level
interrupt flow handlers when this invocation requires irqdomain
resolution. Add the necessary core infrastructure.
- Provide a proper interface for modular PMU drivers to set the
interrupt affinity.
- Add a request flag which allows to exclude interrupts from spurious
interrupt detection. Useful especially for IPI handlers which
always return IRQ_HANDLED which turns the spurious interrupt
detection into a pointless waste of CPU cycles.
Driver changes:
- Bulk convert interrupt chip drivers to the new irqdomain low level
flow handler invocation mechanism.
- Add device tree bindings for the Renesas R-Car M3-W+ SoC
- Enable modular build of the Qualcomm PDC driver
- The usual small fixes and improvements"
* tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
dt-bindings: interrupt-controller: arm,gic-v3: Describe GICv3 optional properties
irqchip: gic-pm: Remove redundant error log of clock bulk
irqchip/sun4i: Remove unnecessary oom message
irqchip/irq-imx-gpcv2: Remove unnecessary oom message
irqchip/imgpdc: Remove unnecessary oom message
irqchip/gic-v3-its: Remove unnecessary oom message
irqchip/gic-v2m: Remove unnecessary oom message
irqchip/exynos-combiner: Remove unnecessary oom message
irqchip: Bulk conversion to generic_handle_domain_irq()
genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ()
genirq: Add generic_handle_domain_irq() helper
irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq()
irqdesc: Fix __handle_domain_irq() comment
genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co
irqdomain: Introduce irq_resolve_mapping()
irqdomain: Protect the linear revmap with RCU
irqdomain: Cache irq_data instead of a virq number in the revmap
irqdomain: Use struct_size() helper when allocating irqdomain
irqdomain: Make normal and nomap irqdomains exclusive
powerpc: Move the use of irq_domain_add_nomap() behind a config option
...
|
|
Pull documentation updates from Jonathan Corbet:
"This was a reasonably active cycle for documentation; this includes:
- Some kernel-doc cleanups. That script is still regex onslaught from
hell, but it has gotten a little better.
- Improvements to the checkpatch docs, which are also used by the
tool itself.
- A major update to the pathname lookup documentation.
- Elimination of :doc: markup, since our automarkup magic can create
references from filenames without all the extra noise.
- The flurry of Chinese translation activity continues.
Plus, of course, the usual collection of updates, typo fixes, and
warning fixes"
* tag 'docs-5.14' of git://git.lwn.net/linux: (115 commits)
docs: path-lookup: use bare function() rather than literals
docs: path-lookup: update symlink description
docs: path-lookup: update get_link() ->follow_link description
docs: path-lookup: update WALK_GET, WALK_PUT desc
docs: path-lookup: no get_link()
docs: path-lookup: update i_op->put_link and cookie description
docs: path-lookup: i_op->follow_link replaced with i_op->get_link
docs: path-lookup: Add macro name to symlink limit description
docs: path-lookup: remove filename_mountpoint
docs: path-lookup: update do_last() part
docs: path-lookup: update path_mountpoint() part
docs: path-lookup: update path_to_nameidata() part
docs: path-lookup: update follow_managed() part
docs: Makefile: Use CONFIG_SHELL not SHELL
docs: Take a little noise out of the build process
docs: x86: avoid using ReST :doc:`foo` markup
docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
...
|
|
Introduce new compatible string "st,stm32mp1-rcc-secure" for
stm32mp1 clock driver when the device is configured with RCC
security support hardened.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210617051814.12018-11-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Algorithms:
- Fix rmmod crash with x86/curve25519
- Add ECDH NIST P384
- Generate assembly files at build-time with perl scripts on arm
- Switch to HMAC SHA512 DRBG as default DRBG
Drivers:
- Add sl3516 crypto engine
- Add ECDH NIST P384 support in hisilicon/hpre
- Add {ofb,cfb,ctr} over {aes,sm4} in hisilicon/sec
- Add {ccm,gcm} over {aes,sm4} in hisilicon/sec
- Enable omap hwrng driver for TI K3 family
- Add support for AEAD algorithms in qce"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits)
crypto: sl3516 - depends on HAS_IOMEM
crypto: hisilicon/qm - implement for querying hardware tasks status.
crypto: sl3516 - Fix build warning without CONFIG_PM
MAINTAINERS: update caam crypto driver maintainers list
crypto: nx - Fix numerous sparse byte-order warnings
crypto: nx - Fix RCU warning in nx842_OF_upd_status
crypto: api - Move crypto attr definitions out of crypto.h
crypto: nx - Fix memcpy() over-reading in nonce
crypto: hisilicon/sec - Fix spelling mistake "fallbcak" -> "fallback"
crypto: sa2ul - Remove unused auth_len variable
crypto: sl3516 - fix duplicated inclusion
crypto: hisilicon/zip - adds the max shaper type rate
crypto: hisilicon/hpre - adds the max shaper type rate
crypto: hisilicon/sec - adds the max shaper type rate
crypto: hisilicon/qm - supports to inquiry each function's QoS
crypto: hisilicon/qm - add pf ping single vf function
crypto: hisilicon/qm - merges the work initialization process into a single function
crypto: hisilicon/qm - add the "alg_qos" file node
crypto: hisilicon/qm - supports writing QoS int the host
crypto: api - remove CRYPTOA_U32 and related functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- V4L2 core control API was split into separate files
- New RC maps: tango and tc-90405
- Hantro driver got support for G2/HEVC decoder
- av7710 is moving to staging, together with some legacy APIs
- several cleanups related to compat_ioctl32 code
- Move the MPEG-2 stateless control type out of staging
- Address several issues with RPM get logic on media drivers
- Lots of cleanups, bug fixes and improvements.
* tag 'media/v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: s5p-mfc: Fix display delay control creation
media: mtk-vpu: on suspend, read/write regs only if vpu is running
media: video-mux: Skip dangling endpoints
media: Fix Media Controller API config checks
media: i2c: rdacm20: Re-work ov10635 reset
media: i2c: rdacm20: Check return values
media: i2c: rdacm20: Report camera module name
media: i2c: rdacm20: Enable noise immunity
media: i2c: rdacm20: Embed 'serializer' field
media: i2c: rdacm21: Power up OV10640 before OV490
media: i2c: rdacm21: Fix OV10640 powerup
media: i2c: rdacm21: Add delay after OV490 reset
media: i2c: max9271: Introduce wake_up() function
media: i2c: max9271: Check max9271_write() return
media: i2c: max9286: Rework comments in .bound()
media: i2c: max9286: Define high channel amplitude
media: i2c: max9286: Cache channel amplitude
media: i2c: max9286: Rename reverse_channel_mv
media: i2c: max9286: Adjust parameters indent
media: hantro: add support for Rockchip RK3036
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Delta DPS920AB
- Flex PIM4006, PIM4328 and PIM4820
- MPS MP2888
- Sensirion SHT4X
Added chip support to existing drivers:
- Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, and
BMR492
- TI TMP1075
- Renesas ZLS1003, ZLS4009 and ZL8802
Other:
- Dropped explicit ACPI support for MAX31722 and LM70; the APIC IDs
in those drivers do not exist.
- Support set_trips() callback into thermal subsystem
- Minor fixes and improvements in various drivers"
* tag 'hwmon-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
hwmon: Support set_trips() of thermal device ops
hwmon: (lm90) Prevent integer underflows of temperature calculations
hwmon: (lm90) Disable interrupt on suspend
hwmon: (lm90) Unmask hardware interrupt
hwmon: (lm90) Use hwmon_notify_event()
hwmon: (lm90) Don't override interrupt trigger type
hwmon: (pmbus/dps920ab) Delete some dead code
hwmon: (ntc_thermistor) Drop unused headers.
MAINTAINERS: Add Delta DPS920AB PSU driver
dt-bindings: trivial-devices: Add Delta DPS920AB
hwmon: (pmbus) Add driver for Delta DPS-920AB PSU
hwmon: (pmbus/pim4328) Add documentation for the pim4328 PMBus driver
hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820
hwmon: (pmbus) Allow phase function even if it's not on page
hwmon: (pmbus) Add support for reading direct mode coefficients
hwmon: (pmbus) Add new pmbus flag NO_WRITE_PROTECT
docs: hwmon: adm1177.rst: avoid using ReSt :doc:`foo` markup
hwmon: (pmbus_core) Check adapter PEC support
hwmon: (ina3221) use CVRF only for single-shot conversion
hwmon: (max31790) Detect and report zero fan speed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The biggest single thing in the diffstat here is a massive overhaul of
the PXA2xx driver from Andy Shevchenko (the IP is still in use on
modern Intel systems), though we also have quite a lot of core work as
well:
- Better support for mixing native and GPIO chip selects also from
Andy.
- Support for devices with multiple chip selects from Sebastian
Reichel.
- Helper for polling status registers in spi-mem from Patrice
Chotard.
- Support for Renesas RZ/N1 and Rockchip RV1126"
* tag 'spi-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits)
spi: core: add dma_map_dev for dma device
spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML
spi: Fix self assignment issue with ancillary->mode
spi: spi-sh-msiof: : use proper DMAENGINE API for termination
spi: spi-rspi: : use proper DMAENGINE API for termination
spi: spi-rockchip: add description for rv1126
spi: rockchip: Support SPI_CS_HIGH
spi: rockchip: Support cs-gpio
spi: rockchip: Wait for STB status in slave mode tx_xfer
spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
spi: rockchip: add compatible string for rv1126
spi: spi-sun6i: Fix chipselect/clock bug
spi: dt-bindings: support devices with multiple chipselects
spi: add ancillary device support
spi: xilinx: convert to yaml
spi: convert Cadence SPI bindings to YAML
spi: stm32-qspi: Remove unused qspi field of struct stm32_qspi_flash
spi: add of_device_uevent_modalias support
spi: meson-spicc: fix memory leak in meson_spicc_probe
spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The main core change this release is generic support for handling of
hardware errors from Matti Vaittinen, including some small updates to
the reboot and thermal code so we can share support for powering off
the system if things are going wrong enough.
Otherwise this release we've mainly seen the addition of new drivers,
including MT6359 which has pulled in some small changes from the MFD
tree for build dependencies.
- Support for controlling the trigger points for hardware error
detection, and shared handlers for this.
- Support for Maxim MAX8993, Mediatek MT6359 and MT6359P, Qualcomm
PM8226 and SA8115P-ADP, and Sylergy TCS4526"
* tag 'regulator-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (91 commits)
regulator: bd9576: Fix uninitializes variable may_have_irqs
regulator: max8893: Select REGMAP_I2C to fix build error
regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
regulator: mt6358: Fix vdram2 .vsel_mask
regulator: hi6421v600: Fix setting wrong driver_data
MAINTAINERS: Add reviewer for regulator irq_helpers
regulator: bd9576: Fix the driver name in id table
regulator: bd9576: Support error reporting
regulator: bd9576 add FET ON-resistance for OCW
regulator: add property parsing and callbacks to set protection limits
regulator: IRQ based event/error notification helpers
regulator: move rdev_print helpers to internal.h
regulator: add warning flags
thermal: Use generic HW-protection shutdown API
reboot: Add hardware protection power-off
regulator: Add protection limit properties
regulator: hi6421v600: Fix setting idle mode
regulator: Add MAX8893 bindings
regulator: max8893: add regulator driver
regulator: hi6421: Use correct variable type for regmap api val argument
...
|
|
Add DT bindings documentation for hi3559a SoC clock.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1616498973-47067-2-git-send-email-gengdongjiu1@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add new silabs,xaxb-ext-clk and silabs,iovdd-33 properties.
Changed vdd-supply on top-level node to optional since it is not actually
used by the driver.
Removed vdd-supply from output sub-nodes, as it was not supported by the
driver and it is not easily possible to support this in that location with
the kernel regulator infrastructure. Changed to have vddoX-supply
attributes for each output on the top-level device node.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-2-robert.hancock@calian.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
New compatible are added, supporting various kind of clkgen-fsyn
used for STiH407, STiH410 and STiH418
Signed-off-by: Alain Volmat <avolmat@me.com>
Link: https://lore.kernel.org/r/20210331201632.24530-8-avolmat@me.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
New compatible are added, supporting various kind of clkgen-pll
used for STiH407, STiH410 and STiH418
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210331201632.24530-6-avolmat@me.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
New compatible are added, supporting various kind of flexgen in
STiH407, STiH410 and STiH418
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210331201632.24530-4-avolmat@me.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add ingenic,jz4760-cgu and ingenic,jz4760b-cgu compatible strings for
the JZ4760 and JZ4760B SoCs respectively.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210530164923.18134-2-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Document devicetree bindings for Texas Instruments' LMK04832.
The LMK04208 is a high performance clock conditioner with superior clock
jitter cleaning, generation, and distribution with JEDEC JESD204B
support.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Link: https://lore.kernel.org/r/20210423004057.283926-4-liambeguin@gmail.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM8250 SoC.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210609022051.2171-3-jonathan@marek.ca
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add compatible device strings and the include files for the MSM8226 GCC.
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Link: https://lore.kernel.org/r/20210418122909.71434-2-bartosz.dudziak@snejp.pl
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Document the newly added SM6125 GCC driver.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210605121040.282053-1-martin.botka@somainline.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add device tree bindings for the MSS system controller on
the Microchip PolarFire SoC.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add device tree bindings for the MSS system controller mailbox on
the Microchip PolarFire SoC.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add compatible for the Qualcomm MSM8939 APCS block to the Qualcomm APCS
bindings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This patch adds the binding for sm6125
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The register layout and bits definition of i.MX8ULP MU is different
compared with others, let's add the compatible for the new MU.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This patch enables regulators and gpios for the Qualcomm Bluetooth wcn6750
controller.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Converted Qualcomm Bluetooth binidings to DT schema.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Convert the simple GPIO clock multiplexer Device Tree binding
documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/14cb3b4da446f26a4780e0bd1b58788eb6085d05.1623414619.git.geert+renesas@glider.be
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq material for v5.14 from Chanwoo Choi:
1. Update devfreq core
- Use DEVICE_ATTR_RW macro for devfreq userspace governor.
- Add missing error code in devfreq_add_device().
- Fix get_target_freq() when not using required-opp.
2. Update devfreq drivers
- Remove unneeded get_dev_status() and polling_ms from imx-bus.c,
because imx-bus.c doesn't support simple_ondemand.
- Remove unneeded DEVFREQ_GOV_SIMPLE_ONDEMAND dependecy from
imx8m-ddrc.c, because it doesn't support the simple_ondemand
governor.
- Use tegra30-devfreq.c as thermal cooling device.
- Convert dt-binding doc style to yaml and add cooling-cells
property information to dt-binding doc for tegra30-devfreq.c.
* tag 'devfreq-next-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: passive: Fix get_target_freq when not using required-opp
dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
dt-bindings: devfreq: tegra30-actmon: Convert to schema
PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
PM / devfreq: imx8m-ddrc: Remove DEVFREQ_GOV_SIMPLE_ONDEMAND dependency
PM / devfreq: tegra30: Support thermal cooling
PM / devfreq: imx-bus: Remove imx_bus_get_dev_status
PM / devfreq: Add missing error code in devfreq_add_device()
|
|
'x86/amd', 'virtio' and 'core' into next
|
|
|
|
|
|
|
|
Convert spi for Xilinx Zynq UltraScale+ MPSoC GQSPI bindings
documentation to YAML.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210613214317.296667-1-iwamatsu@nigauri.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the Sparx5 switch device driver bindings
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
|
