summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23dt-bindings: slimbus: qcom,slim-ngd: convert to DT schemaKrzysztof Kozlowski2-82/+120
Convert the Qualcomm SoC SLIMBus Non Generic Device (NGD) controller bindings to DT Schema. During conversion add iommus already present in DTS and extend the example based on SDM845. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118065246.6835-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: slimbus: qcom,slim: convert to DT schemaKrzysztof Kozlowski2-36/+86
Convert the Qualcomm SoC SLIMbus controller bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118065246.6835-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: slimbus: convert bus description to DT schemaKrzysztof Kozlowski4-65/+95
Convert the SLIMbus bus description bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118065246.6835-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: nvmem: add YAML schema for the ONIE tlv layoutMiquel Raynal2-0/+148
Add a schema for the ONIE tlv NVMEM layout that can be found on any ONIE compatible networking device. Describe all the possible NVMEM cells that can be produced by this layout parser. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118063932.6418-14-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: vendor-prefixes: Add ONIEMiquel Raynal1-0/+2
As described on their website (see link below), "The Open Network Install Environment (ONIE) is an open source initiative that defines an open “install environment” for modern networking hardware." It is not a proper corporation per-se but rather more a group which tries to spread the use of open source standards in the networking hardware world. Link: https://opencomputeproject.github.io/onie/ Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118063932.6418-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: nvmem: add YAML schema for the sl28 vpd layoutMichael Walle2-0/+67
Add a schema for the NVMEM layout on Kontron's sl28 boards. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118063932.6418-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: eeprom: Inherit from nvmem.yamlMiquel Raynal3-1/+6
EEPROMs can be nvmem providers. Let's make all EEPROM bindings reference nvmem.yaml as they should, so that nvmem cells and layout parsers can be safely described within the EEPROM nodes. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118063932.6418-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: nvmem: Introduce the nvmem-layout containerMiquel Raynal2-0/+37
The nvmem devices description works like this: * Most cases (EEPROM & co): eeprom@x { compatible = "<eeprom-compatible>"; ... }; * MTD case: flash@y { compatible = "<flash-compatible>"; ... otp { compatible = "user-otp"; /* or "factory-otp" */ ... }; }; In the former case, the nvmem device is "eeprom@x", while in the latter case the nvmem device is "otp". Nvmem devices can produce nvmem cells. The current way to describe nvmem cells is to locate them by providing their static byte and bit offset and length. These information are stored in subnodes of the nvmem device. It is now a fact that such description does not fit more advanced use cases where the location or the size of the cells may vary. There are currently three known situations which require being described differently: Kontron's SL28 VPD, ONIE's TLV table and U-Boot's environment variables. Hence, we need a way to describe the parsers that must be used in order to make the dynamic discovery of the nvmem cells. This new description must fit both use cases (the generic situation and the MTD case). Let's create in both cases a container node named nvmem-layout whose content will depend on the parser. Right now nvmem-layout.yaml is "empty", but references to additional layout parser bindings will be inserted in the near future. The final goal being something that looks like: * Most cases (EEPROM & co): eeprom@x { compatible = "<eeprom-compatible>"; ... nvmem-layout { compatible = "<parser-compatible>"; ... }; }; * MTD case: flash@y { compatible = "<flash-compatible>"; ... otp { compatible = "user-otp"; /* or "factory-otp" */ ... nvmem-layout { compatible = "<parser-compatible>"; ... }; }; }; Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118063932.6418-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: nvmem: Fix exampleMiquel Raynal1-0/+1
Despite not being listed nor required within the top level nvmem yaml file, the "compatible" property is mandatory and is actually enforced by all the nvmem provider bindings. Unfortunately, the lack of compatible in the nvmem.yaml to level description file lead to the example not matching anything and thus not being checked at all. Let's pick a compatible almost randomly (one which is already used with the qfprom label) to make the example at least valid on a semantic point of view and getting it checked. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118063932.6418-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23dt-bindings: nvmem: add new stm32mp13 compatible for stm32-romemPatrick Delaunay1-0/+1
Add a new compatible for stm32mp13 support. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221118063932.6418-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-23Merge tag 'fpga-for-6.2-rc1' of ↵Greg Kroah-Hartman1-0/+81
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next Xu writes: FPGA Manager changes for 6.2-rc1 Zynq: - Yang's change Switch to use dev_err_probe() helper Lattice: - Ivan's change add support for Lattice Sysconfig FPGA reprogrammer All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-next branch). Signed-off-by: Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: dt-bindings: fpga: document Lattice sysCONFIG FPGA manager fpga: lattice-sysconfig-spi: add Lattice sysCONFIG FPGA manager fpga: zynq: Switch to use dev_err_probe() helper
2022-11-21Merge 6.1-rc6 into char-misc-nextGreg Kroah-Hartman6-12/+31
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-19Merge tag 'input-for-v6.1-rc5' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for 8042 to stop leaking platform device on unload - a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we need to reset controller to load config from firmware - a workaround for Acer Switch to avoid interrupt storm from home and power buttons - a workaround for more ASUS ZenBook models to detect keyboard controller - a fix for iforce driver to properly handle communication errors - touchpad on HP Laptop 15-da3001TU switched to RMI mode * tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix leaking of platform device on module removal Input: i8042 - apply probe defer to more ASUS ZenBook models Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[] Input: soc_button_array - add use_low_level_irq module parameter Input: iforce - invert valid length check when fetching device IDs Input: goodix - try resetting the controller when no config is set dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
2022-11-18Merge tag 'sound-6.1-rc6' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A fair amount of commits at this time due to ASoC PR merge, but all look small and easy, mostly device-specific fixes spanned in various drivers. Hopefully this should be the last big chunk for 6.1" * tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360 ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open() ASoC: stm32: dfsdm: manage cb buffers cleanup ASoC: sof_es8336: reduce pop noise on speaker ASoC: SOF: topology: No need to assign core ID if token parsing failed ASoC: soc-utils: Remove __exit for snd_soc_util_exit() ASoC: rt5677: fix legacy dai naming ASoC: rt5514: fix legacy dai naming ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake ASoC: Intel: soc-acpi: add ES83x6 support to IceLake ASoC: tas2780: Fix set_tdm_slot in case of single slot ASoC: tas2764: Fix set_tdm_slot in case of single slot ASoC: tas2770: Fix set_tdm_slot in case of single slot ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N ASoC: core: Fix use-after-free in snd_soc_exit() MAINTAINERS: update Tzung-Bi's email address ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01 ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table ...
2022-11-11Merge tag 'net-6.1-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wifi, can and bpf. Current release - new code bugs: - can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet Previous releases - regressions: - bpf, sockmap: fix the sk->sk_forward_alloc warning - wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() - can: af_can: fix NULL pointer dereference in can_rx_register() - can: dev: fix skb drop check, avoid o-o-b access - nfnetlink: fix potential dead lock in nfnetlink_rcv_msg() Previous releases - always broken: - bpf: fix wrong reg type conversion in release_reference() - gso: fix panic on frag_list with mixed head alloc types - wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker() - wifi: mac80211: set TWT Information Frame Disabled bit as 1 - eth: macsec offload related fixes, make sure to clear the keys from memory - tun: fix memory leaks in the use of napi_get_frags - tun: call napi_schedule_prep() to ensure we own a napi - tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent - ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network - tipc: fix a msg->req tlv length check - sctp: clear out_curr if all frag chunks of current msg are pruned, avoid list corruption - mctp: fix an error handling path in mctp_init(), avoid leaks" * tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) eth: sp7021: drop free_netdev() from spl2sw_init_netdev() MAINTAINERS: Move Vivien to CREDITS net: macvlan: fix memory leaks of macvlan_common_newlink ethernet: tundra: free irq when alloc ring failed in tsi108_open() net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open() ethernet: s2io: disable napi when start nic failed in s2io_card_up() net: atlantic: macsec: clear encryption keys from the stack net: phy: mscc: macsec: clear encryption keys when freeing a flow stmmac: dwmac-loongson: fix missing of_node_put() while module exiting stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe() stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open() mctp: Fix an error handling path in mctp_init() stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz net: cxgb3_main: disable napi when bind qsets failed in cxgb_up() net: cpsw: disable napi in cpsw_ndo_open() iavf: Fix VF driver counting VLAN 0 filters ice: Fix spurious interrupt during removal of trusted VF net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions net/mlx5e: E-Switch, Fix comparing termination table instance ...
2022-11-10dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus bindingLiu Ying1-0/+232
Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems, like I2C controller, PWM controller, MIPI DSI controller and Control and Status Registers (CSR) module. Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel link MSI bus specific bindings. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20221017074039.4181843-3-victor.liu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10dt-bindings: spmi: Add qcom,bus-idVinod Koul1-0/+10
For PMIC arbiter version 7 and beyond we need to define if we are using primary or secondary bus, so add a new property of qcom,bus-id Signed-off-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221110100755.4032505-2-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10Merge tag 'hwlock-v6.1' of ↵Linus Torvalds1-8/+21
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull hwspinlock updates from Bjorn Andersson: "I apparently had missed tagging and sending this set of changes out during the 6.1 merge window. But did get the associated dts changes depending on this merged. The result is a regression in 6.1-rc on the affected, older, Qualcomm platforms - in for form of them not booting. So while these weren't regression fixes originally, they are now. It's not introducing new beahavior, but simply extending the existing new Devicetree model, to cover remaining platforms: - extend the DeviceTree binding and implementation for the Qualcomm hardware spinlock on some older platforms to follow the style of the newer ones where the DeviceTree representation does not rely on an intermediate syscon node" * tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974 hwspinlock: qcom: add support for MMIO on older SoCs hwspinlock: qcom: correct MMIO max register for newer SoCs dt-bindings: hwlock: qcom-hwspinlock: correct example indentation dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs
2022-11-08dt-bindings: net: tsnep: Fix typo on generic nvmem propertyMiquel Raynal1-1/+1
While working on the nvmem description I figured out this file had the "nvmem-cell-names" property name misspelled. Fix the typo, as "nvmem-cells-names" has never existed. Fixes: 603094b2cdb7 ("dt-bindings: net: Add tsnep Ethernet controller") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221104162147.1288230-1-miquel.raynal@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-05Merge tag 'soc-fixes-6.1-2' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are not a lot of important fixes for the soc tree yet this time, but it's time to upstream what I got so far: - DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical temperature points - A number of fixes for the Arm SCMI firmware, addressing correctness issues in the code, in particular error handling and resource leaks. - One error handling fix for the new i.MX93 power domain driver - Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips, fixing incorrect or missing DT properties for MDIO controller nodes, CPLD, USB and regulators for various boards, as well as some fixes for DT schema checks. - MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git URLs" * tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits) arm64: dts: juno: Add thermal critical trip points firmware: arm_scmi: Fix deferred_tx_wq release on error paths firmware: arm_scmi: Fix devres allocation device in virtio transport firmware: arm_scmi: Make Rx chan_setup fail on memory errors firmware: arm_scmi: Make tx_prepare time out eventually firmware: arm_scmi: Suppress the driver's bind attributes firmware: arm_scmi: Cleanup the core driver removal callback MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer ARM: dts: ux500: Add trips to battery thermal zones arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe() arm64: dts: imx93: correct gpio-ranges arm64: dts: imx93: correct s4mu interrupt names dt-bindings: power: gpcv2: add power-domains property arm64: dts: imx8: correct clock order ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset arm64: dts: imx8mn: Correct the usb power domain ...
2022-11-01Merge tag 'imx-fixes-6.1' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.1: - Fix imx93-pd driver to release resources when error occurs in probe. - A series from Ioana Ciornei to add missing clock frequencies for MDIO controllers on LayerScape SoCs, so that the kernel driver can work independently from bootloader. - A series from Li Jun to fix USB power domain setup in i.MX8MM/N device trees. - Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering with CPLD power off functionality. - Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board. - Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device tree. - Fix up gpcv2 DT bindings to have an optional `power-domains` property. - A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges of GPIO controllers. - Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to work around a hardware design flaw in supply voltage distribution. - Fix user push-button GPIO offset on imx6qdl-gw59 boards. * tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe() arm64: dts: imx93: correct gpio-ranges arm64: dts: imx93: correct s4mu interrupt names dt-bindings: power: gpcv2: add power-domains property arm64: dts: imx8: correct clock order ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset arm64: dts: imx8mn: Correct the usb power domain arm64: dts: imx8mn: remove otg1 power domain dependency on hsio arm64: dts: imx8mm: correct usb power domains arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo Link: https://lore.kernel.org/r/20221101031547.GB125525@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-29dt-bindings: power: gpcv2: add power-domains propertyPeng Fan1-0/+3
Some pgc power-domain requires a parent power domain, so add an optional power-domains property, otherwise there will be dt check warning: gpc@303a0000: pgc:power-domain@1: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 30af8513bdb5 ("dt-bindings: power: add defines for i.MX8MM power domains") Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-10-26MAINTAINERS: update Tzung-Bi's email addressTzung-Bi Shih2-2/+2
Use kernel.org account instead. Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20221025024929.2652134-1-tzungbi@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-25dt-bindings: fpga: document Lattice sysCONFIG FPGA managerIvan Bornyakov1-0/+81
Add Device Tree Binding doc for configuring Lattice ECP5 FPGA over Slave SPI sysCONFIG interface. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20221025053947.2737-3-i.bornyakov@metrotek.ru Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2022-10-24Merge tag 'pinctrl-v6.1-3' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix typos in UART1 and MMC in the Ingenic driver - A really well researched glitch bug fix to the Qualcomm driver that was tracked down and fixed by Dough Anderson from Chromium. Hats off for this one! - Revert two patches on the Xilinx ZynqMP driver: this needs a proper solution making use of firmware version information to adapt to different firmware releases - Fix interrupt triggers in the Ocelot driver * tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ocelot: Fix incorrect trigger of the interrupt. Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration" Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance" pinctrl: qcom: Avoid glitching lines when we first mux to output pinctrl: Ingenic: JZ4755 bug fixes
2022-10-23Merge tag 'media/v6.1-2' of ↵Linus Torvalds2-9/+47
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-21Merge tag 'net-6.1-rc2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - revert "net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}" - revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" - dsa: uninitialized variable in dsa_slave_netdevice_event() - eth: sunhme: uninitialized variable in happy_meal_init() Current release - new code bugs: - eth: octeontx2: fix resource not freed after malloc Previous releases - regressions: - sched: fix return value of qdisc ingress handling on success - sched: fix race condition in qdisc_graft() - udp: update reuse->has_conns under reuseport_lock. - tls: strp: make sure the TCP skbs do not have overlapping data - hsr: avoid possible NULL deref in skb_clone() - tipc: fix an information leak in tipc_topsrv_kern_subscr - phylink: add mac_managed_pm in phylink_config structure - eth: i40e: fix DMA mappings leak - eth: hyperv: fix a RX-path warning - eth: mtk: fix memory leaks Previous releases - always broken: - sched: cake: fix null pointer access issue when cake_init() fails" * tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) net: phy: dp83822: disable MDI crossover status change interrupt net: sched: fix race condition in qdisc_graft() net: hns: fix possible memory leak in hnae_ae_register() wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new() sfc: include vport_id in filter spec hash and equal() genetlink: fix kdoc warnings selftests: add selftest for chaining of tc ingress handling to egress net: Fix return value of qdisc ingress handling on success net: sched: sfb: fix null pointer access issue when sfb_init() fails Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" net: sched: cake: fix null pointer access issue when cake_init() fails ethernet: marvell: octeontx2 Fix resource not freed after malloc netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces. ionic: catch NULL pointer issue on reconfig net: hsr: avoid possible NULL deref in skb_clone() bnxt_en: fix memory leak in bnxt_nvm_test() ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed udp: Update reuse->has_conns under reuseport_lock. net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable() ...
2022-10-18Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"Sai Krishna Potthuri1-4/+0
This reverts commit 133ad0d9af99bdca90705dadd8d31c20bfc9919f. On systems with older PMUFW (Xilinx ZynqMP Platform Management Firmware) using these pinctrl properties can cause system hang because there is missing feature autodetection. When this feature is implemented, support for these two properties should bring back. Cc: stable@vger.kernel.org Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20221017130303.21746-3-sai.krishna.potthuri@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-18dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974Krzysztof Kozlowski1-1/+5
The TCSR_MUTEX region contains two set of registers: mutex and halt. Add syscon, so the TCSR mutex device (hwspinlock) can use MMIO based method and in the same time share regmap with other devices for the halt regs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> # fairphone-fp2 Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220920150414.637634-2-krzysztof.kozlowski@linaro.org
2022-10-17dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chipSheng-Liang Pan1-1/+4
Add a compatible for Goodix touch screen chip GT7986U which is is expected to be fully compatible with a driver written for GT7375P. Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221006185333.v7.3.I52e4b4b20e2eb0ae20f2a9bb198aa6410f04cf16@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-10-14Merge tag 'leds-6.1-rc1' of ↵Linus Torvalds1-18/+21
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "This is very quiet release for LEDs, pca963 got blinking support and that's pretty much it" * tag 'leds-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: pca963: fix misleading indentation dt-bindings: leds: Document mmc trigger leds: pca963x: fix blink with hw acceleration
2022-10-14Merge tag 'riscv-for-linus-6.1-mw2' of ↵Linus Torvalds5-22/+58
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - DT updates for the PolarFire SOC - a fix to correct the handling of write-only mappings - m{vetndor,arcd,imp}id is now in /proc/cpuinfo - the SiFive L2 cache controller support has been refactored to also support L3 caches - misc fixes, cleanups and improvements throughout the tree * tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) MAINTAINERS: add RISC-V's patchwork RISC-V: Make port I/O string accessors actually work riscv: enable software resend of irqs RISC-V: Re-enable counter access from userspace riscv: vdso: fix NULL deference in vdso_join_timens() when vfork riscv: Add cache information in AUX vector soc: sifive: ccache: define the macro for the register shifts soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes soc: sifive: ccache: reduce printing on init soc: sifive: ccache: determine the cache level from dts soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache riscv: check for kernel config option in t-head memory types errata riscv: use BIT() marco for cpufeature probing riscv: use BIT() macros in t-head errata init riscv: drop some idefs from CMO initialization riscv: cleanup svpbmt cpufeature probing riscv: Pass -mno-relax only on lld < 15.0.0 RISC-V: Avoid dereferening NULL regs in die() dt-bindings: riscv: add new riscv,isa strings for emulators ...
2022-10-14MAINTAINERS: nfc: s3fwrn5: Drop Krzysztof OpasiakKrzysztof Kozlowski1-1/+0
Emails to Krzysztof Opasiak bounce ("Recipient address rejected: User unknown") so drop his email from maintainers of s3fwrn5 NFC bindings and driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-13Merge tag 'devicetree-fixes-for-6.1-1' of ↵Linus Torvalds2-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fixes for Mediatek MT6370 binding - Merge the DT overlay maintainer entry to the main entry as Pantelis is not active and Frank is taking a step back * tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: of: collapse overlay entry into main device tree entry dt-bindings: mfd: mt6370: fix the interrupt order of the charger in the example dt-bindings: leds: mt6370: Fix MT6370 LED indicator DT warning
2022-10-13Merge patch series "Use composable cache instead of L2 cache"Palmer Dabbelt1-5/+23
Zong Li <zong.li@sifive.com> says: Since composable cache may be L3 cache if private L2 cache exists, we should use its original name "composable cache" to prevent confusion. This patchset contains the modification which is related to ccache, such as DT binding and EDAC driver. * b4-shazam-merge: riscv: Add cache information in AUX vector soc: sifive: ccache: define the macro for the register shifts soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes soc: sifive: ccache: reduce printing on init soc: sifive: ccache: determine the cache level from dts soc: sifive: ccache: Rename SiFive L2 cache to Composable cache. dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache Link: https://lore.kernel.org/r/20220913061817.22564-1-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-13dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cacheZong Li1-5/+23
Since composable cache may be L3 cache if private L2 cache exists, we should use its original name Composable cache to prevent confusion. Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: Conor Dooley <conor.dooley@microchip.com> Suggested-by: Ben Dooks <ben.dooks@sifive.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220913061817.22564-2-zong.li@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-13Merge tag 'linux-watchdog-6.1-rc1' of ↵Linus Torvalds10-118/+289
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - new driver for Exar/MaxLinear XR28V38x - support for exynosautov9 SoC - support for Renesas R-Car V5H (R8A779G0) and RZ/V2M (r9a09g011) SoC - support for imx93 - several other fixes and improvements * tag 'linux-watchdog-6.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: twl4030_wdt: add missing mod_devicetable.h include dt-bindings: watchdog: migrate mt7621 text bindings to YAML watchdog: sp5100_tco: Add "action" module parameter watchdog: imx93: add watchdog timer on imx93 watchdog: imx7ulp_wdt: init wdog when it was active watchdog: imx7ulp_wdt: Handle wdog reconfigure failure watchdog: imx7ulp_wdt: Fix RCS timeout issue watchdog: imx7ulp_wdt: Check CMD32EN in wdog init watchdog: imx7ulp: Add explict memory barrier for unlock sequence watchdog: imx7ulp: Move suspend/resume to noirq phase watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the code dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt watchdog: s3c2410_wdt: support exynosautov9 watchdog dt-bindings: watchdog: add exynosautov9 compatible watchdog: npcm: Enable clock if provided watchdog: meson: keep running if already active watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schema watchdog: armada_37xx_wdt: Fix .set_timeout callback watchdog: sa1100: make variable sa1100dog_driver static watchdog: w83977f_wdt: Fix comment typo ...
2022-10-13Merge patch series "Fix dt-validate issues on qemu dtbdumps due to dt-bindings"Palmer Dabbelt3-9/+19
Conor Dooley <mail@conchuod.ie> says: From: Conor Dooley <conor.dooley@microchip.com> The device trees produced automatically for the virt and spike machines fail dt-validate on several grounds. Some of these need to be fixed in the linux kernel's dt-bindings, but others are caused by bugs in QEMU. Patches been sent that fix the QEMU issues [0], but a couple of them need to be fixed in the kernel's dt-bindings. The first patches add compatibles for "riscv,{clint,plic}0" which are present in drivers and the auto generated QEMU dtbs. Thanks to Rob Herring for reporting these issues [1], Conor. To reproduce the errors: ./build/qemu-system-riscv64 -nographic -machine virt,dumpdtb=qemu.dtb dt-validate -p /path/to/linux/kernel/Documentation/devicetree/bindings/processed-schema.json qemu.dtb (The processed schema needs to be generated first) 0 - https://lore.kernel.org/linux-riscv/20220810184612.157317-1-mail@conchuod.ie/ 1 - https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/ * fix-dt-validate: dt-bindings: riscv: add new riscv,isa strings for emulators dt-bindings: interrupt-controller: sifive,plic: add legacy riscv compatible dt-bindings: timer: sifive,clint: add legacy riscv compatible Link: https://lore.kernel.org/r/20220823183319.3314940-1-mail@conchuod.ie [Palmer: some cover letter pruning, and dropped #4 as suggested.] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-13dt-bindings: riscv: add new riscv,isa strings for emulatorsConor Dooley1-3/+2
The QEMU virt and spike machines currently export a riscv,isa string of "rv64imafdcsuh", While the RISC-V foundation has been ratifying a bunch of extenstions etc, the kernel has remained relatively static with what hardware is supported - but the same is not true of QEMU. Using the virt machine and running dt-validate on the dumped dtb fails, partly due to the unexpected isa string. Rather than enumerate the many many possbilities, change the pattern to a regex, with the following assumptions: - ima are required - the single letter order is fixed & we don't care about things that can't even do "ima" - the standard multi letter extensions are all in a "_z<foo>" format where the first letter of <foo> is a valid single letter extension - _s & _h are used for supervisor and hyper visor extensions - convention says that after the first two chars, a standard multi letter extension name could be an english word (ifencei anyone?) so it's not worth restricting the charset - as the above is just convention, don't apply any charset restrictions to reduce future churn - vendor ISA extensions begind with _x and have no charset restrictions - we don't care about an e extension from an OS pov - that attempting to validate the contents of the multiletter extensions with dt-validate beyond the formatting is a futile, massively verbose or unwieldy exercise at best The following limitations also apply: - multi letter extension ordering is not enforced. dt-schema does not appear to allow for named match groups, so the resulting regex would be even more of a headache - ditto for the numbered extensions Finally, add me as a maintainer of the binding so that when it breaks in the future, I can be held responsible! Reported-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/ Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Guo Ren <guoren@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220823183319.3314940-4-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-13dt-bindings: interrupt-controller: sifive,plic: add legacy riscv compatibleConor Dooley1-0/+5
While "real" hardware might not use the compatible string "riscv,plic0" it is present in the driver & QEMU uses it for automatically generated virt machine dtbs. To avoid dt-validate problems with QEMU produced dtbs, such as the following, add it to the binding. riscv-virt.dtb: plic@c000000: compatible: 'oneOf' conditional failed, one must be fixed: 'sifive,plic-1.0.0' is not one of ['sifive,fu540-c000-plic', 'starfive,jh7100-plic', 'canaan,k210-plic'] 'sifive,plic-1.0.0' is not one of ['allwinner,sun20i-d1-plic'] 'sifive,plic-1.0.0' was expected 'thead,c900-plic' was expected riscv-virt.dtb: plic@c000000: '#address-cells' is a required property Reported-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/ Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220823183319.3314940-3-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-13dt-bindings: timer: sifive,clint: add legacy riscv compatibleConor Dooley1-6/+12
While "real" hardware might not use the compatible string "riscv,clint0" it is present in the driver & QEMU uses it for automatically generated virt machine dtbs. To avoid dt-validate problems with QEMU produced dtbs, such as the following, add it to the binding. riscv-virt.dtb: clint@2000000: compatible:0: 'sifive,clint0' is not one of ['sifive,fu540-c000-clint', 'starfive,jh7100-clint', 'canaan,k210-clint'] Reported-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/ Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220823183319.3314940-2-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-13Merge tag 'dt-for-palmer-v6.1-mw1' of ↵Palmer Dabbelt1-6/+14
git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into for-next Microchip RISC-V devicetrees for v6.1 Fixups, reference design changes and new boards: - The addition of QSPI support for mpfs had a corresponding change to the devicetree node. - The v2022.{09,10} reference designs brought with them several memory map changes which are not backwards compatible. The old devicetrees from the v2022.08 and earlier releases still work with current kernels. - Two new devicetrees for a first-party development kit and for the Aries Embedded M100FPSEVP kit. - Corresponding dt-bindings changes for the above. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: microchip: fix fabric i2c reg size riscv: dts: microchip: update memory configuration for v2022.10 riscv: dts: microchip: add a devicetree for aries' m100pfsevp riscv: dts: microchip: add sevkit device tree riscv: dts: microchip: reduce the fic3 clock rate riscv: dts: microchip: icicle: re-jig fabric peripheral addresses riscv: dts: microchip: icicle: update pci address properties riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi riscv: dts: microchip: add pci dma ranges for the icicle kit dt-bindings: riscv: microchip: document the sev kit dt-bindings: riscv: microchip: document the aries m100pfsevp dt-bindings: riscv: microchip: document icicle reference design riscv: dts: microchip: add qspi compatible fallback Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-12Merge tag 'irq-core-2022-10-12' of ↵Linus Torvalds5-15/+151
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt updates from Thomas Gleixner: "Core code: - Provide a generic wrapper which can be utilized in drivers to handle the problem of force threaded demultiplex interrupts on RT enabled kernels. This avoids conditionals and horrible quirks in drivers all over the place - Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe Interrupt drivers: - A new driver for the FSL MU platform specific MSI implementation - Make irqchip_init() available for pure ACPI based systems - Provide a functional DT binding for the Realtek RTL interrupt chip - The usual DT updates and small code improvements all over the place" * tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) irqchip: IMX_MU_MSI should depend on ARCH_MXC irqchip/imx-mu-msi: Fix wrong register offset for 8ulp irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap dt-bindings: irqchip: Describe the IMX MU block as a MSI controller irqchip: Add IMX MU MSI controller driver dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END platform-msi: Export symbol platform_msi_create_irq_domain() irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() irqchip: Make irqchip_init() usable on pure ACPI systems bcma: gpio: Use generic_handle_irq_safe() gpio: mlxbf2: Use generic_handle_irq_safe() platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe() ssb: gpio: Use generic_handle_irq_safe() pinctrl: amd: Use generic_handle_irq_safe() ...
2022-10-12dt-bindings: mfd: mt6370: fix the interrupt order of the charger in the exampleChiaEn Wu1-2/+2
Fix the interrupt order of the charger in the binding example. Fixes: 76f52f815f1a ("dt-bindings: mfd: Add MediaTek MT6370") Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/fcf4e7e7594070a8698dc0d4b96e031bcaa9b3a3.1665585952.git.chiaen_wu@richtek.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-12dt-bindings: leds: mt6370: Fix MT6370 LED indicator DT warningChiaEn Wu1-3/+2
Add '$ref' and 'unevaluatedProperties: false' in 'multi-led', and remove unused 'allOf' property. Fixes: 440c57dabb45 ("dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator") Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/435f6888ebc20c5abae63eb9cb3a055b60db2ed1.1665050503.git.chiaen_wu@richtek.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-11dt-bindings: riscv: update microchip.yaml's maintainershipConor Dooley1-2/+2
Daire and I are the platform maintainers for Microchip's RISC-V FPGAs. Update the maintainers in microchip.yaml to reflect this and explicitly add the binding to the SoC's MAINTAINERS entry. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221010221704.2161221-3-conor@kernel.org/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-11Merge tag 'pci-v6.1-changes' of ↵Linus Torvalds5-26/+182
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. - Revert to a BAR assignment inherited from firmware only when the address is actually reachable via any upstream bridges, which fixes some cases where firmware doesn't configure all devices. - Add a sysfs interface to resize BARs so this can be done before assigning devices to a VM through VFIO. Power management: - Disable Precision Time Management for all devices on suspend to enable lower-power PM state. We previously did this just for Root Ports, which isn't enough because downstream devices can still generate PTM messages, which cause errors if it's disabled in the Root Port. - Save and restore the ASPM L1 PM Substates configuration for suspend/ resume. Previously this configuration was lost, so L1.x states likely stopped working after resume. - Check whether the L1 PM Substates Capability exists. If it didn't exist, we previously read junk and tried to configure L1 Substates based on that. - Fix the LTR_L1.2_THRESHOLD computation, which previously set a threshold for entering L1.2 that was too low in some cases. - Reduce the delay after transitions to or from D3cold by using usleep_range() rather than msleep(), which often slept for ~19ms instead of the 10ms normally required. The spec says 10ms is enough, but it's possible we could trip over devices that need a little more. Error handling: - Work around a BIOS bug that caused Intel Root Ports to advertise a Root Port Programmed I/O (RP PIO) log size of zero, which caused annoying warnings and prevented the kernel from dumping log registers for DPC errors. Qualcomm PCIe controller driver: - Add support for SC8280XP and SA8540P host controllers and SM8450 endpoint controller. - Disable Master AXI clock on endpoint controllers to save power when link is idle or in L1.x. - Expose link state transition counts via debugfs to help debug issues with low-power states. - Add auto-loading module support. Synopsys DesignWare PCIe controller driver: - Remove a dependency on ZONE_DMA32 by allocating the MSI target page differently. There's more work to do related to eDMA controllers, so it's not completely settled" * tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits) PCI: qcom-ep: Check platform_get_resource_byname() return value PCI: qcom-ep: Add support for SM8450 SoC dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC dt-bindings: PCI: qcom-ep: Define clocks per platform PCI: qcom-ep: Make PERST separation optional dt-bindings: PCI: qcom-ep: Make PERST separation optional PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic PCI: Expose PCIe Resizable BAR support via sysfs PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation PCI/ASPM: Ignore L1 PM Substates if device lacks capability PCI/ASPM: Factor out L1 PM Substates configuration PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS PCI: qcom-ep: Expose link transition counts via debugfs PCI: qcom-ep: Disable IRQs during driver remove PCI/ASPM: Save L1 PM Substates Capability for suspend/resume PCI/ASPM: Refactor L1 PM Substates Control Register programming PCI: qcom-ep: Make use of the cached dev pointer PCI: qcom-ep: Rely on the clocks supplied by devicetree PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() ...
2022-10-11Merge tag 'i2c-for-6.1-rc1-batch2' of ↵Linus Torvalds1-2/+21
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: - correct a variable type in the new pci1xxxx driver - add a new SoC to the qcom-cci driver - fix an issue with the designware driver which now got enough testing - the aspeed driver now handles busy target backends better * tag 'i2c-for-6.1-rc1-batch2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: aspeed: Assert NAK when slave is busy i2c: designware: Fix handling of real but unexpected device interrupts i2c: qcom-cci: Add MSM8226 compatible dt-bindings: i2c: qcom,i2c-cci: Document clocks for MSM8974 dt-bindings: i2c: qcom,i2c-cci: Document MSM8226 compatible i2c: microchip: pci1xxxx: Fix comparison of -EPERM against an unsigned variable
2022-10-11Merge tag 'pinctrl-v6.1-1' of ↵Linus Torvalds34-358/+1152
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...
2022-10-11Merge tag 'input-for-v6.1-rc0' of ↵Linus Torvalds15-132/+493
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for IBM Operational Panel - a new driver for PinePhone keyboards - RT5120 PMIC power key support - various enhancements and support for new models in xpad (Xbox) driver - a new compatible ID for Elan touchscreen driver - rework of adp5588-keys driver to support configuring via device properties (OF, ACPI, etc) instead of platform data, and proper support of optional gpiochip functionality (and removal of gpio-adp5588 driver) - improvements to firmware update handling in Synaptics RMI4 driver - support for double key matrix in mt6779-keypad - support for polled mode in adc-joystick driver - other assorted driver fixes, cleanups and improvements * tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits) Input: i8042 - fix refount leak on sparc Input: i8042 - add LoongArch support in i8042-acpipnpio.h Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h Input: pinephone-keyboard - support the proxied I2C bus Input: pinephone-keyboard - add PinePhone keyboard driver dt-bindings: input: Add the PinePhone keyboard binding dt-bindings: input: Convert hid-over-i2c to DT schema input: drop empty comment blocks Input: xpad - add X-Box Adaptive Profile button Input: add ABS_PROFILE to uapi and documentation Input: xpad - add X-Box Adaptive XBox button Input: xpad - add X-Box Adaptive support Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER" Input: ibm-panel - add missing MODULE_DEVICE_TABLE Input: icn8505 - utilize acpi_get_subsystem_id() Input: xpad - decipher xpadone packages with GIP defines Input: xpad - refactor using BIT() macro Input: synaptics-rmi4 - convert to use sysfs_emit() APIs Input: twl4030-pwrbutton - add missing of.h include Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 07:24:04 +0300