Age | Commit message (Collapse) | Author | Files | Lines |
|
Use my @kernel.org address everywhere.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240726-topic-konrad_email-v1-3-f94665da2919@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Some new drivers is the main part, the rest is cleanups and nonurgent
fixes.
Nothing much special about this, no core changes this time.
New drivers:
- Renesas RZ/V2H(P) SoC
- NXP Freescale i.MX91 SoC
- Nuvoton MA35D1 SoC
- Qualcomm PMC8380, SM4250, SM4250 LPI
Enhancements:
- A slew of scoped-based simplifications of of_node_put()"
* tag 'pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions
pinctrl: renesas: rzg2l: Clarify OEN read/write support
dt-bindings: pinctrl: pinctrl-single: Fix pinctrl-single,gpio-range description
dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function
dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties
pinctrl: freescale: Use scope based of_node_put() cleanups
pinctrl: equilibrium: Use scope based of_node_put() cleanups
pinctrl: ti: iodelay: Use scope based of_node_put() cleanups
pinctrl: qcom: lpass-lpi: increase MAX_NR_GPIO to 32
pinctrl: cy8c95x0: Update cache modification
pinctrl: cy8c95x0: Use cleanup.h
pinctrl: renesas: r8a779h0: Remove unneeded separators
pinctrl: renesas: r8a779g0: Add INTC-EX pins, groups, and function
pinctrl: renesas: r8a779g0: Remove unneeded separators
pinctrl: renesas: r8a779h0: Add AVB MII pins and groups
pinctrl: renesas: r8a779g0: Fix TPU suffixes
pinctrl: renesas: r8a779g0: Fix TCLK suffixes
pinctrl: renesas: r8a779g0: FIX PWM suffixes
pinctrl: renesas: r8a779g0: Fix IRQ suffixes
...
|
|
The binding is supposed to describe the properties of each element
of the pinctrl-single,gpio-range array entry, however when we use
"- items:" instead of "items:", it explicitly describes that there
is just a single entry in the array.
The pinctrl-single,gpio-range property should describe more than one
entry in the array. Fix the typo and adjust the alignment of the
description of the entries appropriately.
Fixes: 677a62482bd6 ("dt-bindings: pinctrl: Update pinctrl-single to use yaml")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20240627150610.469645-1-nm@ti.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the following missing pin group and mux function:
smb6b, smb6c, smb6d, smb7b, smb7c, smb7d, bu4, bu4b, bu5, bu5b, bu6,
gpo187.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/20240630090104.565779-1-tmaimon77@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The "pinctrl-single,input-schmitt" have four arguments in the bindings
but the driver needs two. According to the meaning of other properties
and driver, it should have "enable" suffix. Fortunately, there is no
dts using this property, so it is safe to correct this property with the
right name.
Rename existed property "pinctrl-single,input-schmitt" to
"pinctrl-single,input-schmitt-enable" and add the right description for
property "pinctrl-single,input-schmitt" used by the driver.
Fixes: 677a62482bd6 ("dt-bindings: pinctrl: Update pinctrl-single to use yaml")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/IA1PR20MB4953D5E7D7D68DDCE31C0031BBCF2@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
needed on the management controller side.
Add "NCSI" pin groups that are equivalent to the RMII pin groups, but
without the RMIIXRCLKO pin.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/20240621093142.698529-2-potin.lai.pt@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add device tree binding Documentation details for Qualcomm SM4250 LPASS
LPI(Low power Island) pinctrl device.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240612-sm4250-lpi-v4-1-a0342e47e21b@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Support specifying the function per-pin. The driver doesn't care
whether you use pins or groups for this purpose.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240610223550.2449230-2-sean.anderson@linux.dev
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
I3C1 and I3C2 become muxed functions in the mass production release of
the AST2600. Also document the USB2A device and USB2B HID mux options.
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dtb: pinctrl: usb2ad_default:function:0: 'USB2AD' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NR
I4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB
2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4']
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240531-dt-warnings-gpio-ast2600-pinctrl-funcs-groups-v1-3-a6fe2281a1b8@codeconstruct.com.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dtb: pinctrl@80: sgpm_default:groups:0: 'SGPM' is not one of ['ACPI', 'ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'DDCCLK', 'DDCDAT', 'ESPI', 'FWSPICS1', 'FWSPICS2', 'GPID0', 'GPID2', 'GPID4', 'GPID6', 'GPIE0', 'GPIE2', 'GPIE4', 'GPIE6', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'LAD0', 'LAD1', 'LAD2', 'LAD3', 'LCLK', 'LFRAME', 'LPCHC', 'LPCPD', 'LPCPLUS', 'LPCPME', 'LPCRST', 'LPCSMI', 'LSIRQ', 'MAC1LINK', 'MAC2LINK', 'MDIO1', 'MDIO2', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PNOR', 'PWM0', 'PWM1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'RGMII1', 'RGMII2', 'RMII1', 'RMII2', 'RXD1', '
RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SCL1', 'SCL2', 'SD1', 'SD2', 'SDA1', 'SDA2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1CS1', 'SPI1DEBUG', 'SPI1PASSTHRU', 'SPI2CK', 'SPI2CS0', 'SPI2CS1', 'SPI2MISO', 'SPI2MOSI', 'TIMER3', 'TIMER4', 'TIMER5', 'TIMER6', 'TIMER7', 'TIMER8', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART6', 'USB11BHID', 'USB2AD', 'USB2AH', 'USB2BD', 'USB2BH', 'USBCKI', 'VGABIOSROM', 'VGAHS', 'VGAVS', 'VPI24', 'VPO', 'WDTRST1', 'WDTRST2']
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240531-dt-warnings-gpio-ast2600-pinctrl-funcs-groups-v1-2-a6fe2281a1b8@codeconstruct.com.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The expansion makes the documents a lot longer, but it's easier to
review changes to functions and groups when we're not having to deal
with line wrapping.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240531-dt-warnings-gpio-ast2600-pinctrl-funcs-groups-v1-1-a6fe2281a1b8@codeconstruct.com.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.11
- Add support for the new RZ/V2H(P) (R9A09G057) Soc,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
PMC8380 is a new PMIC used with X1 SoCs. Document it
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240525-topic-pmc8380_gpio-v2-1-2de50cb28ac1@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add documentation to describe nuvoton ma35d1 pin control and GPIO.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240521012447.42211-3-ychuang570808@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
i.MX91 and i.MX93 share similar design. They could share same dt-binding
doc, so rename fsl,imx93-pinctrl.yaml to fsl,imx9-pinctrl.yaml and add
i.MX91 compatible string
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240513-imx91-pinctrl-v1-1-c99a23c6843a@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The binding for PM8008 is being reworked so that internal details like
interrupts and register offsets are no longer described. This
specifically also involves dropping the gpio child node and its
compatible string which is no longer needed.
Note that there are currently no users of the upstream binding and
driver.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240529162958.18081-10-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add documentation for the pin controller found on the Renesas RZ/V2H(P)
(R9A09G057) SoC. The RZ/V2H PFC varies slightly compared to the RZ/G2L
family:
- Additional bits need to be set during pinmuxing,
- The GPIO pin count is different.
Hence, a SoC-specific compatible string, 'renesas,r9a09g057-pinctrl', is
added for the RZ/V2H(P) SoC.
Also, add the 'renesas,output-impedance' property. The drive strength
settings on RZ/V2H(P) depend on the different power rails coming out from
the PMIC (connected via I2C). These power rails (required for drive
strength) can be 1.2V, 1.8V, or 3.3V.
Pins are grouped into 4 groups:
Group 1: Impedance
- 150/75/38/25 ohms (at 3.3V)
- 130/65/33/22 ohms (at 1.8V)
Group 2: Impedance
- 50/40/33/25 ohms (at 1.8V)
Group 3: Impedance
- 150/75/37.5/25 ohms (at 3.3V)
- 130/65/33/22 ohms (at 1.8V)
Group 4: Impedance
- 110/55/30/20 ohms (at 1.8V)
- 150/75/38/25 ohms (at 1.2V)
The 'renesas,output-impedance' property, as documented, can be
[0, 1, 2, 3], these correspond to register bit values that can
be set in the PFC_IOLH_mn register, which adjusts the drive
strength value and is pin-dependent.
As power rail information may not be available very early in the boot
process, the 'renesas,output-impedance' property is added instead of
reusing the 'output-impedance-ohms' property.
Also, allow bias-disable, bias-pull-down and bias-pull-up properties
as these can be used to configure the pins.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240606085133.632307-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Drop the bogus check from object as this didn't really add restriction
check.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240423175900.702640-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.10
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix "comptaible" typo in if schema for qcom,pmih0108-gpio.
Fixes: 6acc46f8c065 ("dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIH0108 and PMD8028 support")
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20240425185603.3295450-1-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
MT7622 pinctrl has ANTSEL* pins. Linux support for those was added in
the commit 19f599e83ac5 ("pinctrl: mediatek: mt7622: add antsel
pins/groups"). Include them in binding.
Cc: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-2-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some properties (function groups & pins) are meant to be arrays and
should allow multiple entries out of enum sets. Use "items" for those.
Mistake was noticed during validation of in-kernel DTS files.
Fixes: b9ffc18c6388 ("dt-bindings: mediatek: convert pinctrl to yaml")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-1-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The pin controller on Google Tensor gs101 requires a bus clock for
register access to work. Add it.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240426-samsung-pinctrl-busclock-v3-1-adb8664b8a7e@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.10
- Add external interrupt pin groups on R-Car V4M,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard
and HP TouchPad. It works the same as all others, so just add the
compatible string for this variant.
Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Message-ID: <20240417073532.3718510-1-github.com@herrie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow specifying a GPIO hog, as already used on
qcom-msm8974-lge-nexus5-hammerhead.dts.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240409-qcom-pmic-gpio-hog-v2-1-5ff812d2baed@z3ntu.xyz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow specifying pin to GPIO mapping. It can be find in in-Linux DTS
file for MT7622.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240408105128.30586-1-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include compatible strings for PMIH0108 and PMD8028 PMICs.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240326220628.2392802-3-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include compatible strings for PMXR2230 and PM6450 PMICs.
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Acked-by: Krzystof Kozlowski <krzystof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240326220628.2392802-2-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some functions were consolidated in the SM4450 pinctrl driver, but they
had not been updated in the binding file before the previous SM4450
pinctrl patch series was merged.
Update functions in this binding file to match with SM4450 pinctrl
driver. Some functions need to be consolidated and some functions need
to be removed.
The following functions are removed:
- atest_char0, atest_char1, atest_char2, atest_char3
- atest_usb00, atest_usb01, atest_usb02, atest_usb03
- audio_ref
- cci_async
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4
- cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3
- coex_uart1
- cri_trng0, cri_trng1
- dbg_out
- ddr_pxi0, ddr_pxi1
- dp0_hot
- gcc_gp1, gcc_gp2, gcc_gp3
- ibi_i3c
- jitter_bist
- mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3
- mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0,
mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1
- nav_gpio0, nav_gpio1, nav_gpio2
- phase_flag0, phase_flag1, phase_flag10, phase_flag11, phase_flag12,
phase_flag13, phase_flag14, phase_flag15, phase_flag16,
phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
phase_flag21, phase_flag22, phase_flag23, phase_flag24,
phase_flag25, phase_flag26, phase_flag27, phase_flag28,
phase_flag29, phase_flag3, phase_flag30, phase_flag31, phase_flag4,
phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9
- pll_bist, pll_clk
- prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3
- qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12,
qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, qdss_gpio3,
qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8,
qdss_gpio9
- qlink0_wmss
- qup0_se5, qup0_se6, qup0_se7, qup1_se5, qup1_se6
- sd_write
- tb_trig
- tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3
- tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3
- tsense_pwm1, tsense_pwm2
- uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
uim1_present, uim1_reset
- usb0_hs, usb0_phy
- vsense_trigger
The following functions are added:
- atest_char
- atest_usb0
- audio_ref_clk
- cci
- cci_async_in0
- cmu_rng
- coex_uart1_rx, coex_uart1_tx
- dbg_out_clk
- ddr_pxi0_test, ddr_pxi1_test
- gcc_gp1_clk, gcc_gp2_clk, gcc_gp3_clk
- ibi_i3c_qup0, ibi_i3c_qup1
- jitter_bist_ref
- mdp_vsync
- nav
- phase_flag
- pll_bist_sync, pll_clk_aux
- prng_rosc
- qlink0_wmss_reset
- sd_write_protect
- tb_trig_sdc1, tb_trig_sdc2
- tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, tgu_ch3_trigout
- tmess_prng
- tsense_pwm1_out, tsense_pwm2_out
- uim0, uim1
- usb0_hs_ac, usb0_phy_ps
- vsense_trigger_mirnat
- wlan1_adc_dtest0, wlan1_adc_dtest1
Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240312025807.26075-3-quic_tengfan@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
'output-enable' properties
On the RZ/G3S SMARC platform, the 'input' property is utilized in
gpio-hog nodes, and the 'output-enable' property is used for ETH0/1 TXC
pins. Update the binding documentation to include these properties,
addressing the following dtbs_check warnings:
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: pinctrl@11030000: key-1-gpio-hog: 'anyOf' conditional failed, one must be fixed:
'input' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: pinctrl@11030000: eth0: 'anyOf' conditional failed, one must be fixed:
'output-enable' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240313083828.5048-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
|
|
Use compatible name "qcom,sm4450-tlmm" instead of "qcom,sm4450-pinctrl"
to match the compatible name in sm4450 pinctrl driver.
Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240129092512.23602-2-quic_tengfan@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add bindings for the Awinic AW9523/AW9523B I2C GPIO Expander driver.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210624214458.68716-1-mail@david-bauer.net
[Fixed up minor bugs found by new checking tools]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert i.MX6UL pinctrl bindings to YAML.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240226212740.2019837-2-sre@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add device tree binding for SAM9X7 pin controller.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240223172531.671993-1-varshini.rajendran@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add dt-schema type bindings for the Mobileye EyeQ5 pin controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240227-mbly-clk-v8-1-c57fbda7664a@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.9 (take two)
- Add support for the R-Car V4M (R8A779H0) SoC,
- Add support for suspend/resume on the RZ/G2L family,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Document support for the Pin Function Controller (PFC) in the Renesas
R-Car V4M (R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/56685dc04af3cee7cb3751e855ed5b3679b14122.1706264667.git.geert+renesas@glider.be
|
|
Update maxItems to 60 for gpio-reserved-ranges to allow multiple gpio
reserved ranges.
Add input-enable property to allow configuring a pin as input.
Also update example.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240206112501.715042-1-naresh.solanki@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The structure of the NVIDIA Tegra234 common pinmux schema doesn't work
for restricting properties because a child node schema can't be extended
with additional properties from another schema defining the same child
node. The 2 child node schemas are evaluated independently as the
schemas are not recursively combined in any way.
As the common schema is almost all the child node schema anyways, just
remove the parent node from the common schema. Then add 'reg' and adjust
the $ref's in the users of the common schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240202223454.1667383-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Compatible string doesn't really match with compatible string listed in the
driver itself. While binding was converted from txt to yaml
xlnx,zynq-pinctrl was listed as compatible string but example was using
xlnx,pinctrl-zynq and also this string is used in all DTSes.
xlnx,zynq-pinctrl is used only in dt binding and not present in any DT
which is stable for quite a long time that's why use old compatible string
and update binding document instead of starting to use unused compatible
string.
Fixes: 153df45acda0 ("dt-bindings: pinctrl: pinctrl-zynq: Convert to yaml")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/c1307a4dd5e30290acacc786cb2170deb9eaa539.1706087258.git.michal.simek@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
pincfg-node.yaml already defines the type for "slew-rate", so drop the
type from the nuvoton,npcm845-pinctrl binding.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240124190106.1540585-2-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
nuvoton,npcm845-pinctrl defines the common "input-debounce" property as
an array rather than an scalar. Update the common definition to expand
it to an uint32-array, and update all the users of the property with
array constraints.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240124190106.1540585-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Regular expression used to match the unit address part should not allow
non-hex numbers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123083511.21063-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"For this kernel cycle I managed an immutable branch for the PEF2256
WAN framer that has some pin control portions. It already landed in
your tree through the net pull request but here it is mentioned again.
The most interesting is perhaps the Samsung Exynos subdrivers for the
Tensor SoC used in Google Pixel 6 and the ExynosAuto subdriver for
automotive. Along with the earlier merged Tesla FSD subdriver it shows
some of the versatile uses of the Samsung Exynos silicon. It is also
used in the latest version of Axis Communications ARTPEC chips so it
is a very widely deployed SoC family.
We also have the Intel Meteor Lake SoC which I think is for laptops.
It's a pretty interesting chip with Xe graphics and integrated PCH.
Core changes:
- A new PINCTRL_GROUP_DESC() infrastructure macro is added and used
in different drivers, generic group description struct group_desc
is now used all over the place.
New drivers:
- New driver for the Texas Instruments TPS6494 Power Management IC.
- New driver for the Lantic PEF2256 framer pin multiplexer. This IC
has some pins that can be reconfigured in different ways. The
actual driver comes on an immutable branch with the net WAN parts,
the IC is some latest-and-greatest serial line funnel for e.g.
wireless access points.
- New subdriver for the Samsung Exynos Auto V920 pin controller, used
for automotive applications.
- New subdriver for the Samsung "GS101" SoC pin controller, this is
the Google "Tensor" SoC used in the Google Pixel 6.
- New subdriver for the Intel Meteor Point SoC pin controller.
- New subdriver for the Qualcomm SM8650 top level (TLMM) and LPASS
pin controllers.
- New subdriver for the Qualcomm X1E80100 top level (TLMM) pin
controller.
- New subdriver for the Qualcomm SM4450 top level (TLMM) pin
controller.
- The "single" pin controller now supports the Texas Instruments
J7200 SoC.
Improvements:
- Intel has created a new (Intel-)generic pin controller driver that
is now used by all contemporary Intel platforms.
- Intel is now also making use of some cleanup helpers.
- Enble 910 Ohm bias in the Intel Tangier driver.
- The Samsung driver now suppors irq_set_affinity() in it's IRQ chip
giving support for non wake up external gpio interrupts"
* tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits)
pinctrl: samsung: constify iomem pointers
pinctrl: cy8c95x0: Cache muxed registers
dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp
pinctrl: qcom: lpass-lpi: remove duplicated include
dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent
dt-bindings: pinctrl: qcom: drop common properties
dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings
dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom: create common LPASS LPI schema
pinctrl: qcom: sm4450: dd SM4450 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
dt-bindings: pinctrl: qcom,pmic-mpp: clean up example
pinctrl: intel: Add Intel Meteor Point pin controller and GPIO support
pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
pinctrl: renesas: rzg2l: Add output enable support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings
to schemas
- Improvements in Samsung GPU schemas
- A few more cases of dropping unneeded quotes in schemas
- Merge QCom idle-states txt binding into common idle-states schema
- Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain
Controller
- Add NXP i.mx8dl to SCU PD
- Add synaptics r63353 panel controller
- Clarify the wording around the use of 'wakeup-source' property
- Add a DTS coding style doc
- Add smi vendor prefix
- Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel
tree
- Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present
- Fix double free in of_parse_phandle_with_args_map()
- A couple of kerneldoc fixes
* tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits)
of: unittest: Fix of_count_phandle_with_args() expected value message
dt-bindings: fpga: altera: Convert bridge bindings to yaml
dt-bindings: fpga: Convert bridge binding to yaml
dt-bindings: vendor-prefixes: Add smi
dt-bindings: power: Clarify wording for wakeup-source property
of: Fix double free in of_parse_phandle_with_args_map
dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
drivers: of: Fixed kernel doc warning
dt-bindings: tpm: Document Microsoft fTPM bindings
dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
dt-bindings: tpm: Consolidate TCG TIS bindings
dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
dt-bindings: arm: Add remote etm dt-binding
dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
dt-bindings: display: panel: Add synaptics r63353 panel controller
dt-bindings: arm: merge qcom,idle-state with idle-state
dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
...
|
|
Anything ending with gpio/gpios is taken as gpio phande/description which
is reported as the issue coming from gpio-consumer.yaml schema.
That's why rename the gpio suffix to gpio-grp to avoid name collision.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/2e3a1f1f57cf929bd05115bc081e6d01d5a53443.1702996859.git.michal.simek@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Drop common properties already defined in referenced common Qualcomm SoC
TLMM bindings and use "unevaluatedProperties: false". This makes the
binding smaller and easier to review. Additionally this allows now
"wakeup-parent" property coming from common TLMM bindings.
In few places move the "required:" block to bottom, to match convention.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Drop common properties already defined in referenced common Qualcomm SoC
TLMM bindings and use "unevaluatedProperties: false". This makes the
binding smaller and easier to review.
In few places move the "required:" block to bottom, to match convention.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208215534.195854-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|