summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/phy
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18dt-bindings: phy: g12a-usb2-phy: fix compatible string documentationHeiner Kallweit1-4/+4
The compatible strings in the driver don't have the meson prefix. Fix this in the documentation and rename the file accordingly. Fixes: da86d286cce8 ("dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/8d960029-e94d-224b-911f-03e5deb47ebc@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentationHeiner Kallweit1-3/+3
The compatible string in the driver doesn't have the meson prefix. Fix this in the documentation and rename the file accordingly. Fixes: 87a55485f2fc ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/0a82be92-ce85-da34-9d6f-4b33034473e5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"Marijn Suijten1-1/+0
This reverts commit 557a28811c7e0286d3816842032db5eb7bb5f156. This commit introduced an init sequence from downstream DT [1] in the driver. As mentioned by the comment above the HSPHY_INIT_CFG macro for this sequence: /* * The macro is used to define an initialization sequence. Each tuple * is meant to program 'value' into phy register at 'offset' with 'delay' * in us followed. */ Instead of corresponding to offsets into the phy register, the sequence read by the downstream driver [2] is passed into ulpi_write [3] which crafts the address-value pair into a new value and writes it into the same register at USB_ULPI_VIEWPORT [4]. In other words, this init sequence is programmed into the hardware in a totally different way than downstream and is unlikely to achieve the desired result, if the hsphy is working at all. An alternative method needs to be found to write these init values at the desired location. Fortunately mdm9607 did not land upstream yet [5] and should have its compatible revised to use the generic one, instead of a compatible that writes wrong data to the wrong registers. [1]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/arch/arm/boot/dts/qcom/mdm9607.dtsi#585 [2]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#4183 [3]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#468 [4]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#418 [5]: https://lore.kernel.org/linux-arm-msm/20210805222812.40731-1-konrad.dybcio@somainline.org/ Reported-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20221214223733.648167-1-marijn.suijten@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-20Merge tag 'devicetree-for-6.2-2' of ↵Linus Torvalds19-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more devicetree updates from Rob Herring: "This is mostly a treewide clean-up from Krzysztof. There's also a couple of fixes and things that fell thru the cracks. I must say this has been a nice merge window without bindings dumped in at the last minute introducing warnings. Summary: - Treewide dropping of redundant 'binding' or 'schema' from schema titles. This will be followed up with a automated check to catch these. - Re-sort vendor-prefies - Convert GPIO based watchdog to schema - Handle all the variations for clocks, resets, power domains in i.MX PCIe binding - Document missing 'power-domains' property in mxsfb - Fix error with path references in Tegra XUSB example - Honor CONFIG_CMDLINE* even without /chosen node" * tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: drop redundant part of title (manual) dt-bindings: clock: drop redundant part of title dt-bindings: drop redundant part of title (beginning) dt-bindings: drop redundant part of title (end, part three) dt-bindings: drop redundant part of title (end, part two) dt-bindings: drop redundant part of title (end) dt-bindings: clock: st,stm32mp1-rcc: add proper title dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title dt-bindings: drop redundant part of title of shared bindings dt-bindings: watchdog: gpio: Convert bindings to YAML dt-bindings: imx6q-pcie: Handle more resets on legacy platforms dt-bindings: imx6q-pcie: Handle various PD configurations dt-bindings: imx6q-pcie: Handle various clock configurations dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property dt-bindings: vendor-prefixes: sort entries alphabetically dt-bindings: usb: tegra-xusb: Remove path references of: fdt: Honor CONFIG_CMDLINE* even without /chosen node
2022-12-19Merge tag 'phy-for-6.2' of ↵Linus Torvalds14-49/+626
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This tme we have again a big pile of qcom-qmp-* changes, one new driver and bunch of new hardware support. New hardware support: - Allwinner H616 USB PHY and A100 DPHY support - TI J721s2, J784s4 and J721e support - Freescale i.MX8MP PCIe PHY support - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 - Qualcomm SM8450 PCIe1 PHY support in EP mode - Qualcomm SC8280XP PCIe PHY support (including x4 mode) - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings Updates: - A big pile of updates on qcom-qmp-* drivers following the driver split and reorganization merged earlier - Phy order of API calls documentation update" * tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits) phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support dt-bindings: phy-j721e-wiz: add j721s2 compatible string phy: use devm_platform_get_and_ioremap_resource() phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property phy: qcom-qmp-pcie: drop redundant clock allocation phy: qcom-qmp-usb: drop redundant clock allocation phy: qcom-qmp: drop unused type header phy: qcom-qmp-usb: drop sc8280xp reference-clock source dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source phy: qcom-qmp-combo: add support for updated sc8280xp binding phy: qcom-qmp-combo: rename DP_PHY register pointer phy: qcom-qmp-combo: rename common-register pointers phy: qcom-qmp-combo: clean up DP clock callbacks phy: qcom-qmp-combo: separate clock and provider registration phy: qcom-qmp-combo: add clock registration helper ...
2022-12-16dt-bindings: drop redundant part of title (manual)Krzysztof Kozlowski1-1/+1
The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding" or a "schema", but instead just describe the hardware. Manual updates to various binding titles, including capitalizing them. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # opp Link: https://lore.kernel.org/r/20221216163815.522628-10-krzysztof.kozlowski@linaro.org [robh: add trivial-devices.yaml and net/can/microchip,mcp251xfd.yaml] Signed-off-by: Rob Herring <robh@kernel.org>
2022-12-16dt-bindings: drop redundant part of title (end, part three)Krzysztof Kozlowski14-14/+14
The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-12-16dt-bindings: drop redundant part of title (end, part two)Krzysztof Kozlowski3-3/+3
The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "Node|Tree|Generic bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [nN]ode [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [tT]ree [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [gG]eneric [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\? description\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\? document\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Vinod Koul <vkoul@kernel.org> # phy Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221216163815.522628-6-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-12-16dt-bindings: drop redundant part of title (end)Krzysztof Kozlowski1-1/+1
The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Drop trailing "Devicetree bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-12-16Merge tag 'usb-6.2-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver updates from Greg KH: "Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1. Overall, thanks to the removal of a driver, more lines were removed than added, a nice change. Highlights include: - removal of the sisusbvga driver that was not used by anyone anymore - minor thunderbolt driver changes and tweaks - chipidea driver updates - usual set of typec driver features and hardware support added - musb minor driver fixes - fotg210 driver fixes, bringing that hardware back from the "dead" - minor dwc3 driver updates - addition, and then removal, of a list.h helper function for many USB and other subsystem drivers, that ended up breaking the build. That will come back for 6.3-rc1, it missed this merge window. - usual xhci updates and enhancements - usb-serial driver updates and support for new devices - other minor USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits) usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags usb: dwc2: power on/off phy for peripheral mode in dual-role mode usb: dwc2: disable lpm feature on Rockchip SoCs dt-bindings: usb: mtk-xhci: add support for mt7986 usb: dwc3: core: defer probe on ulpi_read_id timeout usb: ulpi: defer ulpi_register on ulpi_read_id timeout usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller dt-bindings: vendor-prefixes: add Genesys Logic usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe() usb: typec: tipd: Set mode of operation for USB Type-C connector usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST usb: musb: remove extra check in musb_gadget_vbus_draw usb: gadget: uvc: Prevent buffer overflow in setup handler usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() usb: storage: Add check for kcalloc USB: sisusbvga: use module_usb_driver() USB: sisusbvga: rename sisusb.c to sisusbvga.c USB: sisusbvga: remove console support ...
2022-11-24dt-bindings: phy-j721e-wiz: add j721s2 compatible stringMatt Ranostay1-0/+1
Add ti,j721s2-wiz-10g compatible string to binding documentation. Signed-off-by: Matt Ranostay <mranostay@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221123032413.1193961-2-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variantSamuel Holland1-0/+4
A100 features an updated DPHY, which moves PLL control inside the DPHY register space. (Previously PLL-MIPI was controlled from the CCU. This does not affect the "clocks" property because the link between PLL-MIPI and the DPHY was never represented in the devicetree.) It also requires a modified analog power-on sequence. Finally, the new DPHY adds support for operating as an LVDS PHY. D1 uses this same variant. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20221114022113.31694-5-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts propertySamuel Holland1-0/+7
The sun6i DPHY can generate several interrupts, mostly for reporting error conditions, but also for detecting BTA and UPLS sequences. Document this capability in order to accurately describe the hardware. The DPHY has no interrupt number provided in the vendor documentation because its interrupt line is shared with the DSI controller. A trivial interrupt handler was used to verify that interrupts were in fact generated by the DPHY and not the DSI controller. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221114022113.31694-2-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock sourceJohan Hovold1-5/+2
The source clock for the reference clock is not used by the PHY directly and should not be included in the devicetree binding. Fixes: e8e58e29a0c9 ("dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221111093857.11360-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24dt-bindings: phy: qcom,qmp-usb3-dp: fix sc8280xp bindingJohan Hovold2-12/+99
The current QMP USB3-DP PHY bindings are based on the original MSM8996 binding which provided multiple PHYs per IP block and these in turn were described by child nodes. The QMP USB3-DP PHY block provides a single multi-protocol PHY and even if some resources are only used by either the USB or DP part of the device there is no real benefit in describing these resources in child nodes. The original MSM8996 binding also ended up describing the individual register blocks as belonging to either the wrapper node or the PHY child nodes. This is an unnecessary level of detail which has lead to problems when later IP blocks using different register layouts have been forced to fit the original mould rather than updating the binding. The bindings are arguable also incomplete as they only the describe register blocks used by the current Linux drivers (e.g. does not include the PCS LANE registers). This is specifically true for later USB4-USB3-DP QMP PHYs where the TX registers are used by both the USB3 and DP parts of the PHY (and where the USB4 part of the PHY was not covered by the binding at all). Notably there are also no DP "RX" (sic) registers as described by the current bindings and the DP "PCS" region is really a set of DP_PHY registers. Add a new binding for the USB4-USB3-DP QMP PHYs found on SC8280XP which further bindings can be based on. Note that the binding uses a PHY index to access either the USB3 or DP part of the PHY and that this can later be used also for the USB4 part if needed. Similarly, the clock inputs and outputs can later be extended to support USB4. Also note that the current binding is simply removed instead of being deprecated as it was only recently merged and would not allow for supporting DP mode. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24dt-bindings: phy: qcom,qmp-usb3-dp: rename current bindingsJohan Hovold1-3/+10
The current QMP USB3-DP PHY bindings are based on the original MSM8996 binding which provided multiple PHYs per IP block and these in turn were described by child nodes. The QMP USB3-DP PHY block provides a single multi-protocol PHY and even if some resources are only used by either the USB or DP part of the device there is no real benefit in describing these resources in child nodes. The original MSM8996 binding also ended up describing the individual register blocks as belonging to either the wrapper node or the PHY child nodes. This is an unnecessary level of detail which has lead to problems when later IP blocks using different register layouts have been forced to fit the original mould rather than updating the binding. The bindings are arguable also incomplete as they only the describe register blocks used by the current Linux drivers (e.g. does not include the PCS_LANE registers). In preparation for adding new bindings for SC8280XP which further bindings can be based on, rename the current schema file after SC7180, which was the first supported platform, and add a reference to the SC8280XP bindings. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-10dt-bindings: phy: renesas: Document Renesas Ethernet SERDESYoshihiro Shimoda1-0/+54
Document Renesas Etherent SERDES for R-Car S4-8 (r8a779f0). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221108005500.3011449-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-10dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindingsJohan Hovold1-0/+165
Add bindings for the PCIe QMP PHYs found on SC8280XP. The PCIe2 and PCIe3 controllers and PHYs on SC8280XP can be used in 4-lane mode or as separate controllers and PHYs in 2-lane mode (e.g. as PCIe2A and PCIe2B). The configuration for a specific system can be read from a TCSR register. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221105145939.20318-12-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-10dt-bindings: phy: qcom,qmp-pcie: rename current bindingsJohan Hovold1-2/+5
The current QMP PCIe PHY bindings are based on the original MSM8996 binding which provided multiple PHYs per IP block and these in turn were described by child nodes. Later QMP PCIe PHY blocks only provide a single PHY and the remnant child node does not really reflect the hardware. The original MSM8996 binding also ended up describing the individual register blocks as belonging to either the wrapper node or the PHY child nodes. This is an unnecessary level of detail which has lead to problems when later IP blocks using different register layouts have been forced to fit the original mould rather than updating the binding. The bindings are arguable also incomplete as they only the describe register blocks used by the current Linux drivers (e.g. does not include the per lane PCS registers). In preparation for adding new bindings for SC8280XP which further bindings can be based on, rename the current schema file after IPQ8074, which was the first SoC added to the bindings after MSM8996 (which has already been split out), and add a reference to the SC8280XP bindings. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221105145939.20318-11-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-07dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J721eSiddharth Vadapalli1-6/+42
TI's J721e SoC supports additional PHY modes like QSGMII and SGMII that are not supported on earlier SoCs. Add a compatible for it. Extend ti,qsgmii-main-ports property to support selection of upto two main ports at once across the two QSGMII interfaces. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221026074532.109220-2-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-07dt-bindings: phy: Add special clock for Allwinner H616 PHYAndre Przywara1-0/+26
The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves some resources from port 2's PHY and HCI IP. In particular the PMU clock for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL register of port 2. To allow each USB port to be controlled independently of port 2, we need a handle to that particular PMU clock in the *PHY* node, as the HCI and PHY part might be handled by separate drivers. Add that clock to the requirements of the H616 PHY binding, so that a PHY driver can apply the quirk in isolation, without requiring help from port 2's HCI driver. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221031111358.3387297-3-andre.przywara@arm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-05dt-bindings: phy: qcom,qmp-usb: fix sc8280xp bindingJohan Hovold2-13/+105
The current QMP USB PHY bindings are based on the original MSM8996 PCIe PHY binding which provided multiple PHYs per IP block and these in turn were described by child nodes. The QMP USB PHY block only provide a single PHY and the remnant child node does not really reflect the hardware. The original MSM8996 binding also ended up describing the individual register blocks as belonging to either the wrapper node or the PHY child nodes. This is an unnecessary level of detail which has lead to problems when later IP blocks using different register layouts have been forced to fit the original mould rather than updating the binding. The bindings are arguable also incomplete as they only the describe register blocks used by the current Linux drivers (e.g. does not include the per lane PCS registers). Note that PCS_USB region is also not described by the current bindings despite being used by the driver and this has led to people increasing the size of the PCS region in the devicetree so that it includes PCS_USB registers even though other regions like TX and RX may lie in between. Add a new binding for the QMP USB PHYs found on SC8280XP which further bindings can be based on. Note that this also fixes the SC8280XP "phy_phy" reset name. Also note that the current binding is simply removed instead of being deprecated as it was only recently merged and support for SC8280XP is still under development. And, specifically, there is no support in mainline for the multiport controller that uses these PHYs. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221028160435.26948-12-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-05dt-bindings: phy: qcom,qmp-usb: rename current bindingsJohan Hovold1-2/+5
The current QMP USB PHY bindings are based on the original MSM8996 binding which provided multiple PHYs per IP block and these in turn were described by child nodes. Later QMP USB PHY blocks only provide a single PHY and the remnant child node does not really reflect the hardware. The original MSM8996 binding also ended up describing the individual register blocks as belonging to either the wrapper node or the PHY child nodes. This is an unnecessary level of detail which has lead to problems when later IP blocks using different register layouts have been forced to fit the original mould rather than updating the binding. The bindings are arguable also incomplete as they only the describe register blocks used by the current Linux drivers (e.g. does not include the per lane PCS registers). In preparation for adding new bindings for SC8280XP which further bindings can be based on, rename the current bindings after MSM8996 and add a reference to the SC8280XP bindings. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221028160435.26948-11-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28dt-bindings: phy: qcom,qmp-ufs: fix sc8280xp bindingJohan Hovold2-6/+87
The current QMP UFS PHY bindings are based on the original MSM8996 PCIe PHY binding which provided multiple PHYs per IP block and these in turn were described by child nodes. The QMP UFS PHY block only provide a single PHY and the remnant child node does not really reflect the hardware. The original MSM8996 binding also ended up describing the individual register blocks as belonging to either the wrapper node or the PHY child nodes. This is an unnecessary level of detail which has lead to problems when later IP blocks using different register layouts have been forced to fit the original mould rather than updating the binding. The bindings are arguable also incomplete as they only the describe register blocks used by the current Linux drivers. Add a new binding for the UFS QMP PHYs found on SC8280XP which further bindings can be based on. Note that the current binding is simply removed instead of being deprecated as it was only recently merged and support for SC8280XP is still under development. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221024090041.19574-9-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28dt-bindings: phy: qcom,qmp-ufs: rename current bindingsJohan Hovold1-2/+5
The current QMP UFS PHY bindings are based on the original MSM8996 PCIe PHY binding which provided multiple PHYs per IP block and these in turn were described by child nodes. The QMP UFS PHY block only provide a single PHY and the remnant child node does not really reflect the hardware. The original MSM8996 binding also ended up describing the individual register blocks as belonging to either the wrapper node or the PHY child nodes. This is an unnecessary level of detail which has lead to problems when later IP blocks using different register layouts have been forced to fit the original mould rather than updating the binding. The bindings are arguable also incomplete as they only the describe register blocks used by the current Linux drivers. In preparation for adding new bindings for SC8280XP which further bindings can be based on, rename the current bindings after MSM8996 and add a reference to the SC8280XP bindings. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221024090041.19574-8-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-23dt-bindings: phy: imx8mq-usb: add power-domains propertyPeng Fan1-0/+3
Add optional power-domains property for usb phy. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221014095550.2125018-1-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-20dt-bindings: Remove "status" from schema examples, againRob Herring1-8/+7
There's no reason to have "status" properties in examples. "okay" is the default, and "disabled" turns off some schema checks ('required' specifically). A meta-schema check for this is pending, so hopefully the last time to fix these. Fix the indentation in intel,phy-thunderbay-emmc while we're here. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20221014205104.2822159-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-17dt-binding: phy: Add i.MX8MP PCIe PHY bindingRichard Zhu1-3/+13
Add i.MX8MP PCIe PHY binding. On i.MX8MM, the initialized default value of PERST bit(BIT3) of SRC_PCIEPHY_RCR is 1b'1. But i.MX8MP has one inversed default value 1b'0 of PERST bit. And the PERST bit should be kept 1b'1 after power and clocks are stable. So add one more PERST explicitly for i.MX8MP PCIe PHY. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Richard Leitner <richard.leitner@skidata.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1665625622-20551-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-17dt-bindings: phy-j721e-wiz: add j784s4 compatible stringMatt Ranostay1-0/+1
Add ti,j784s4-wiz-10g compatible string to binding documentation. Signed-off-by: Matt Ranostay <mranostay@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221015201123.195477-2-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-10Merge tag 'devicetree-for-6.1' of ↵Linus Torvalds29-61/+41
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ...
2022-10-08Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
2022-10-08Merge tag 'phy-for-6.1' of ↵Linus Torvalds26-678/+1676
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This contains bunch of new device support and one new Sunplus driver along with updates which include another big round of qmp phy conversion. New support: - Qualcomm SC8280XP eDP & DP and USB3 UNI phy (Bjorn Andersson) - Rockchip rk3568 inno dsidphy (Chris Morgan) - ocelot-serdes phy yaml binding (Colin Foster) - Renesas gen2-usb phy yaml binding (Geert Uytterhoeven) - RGMII suport in lan966x driver (Horatiu Vultur) - Qualcomm SM6375 usb snps-femto-v2 bindings (Konrad Dybcio) - Rockchip rk356x csi-dphya (Michael Riesch) - Qualcomm sdm670 usb2 bindings (Richard Acayan) - Sunplus USB2 PHY (Vincent Shih) Updates: - Mediatek hdmi, ufs, tphy and xsphy updates to use bitfield helpers (Chunfeng Yun) - Continued Qualcomm qmp phy driver split and cleanup. More patches are under review and expected that next cycle might see completion of this activity (Dmitry Baryshkov & Johan Hovold) - TI wiz driver support for j7200 10g (Roger Quadros) - Qualcomm femto phy driver support for override params to help with tuning (Sandeep Maheswaram) - SGMII support in TI wiz driver (Siddharth Vadapalli) - dev_err_probe simplification (Yuan Can)" * tag 'phy-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (170 commits) phy: phy-mtk-dp: make array driving_params static const dt-bindings: phy: qcom,qusb2: document sdm670 compatible phy: qcom-qmp-pcie: fix resource mapping for SDM845 QHP PHY phy: rockchip-snps-pcie3: only look for rockchip,pipe-grf on rk3588 phy: tegra: xusb: Enable usb role switch attribute phy: mediatek: fix build warning of FIELD_PREP() phy: qcom-qmp-usb: Use dev_err_probe() to simplify code phy: qcom-qmp-ufs: Use dev_err_probe() to simplify code phy: qcom-qmp-pcie-msm8996: Use dev_err_probe() to simplify code phy: qcom-qmp-combo: Use dev_err_probe() to simplify code phy: qualcomm: call clk_disable_unprepare in the error handling phy: intel: Use dev_err_probe() to simplify code phy: tegra: xusb: Use dev_err_probe() to simplify code phy: qcom-snps: Use dev_err_probe() to simplify code phy: qcom-qusb2: Use dev_err_probe() to simplify code phy: qcom-qmp-pcie: Use dev_err_probe() to simplify code phy: ti: phy-j721e-wiz: fix reference leaks in wiz_probe() phy: mediatek: mipi: remove register access helpers phy: mediatek: mipi: mt8183: use common helper to access registers phy: mediatek: mipi: mt8183: use GENMASK to generate bits mask ...
2022-10-05Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-3/+12
Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
2022-09-29dt-bindings: phy: qcom,qusb2: document sdm670 compatibleRichard Acayan1-0/+1
The Snapdragon 670 uses the QUSB driver for USB 2.0. Document the compatible used in the device tree. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220922024656.178529-2-mailingradian@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-26Merge 6.0-rc7 into usb-nextGreg Kroah-Hartman3-3/+3
We need the USB fixes in here for other follow-on changes to be able to be applied successfully. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22dt-bindings: phy: qcom,qusb2: document sdm670 compatibleRichard Acayan1-0/+1
The Snapdragon 670 uses the QUSB driver for USB 2.0. Document the compatible used in the device tree. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20220922024656.178529-2-mailingradian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-20dt-bindings: phy: mediatek,tphy: add property to set pre-emphasisChunfeng Yun1-0/+10
Add a property to set usb2 phy's pre-emphasis, which used to widen eye opening and boost eye swing. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220914060746.10004-2-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20dt-bindings: phy: mediatek,tphy: add support type of SGMIIChunfeng Yun1-0/+1
Add support ethernet SGMII, forgot to update type supported. Fixes: c01608b3b46b ("dt-bindings: phy: mediatek: tphy: support type switch by pericfg") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220914060746.10004-1-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20dt-bindings: phy: renesas,rcar-gen2-usb-phy: Convert to json-schemaGeert Uytterhoeven2-112/+123
Convert the Renesas R-Car Gen2 USB PHY Device Tree binding documentation to json-schema. Add missing properties. Rename the device node from "usb-phy" to "usb-phy-controller", as it does not represent a USB PHY itself, and thus does not have a "#phy-cells" property. Rename the child nodes from "usb-channel" to "usb-phy", as these do represent USB PHYs. Drop the second example, as it doesn't add any value. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/dbdcffd009302734fe2fb895ce04b72fa1ea4355.1663165000.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20dt-bindings: phy-rockchip-inno-dsidphy: add compatible for rk3568Chris Morgan1-0/+1
Add a compatible string for the rk3568 dsi-dphy. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220919164616.12492-2-macroalpha82@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20dt-bindings: phy: qcom,qmp-ufs: Fix SM6115 clocks, regsIskren Chernev1-1/+2
The Sm6115 UFS PHY has 2 clocks and 3 regs. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220919180618.1840194-6-iskren.chernev@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-18dt-bindings: phy: qcom, hdmi-phy-qmp: add clock-cells and XO clockDmitry Baryshkov1-3/+12
As the QMP HDMI PHY is a clock provider, add constant #clock-cells property. For the compatibility with older DTs the property is not marked as required. Also add the XO clock to the list of the clocks used by the driver. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/492316/ Link: https://lore.kernel.org/r/20220704161148.814510-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-13dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200Siddharth Vadapalli1-0/+25
TI's J7200 SoC supports additional PHY modes like QSGMII and SGMII that are not supported on earlier SoCs. Add a compatible for it. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220912085650.83263-3-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-13dt-bindings: phy: ti: phy-gmii-sel: Cleanup exampleSiddharth Vadapalli1-1/+1
Change node name in example from "phy-gmii-sel" to "phy", following the device-tree convention of using generic node names. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220912085650.83263-2-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-13dt-bindings: phy: phy-rockchip-inno-usb2: add rockchip,rk3128-usb2phyJohan Jonker1-0/+1
Add rockchip,rk3128-usb2phy compatible string. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/d477a077-a68f-e752-5192-807db80a9e68@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-13dt-bindings: phy: ocelot-serdes: convert to YAMLColin Foster2-43/+56
Convert the phy-ocelot-serdes device tree binding to the new YAML format. Additionally, add the file to MAINTAINERS since the original file didn't exist. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220911163715.4036144-2-colin.foster@in-advantage.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-13dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindingsSandeep Maheswaram1-0/+88
Add device tree bindings for SNPS phy tuning parameters. Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/1662480933-12326-2-git-send-email-quic_kriskura@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-13dt-bindings: phy: qcom,qmp-usb3-dp: add missing power-domains propertyJohan Hovold1-0/+14
At least the "qcom,sc8280xp-qmp-usb43dp-phy" binding requires a power domain to be specified. Fixes: aa27597e594c ("dt-bindings: phy: qcom,qmp: Add compatible for SC8280XP USB phys") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220902080705.12050-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-13dt-bindings: phy: qcom,qmp-usb: add missing power-domains propertyJohan Hovold1-0/+13
At least the "sc8280xp-qmp-usb3-uni-phy" binding requires a power domain to be specified. Fixes: aa27597e594c ("dt-bindings: phy: qcom,qmp: Add compatible for SC8280XP USB phys") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220902080705.12050-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-12dt-bindings: phy: hisilicon,hi3670-usb3: simplify exampleKrzysztof Kozlowski1-18/+8
syscon and simple-mfd cannot be used without device specific compatible, so simplify the example to fix this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220817142246.828762-3-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-02 22:21:08 +0300