summaryrefslogtreecommitdiff
path: root/Documentation/ABI/testing/sysfs-bus-usb
AgeCommit message (Collapse)AuthorFilesLines
2015-08-18Revert "usb: interface authorization: Documentation part"Greg Kroah-Hartman1-22/+0
This reverts commit 6ef2bf71764708f7c58ee9300acd8df05dbaa06f as the signed-off-by address is invalid. Cc: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-15usb: interface authorization: Documentation partStefan Koch1-0/+22
This part adds the documentation for the interface authorization. Signed-off-by: Stefan Koch <skoch@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04Documentation: sysfs-bus-usb: s/CONFIG_PM_RUNTIME/CONFIG_PM/Valentin Rothberg1-6/+6
PM_RUNTIME has been replaced with PM by commit 464ed18ebdb6 ("PM: Eliminate CONFIG_PM_RUNTIME") hence substitute the reference on PM_RUNTIME with PM and re-arrange the text to 80 column break. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23usbcore: add sysfs support to xHCI usb3 hardware LPMKevin Strasser1-0/+14
Add a sysfs node to make it easier to verify if LPM is supported and being enabled for USB 3.0 devices. Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-04USB / PM: Drop CONFIG_PM_RUNTIME from the USB coreRafael J. Wysocki1-10/+9
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-11usb: core: allow a reference device for new_idWolfram Sang1-2/+8
Often, usb drivers need some driver_info to get a device to work. To have access to driver_info when using new_id, allow to pass a reference vendor:product tuple from which new_id will inherit driver_info. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Documentation sysfs-bus-usb: Move files with known users to stableHans de Goede1-127/+0
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14Documentation sysfs-bus-usb: Document all files used by libusbHans de Goede1-0/+38
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12Documentation sysfs-bus-usb: Correct use of devnumHans de Goede1-1/+1
Correct use of devnum in supports_autosuspend documentation, the sysfs path contains busnum-port.port.port not busnum-devnum (which is the usb bus device address). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06usb: add usb2 Link PM variables to sysfs and usb_deviceMathias Nyman1-0/+27
Adds abitilty to tune L1 timeout (inactivity timer for usb2 link sleep) and BESL (best effort service latency)via sysfs. This also adds a new usb2_lpm_parameters structure with those variables to struct usb_device. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-03-29USB: remove CONFIG_USB_SUSPEND from DocumentationAlan Stern1-3/+3
An earlier patch removed the CONFIG_USB_SUSPEND symbol but forgot to update the Documentation files. This patch (as1676) rectifies that omission. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21usb: Add "portX/connect_type" attribute to expose usb port's connect typeLan Tianyu1-0/+9
Some platforms provide usb port connect types through ACPI. This patch is to add this new attribute to expose these information to user space. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-25Revert "usb : Add sysfs files to control port power."Greg Kroah-Hartman1-24/+0
This reverts commit ca9c9d0c922e4f1dac80699ebab1269d6dbaff85. Rafael wants more time to work on the user api to handle port power issues, so let's just revert the sysfs changes for now. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Lan Tianyu <tianyu.lan@intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-11usb : Add sysfs files to control port power.Lan Tianyu1-0/+24
This patch adds two sysfs files for each usb hub port to allow userspace to control the port power policy. For an upcoming Intel xHCI roothub, this will translate into ACPI calls to completely power off or power on the port. As a reminder, when these ports are completely powered off, the USB host and device will see a physical disconnect. All future USB device connections will be lost, and the device will not be able to signal a remote wakeup. The control sysfs file can be written to with two options: "on" - port power must be on. "off" - port must be off. The state sysfs file reports usb port's power state: "on" - powered on "off" - powered off "error" - can't get power state For now, let userspace dictate the port power off policy. Future patches may add an in-kernel policy. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10usb: make usb port a real deviceLan Tianyu1-0/+7
This patch turns each USB port on a hub into a new struct device. This new device has the USB hub interface device as its parent. The port devices are stored in a new structure (usb_port), and an array of usb_ports are dynamically allocated once we know how many ports the USB hub has. Move the port_owner variable out of usb_hub and into this new structure. A new file will be created in the hub interface sysfs directory, so add documentation. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11USB: Add a sysfs file to show LTM capabilities.Sarah Sharp1-0/+12
USB 3.0 devices can optionally support Latency Tolerance Messaging (LTM). Add a new sysfs file in the device directory to show whether a device is LTM capable. This file will be present for both USB 2.0 and USB 3.0 devices. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-05-23Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-14USB: let both new_id and remove_id show dynamic id listBjørn Mork1-0/+15
This enables the current list of dynamic IDs to be read out through either new_id or remove_id. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-16Documentation: Fix typo in multiple files in DocumentationMasanari Iida1-2/+2
Correct multiple spelling typo in Documentation. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Rob Landley <rob@landley.net> Reported-by: Anders Larsen <al@alarsen.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-09usb: Add support for indicating whether a port is removableMatthew Garrett1-0/+11
Userspace may want to make policy decisions based on whether or not a given USB device is removable. Add a per-device member and support for exposing it in sysfs. Information sources to populate it will be added later. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-11-15USB: Add optional match for interface class to dynamic ID facilityJosua Dietze1-0/+25
When adding the ID of a composite device dynamically to a driver, all hitherto unbound interfaces are bound to this driver regardless of their class, which may not be intended. The patch adds the option to tell the targeted interface class to a driver via the "new_id" attribute, in addition to the device ID. Also, it appends the ABI documentation accordingly. Example: $ echo "1234 2a2a ff" >/sys/bus/usb-serial/drivers/option1/new_id will bind only vendor-specific interfaces to the 3G driver. Signed-off-by: Josua Dietze <digidietze@draisberghof.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-27usbcore: add sysfs support to xHCI usb2 hardware LPMAndiry Xu1-0/+15
This patch adds sysfs support to xHCI usb2 hardware LPM, so developer can enable and disable usb2 hardware LPM manually for test purpose. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21USB: deprecate the power/level sysfs attributeAlan Stern1-28/+0
This patch (as1367) deprecates USB's power/level sysfs attribute in favor of the power/control attribute provided by the runtime PM core. The two attributes do the same thing. It would be nice to replace power/level with a symlink to power/control, but at the moment sysfs doesn't offer any way to do so. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: Fix documentation for avoid_reset_quirkOliver Neukum1-1/+1
The name used in the documentation doesn't match reality. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03USB: Export QUIRK_RESET_MORPHS through sysfsOliver Neukum1-0/+11
Some devices which use mode switching revert to their primary mode as they are reset. They must not be reset for error handling. As user spaces makes the switch it also has to tell the kernel that a device is quirky. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: power management documentation updateAlan Stern1-8/+10
This patch (as1313) updates the documentation concerning USB power management. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB: add remove_id sysfs attr for usb driversCHENG Renquan1-0/+13
Accroding commit 0994375e, which is adding remove_id sysfs attr for pci drivers, for management tools dynamically bind/unbind a pci/usb devices to a specified drivers; with this patch, the management tools can be simplied. And the original code didn't handle the failure of usb_create_newid_file, fixed in this patch. Signed-off-by: CHENG Renquan <rqcheng@smu.edu.sg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-20Merge branch 'master' into for-upstreamDavid Vrabel1-0/+16
Conflicts: Documentation/ABI/testing/sysfs-bus-usb drivers/Makefile
2008-10-18USB: Export if an interface driver supports autosuspend.Sarah Sharp1-0/+16
Create a new sysfs file per interface named supports_autosuspend. This file returns true if an interface driver's .supports_autosuspend flag is set. It also returns true if the interface is unclaimed (since the USB core will autosuspend a device if an interface is not claimed). This new sysfs file will be useful for user space scripts to test whether a USB device correctly auto-suspends. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-17uwb: document UWB and WUSB sysfs filesDavid Vrabel1-0/+43
Add some brief documentation on the UWB and WUSB related sysfs files. Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-02-02USB: Add documentation for USB suspend statistics.Sarah Sharp1-0/+33
This documents two newly created files: /sys/bus/usb/device/.../power/connected_duration /sys/bus/usb/device/.../power/active_duration Documentation was placed in Documentation/ABI/testing, since that's where the documentation is for the other USB sysfs power files. Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-13USB: add power/persist device attributeAlan Stern1-0/+13
This patch (as920) adds an extra level of protection to the USB-Persist facility. Now it will apply by default only to hubs; for all other devices the user must enable it explicitly by setting the power/persist device attribute. The disconnect_all_children() routine in hub.c has been removed and its code placed inline. This is the way it was originally as part of hub_pre_reset(); the revised usage in hub_reset_resume() is sufficiently different that the code can no longer be shared. Likewise, mark_children_for_reset() is now inline as part of hub_reset_resume(). The end result looks much cleaner than before. The sysfs interface is updated to add the new attribute file, and there are corresponding documentation updates. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-28USB: add power/level sysfs attributeAlan Stern1-0/+26
This patch (as874) adds another piece to the user-visible part of the USB autosuspend interface. The new power/level sysfs attribute allows users to force the device on (with autosuspend off), force the device to sleep (with autoresume off), or return to normal automatic operation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-28USB: Allow autosuspend delay to equal 0Alan Stern1-0/+15
This patch (as867) adds an entry for the new power/autosuspend attribute in Documentation/ABI/testing, and it changes the behavior of the delay value. Now a delay of 0 means to autosuspend as soon as possible, and negative values will prevent autosuspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-07 00:44:42 +0300