| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-fixes for v7.0-rc7
imx: set dma_slave_config to 0 and avoid uninitialized fields
|
|
The current custom implementation of offsetof() fails UBSAN:
runtime error: member access within null pointer of type 'struct ...'
This means that all its users, including container_of(), free() and
realloc(), fail.
Use __builtin_offsetof() instead which does not have this issue and
has been available since GCC 4 and clang 3.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260401-nolibc-asprintf-v1-1-46292313439f@weissschuh.net
|
|
Remove redundant parentheses around the '&' operator to comply with
kernel style guidelines, as reported by checkpatch:
CHECK: Unnecessary parentheses around adapter->securitypriv
Signed-off-by: Sam Daly <sam@samdaly.ie>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260403172839.367663-1-sam@samdaly.ie
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In previous patch "Documentation: clarify the mandatory and desirable
info for security reports" I left two typos that I didn't detect in local
checks. One is "get_maintainers.pl" (no 's' in the script name), and the
other one is a missing closing quote after "Reported-by", which didn't
have effect here but I don't know if it can break rendering elsewhere
(e.g. on the public HTML page). Better fix it before it gets merged.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404082033.5160-1-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fstatat() contains two open-coded copies of makedev() to handle minor
numbers >= 256. Now that the regular makedev() handles both large minor
and major numbers correctly use the common function.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-6-456a429bf60c@weissschuh.net
|
|
Remove the limitation of only handling small major and minor numbers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-5-456a429bf60c@weissschuh.net
|
|
statx() returns both 32-bit minor and major numbers. For both of them to
fit into the 'dev_t' in 'struct stat', that needs to be 64 bits wide.
The other uses of 'dev_t' in nolibc are makedev() and friends and
mknod(). makedev() and friends are going to be adapted in an upcoming
commit and mknod() will silently truncate 'dev_t' to 'unsigned int' in
the kernel, similar to other libcs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-4-456a429bf60c@weissschuh.net
|
|
Functions make it easier to keep the input and output types straight and
avoid duplicate evaluations of their arguments.
Also these functions will become a bit more complex to handle full
64-bit 'dev_t' which is easier to read in a function.
Still stay compatible with code which expects these to be macros.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-3-456a429bf60c@weissschuh.net
|
|
The handling of 'dev_t' values is about to be changed.
Add a test to make sure they are returned correctly from stat().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-2-456a429bf60c@weissschuh.net
|
|
These functions/macros are about to be changed.
Add some tests to make sure they continue working.
As they only handle small dev_t values, only test those for now.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-1-456a429bf60c@weissschuh.net
|
|
Reuse KVM_CAP_VM_GPA_BITS to advertise and select the effective
G-stage GPA width for a VM.
KVM_CHECK_EXTENSION(KVM_CAP_VM_GPA_BITS) returns the effective GPA
bits for a VM, KVM_ENABLE_CAP(KVM_CAP_VM_GPA_BITS) allows userspace
to downsize the effective GPA width by selecting a smaller G-stage
page table format:
- gpa_bits <= 41 selects Sv39x4 (pgd_levels=3)
- gpa_bits <= 50 selects Sv48x4 (pgd_levels=4)
- gpa_bits <= 59 selects Sv57x4 (pgd_levels=5)
Reject the request with -EINVAL for unsupported values and with -EBUSY
if vCPUs have been created or any memslot is populated.
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260403153019.9916-4-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Gstage page-table helpers frequently chase gstage->kvm->arch to
fetch pgd_levels. This adds noise and repeats the same dereference
chain in hot paths.
Add pgd_levels to struct kvm_gstage and initialize it from kvm->arch
when setting up a gstage instance. Introduce kvm_riscv_gstage_init()
to centralize initialization and switch gstage code to use
gstage->pgd_levels.
Suggested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/20260403153019.9916-3-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
If shrink_dcache_tree() runs into a potential victim that is already
dying, it must wait for that dentry to go away. To avoid busy-waiting
we need some object to wait on and a way for dentry_unlist() to see that
we need to be notified.
The obvious place for the object to wait on would be on our stack frame.
We will store a pointer to that object (struct completion_list) in victim
dentry; if there's more than one thread wanting to wait for the same
dentry to finish dying, we'll have their instances linked into a list,
with reference in dentry pointing to the head of that list.
* new object - struct completion_list. A pair of struct completion and
pointer to the next instance. That's what shrink_dcache_tree() will wait
on if needed.
* add a new member (->waiters, opaque pointer to struct completion_list)
to struct dentry. It is defined for negative live dentries that are
not in-lookup ones and it will remain NULL for almost all of them.
It does not conflict with ->d_rcu (defined for killed dentries), ->d_alias
(defined for positive dentries, all live) or ->d_in_lookup_hash (defined
for in-lookup dentries, all live negative). That allows to colocate
all four members.
* make sure that all places where dentry enters the state where ->waiters
is defined (live, negative, not-in-lookup) initialize ->waiters to NULL.
* if select_collect2() runs into a dentry that is already dying, have
its caller insert a local instance of struct completion_list into the
head of the list hanging off dentry->waiters and wait for completion.
* if dentry_unlist() sees non-NULL ->waiters, have it carefully walk
through the completion_list instances in that list, calling complete()
for each.
For now struct completion_list is local to fs/dcache.c; it's obviously
dentry-agnostic, and it can be trivially lifted into linux/completion.h
if somebody finds a reason to do so...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Introduces one per-VM architecture-specific fields to support runtime
configuration of the G-stage page table format:
- kvm->arch.pgd_levels: the corresponding number of page table levels
for the selected mode.
These fields replace the previous global variables
kvm_riscv_gstage_mode and kvm_riscv_gstage_pgd_levels, enabling different
virtual machines to independently select their G-stage page table format
instead of being forced to share the maximum mode detected by the kernel
at boot time.
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/20260403153019.9916-2-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
BETOP's BTP-KP50B and BTP-KP50C controller's wireless dongles are both
working as standard Xbox 360 controllers. Add USB device IDs for them to
xpad driver.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Link: https://patch.msgid.link/TY4PR01MB14432B4B298EA186E5F86C46B9855A@TY4PR01MB14432.jpnprd01.prod.outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add device IDs for the Razer Wolverine V3 Pro controller in both
wired (0x0a57) and wireless 2.4 GHz dongle (0x0a59) modes.
The controller uses the Xbox 360 protocol (vendor-specific class,
subclass 93, protocol 1) on interface 0 with an identical 20-byte
input report layout, so no additional processing is needed.
Signed-off-by: Zoltan Illes <zoliviragh@gmail.com>
Link: https://patch.msgid.link/20260329220031.1325509-1-137647604+ZlordHUN@users.noreply.github.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add vendor ID for RedOctane Games to xpad driver.
Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com>
Link: https://patch.msgid.link/20260311213106.271577-2-sanjay.govind9@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
All items in the TODO block have since been addressed: axis tuning,
analog button handling, rumble support, and dance pad USB IDs are all
implemented. The manual changelog is also removed as history is tracked
in git.
Signed-off-by: Elliot Tester <elliotctester1@gmail.com>
Link: https://patch.msgid.link/20260325221618.135833-1-elliotctester1@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Prevent infinite fault loops when guests access memory regions without
proper permissions. Currently, mshv_handle_gpa_intercept() attempts to
remap pages for all faults on movable memory regions, regardless of
whether the access type is permitted. When a guest writes to a read-only
region, the remap succeeds but the region remains read-only, causing
immediate re-fault and spinning the vCPU indefinitely.
Validate intercept access type against region permissions before
attempting remaps. Reject writes to non-writable regions and executes to
non-executable regions early, returning false to let the VMM handle the
intercept appropriately.
This also closes a potential DoS vector where malicious guests could
intentionally trigger these fault loops to consume host resources.
Fixes: b9a66cd5ccbb ("mshv: Add support for movable memory regions")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
If hv_pci_probe() fails after storing the domain number in
hbus->bridge->domain_nr, there is a call to free this domain_nr via
pci_bus_release_emul_domain_nr(), however, during cleanup, the bridge
release callback pci_release_host_bridge_dev() also frees the domain_nr
causing ida_free to be called on same ID twice and triggering following
warning:
ida_free called for id=28971 which is not allocated.
WARNING: lib/idr.c:594 at ida_free+0xdf/0x160, CPU#0: kworker/0:2/198
Call Trace:
pci_bus_release_emul_domain_nr+0x17/0x20
pci_release_host_bridge_dev+0x4b/0x60
device_release+0x3b/0xa0
kobject_put+0x8e/0x220
devm_pci_alloc_host_bridge_release+0xe/0x20
devres_release_all+0x9a/0xd0
device_unbind_cleanup+0x12/0xa0
really_probe+0x1c5/0x3f0
vmbus_add_channel_work+0x135/0x1a0
Fix this by letting pci core handle the free domain_nr and remove
the explicit free called in pci-hyperv driver.
Fixes: bcce8c74f1ce ("PCI: Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms")
Signed-off-by: Sahil Chandna <sahilchandna@linux.microsoft.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- fix iommu incorrectly bypassing DMA APIs
Thanks to Dan Horak, Gaurav Batra, and Ritesh Harjani (IBM).
* tag 'powerpc-7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv/iommu: iommu incorrectly bypass DMA APIs
|
|
Format the Rust prelude to use the "kernel vertical" imports style [1].
No functional changes intended.
Link: https://docs.kernel.org/rust/coding-guidelines.html#imports [1]
Link: https://patch.msgid.link/20260208224659.18406-2-ojeda@kernel.org
[ Rebased. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix a memory leak in the zcrypt driver where the AP message buffer
for clear key RSA requests was allocated twice, once by the caller
and again locally, causing the first allocation to never be freed
- Fix the cpum_sf perf sampling rate overflow adjustment to clamp the
recalculated rate to the hardware maximum, preventing exceptions on
heavily loaded systems running with HZ=1000
* tag 's390-7.0-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix memory leak with CCA cards used as accelerator
s390/cpum_sf: Cap sampling rate to prevent lsctl exception
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix temperature sensor for PRIME X670E-PRO WIFI
- occ: Add missing newline, and fix potential division by zero
- pmbus:
- Fix device ID comparison and printing in tps53676_identify()
- Add missing MODULE_IMPORT_NS("PMBUS") for ltc4286
- Check return value of page-select write in pxe1610 probe
- Fix array access with zero-length block tps53679 read
* tag 'hwmon-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) Fix T_Sensor for PRIME X670E-PRO WIFI
hwmon: (occ) Fix missing newline in occ_show_extended()
hwmon: (occ) Fix division by zero in occ_show_power_1()
hwmon: (tps53679) Fix device ID comparison and printing in tps53676_identify()
hwmon: (ltc4286) Add missing MODULE_IMPORT_NS("PMBUS")
hwmon: (pxe1610) Check return value of page-select write in probe
hwmon: (tps53679) Fix array access with zero-length block read
|
|
It should now be rare to trigger this warning - it doesn't need to be so
verbose. Make it follow the usual style in the module loading code.
For the same reason, drop the dump_stack().
Suggested-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Lucas De Marchi <demarchi@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
The -EEXIST errno is reserved by the module loading functionality. When
userspace calls [f]init_module(), it expects a -EEXIST to mean that the
module is already loaded in the kernel. If module_init() returns it,
that is not true anymore.
Override the error when returning to userspace: it doesn't make sense to
change potentially long error propagation call chains just because it's
will end up as the return of module_init().
Closes: https://lore.kernel.org/all/aKLzsAX14ybEjHfJ@orbyte.nwl.cc/
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Lucas De Marchi <demarchi@kernel.org>
[Sami: Fixed a typo.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
Ivan Vecera says:
====================
dpll: add frequency monitoring feature
This series adds support for monitoring the measured input frequency
of DPLL input pins via the DPLL netlink interface.
Some DPLL devices can measure the actual frequency being received on
input pins. The approach mirrors the existing phase-offset-monitor
feature: a device-level attribute (DPLL_A_FREQUENCY_MONITOR) enables
or disables monitoring, and a per-pin attribute
(DPLL_A_PIN_MEASURED_FREQUENCY) exposes the measured frequency in
millihertz (mHz) when monitoring is enabled.
Patch 1 adds the new attributes to the DPLL netlink spec (dpll.yaml),
the DPLL_PIN_MEASURED_FREQUENCY_DIVIDER constant, regenerates the
auto-generated UAPI header and netlink policy, and updates
Documentation/driver-api/dpll.rst.
Patch 2 adds the callback operations (freq_monitor_get/set for
devices, measured_freq_get for pins) and the corresponding netlink
GET/SET handlers in the DPLL core. The core only invokes
measured_freq_get when the frequency monitor is enabled on the parent
device. The freq_monitor_get callback is required when measured_freq_get
is provided.
Patch 3 implements the feature in the ZL3073x driver by extracting
a common measurement latch helper from the existing FFO update path,
adding a frequency measurement function, and wiring up the new
callbacks.
====================
Link: https://patch.msgid.link/20260402184057.1890514-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract common measurement latch logic from zl3073x_ref_ffo_update()
into a new zl3073x_ref_freq_meas_latch() helper and add
zl3073x_ref_freq_meas_update() that uses it to latch and read absolute
input reference frequencies in Hz.
Add meas_freq field to struct zl3073x_ref and the corresponding
zl3073x_ref_meas_freq_get() accessor. The measured frequencies are
updated periodically alongside the existing FFO measurements.
Add freq_monitor boolean to struct zl3073x_dpll and implement the
freq_monitor_set/get device callbacks to enable/disable frequency
monitoring via the DPLL netlink interface.
Implement measured_freq_get pin callback for input pins that returns the
measured input frequency in mHz.
Reviewed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260402184057.1890514-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new callback operations for a dpll device:
- freq_monitor_get(..) - to obtain current state of frequency monitor
feature from dpll device,
- freq_monitor_set(..) - to allow feature configuration.
Add new callback operation for a dpll pin:
- measured_freq_get(..) - to obtain the measured frequency in mHz.
Obtain the feature state value using the get callback and provide it to
the user if the device driver implements callbacks. The measured_freq_get
pin callback is only invoked when the frequency monitor is enabled.
The freq_monitor_get device callback is required when measured_freq_get
is provided by the driver.
Execute the set callback upon user requests.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260402184057.1890514-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add DPLL_A_FREQUENCY_MONITOR device attribute to allow control over
the frequency monitor feature. The attribute uses the existing
dpll_feature_state enum (enable/disable) and is present in both
device-get reply and device-set request.
Add DPLL_A_PIN_MEASURED_FREQUENCY pin attribute to expose the measured
input frequency in millihertz (mHz). The attribute is present in the
pin-get reply. Add DPLL_PIN_MEASURED_FREQUENCY_DIVIDER constant to
allow userspace to extract integer and fractional parts.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260402184057.1890514-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test checks both invalid GPAs as well as unmappable GPAs, so drop
'invalid' from its name.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-10-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The test currently allegedly makes sure that VMRUN causes a #GP in
vmcb12 GPA is valid but unmappable. However, it calls run_guest() with
an the test vmcb12 GPA, and the #GP is produced from VMLOAD, not VMRUN.
Additionally, the underlying logic just changed to match architectural
behavior, and all of VMRUN/VMLOAD/VMSAVE fail emulation if vmcb12 cannot
be mapped. The CPU still injects a #GP if the vmcb12 GPA exceeds
maxphyaddr.
Rework the test such to use the KVM_ONE_VCPU_TEST[_SUITE] harness, and
test all of VMRUN/VMLOAD/VMSAVE with both an invalid GPA (-1ULL) causing
a #GP, and a valid but unmappable GPA causing emulation failure. Execute
the instructions directly from L1 instead of run_guest() to make sure
the #GP or emulation failure is produced by the right instruction.
Leave the #VMEXIT with unmappable GPA test case as-is, but wrap it with
a test harness as well.
Opportunisitically drop gp_triggered, as the test already checks that
a #GP was injected through a SYNC. Also, use the first unmapped GPA
instead of the maximum legal GPA, as some CPUs inject a #GP for the
maximum legal GPA (likely in a reserved area).
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-9-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM currently injects a #GP if mapping vmcb12 fails when emulating
VMRUN/VMLOAD/VMSAVE. This is not architectural behavior, as #GP should
only be injected if the physical address is not supported or not
aligned. Instead, handle it as an emulation failure, similar to how nVMX
handles failures to read/write guest memory in several emulation paths.
When virtual VMLOAD/VMSAVE is enabled, if vmcb12's GPA is not mapped in
the NPTs a VMEXIT(#NPF) will be generated, and KVM will install an MMIO
SPTE and emulate the instruction if there is no corresponding memslot.
x86_emulate_insn() will return EMULATION_FAILED as VMLOAD/VMSAVE are not
handled as part of the twobyte_insn cases.
Even though this will also result in an emulation failure, it will only
result in a straight return to userspace if
KVM_CAP_EXIT_ON_EMULATION_FAILURE is set. Otherwise, it would inject #UD
and only exit to userspace if not in guest mode. So the behavior is
slightly different if virtual VMLOAD/VMSAVE is enabled.
Fixes: 3d6368ef580a ("KVM: SVM: Add VMRUN handler")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-8-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Currently, a #GP is only injected if kvm_vcpu_map() fails with -EINVAL.
But it could also fail with -EFAULT if creating a host mapping failed.
Inject a #GP in all cases, no reason to treat failure modes differently.
Similar to commit 01ddcdc55e09 ("KVM: nSVM: Always inject a #GP if
mapping VMCB12 fails on nested VMRUN"), treat all failures equally.
Fixes: 8c5fbf1a7231 ("KVM/nSVM: Use the new mapping API for mapping guest memory")
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-7-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When KVM intercepts #GP on an SVM instruction from L2, it checks the
legality of RAX, and injects a #GP if RAX is illegal, or otherwise
synthesizes a #VMEXIT to L1. However, checking EFER.SVME and CPL takes
precedence over both the RAX check and the intercept. Call
nested_svm_check_permissions() first to cover both.
Note that if #GP is intercepted on SVM instruction in L1, the intercept
handlers of VMRUN/VMLOAD/VMSAVE already perform these checks.
Note #2, if KVM does not intercept #GP, the check for EFER.SVME is not
done in the correct order, because KVM handles it by intercepting the
instructions when EFER.SVME=0 and injecting #UD. However, a #GP
injected by hardware would happen before the instruction intercept,
leading to #GP taking precedence over #UD from the guest's perspective.
Opportunistically add a FIXME for this.
Fixes: 82a11e9c6fa2 ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions")
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-6-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When #GP is intercepted by KVM, the #GP interception handler checks
whether the GPA in RAX is legal and reinjects the #GP accordingly.
Otherwise, it calls into the appropriate interception handler for
VMRUN/VMLOAD/VMSAVE. The intercept handlers do not check RAX.
However, the intercept handlers need to do the RAX check, because if the
guest has a smaller MAXPHYADDR, RAX could be legal from the hardware
perspective (i.e. CPU does not inject #GP), but not from the vCPU's
perspective. Note that with allow_smaller_maxphyaddr, both NPT and VLS
cannot be used, so VMLOAD/VMSAVE have to be intercepted, and RAX can
always be checked against the vCPU's MAXPHYADDR.
Move the check into the interception handlers for VMRUN/VMLOAD/VMSAVE as
the CPU does not check RAX before the interception. Read RAX using
kvm_register_read() to avoid a false negative on page_address_valid() on
32-bit due to garbage in the higher bits.
Keep the check in the #GP intercept handler in the nested case where
a #VMEXIT is synthesized into L1, as the RAX check is still needed there
and takes precedence over the intercept.
Opportunistically add a FIXME about the #VMEXIT being synthesized into
L1, as it needs to be conditional.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-5-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When KVM intercepts #GP on an SVM instruction, it re-injects the #GP if
the instruction was executed with a mis-algined RAX. However, a #GP
should also be reinjected if RAX contains an illegal GPA, according to
the APM, one of #GP conditions is:
rAX referenced a physical address above the maximum
supported physical address.
Replace the PAGE_MASK check with page_address_valid(), which checks both
page-alignment as well as the legality of the GPA based on the vCPU's
MAXPHYADDR. Use kvm_register_read() to read RAX to so that bits 63:32 are
dropped when the vCPU is in 32-bit mode, i.e. to avoid a false positive
when checking the validity of the address.
Note that this is currently only a problem if KVM is running an L2 guest
and ends up synthesizing a #VMEXIT to L1, as the RAX check takes
precedence over the intercept. Otherwise, if KVM emulates the
instruction, kvm_vcpu_map() should fail on illegal GPAs and inject a #GP
anyway. However, following patches will change the failure behavior of
kvm_vcpu_map(), so make sure the #GP interception handler does this
appropriately.
Opportunistically drop a teaser FIXME about the SVM instructions
handling on #GP belonging in the emulator.
Fixes: 82a11e9c6fa2 ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions")
Fixes: d1cba6c92237 ("KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-4-yosry@kernel.org
[sean: massage wording with respect to kvm_register_read()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Instead of returning an opcode from svm_instr_opcode() and then passing
it to emulate_svm_instr(), which uses it to find the corresponding exit
code and intercept handler, return the exit code directly from
svm_instr_opcode(), and rename it to svm_get_decoded_instr_exit_code().
emulate_svm_instr() boils down to synthesizing a #VMEXIT or calling the
intercept handler, so open-code it in gp_interception(), and use
svm_invoke_exit_handler() to call the intercept handler based on
the exit code. This allows for dropping the SVM_INSTR_* enum, and the
const array mapping its values to exit codes and intercept handlers.
In gp_intercept(), handle SVM instructions and first with an early return,
and invert is_guest_mode() checks, un-indenting the rest of the code.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-3-yosry@kernel.org
[sean: add BUILD_BUG_ON(), tweak formatting/naming]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Architecturally, VMRUN/VMLOAD/VMSAVE should generate a #GP if the
physical address in RAX is not supported. check_svme_pa() hardcodes this
to checking that bits 63-48 are not set. This is incorrect on HW
supporting 52 bits of physical address space. Additionally, the emulator
does not check if the address is not aligned, which should also result
in #GP.
Use page_address_valid() which properly checks alignment and the address
legality based on the guest's MAXPHYADDR. Plumb it through
x86_emulate_ops, similar to is_canonical_addr(), to avoid directly
accessing the vCPU object in emulator code.
Fixes: 01de8b09e606 ("KVM: SVM: Add intercept checks for SVM instructions")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-2-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The current driver does not follow the latest datasheet and does not
suspend the flow when stopping DMA and resume it when starting. Update
the driver to do so.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Niklas: Rebase from BSP and reword commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20260401183608.1852225-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jon Hunter says:
====================
net: stmmac: Fix Tegra234 MGBE clock
The name of the PTP ref clock for the Tegra234 MGBE ethernet controller
does not match the generic name in the stmmac platform driver. Despite
this basic ethernet is functional on the Tegra234 platforms that use
this driver and as far as I know, we have not tested PTP support with
this driver. Hence, the risk of breaking any functionality is low.
The previous attempt to fix this in the stmmac platform driver, by
supporting the Tegra234 PTP clock name, was rejected [0]. The preference
from the netdev maintainers is to fix this in the DT binding for
Tegra234.
This series fixes this by correcting the device-tree binding to align
with the generic name for the PTP clock. I understand that this is
breaking the ABI for this device, which we should never do, but this
is a last resort for getting this fixed. I am open to any better ideas
to fix this. Please note that we still maintain backward compatibility
in the driver to allow older device-trees to work, but we don't
advertise this via the binding, because I did not see any value in doing
so.
====================
Link: https://patch.msgid.link/20260401102941.17466-1-jonathanh@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP clock for the Tegra234 MGBE device is incorrectly named
'ptp-ref' and should be 'ptp_ref'. This is causing the following
warning to be observed on Tegra234 platforms that use this device:
ERR KERN tegra-mgbe 6800000.ethernet eth0: Invalid PTP clock rate
WARNING KERN tegra-mgbe 6800000.ethernet eth0: PTP init failed
Although this constitutes an ABI breakage in the binding for this
device, PTP support has clearly never worked and so fix this now
so we can correct the device-tree for this device. Note that the
MGBE driver still supports the legacy 'ptp-ref' clock name and so
older/existing device-trees will still work, but given that this
is not the correct name, there is no point to advertise this in the
binding.
Fixes: 189c2e5c7669 ("dt-bindings: net: Add Tegra234 MGBE")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260401102941.17466-3-jonathanh@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 030ce919e114 ("net: stmmac: make sure that ptp_rate is not
0 before configuring timestamping") was added the following error is
observed on Tegra234:
ERR KERN tegra-mgbe 6800000.ethernet eth0: Invalid PTP clock rate
WARNING KERN tegra-mgbe 6800000.ethernet eth0: PTP init failed
It turns out that the Tegra234 device-tree binding defines the PTP ref
clock name as 'ptp-ref' and not 'ptp_ref' and the above commit now
exposes this and that the PTP clock is not configured correctly.
In order to update device-tree to use the correct 'ptp_ref' name, update
the Tegra MGBE driver to use 'ptp_ref' by default and fallback to using
'ptp-ref' if this clock name is present.
Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260401102941.17466-2-jonathanh@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
s3fwrn82_uart_read() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already
deliver a complete frame before allocating a fresh receive buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted.
Fixes: 3f52c2cb7e3a ("nfc: s3fwrn5: Support a UART interface")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260402042148.65236-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AMD defines Extended Interrupt Local Vector Table (EILVT) registers to allow
for additional interrupt sources. While the APIC registers for those are
unique to AMD, the format of those registers follows the standard LVT
registers. Drop EILVT-specific macros in favor of the standard APIC
LVT macros.
Drop unused APIC_EILVT_NR_AMD_K8 and APIC_EILVT_LVTOFF while at it.
No functional change.
[ bp: Merge the two cleanup patches into one. ]
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Manali Shukla <manali.shukla@amd.com>
Link: https://patch.msgid.link/b98d69037c0102d2ccd082a941888a689cd214c9.1775019269.git.naveen@kernel.org
|
|
MAINTAINERS: Update address for Dan Williams
|
|
Update MAINTAINERS and .mailmap to point to my kernel.org address:
djbw@kernel.org.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260403214846.1062341-1-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In configurations with multiple tunnel layers and MPLS lwtunnel routing, a
single tunnel hop can increment the counter beyond this limit. This causes
packets to be dropped with the "Dead loop on virtual device" message even
when a routing loop doesn't exist.
Increase IP_TUNNEL_RECURSION_LIMIT from 4 to 5 to handle this use-case.
Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions")
Link: https://lore.kernel.org/netdev/88deb91b-ef1b-403c-8eeb-0f971f27e34f@redhat.com/
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260402222401.3408368-1-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kevin Hao says:
====================
net: macb: Remove dedicated IRQ handler for WoL
During debugging of a suspend/resume issue, I observed that the macb driver
employs a dedicated IRQ handler for Wake-on-LAN (WoL) support. To my knowledge,
no other Ethernet driver adopts this approach. This implementation unnecessarily
complicates the suspend/resume process without providing any clear benefit.
Instead, we can easily modify the existing IRQ handler to manage WoL events,
avoiding any overhead in the TX/RX hot path.
The net throughput shows no significant difference following these changes.
The following data(net throughput and execution time of macb_interrupt) were
collected from my AMD Zynqmp board using the commands:
taskset -c 1,2,3 iperf3 -c 192.168.3.4 -t 60 -Z -P 3 -R
cat /sys/kernel/debug/tracing/trace_stat/function0
Before:
-------
[SUM] 0.00-60.00 sec 5.99 GBytes 858 Mbits/sec 0 sender
[SUM] 0.00-60.00 sec 5.99 GBytes 857 Mbits/sec receiver
Function Hit Time Avg s^2
-------- --- ---- --- ---
macb_interrupt 217996 678425.2 us 3.112 us 1.446 us
After:
------
[SUM] 0.00-60.00 sec 6.00 GBytes 858 Mbits/sec 0 sender
[SUM] 0.00-60.00 sec 5.99 GBytes 857 Mbits/sec receiver
Function Hit Time Avg s^2
-------- --- ---- --- ---
macb_interrupt 218212 668107.3 us 3.061 us 1.413 us
====================
Link: https://patch.msgid.link/20260402-macb-irq-v2-0-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current implementation, the suspend/resume path frees the
existing IRQ handler and sets up a dedicated WoL IRQ handler, then
restores the original handler upon resume. This approach is not used
by any other Ethernet driver and unnecessarily complicates the
suspend/resume process. After adjusting the IRQ handler in the previous
patches, we can now handle WoL interrupts without introducing any
overhead in the TX/RX hot path. Therefore, the dedicated WoL IRQ
handler is removed.
I have verified WoL functionality on my AMD ZynqMP board using the
following steps:
root@amd-zynqmp:~# ifconfig end0 192.168.3.3
root@amd-zynqmp:~# ethtool -s end0 wol a
root@amd-zynqmp:~# echo mem >/sys/power/state
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-4-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
