| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* kvm-arm64/misc-7.1:
KVM: arm64: selftests: Avoid testing the IMPDEF behavior
KVM: arm64: Destroy stage-2 page-table in kvm_arch_destroy_vm()
KVM: arm64: Don't leave mmu->pgt dangling on kvm_init_stage2_mmu() error
KVM: arm64: Prevent the host from using an smc with imm16 != 0
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/vgic-fixes-7.1:
: .
: FIrst pass at fixing a number of vgic-v5 bugs that were found
: after the merge of the initial series.
: .
KVM: arm64: Advertise ID_AA64PFR2_EL1.GCIE
KVM: arm64: vgic-v5: Fold PPI state for all exposed PPIs
KVM: arm64: set_id_regs: Allow GICv3 support to be set at runtime
KVM: arm64: Don't advertises GICv3 in ID_PFR1_EL1 if AArch32 isn't supported
KVM: arm64: Correctly plumb ID_AA64PFR2_EL1 into pkvm idreg handling
KVM: arm64: Move GICv5 timer PPI validation into timer_irqs_are_valid()
KVM: arm64: Remove evaluation of timer state in kvm_cpu_has_pending_timer()
KVM: arm64: Kill arch_timer_context::direct field
KVM: arm64: vgic-v5: Correctly set dist->ready once initialised
KVM: arm64: vgic-v5: Make the effective priority mask a strict limit
KVM: arm64: vgic-v5: Cast vgic_apr to u32 to avoid undefined behaviours
KVM: arm64: vgic-v5: Transfer edge pending state to ICH_PPI_PENDRx_EL2
KVM: arm64: vgic-v5: Hold config_lock while finalizing GICv5 PPIs
KVM: arm64: Account for RESx bits in __compute_fgt()
KVM: arm64: Fix writeable mask for ID_AA64PFR2_EL1
arm64: Fix field references for ICH_PPI_DVIR[01]_EL2
KVM: arm64: Don't skip per-vcpu NV initialisation
KVM: arm64: vgic: Don't reset cpuif/redist addresses at finalize time
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-protected-guest: (41 commits)
: .
: pKVM support for protected guests, implementing the very long
: awaited support for anonymous memory, as the elusive guestmem
: has failed to deliver on its promises despite a multi-year
: effort. Patches courtesy of Will Deacon. From the initial cover
: letter:
:
: "[...] this patch series implements support for protected guest
: memory with pKVM, where pages are unmapped from the host as they are
: faulted into the guest and can be shared back from the guest using pKVM
: hypercalls. Protected guests are created using a new machine type
: identifier and can be booted to a shell using the kvmtool patches
: available at [2], which finally means that we are able to test the pVM
: logic in pKVM. Since this is an incremental step towards full isolation
: from the host (for example, the CPU register state and DMA accesses are
: not yet isolated), creating a pVM requires a developer Kconfig option to
: be enabled in addition to booting with 'kvm-arm.mode=protected' and
: results in a kernel taint."
: .
KVM: arm64: Don't hold 'vm_table_lock' across guest page reclaim
KVM: arm64: Allow get_pkvm_hyp_vm() to take a reference to a dying VM
KVM: arm64: Prevent teardown finalisation of referenced 'hyp_vm'
drivers/virt: pkvm: Add Kconfig dependency on DMA_RESTRICTED_POOL
KVM: arm64: Rename PKVM_PAGE_STATE_MASK
KVM: arm64: Extend pKVM page ownership selftests to cover guest hvcs
KVM: arm64: Extend pKVM page ownership selftests to cover forced reclaim
KVM: arm64: Register 'selftest_vm' in the VM table
KVM: arm64: Extend pKVM page ownership selftests to cover guest donation
KVM: arm64: Add some initial documentation for pKVM
KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled
KVM: arm64: Implement the MEM_UNSHARE hypercall for protected VMs
KVM: arm64: Implement the MEM_SHARE hypercall for protected VMs
KVM: arm64: Add hvc handler at EL2 for hypercalls from protected VMs
KVM: arm64: Return -EFAULT from VCPU_RUN on access to a poisoned pte
KVM: arm64: Reclaim faulting page from pKVM in spurious fault handler
KVM: arm64: Introduce hypercall to force reclaim of a protected page
KVM: arm64: Annotate guest donations with handle and gfn in host stage-2
KVM: arm64: Change 'pkvm_handle_t' to u16
KVM: arm64: Introduce host_stage2_set_owner_metadata_locked()
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/spe-trbe-nvhe:
: .
: Fix SPE and TRBE nVHE world switch which can otherwise result in
: pretty bad behaviours, as they have the nasty habit of performing
: out of context speculative page table walks.
:
: Patches courtesy of Will Deacon.
: .
KVM: arm64: Don't pass host_debug_state to BRBE world-switch routines
KVM: arm64: Disable SPE Profiling Buffer when running in guest context
KVM: arm64: Disable TRBE Trace Buffer Unit when running in guest context
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/user_mem_abort-rework: (30 commits)
: .
: user_mem_abort() has become an absolute pain to maintain,
: to the point that each single fix is likely to introduce
: *two* new bugs.
:
: Deconstruct the whole thing in logical units, reducing
: the amount of visible and/or mutable state between functions,
: and finally making the code a bit more maintainable.
: .
KVM: arm64: Convert gmem_abort() to struct kvm_s2_fault_desc
KVM: arm64: Simplify integration of adjust_nested_*_perms()
KVM: arm64: Directly expose mapping prot and kill kvm_s2_fault
KVM: arm64: Move device mapping management into kvm_s2_fault_pin_pfn()
KVM: arm64: Replace force_pte with a max_map_size attribute
KVM: arm64: Move kvm_s2_fault.{pfn,page} to kvm_s2_vma_info
KVM: arm64: Restrict the scope of the 'writable' attribute
KVM: arm64: Kill logging_active from kvm_s2_fault
KVM: arm64: Move VMA-related information to kvm_s2_fault_vma_info
KVM: arm64: Kill topup_memcache from kvm_s2_fault
KVM: arm64: Kill exec_fault from kvm_s2_fault
KVM: arm64: Kill write_fault from kvm_s2_fault
KVM: arm64: Constrain fault_granule to kvm_s2_fault_map()
KVM: arm64: Replace fault_is_perm with a helper
KVM: arm64: Move fault context to const structure
KVM: arm64: Make fault_ipa immutable
KVM: arm64: Kill fault->ipa
KVM: arm64: Clean up control flow in kvm_s2_fault_map()
KVM: arm64: Hoist MTE validation check out of MMU lock path
KVM: arm64: Optimize early exit checks in kvm_s2_fault_pin_pfn()
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-psci:
: .
: Cleanup of the pKVM PSCI relay CPU entry code, making it slightly
: easier to follow, should someone have to wade into these waters
: ever again.
: .
KVM: arm64: Remove extra ISBs when using msr_hcr_el2
KVM: arm64: pkvm: Use direct function pointers for cpu_{on,resume}
KVM: arm64: pkvm: Turn __kvm_hyp_init_cpu into an inner label
KVM: arm64: pkvm: Simplify BTI handling on CPU boot
KVM: arm64: pkvm: Move error handling to the end of kvm_hyp_cpu_entry
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-s2-debugfs:
: .
: Expand the stage-2 ptdump infrastructure to be able to display
: the content of the shadow s2 tables generated by nested virt.
:
: Patches courtesy of Wei-Lin Chang.
: .
KVM: arm64: ptdump: Initialize parser_state before pgtable walk
KVM: arm64: nv: Expose shadow page tables in debugfs
KVM: arm64: ptdump: Make KVM ptdump code s2 mmu aware
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/vgic-v5-ppi: (40 commits)
: .
: Add initial GICv5 support for KVM guests, only adding PPI support
: for the time being. Patches courtesy of Sascha Bischoff.
:
: From the cover letter:
:
: "This is v7 of the patch series to add the virtual GICv5 [1] device
: (vgic_v5). Only PPIs are supported by this initial series, and the
: vgic_v5 implementation is restricted to the CPU interface,
: only. Further patch series are to follow in due course, and will add
: support for SPIs, LPIs, the GICv5 IRS, and the GICv5 ITS."
: .
KVM: arm64: selftests: Add no-vgic-v5 selftest
KVM: arm64: selftests: Introduce a minimal GICv5 PPI selftest
KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI
Documentation: KVM: Introduce documentation for VGICv5
KVM: arm64: gic-v5: Probe for GICv5 device
KVM: arm64: gic-v5: Set ICH_VCTLR_EL2.En on boot
KVM: arm64: gic-v5: Introduce kvm_arm_vgic_v5_ops and register them
KVM: arm64: gic-v5: Hide FEAT_GCIE from NV GICv5 guests
KVM: arm64: gic: Hide GICv5 for protected guests
KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
irqchip/gic-v5: Introduce minimal irq_set_type() for PPIs
KVM: arm64: gic-v5: Initialise ID and priority bits when resetting vcpu
KVM: arm64: gic-v5: Create and initialise vgic_v5
KVM: arm64: gic-v5: Support GICv5 interrupts with KVM_IRQ_LINE
KVM: arm64: gic-v5: Implement direct injection of PPIs
KVM: arm64: Introduce set_direct_injection irq_op
KVM: arm64: gic-v5: Trap and mask guest ICC_PPI_ENABLERx_EL1 writes
KVM: arm64: gic-v5: Check for pending PPIs
KVM: arm64: gic-v5: Clear TWI if single task running
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/hyp-tracing: (40 commits)
: .
: EL2 tracing support, adding both 'remote' ring-buffer
: infrastructure and the tracing itself, courtesy of
: Vincent Donnefort. From the cover letter:
:
: "The growing set of features supported by the hypervisor in protected
: mode necessitates debugging and profiling tools. Tracefs is the
: ideal candidate for this task:
:
: * It is simple to use and to script.
:
: * It is supported by various tools, from the trace-cmd CLI to the
: Android web-based perfetto.
:
: * The ring-buffer, where are stored trace events consists of linked
: pages, making it an ideal structure for sharing between kernel and
: hypervisor.
:
: This series first introduces a new generic way of creating remote events and
: remote buffers. Then it adds support to the pKVM hypervisor."
: .
tracing: selftests: Extend hotplug testing for trace remotes
tracing: Non-consuming read for trace remotes with an offline CPU
tracing: Adjust cmd_check_undefined to show unexpected undefined symbols
tracing: Restore accidentally removed SPDX tag
KVM: arm64: avoid unused-variable warning
tracing: Generate undef symbols allowlist for simple_ring_buffer
KVM: arm64: tracing: add ftrace dependency
tracing: add more symbols to whitelist
tracing: Update undefined symbols allow list for simple_ring_buffer
KVM: arm64: Fix out-of-tree build for nVHE/pKVM tracing
tracing: selftests: Add hypervisor trace remote tests
KVM: arm64: Add selftest event support to nVHE/pKVM hyp
KVM: arm64: Add hyp_enter/hyp_exit events to nVHE/pKVM hyp
KVM: arm64: Add event support to the nVHE/pKVM hyp and trace remote
KVM: arm64: Add trace reset to the nVHE/pKVM hyp
KVM: arm64: Sync boot clock with the nVHE/pKVM hyp
KVM: arm64: Add trace remote for the nVHE/pKVM hyp
KVM: arm64: Add tracing capability for the nVHE/pKVM hyp
KVM: arm64: Support unaligned fixmap in the pKVM hyp
KVM: arm64: Initialise hyp_nr_cpus for nVHE hyp
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Replace raw READ_ONCE() dereferences of pgtable entries with corresponding
standard page table accessors pxdp_get() in perf_get_pgtable_size(). These
accessors default to READ_ONCE() on platforms that don't override them. So
there is no functional change on such platforms.
However arm64 platform is being extended to support 128 bit page tables via
a new architecture feature i.e FEAT_D128 in which case READ_ONCE() will not
provide required single copy atomic access for 128 bit page table entries.
Although pxdp_get() accessors can later be overridden on arm64 platform to
extend required single copy atomicity support on 128 bit entries.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260227062744.2215491-1-anshuman.khandual@arm.com
|
|
The commit 5f6bd380c7bdb ("sched/rt: Remove default bandwidth control")
and followup changes made a few of the functions unnecessary, drop them
for simplicity.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260323-sched-rert_groups-v3-3-1e7d5ed6b249@suse.com
|
|
The sched_rt_global_constraints() function is a remnant that used to set
up global RT throttling but that is no more since commit 5f6bd380c7bdb
("sched/rt: Remove default bandwidth control") and the function ended up
only doing schedulability check.
Move the check into the validation function where it fits better.
(The order of validations sched_dl_global_validate() and
sched_rt_global_validate() shouldn't matter.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260323-sched-rert_groups-v3-2-1e7d5ed6b249@suse.com
|
|
The warning from the commit 87f1fb77d87a6 ("sched: Add RT_GROUP WARN
checks for non-root task_groups") is wrong -- it assumes that only
task_groups with rt_rq are traversed, however, the schedulability check
would iterate all task_groups even when rt_group_sched=0 is disabled at
boot time but some non-root task_groups exist.
The schedulability check is supposed to validate:
a) that children don't overcommit its parent,
b) no RT task group overcommits global RT limit.
but with rt_group_sched=0 there is no (non-trivial) hierarchy of RT groups,
therefore skip the validation altogether. Otherwise, writes to the
global sched_rt_runtime_us knob will be rejected with incorrect
validation error.
This fix is immaterial with CONFIG_RT_GROUP_SCHED=n.
Fixes: 87f1fb77d87a6 ("sched: Add RT_GROUP WARN checks for non-root task_groups")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260323-sched-rert_groups-v3-1-1e7d5ed6b249@suse.com
|
|
John noted that commit 115135422562 ("sched/deadline: Fix 'stuck' dl_server")
unfixed the issue from commit a3a70caf7906 ("sched/deadline: Fix dl_server
behaviour").
The issue in commit 115135422562 was for wakeups of the server after the
deadline; in which case you *have* to start a new period. The case for
a3a70caf7906 is wakeups before the deadline.
Now, because the server is effectively running a least-laxity policy, it means
that any wakeup during the runnable phase means dl_entity_overflow() will be
true. This means we need to adjust the runtime to allow it to still run until
the existing deadline expires.
Use the revised wakeup rule for dl_defer entities.
Fixes: 115135422562 ("sched/deadline: Fix 'stuck' dl_server")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260404102244.GB22575@noisy.programming.kicks-ass.net
|
|
It returns the mask of the features which are being currently used,
i.e., NOT in their initial configuration.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Merge updates of Intel thermal drivers for 7.1:
- Replace cpumask_weight() in intel_hfi_offline() with cpumask_empty()
which is generally more efficient (Yury Norov)
- Add support for reading DDR data rate from PCI config space on Nova
Lake platforms to the int340x thermal driver (Srinivas Pandruvada)
* thermal-intel:
thermal: intel: hfi: use cpumask_empty() in intel_hfi_offline()
thermal: intel: int340x: Read DDR data rate for Nova Lake
|
|
To avoid some undesirable interactions between thermal zone suspend
and resume with user space that is running when those operations are
carried out, move them closer to the suspend and resume of devices,
respectively, by updating dpm_prepare() to carry out thermal zone
suspend and dpm_complete() to start thermal zone resume (that will
continue asynchronously).
This also makes the code easier to follow by removing one, arguably
redundant, level of indirection represented by the thermal PM notifier.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/2036875.PYKUYFuaPT@rafael.j.wysocki
|
|
Define thermal_class as a static structure to simplify thermal_init()
and to simplify thermal class availability checks that will need to
be carried out during the suspend and resume of thermal zones after
subsequent changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10831981.nUPlyArG6x@rafael.j.wysocki
|
|
The thermal workqueue doesn't need to be freezable or per-CPU, so drop
WQ_FREEZABLE and WQ_PERCPU from the flags when allocating it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Subject rewrite ]
Link: https://patch.msgid.link/3413335.44csPzL39Z@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since __thermal_zone_device_update() checks if tz->state is
TZ_STATE_READY and bails out immediately otherwise, it is not
necessary to check the thermal_zone_is_present() return value in
thermal_zone_device_update(). Namely, tz->state is equal to
TZ_STATE_FLAG_INIT initially and that flag is only cleared in
thermal_zone_init_complete() after adding tz to the list of thermal
zones, and thermal_zone_exit() sets TZ_STATE_FLAG_EXIT in tz->state
while removing tz from that list. Thus tz->state is not TZ_STATE_READY
when tz is not in the list and the check mentioned above is redundant.
Accordingly, drop the redundant thermal_zone_is_present() check from
thermal_zone_device_update() and drop the former altogether because it
has no more users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3406806.aeNJFYEL58@rafael.j.wysocki
|
|
The thermal zone removal ordering is different from the thermal zone
registration rollback path ordering and the former is arguably
problematic because freeing a thermal zone ID prematurely may cause
it to be used during the registration of another thermal zone which
may fail as a result.
Prevent that from occurring by changing the thermal zone removal
ordering to reflect the thermal zone registration rollback path
ordering.
Also more the ida_destroy() call from thermal_zone_device_unregister()
to thermal_release() for consistency.
Fixes: b31ef8285b19 ("thermal core: convert ID allocation to IDA")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5063934.GXAFRqVoOG@rafael.j.wysocki
|
|
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration.
Fixes: e33df1d2f3a0 ("thermal: let governors have private data for each thermal zone")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5092923.31r3eYUQgx@rafael.j.wysocki
|
|
Add the RPMh power domains required for the Hawi SoC. This includes
new definitions for domains supplying specific hardware components:
- DCX: supplies VDD_DISP
- GBX: supplies VDD_GFX_BX
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the RPMh power domain for Hawi SoC, and add definitions for
the new power domains which present in Hawi SoC:
- RPMHPD_DCX (Display Core X): supplies VDD_DISP for the display
subsystem
- RPMHPD_GBX (Graphics Box): supplies VDD_GFX_BX for the GPU/graphics
subsystem
Also, add constants for new power domain levels that supported in Hawi
SoC, including: LOW_SVS_D3_0, LOW_SVS_D1_0, LOW_SVS_D0_0, SVS_L2_0,
TURBO_L1_0/1/2, TURBO_L1_0/1/2.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Allows the buildbots to build the driver on other platforms. There's
nothing special arch specific thing going on here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some architecture-specific work needs to be performed between the state
management for exception entry/exit and the "real" work to handle the
exception. For example, arm64 needs to manipulate a number of exception
masking bits, with different exceptions requiring different masking.
Generally this can all be hidden in the architecture code, but for arm64
the current structure of irqentry_exit_to_kernel_mode() makes this
particularly difficult to handle in a way that is correct, maintainable,
and efficient.
The gory details are described in the thread surrounding:
https://lore.kernel.org/lkml/acPAzdtjK5w-rNqC@J2N7QTR9R3/
The summary is:
* Currently, irqentry_exit_to_kernel_mode() handles both involuntary
preemption AND state management necessary for exception return.
* When scheduling (including involuntary preemption), arm64 needs to
have all arm64-specific exceptions unmasked, though regular interrupts
must be masked.
* Prior to the state management for exception return, arm64 needs to
mask a number of arm64-specific exceptions, and perform some work with
these exceptions masked (with RCU watching, etc).
While in theory it is possible to handle this with a new arch_*() hook
called somewhere under irqentry_exit_to_kernel_mode(), this is fragile
and complicated, and doesn't match the flow used for exception return to
user mode, which has a separate 'prepare' step (where preemption can
occur) prior to the state management.
To solve this, refactor irqentry_exit_to_kernel_mode() to match the
style of {irqentry,syscall}_exit_to_user_mode(), moving preemption logic
into a new irqentry_exit_to_kernel_mode_preempt() function, and moving
state management in a new irqentry_exit_to_kernel_mode_after_preempt()
function. The existing irqentry_exit_to_kernel_mode() is left as a
caller of both of these, avoiding the need to modify existing callers.
There should be no functional change as a result of this change.
[ tglx: Updated kernel doc ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-6-mark.rutland@arm.com
|
|
The generic irqentry code has entry/exit functions specifically for
exceptions taken from user mode, but doesn't have entry/exit functions
specifically for exceptions taken from kernel mode.
It would be helpful to have separate entry/exit functions specifically
for exceptions taken from kernel mode. This would make the structure of
the entry code more consistent, and would make it easier for
architectures to manage logic specific to exceptions taken from kernel
mode.
Move the logic specific to kernel mode out of irqentry_enter() and
irqentry_exit() into new irqentry_enter_from_kernel_mode() and
irqentry_exit_to_kernel_mode() functions. These are marked
__always_inline and placed in irq-entry-common.h, as with
irqentry_enter_from_user_mode() and irqentry_exit_to_user_mode(), so
that they can be inlined into architecture-specific wrappers. The
existing out-of-line irqentry_enter() and irqentry_exit() functions
retained as callers of the new functions.
The lockdep assertion from irqentry_exit() is moved into
irqentry_exit_to_user_mode() and irqentry_exit_to_kernel_mode(). This
was previously missing from irqentry_exit_to_user_mode() when called
directly, and any new lockdep assertion failure relating from this
change is a latent bug.
Aside from the lockdep change noted above, there should be no functional
change as a result of this change.
[ tglx: Updated kernel doc ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-5-mark.rutland@arm.com
|
|
Subsequent patches will rework the irqentry_*() functions. The end
result (and the intermediate diffs) will be much clearer if the
prototype for the irqentry_enter() function is moved later, immediately
before the prototype of the irqentry_exit() function.
Move the prototype later.
This is purely a move; there should be no functional change as a result
of this change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-4-mark.rutland@arm.com
|
|
local_irq_enable_exit_to_user() and local_irq_disable_exit_to_user() are
never overridden by architecture code, and are always equivalent to
local_irq_enable() and local_irq_disable().
These functions were added on the assumption that arm64 would override
them to manage 'DAIF' exception masking, as described by Thomas Gleixner
in these threads:
https://lore.kernel.org/all/20190919150809.340471236@linutronix.de/
https://lore.kernel.org/all/alpine.DEB.2.21.1910240119090.1852@nanos.tec.linutronix.de/
In practice arm64 did not need to override either. Prior to moving to
the generic irqentry code, arm64's management of DAIF was reworked in
commit:
97d935faacde ("arm64: Unmask Debug + SError in do_notify_resume()")
Since that commit, arm64 only masks interrupts during the 'prepare' step
when returning to user mode, and masks other DAIF exceptions later.
Within arm64_exit_to_user_mode(), the arm64 entry code is as follows:
local_irq_disable();
exit_to_user_mode_prepare_legacy(regs);
local_daif_mask();
mte_check_tfsr_exit();
exit_to_user_mode();
Remove the unnecessary local_irq_enable_exit_to_user() and
local_irq_disable_exit_to_user() functions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-3-mark.rutland@arm.com
|
|
The kerneldoc comment for irqentry_enter() refers to idtentry_exit(),
which is an accidental holdover from the x86 entry code that the generic
irqentry code was based on.
Correct this to refer to irqentry_exit().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260407131650.3813777-2-mark.rutland@arm.com
|
|
- Restore the state of the standard black-and-white and 16-color Linux
logos (no longer auto-enabled since commit 994fcd4b107d747b
("video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by
default")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/67dd5553e9289757c274d79ce1b13fca33fde25d.1772446429.git.geert@linux-m68k.org
|
|
Replace unbounded sprintf() with the safer snprintf().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260318001632.2974-3-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Fix sparse warning:
sound/usb/qcom/qc_audio_offload.c:943:27: sparse: incorrect type in argument 2
expected unsigned int val but got snd_pcm_format_t.
Explicitly cast pcm_format to unsigned int for snd_mask_leave().
Fixes: 326bbc348298 ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604062109.Oxi8JjWW-lkp@intel.com/
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20260408083311.774173-1-songxiebing@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
rust-next
Pull pin-init updates from Benno Lossin:
- Replace the 'Zeroable' impls for 'Option<NonZero*>' with impls of
'ZeroableOption' for 'NonZero*'.
- Improve feature gate handling for unstable features.
- Declutter the documentation of implementations of 'Zeroable' for
tuples.
- Replace uses of 'addr_of[_mut]!' with '&raw [mut]'.
* tag 'pin-init-v7.1' of https://github.com/Rust-for-Linux/linux:
rust: pin-init: replace `addr_of_mut!` with `&raw mut`
rust: pin-init: implement ZeroableOption for NonZero* integer types
rust: pin-init: doc: de-clutter documentation with fake-variadics
rust: pin-init: properly document let binding workaround
rust: pin-init: build: simplify use of nightly features
|
|
https://github.com/Rust-for-Linux/linux into rust-next
Pull timekeeping updates from Andreas Hindborg:
- Expand the example section in the 'HrTimer' documentation.
- Mark the 'ClockSource' trait as unsafe to ensure valid values for
'ktime_get()'.
- Add 'Delta::from_nanos()'.
This is a back merge since the pull request has a newer base -- we will
avoid that in the future.
And, given it is a back merge, it happens to resolve the "subtle" conflict
around '--remap-path-{prefix,scope}' that I discussed in linux-next [1],
plus a few other common conflicts. The result matches what we did for
next-20260407.
The actual diffstat (i.e. using a temporary merge of upstream first) is:
rust/kernel/time.rs | 32 ++++-
rust/kernel/time/hrtimer.rs | 336 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 362 insertions(+), 6 deletions(-)
Link: https://lore.kernel.org/linux-next/CANiq72kdxB=W3_CV1U44oOK3SssztPo2wLDZt6LP94TEO+Kj4g@mail.gmail.com/ [1]
* tag 'rust-timekeeping-for-v7.1' of https://github.com/Rust-for-Linux/linux:
hrtimer: add usage examples to documentation
rust: time: make ClockSource unsafe trait
rust/time: Add Delta::from_nanos()
|
|
Delta 410 uses snd_akm4xxx_reset() both around DFS changes and from
its PM callbacks, but the AK4529 case in this helper is still left
unimplemented and never drives the codec reset path.
The AK4529 datasheet documents register 09h.RSTN as an internal
timing reset. Clearing RSTN powers down the ADC and DAC blocks, but
does not reinitialize the register map. That matches the existing
ak4xxx helper model, which already keeps the desired codec state in
the software register cache.
Implement AK4529 reset handling by clearing 09h.RSTN on state == 1,
then replaying the cached register image and setting RSTN back to 1
on state == 0.
This restores cached Delta 410 mixer state after resume and gives
the AK4529 DFS-change path a real codec reset sequence.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260407-ak4529-reset-handling-v1-1-b971c18b1a32@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used. Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.
It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
interwave still leaves both its ISA and PnP PM callbacks disabled even
though the shared GUS suspend and resume path now exists.
This board needs InterWave-specific glue around the shared GUS PM path.
The attached WSS codec has its own register image that must be saved and
restored across suspend, the InterWave-specific GF1 compatibility,
decode, MPU401, and emulation settings must be rewritten after the
shared GF1 resume path reinitializes the chip, and the probe-detected
InterWave memory layout must be restored without rerunning the
destructive DRAM/ROM detection path.
Track the optional STB TEA6330T bus at probe time, restore its cached
mixer state after resume, add resume-safe helpers for the InterWave
register and memory-configuration state, and wire both the ISA and PnP
front-ends up to the shared GUS PM helpers.
The resume path intentionally restores only the cached hardware setup.
It does not attempt to preserve sample RAM contents across suspend.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407-alsa-interwave-pm-v2-3-8dd96c6129e9@gmail.com
|
|
The InterWave STB variant uses a TEA6330T mixer on its private
I2C bus. The mixer state is cached in software, but there is no
helper to push that register image back to hardware after system
resume.
Add a small restore helper that reapplies the cached TEA6330T
register image to the device so board drivers can restore the
external mixer state as part of their PM resume path.
Take snd_i2c_lock() around the full device lookup and restore
sequence so the bus device list traversal is also protected.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407-alsa-interwave-pm-v2-2-8dd96c6129e9@gmail.com
|
|
Move the remaining standalone snd_tea6330t_detect() EXPORT_SYMBOL()
declaration next to its function definition so tea6330t.c follows the
usual layout.
No functional change intended.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260407-alsa-interwave-pm-v2-1-8dd96c6129e9@gmail.com
|
|
The original iuutool author is Juan Carlos Borrás - fix the spelling.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Building ARCH=um on glibc >= 2.43 fails:
arch/um/drivers/cow_user.c: error: implicit declaration of
function 'strrchr' [-Wimplicit-function-declaration]
glibc 2.43's C23 const-preserving strrchr() macro does not survive
UML's global -Dstrrchr=kernel_strrchr remap from arch/um/Makefile.
Call kernel_strrchr() directly in cow_user.c so the source no longer
depends on the -D rewrite.
Fixes: 2c51a4bc0233 ("um: fix strrchr() problems")
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260408070102.2325572-1-michael.bommarito@gmail.com
[remove unnecessary 'extern']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the probe does not check whether getting the regmap succeeded.
This can cause crash when regmap is used, if it wasn't successfully
obtained. Failing to get the regmap is unlikely, especially since this
driver is expected to be kicked by the MFD driver only after registering
the regmap - but it is still better to handle this gracefully.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e7eef0bd4075 ("regulator: bd71828-regulator.c: Fix LDON-HEAD mode")
Link: https://patch.msgid.link/5bfffee380863bcf24f3062e48094c8eb7b1342f.1775565381.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Just use the michael_mic() function from cfg80211 instead of a local
implementation of it using the crypto_shash API.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-6-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Just use the michael_mic() function from cfg80211 instead of a local
implementation of it using the crypto_shash API.
Note: when the kernel is booted with fips=1,
crypto_alloc_shash("michael_mic", 0, 0) always returned
ERR_PTR(-ENOENT), because Michael MIC is not a "FIPS allowed" algorithm.
For now, just preserve that behavior exactly, to ensure that TKIP is not
allowed to be used in FIPS mode. This logic actually seems to disable
the entire driver in FIPS mode and not just TKIP, but that was the
existing behavior. Supporting this driver in FIPS mode, if anyone
actually needs it there, should be a separate commit.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-5-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Just use the michael_mic() function from cfg80211 instead of a local
implementation of it using the crypto_shash API.
Note: when the kernel is booted with fips=1,
crypto_alloc_shash("michael_mic", 0, 0) always returned
ERR_PTR(-ENOENT), because Michael MIC is not a "FIPS allowed" algorithm.
For now, just preserve that behavior exactly, to ensure that TKIP is not
allowed to be used in FIPS mode. This logic actually seems to disable
the entire driver in FIPS mode and not just TKIP, but that was the
existing behavior. Supporting this driver in FIPS mode, if anyone
actually needs it there, should be a separate commit.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-4-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Export michael_mic() so that the ath11k and ath12k drivers can call it.
In addition, move it from mac80211 to cfg80211 so that the ipw2x00
drivers, which depend on cfg80211 but not mac80211, can also call it.
Currently these drivers have their own local implementations of
michael_mic() based on crypto_shash, which is redundant and inefficient.
By consolidating all the Michael MIC code into cfg80211, we'll be able
to remove the duplicate Michael MIC code in the crypto/ directory.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-3-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Rename the driver-local michael_mic() function to libipw_michael_mic()
to prevent a name conflict with the common michael_mic() function.
Note that this code will be superseded later when libipw starts using
the common michael_mic(). This commit just prevents a bisection hazard.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-2-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v7.1 (PR #3)
Add ath12k support for IPQ5424.
And of course there is the usual set of cleanups and bug fixes touching
the ath10k and ath12k drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
