| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Avoid fd_install() until there are no more potential error paths, to
avoid put_unused_fd() after the fd is made visible to userspace.
Fixes: 2e6a8a1fe2b2 ("drm/msm: Add VM_BIND ioctl")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/665365/
|
|
Ilya Leoshkevich says:
====================
perf/s390: Regression: Move uid filtering to BPF filters
v4: https://lore.kernel.org/bpf/20250806114227.14617-1-iii@linux.ibm.com/
v4 -> v5: Fix a typo in the commit message (Yonghong).
v3: https://lore.kernel.org/bpf/20250805130346.1225535-1-iii@linux.ibm.com/
v3 -> v4: Rename the new field to dont_enable (Alexei, Eduard).
Switch the Fixes: tag in patch 2 (Alexander, Thomas).
Fix typos in the cover letter (Thomas).
v2: https://lore.kernel.org/bpf/20250728144340.711196-1-tmricht@linux.ibm.com/
v2 -> v3: Use no_ioctl_enable in perf.
v1: https://lore.kernel.org/bpf/20250725093405.3629253-1-tmricht@linux.ibm.com/
v1 -> v2: Introduce no_ioctl_enable (Jiri).
Hi,
This series fixes a regression caused by moving UID filtering to BPF.
The regression affects all events that support auxiliary data, most
notably, "cycles" events on s390, but also PT events on Intel. The
symptom is missing events when UID filtering is enabled.
Patch 1 introduces a new option for the
bpf_program__attach_perf_event_opts() function.
Patch 2 makes use of it in perf, and also contains a lot of technical
details of why exactly the problem is occurring.
Thanks to Thomas Richter for the investigation and the initial version
of this fix, and to Jiri Olsa for suggestions.
Best regards,
Ilya
====================
Link: https://patch.msgid.link/20250806162417.19666-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On s390, and, in general, on all platforms where the respective event
supports auxiliary data gathering, the command:
# ./perf record -u 0 -aB --synth=no -- ./perf test -w thloop
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
# ./perf report --stats | grep SAMPLE
#
does not generate samples in the perf.data file. On x86 the command:
# sudo perf record -e intel_pt// -u 0 ls
is broken too.
Looking at the sequence of calls in 'perf record' reveals this
behavior:
1. The event 'cycles' is created and enabled:
record__open()
+-> evlist__apply_filters()
+-> perf_bpf_filter__prepare()
+-> bpf_program.attach_perf_event()
+-> bpf_program.attach_perf_event_opts()
+-> __GI___ioctl(..., PERF_EVENT_IOC_ENABLE, ...)
The event 'cycles' is enabled and active now. However the event's
ring-buffer to store the samples generated by hardware is not
allocated yet.
2. The event's fd is mmap()ed to create the ring buffer:
record__open()
+-> record__mmap()
+-> record__mmap_evlist()
+-> evlist__mmap_ex()
+-> perf_evlist__mmap_ops()
+-> mmap_per_cpu()
+-> mmap_per_evsel()
+-> mmap__mmap()
+-> perf_mmap__mmap()
+-> mmap()
This allocates the ring buffer for the event 'cycles'. With mmap()
the kernel creates the ring buffer:
perf_mmap(): kernel function to create the event's ring
| buffer to save the sampled data.
|
+-> ring_buffer_attach(): Allocates memory for ring buffer.
| The PMU has auxiliary data setup function. The
| has_aux(event) condition is true and the PMU's
| stop() is called to stop sampling. It is not
| restarted:
|
| if (has_aux(event))
| perf_event_stop(event, 0);
|
+-> cpumsf_pmu_stop():
Hardware sampling is stopped. No samples are generated and saved
anymore.
3. After the event 'cycles' has been mapped, the event is enabled a
second time in:
__cmd_record()
+-> evlist__enable()
+-> __evlist__enable()
+-> evsel__enable_cpu()
+-> perf_evsel__enable_cpu()
+-> perf_evsel__run_ioctl()
+-> perf_evsel__ioctl()
+-> __GI___ioctl(., PERF_EVENT_IOC_ENABLE, .)
The second
ioctl(fd, PERF_EVENT_IOC_ENABLE, 0);
is just a NOP in this case. The first invocation in (1.) sets the
event::state to PERF_EVENT_STATE_ACTIVE. The kernel functions
perf_ioctl()
+-> _perf_ioctl()
+-> _perf_event_enable()
+-> __perf_event_enable()
return immediately because event::state is already set to
PERF_EVENT_STATE_ACTIVE.
This happens on s390, because the event 'cycles' offers the possibility
to save auxilary data. The PMU callbacks setup_aux() and free_aux() are
defined. Without both callback functions, cpumsf_pmu_stop() is not
invoked and sampling continues.
To remedy this, remove the first invocation of
ioctl(..., PERF_EVENT_IOC_ENABLE, ...).
in step (1.) Create the event in step (1.) and enable it in step (3.)
after the ring buffer has been mapped.
Output after:
# ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.876 MB perf.data ]
# ./perf report --stats | grep SAMPLE
SAMPLE events: 16200 (99.5%)
SAMPLE events: 16200
#
The software event succeeded both before and after the patch:
# ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
./perf test -w thloop 2
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 2.870 MB perf.data ]
# ./perf report --stats | grep SAMPLE
SAMPLE events: 53506 (99.8%)
SAMPLE events: 53506
#
Fixes: b4c658d4d63d61 ("perf target: Remove uid from target")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Co-developed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250806162417.19666-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Automatically enabling a perf event after attaching a BPF prog to it is
not always desirable.
Add a new "dont_enable" field to struct bpf_perf_event_opts. While
introducing "enable" instead would be nicer in that it would avoid
a double negation in the implementation, it would make
DECLARE_LIBBPF_OPTS() less efficient.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Co-developed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250806162417.19666-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
__qgroup_excl_accounting() uses the qgroup iterator machinery to
update the account of one qgroups usage for all its parent hierarchy,
when we either add or remove a relation and have only exclusive usage.
However, there is a small bug there: we loop with an extra iteration
temporary qgroup called `cur` but never actually refer to that in the
body of the loop. As a result, we redundantly account the same usage to
the first qgroup in the list.
This can be reproduced in the following way:
mkfs.btrfs -f -O squota <dev>
mount <dev> <mnt>
btrfs subvol create <mnt>/sv
dd if=/dev/zero of=<mnt>/sv/f bs=1M count=1
sync
btrfs qgroup create 1/100 <mnt>
btrfs qgroup create 2/200 <mnt>
btrfs qgroup assign 1/100 2/200 <mnt>
btrfs qgroup assign 0/256 1/100 <mnt>
btrfs qgroup show <mnt>
and the broken result is (note the 2MiB on 1/100 and 0Mib on 2/100):
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 2.03MiB 2.03MiB 2/100<1 member qgroup>
2/100 0.00B 0.00B <0 member qgroups>
With this fix, which simply re-uses `qgroup` as the iteration variable,
we see the expected result:
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 1.02MiB 1.02MiB 2/100<1 member qgroup>
2/100 1.02MiB 1.02MiB <0 member qgroups>
The existing fstests did not exercise two layer inheritance so this bug
was missed. I intend to add that testing there, as well.
Fixes: a0bdc04b0732 ("btrfs: qgroup: use qgroup_iterator in __qgroup_excl_accounting()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We call btrfs_zone_finish_one_bg() to zone finish one block group and make
room to activate another block group. Currently, we can choose a metadata
block group as a target. But, as we reserve an active metadata block group,
we no longer want to select a metadata block group. So, skip it in the
loop.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is an internal report that balance triggered transaction abort,
with the following call trace:
item 85 key (594509824 169 0) itemoff 12599 itemsize 33
extent refs 1 gen 197740 flags 2
ref#0: tree block backref root 7
item 86 key (594558976 169 0) itemoff 12566 itemsize 33
extent refs 1 gen 197522 flags 2
ref#0: tree block backref root 7
...
BTRFS error (device loop0): extent item not found for insert, bytenr 594526208 num_bytes 16384 parent 449921024 root_objectid 934 owner 1 offset 0
BTRFS error (device loop0): failed to run delayed ref for logical 594526208 num_bytes 16384 type 182 action 1 ref_mod 1: -117
------------[ cut here ]------------
BTRFS: Transaction aborted (error -117)
WARNING: CPU: 1 PID: 6963 at ../fs/btrfs/extent-tree.c:2168 btrfs_run_delayed_refs+0xfa/0x110 [btrfs]
And btrfs check doesn't report anything wrong related to the extent
tree.
[CAUSE]
The cause is a little complex, firstly the extent tree indeed doesn't
have the backref for 594526208.
The extent tree only have the following two backrefs around that bytenr
on-disk:
item 65 key (594509824 METADATA_ITEM 0) itemoff 13880 itemsize 33
refs 1 gen 197740 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
item 66 key (594558976 METADATA_ITEM 0) itemoff 13847 itemsize 33
refs 1 gen 197522 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
But the such missing backref item is not an corruption on disk, as the
offending delayed ref belongs to subvolume 934, and that subvolume is
being dropped:
item 0 key (934 ROOT_ITEM 198229) itemoff 15844 itemsize 439
generation 198229 root_dirid 256 bytenr 10741039104 byte_limit 0 bytes_used 345571328
last_snapshot 198229 flags 0x1000000000001(RDONLY) refs 0
drop_progress key (206324 EXTENT_DATA 2711650304) drop_level 2
level 2 generation_v2 198229
And that offending tree block 594526208 is inside the dropped range of
that subvolume. That explains why there is no backref item for that
bytenr and why btrfs check is not reporting anything wrong.
But this also shows another problem, as btrfs will do all the orphan
subvolume cleanup at a read-write mount.
So half-dropped subvolume should not exist after an RW mount, and
balance itself is also exclusive to subvolume cleanup, meaning we
shouldn't hit a subvolume half-dropped during relocation.
The root cause is, there is no orphan item for this subvolume.
In fact there are 5 subvolumes from around 2021 that have the same
problem.
It looks like the original report has some older kernels running, and
caused those zombie subvolumes.
Thankfully upstream commit 8d488a8c7ba2 ("btrfs: fix subvolume/snapshot
deletion not triggered on mount") has long fixed the bug.
[ENHANCEMENT]
For repairing such old fs, btrfs-progs will be enhanced.
Considering how delayed the problem will show up (at run delayed ref
time) and at that time we have to abort transaction already, it is too
late.
Instead here we reject any half-dropped subvolume for reloc tree at the
earliest time, preventing confusion and extra time wasted on debugging
similar bugs.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we only log an error message if we can't find the block group
for a log tree extent buffer when unaccounting it (while freeing a log
tree). A missing block group means something is seriously wrong and we
end up leaking space from the metadata space info. So return -ENOENT in
case we don't find the block group.
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Inside nocow_one_range(), if the checksum cloning for data reloc inode
failed, we call btrfs_cleanup_ordered_extents() to cleanup the just
allocated ordered extents.
But unlike extent_clear_unlock_delalloc(),
btrfs_cleanup_ordered_extents() requires a length, not an inclusive end
bytenr.
This can be problematic, as the @end is normally way larger than @len.
This means btrfs_cleanup_ordered_extents() can be called on folios
out of the correct range, and if the out-of-range folio is under
writeback, we can incorrectly clear the ordered flag of the folio, and
trigger the DEBUG_WARN() inside btrfs_writepage_cow_fixup().
Fix the wrong parameter with correct length instead.
Fixes: 94f6c5c17e52 ("btrfs: move ordered extent cleanup to where they are allocated")
CC: stable@vger.kernel.org # 6.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When hitting a large folio, btrfs_cleanup_ordered_extents() will get the
same large folio multiple times, and clearing the same range again and
again.
Thankfully this is not causing anything wrong, just inefficiency.
This is caused by the fact that we're iterating folios using the old
page index, thus can hit the same large folio again and again.
Enhance it by increasing @index to the index of the folio end, and only
increase @index by 1 if we failed to grab a folio.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a potential deadlock that can happen in
try_release_subpage_extent_buffer() because the irq-safe xarray spin
lock fs_info->buffer_tree is being acquired before the irq-unsafe
eb->refs_lock.
This leads to the potential race:
// T1 (random eb->refs user) // T2 (release folio)
spin_lock(&eb->refs_lock);
// interrupt
end_bbio_meta_write()
btrfs_meta_folio_clear_writeback()
btree_release_folio()
folio_test_writeback() //false
try_release_extent_buffer()
try_release_subpage_extent_buffer()
xa_lock_irq(&fs_info->buffer_tree)
spin_lock(&eb->refs_lock); // blocked; held by T1
buffer_tree_clear_mark()
xas_lock_irqsave() // blocked; held by T2
I believe that the spin lock can safely be replaced by an rcu_read_lock.
The xa_for_each loop does not need the spin lock as it's already
internally protected by the rcu_read_lock. The extent buffer is also
protected by the rcu_read_lock so it won't be freed before we take the
eb->refs_lock and check the ref count.
The rcu_read_lock is taken and released every iteration, just like the
spin lock, which means we're not protected against concurrent
insertions into the xarray. This is fine because we rely on
folio->private to detect if there are any ebs remaining in the folio.
There is already some precedent for this with find_extent_buffer_nolock,
which loads an extent buffer from the xarray with only rcu_read_lock.
lockdep warning:
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
6.16.0-0_fbk701_debug_rc0_123_g4c06e63b9203 #1 Tainted: G E N
-----------------------------------------------------
kswapd0/66 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffff000011ffd600 (&eb->refs_lock){+.+.}-{3:3}, at: try_release_extent_buffer+0x18c/0x560
and this task is already holding:
ffff0000c1d91b88 (&buffer_xa_class){-.-.}-{3:3}, at: try_release_extent_buffer+0x13c/0x560
which would create a new lock dependency:
(&buffer_xa_class){-.-.}-{3:3} -> (&eb->refs_lock){+.+.}-{3:3}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&buffer_xa_class){-.-.}-{3:3}
... which became HARDIRQ-irq-safe at:
lock_acquire+0x178/0x358
_raw_spin_lock_irqsave+0x60/0x88
buffer_tree_clear_mark+0xc4/0x160
end_bbio_meta_write+0x238/0x398
btrfs_bio_end_io+0x1f8/0x330
btrfs_orig_write_end_io+0x1c4/0x2c0
bio_endio+0x63c/0x678
blk_update_request+0x1c4/0xa00
blk_mq_end_request+0x54/0x88
virtblk_request_done+0x124/0x1d0
blk_mq_complete_request+0x84/0xa0
virtblk_done+0x130/0x238
vring_interrupt+0x130/0x288
__handle_irq_event_percpu+0x1e8/0x708
handle_irq_event+0x98/0x1b0
handle_fasteoi_irq+0x264/0x7c0
generic_handle_domain_irq+0xa4/0x108
gic_handle_irq+0x7c/0x1a0
do_interrupt_handler+0xe4/0x148
el1_interrupt+0x30/0x50
el1h_64_irq_handler+0x14/0x20
el1h_64_irq+0x6c/0x70
_raw_spin_unlock_irq+0x38/0x70
__run_timer_base+0xdc/0x5e0
run_timer_softirq+0xa0/0x138
handle_softirqs.llvm.13542289750107964195+0x32c/0xbd0
____do_softirq.llvm.17674514681856217165+0x18/0x28
call_on_irq_stack+0x24/0x30
__irq_exit_rcu+0x164/0x430
irq_exit_rcu+0x18/0x88
el1_interrupt+0x34/0x50
el1h_64_irq_handler+0x14/0x20
el1h_64_irq+0x6c/0x70
arch_local_irq_enable+0x4/0x8
do_idle+0x1a0/0x3b8
cpu_startup_entry+0x60/0x80
rest_init+0x204/0x228
start_kernel+0x394/0x3f0
__primary_switched+0x8c/0x8958
to a HARDIRQ-irq-unsafe lock:
(&eb->refs_lock){+.+.}-{3:3}
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0x178/0x358
_raw_spin_lock+0x4c/0x68
free_extent_buffer_stale+0x2c/0x170
btrfs_read_sys_array+0x1b0/0x338
open_ctree+0xeb0/0x1df8
btrfs_get_tree+0xb60/0x1110
vfs_get_tree+0x8c/0x250
fc_mount+0x20/0x98
btrfs_get_tree+0x4a4/0x1110
vfs_get_tree+0x8c/0x250
do_new_mount+0x1e0/0x6c0
path_mount+0x4ec/0xa58
__arm64_sys_mount+0x370/0x490
invoke_syscall+0x6c/0x208
el0_svc_common+0x14c/0x1b8
do_el0_svc+0x4c/0x60
el0_svc+0x4c/0x160
el0t_64_sync_handler+0x70/0x100
el0t_64_sync+0x168/0x170
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&eb->refs_lock);
local_irq_disable();
lock(&buffer_xa_class);
lock(&eb->refs_lock);
<Interrupt>
lock(&buffer_xa_class);
*** DEADLOCK ***
2 locks held by kswapd0/66:
#0: ffff800085506e40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xe8/0xe50
#1: ffff0000c1d91b88 (&buffer_xa_class){-.-.}-{3:3}, at: try_release_extent_buffer+0x13c/0x560
Link: https://www.kernel.org/doc/Documentation/locking/lockdep-design.rst#:~:text=Multi%2Dlock%20dependency%20rules%3A
Fixes: 19d7f65f032f ("btrfs: convert the buffer_radix to an xarray")
CC: stable@vger.kernel.org # 6.16+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I accidentally added a bug in pptp_xmit() that syzbot caught for us.
Only call ip_rt_put() if a route has been allocated.
BUG: unable to handle page fault for address: ffffffffffffffdb
PGD df3b067 P4D df3b067 PUD df3d067 PMD 0
Oops: Oops: 0002 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6346 Comm: syz.0.336 Not tainted 6.16.0-next-20250804-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:arch_atomic_add_return arch/x86/include/asm/atomic.h:85 [inline]
RIP: 0010:raw_atomic_sub_return_release include/linux/atomic/atomic-arch-fallback.h:846 [inline]
RIP: 0010:atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:327 [inline]
RIP: 0010:__rcuref_put include/linux/rcuref.h:109 [inline]
RIP: 0010:rcuref_put+0x172/0x210 include/linux/rcuref.h:173
Call Trace:
<TASK>
dst_release+0x24/0x1b0 net/core/dst.c:167
ip_rt_put include/net/route.h:285 [inline]
pptp_xmit+0x14b/0x1a90 drivers/net/ppp/pptp.c:267
__ppp_channel_push+0xf2/0x1c0 drivers/net/ppp/ppp_generic.c:2166
ppp_channel_push+0x123/0x660 drivers/net/ppp/ppp_generic.c:2198
ppp_write+0x2b0/0x400 drivers/net/ppp/ppp_generic.c:544
vfs_write+0x27b/0xb30 fs/read_write.c:684
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: de9c4861fb42 ("pptp: ensure minimal skb length in pptp_xmit()")
Reported-by: syzbot+27d7cfbc93457e472e00@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/689095a5.050a0220.1fc43d.0009.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807142146.2877060-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The OOB layout used by the driver has two distinct regions which contains
hardware specific ECC data, yet the qcom_spi_ooblayout_ecc() function sets
the same offset and length values for both regions which is clearly wrong.
Change the code to calculate the correct values for both regions.
For reference, the following table shows the computed offset and length
values for various OOB size/ECC strength configurations:
+-----------------+-----------------+
|before the change| after the change|
+-------+----------+--------+--------+--------+--------+--------+
| OOB | ECC | region | region | region | region | region |
| size | strength | index | offset | length | offset | length |
+-------+----------+--------+--------+--------+--------+--------+
| 128 | 8 | 0 | 113 | 15 | 0 | 49 |
| | | 1 | 113 | 15 | 65 | 63 |
+-------+----------+--------+--------+--------+--------+--------+
| 128 | 4 | 0 | 117 | 11 | 0 | 37 |
| | | 1 | 117 | 11 | 53 | 75 |
+-------+----------+--------+--------+--------+--------+--------+
| 64 | 4 | 0 | 53 | 11 | 0 | 37 |
| | | 1 | 53 | 11 | 53 | 11 |
+-------+----------+--------+--------+--------+--------+--------+
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250805-qpic-snand-oob-ecc-fix-v2-1-e6f811c70d6f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the driver is not able to handle the case that a SPI device
specifies a higher spi-max-frequency than half of per-clk:
per-clk should be at least two times of transfer speed
Fix this by clamping to the max possible value and use the minimum SCK
period of 2 cycles.
Fixes: 77736a98b859 ("spi: lpspi: add the error info of transfer speed setting")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20250807100742.9917-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because it's only used in sbitmap.c
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250807032413.1469456-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
if (index == sb->map_nr - 1)
return sb->depth - (index << sb->shift);
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250807032413.1469456-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 528589947c180 ("nvmet: initialize discovery subsys after debugfs
is initialized") changed nvmet_init() to initialize nvme discovery after
"nvmet" debugfs directory is initialized. The change broke nvmet_exit()
because discovery subsystem now depends on debugfs. Debugfs should be
destroyed after discovery subsystem. Fix nvmet_exit() to do that.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs96AfFQpyDKF_MdfJsnOEo=2V7dQgqjFv+k3t7H-=yGhA@mail.gmail.com/
Fixes: 528589947c180 ("nvmet: initialize discovery subsys after debugfs is initialized")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20250807053507.2794335-1-mkhalfella@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot managed to reach this WARN_ON_ONCE by passing a huge level
value, remove it.
WARNING: CPU: 0 PID: 5853 at net/netfilter/nft_socket.c:220 nft_socket_init+0x2f4/0x3d0 net/netfilter/nft_socket.c:220
Reported-by: syzbot+a225fea35d7baf8dbdc3@syzkaller.appspotmail.com
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Smatch complains that these look like error paths with missing error
codes, especially the one where we return if nf_log_is_registered() is
true:
net/netfilter/nf_conntrack_standalone.c:575 nf_conntrack_log_invalid_sysctl()
warn: missing error code? 'ret'
In fact, all these return zero deliberately. Change them to return a
literal instead which helps readability as well as silencing the warning.
Fixes: e89a68046687 ("netfilter: load nf_log_syslog on enabling nf_conntrack_log_invalid")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Dan Carpenter says:
Commit 17a20e09f086 ("netfilter: nft_set: remove one argument from
lookup and update functions") [..] leads to the following Smatch
static checker warning:
net/netfilter/nft_set_pipapo_avx2.c:1269 nft_pipapo_avx2_lookup()
error: uninitialized symbol 'ext'.
Fix this by initing ext to NULL and set it only once we've found
a match.
Fixes: 17a20e09f086 ("netfilter: nft_set: remove one argument from lookup and update functions")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netfilter-devel/aJBzc3V5wk-yPOnH@stanley.mountain/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Same pattern as previous patch: do not keep the expectation object
alive via refcount, only store a cookie value and then use that
as the skip hint for dump resumption.
AFAICS this has the same issue as the one resolved in the conntrack
dumper, when we do
if (!refcount_inc_not_zero(&exp->use))
to increment the refcount, there is a chance that exp == last, which
causes a double-increment of the refcount and subsequent memory leak.
Fixes: cf6994c2b981 ("[NETFILTER]: nf_conntrack_netlink: sync expectation dumping with conntrack table dumping")
Fixes: e844a928431f ("netfilter: ctnetlink: allow to dump expectation per master conntrack")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There is a reference count leak in ctnetlink_dump_table():
if (res < 0) {
nf_conntrack_get(&ct->ct_general); // HERE
cb->args[1] = (unsigned long)ct;
...
While its very unlikely, its possible that ct == last.
If this happens, then the refcount of ct was already incremented.
This 2nd increment is never undone.
This prevents the conntrack object from being released, which in turn
keeps prevents cnet->count from dropping back to 0.
This will then block the netns dismantle (or conntrack rmmod) as
nf_conntrack_cleanup_net_list() will wait forever.
This can be reproduced by running conntrack_resize.sh selftest in a loop.
It takes ~20 minutes for me on a preemptible kernel on average before
I see a runaway kworker spinning in nf_conntrack_cleanup_net_list.
One fix would to change this to:
if (res < 0) {
if (ct != last)
nf_conntrack_get(&ct->ct_general);
But this reference counting isn't needed in the first place.
We can just store a cookie value instead.
A followup patch will do the same for ctnetlink_exp_dump_table,
it looks to me as if this has the same problem and like
ctnetlink_dump_table, we only need a 'skip hint', not the actual
object so we can apply the same cookie strategy there as well.
Fixes: d205dc40798d ("[NETFILTER]: ctnetlink: fix deadlock in table dumping")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Some Kconfig symbols were changed to depend on the 'bool' symbol
NETFILTER_XTABLES_LEGACY, which means they can now be set to built-in
when the xtables code itself is in a loadable module:
x86_64-linux-ld: vmlinux.o: in function `arpt_unregister_table_pre_exit':
(.text+0x1831987): undefined reference to `xt_find_table'
x86_64-linux-ld: vmlinux.o: in function `get_info.constprop.0':
arp_tables.c:(.text+0x1831aab): undefined reference to `xt_request_find_table_lock'
x86_64-linux-ld: arp_tables.c:(.text+0x1831bea): undefined reference to `xt_table_unlock'
x86_64-linux-ld: vmlinux.o: in function `do_arpt_get_ctl':
arp_tables.c:(.text+0x183205d): undefined reference to `xt_find_table_lock'
x86_64-linux-ld: arp_tables.c:(.text+0x18320c1): undefined reference to `xt_table_unlock'
x86_64-linux-ld: arp_tables.c:(.text+0x183219a): undefined reference to `xt_recseq'
Change these to depend on both NETFILTER_XTABLES and
NETFILTER_XTABLES_LEGACY.
Fixes: 9fce66583f06 ("netfilter: Exclude LEGACY TABLES on PREEMPT_RT.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Westphal <fw@strlen.de>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This reverts commit b5048d27872a9734d142540ea23c3e897e47e05c.
Its been more than a year, hope my motivation lasts a bit longer than
last time :-)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With no more users of the legacy GPIO line value setters - .set() and
.set_multiple() - we can now remove them from the kernel.
Link: https://lore.kernel.org/r/20250725074651.14002-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
|
|
The split of Cirrus HD-audio codec driver may confuse users when
migrating from the previous kernel configs and leave the needed
drivers disabled. Although we've already set y as default, it's still
safer to paper over the wrong choices.
This patch marks the prompt of split CS420x and CS421x codec drivers
with CONFIG_EXPERT, so that they are all enabled when the top-level
CONFIG_SND_HDA_CODEC_CIRRUS is set.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
This patch adds the missing help text to the top-level
CONFIG_SND_HDA_CIRRUS_CODEC together with the explanation of
individual choices, and corrects the help texts that don't fit well
nowadays, too.
Fixes: 1cb8744a36c7 ("ALSA: hda/cirrus: Split to cs420x and cs421x drivers")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-4-tiwai@suse.de
|
|
The split of HDMI codec driver may confuse users when migrating from
the previous kernel configs and leave some drivers disabled
unexpectedly. Although we've already set y to all HDMI codec drivers
as default, it's still safer to paper over the wrong choices.
This patch marks the prompt of each HDMI codec driver with
CONFIG_EXPERT, so that they are all enabled when the top-level
CONFIG_SND_HDA_CODEC_HDMI is set.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
The patch also adds the missing help text to the top-level
CONFIG_SND_HDA_CODEC_HDMI together with the explanation of individual
choices, too.
Fixes: 73cd0490819d ("ALSA: hda/hdmi: Split vendor codec drivers")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-3-tiwai@suse.de
|
|
The split of Realtek HD-audio codec driver may cause confusions
especially when migrating from the previous kernel configurations
because it's hard to know which driver to be enabled.
Although we've already set default=y for those codec drivers, it may
still make people changing the stuff unnecessarily without knowing its
side effect.
This patch is for avoiding such pitfalls by marking the prompt of each
Realtek codec driver with CONFIG_EXPERT. For "normal" users (that is,
unless CONFIG_EXPERT is set), all Realtek HD-audio codecs are enabled
together with CONFIG_SND_HDA_CODEC_REALTEK; this is the very same
situation like the previous kernels, after all.
For users who really care about the minimalistic configuration, they
can turn each driver on/off individually after setting
CONFIG_EXPERT=y.
The patch also adds the missing help text to the top-level
CONFIG_SND_HDA_CODEC_REALTEK together with the explanation of
individual choices, too.
Fixes: aeeb85f26c3b ("ALSA: hda: Split Realtek HD-audio codec driver")
Link: https://lore.kernel.org/10172c80-daec-4e20-ab57-a483cf1afc02@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250806192541.21949-2-tiwai@suse.de
|
|
Commit b40c5f4fde22 ("udp: disable inner UDP checksum offloads in
IPsec case") tried to fix checksumming in UFO when the packets are
going through IPsec, so that we can't rely on offloads because the UDP
header and payload will be encrypted.
But when doing a TCP test over VXLAN going through IPsec transport
mode with GSO enabled (esp4_offload module loaded), I'm seeing broken
UDP checksums on the encap after successful decryption.
The skbs get to udp4_ufo_fragment/__skb_udp_tunnel_segment via
__dev_queue_xmit -> validate_xmit_skb -> skb_gso_segment and at this
point we've already dropped the dst (unless the device sets
IFF_XMIT_DST_RELEASE, which is not common), so need_ipsec is false and
we proceed with checksum offload.
Make need_ipsec also check the secpath, which is not dropped on this
callpath.
Fixes: b40c5f4fde22 ("udp: disable inner UDP checksum offloads in IPsec case")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This is partial revert of commit d53dda291bbd993a29b84d358d282076e3d01506.
This change causes traffic using GSO with SW crypto running through a
NIC capable of HW offload to no longer get segmented during
validate_xmit_xfrm, and is unrelated to the bonding use case mentioned
in the commit.
Fixes: d53dda291bbd ("xfrm: Remove unneeded device check from validate_xmit_xfrm")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Commit 49431af6c4ef incorrectly assumes that the GSO path is only used
by HW offload, but it's also useful for SW crypto.
This patch re-enables GSO for SW crypto. It's not an exact revert to
preserve the other changes made to xfrm_dev_offload_ok afterwards, but
it reverts all of its effects.
Fixes: 49431af6c4ef ("xfrm: rely on XFRM offload")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
|
|
Pull ipmi updates from Corey Minyard:
"Some small fixes for the IPMI driver
Nothing huge, some rate limiting on logs, a strncpy fix where the
source and destination could be the same, and removal of some unused
cruft"
* tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Use dev_warn_ratelimited() for incorrect message warnings
char: ipmi: remove redundant variable 'type' and check
ipmi: Fix strcpy source and destination the same
|
|
Pull rdma fix from Jason Gunthorpe:
"Single fix to correct the iov_iter construction in soft iwarp. This
avoids blktest crashes with recent changes to the allocators"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages
|
|
Pull VFIO updates from Alex Williamson:
- Fix imbalance where the no-iommu/cdev device path skips too much on
open, failing to increment a reference, but still decrements the
reference on close. Add bounds checking to prevent such underflows
(Jacob Pan)
- Fill missing detach_ioas op for pds_vfio_pci, fixing probe failure
when used with IOMMUFD (Brett Creeley)
- Split SR-IOV VFs to separate dev_set, avoiding unnecessary
serialization between VFs that appear on the same bus (Alex
Williamson)
- Fix a theoretical integer overflow is the mlx5-vfio-pci variant
driver (Artem Sadovnikov)
- Implement missing VF token checking support via vfio cdev/IOMMUFD
interface (Jason Gunthorpe)
- Update QAT vfio-pci variant driver to claim latest VF devices
(Małgorzata Mielnik)
- Add a cond_resched() call to avoid holding the CPU too long during
DMA mapping operations (Keith Busch)
* tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio:
vfio/type1: conditional rescheduling while pinning
vfio/qat: add support for intel QAT 6xxx virtual functions
vfio/qat: Remove myself from VFIO QAT PCI driver maintainers
vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD
vfio/mlx5: fix possible overflow in tracking max message size
vfio/pci: Separate SR-IOV VF dev_set
vfio/pds: Fix missing detach_ioas op
vfio: Prevent open_count decrement to negative
vfio: Fix unbalanced vfio_df_close call in no-iommu mode
|
|
Legacy resets reset the memory controllers so VRAM contents
may be unreliable after reset.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit aae94897b6661a2a4b1de2d328090fc388b3e0af)
Cc: stable@vger.kernel.org
|
|
We only need the fw based discovery table for sysfs. No
need to parse it. Additionally parsing some of the board
specific tables may result in incorrect data on some boards.
just load the binary and don't parse it on those boards.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441
Fixes: 80a0e8282933 ("drm/amdgpu/discovery: optionally use fw based ip discovery")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62eedd150fa11aefc2d377fc746633fdb1baeb55)
Cc: stable@vger.kernel.org
|
|
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233)
Cc: stable@vger.kernel.org
|
|
With a timeout of only 1 second, my rx 5700XT fails to initialize,
so this increases the timeout to 2s.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3697
Signed-off-by: Xaver Hugl <xaver.hugl@kde.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9ed3d7bdf2dcdf1a1196630fab89a124526e9cc2)
Cc: stable@vger.kernel.org
|
|
takedown_cpu() has a comment about "all preempt/rcu users must observe
!cpu_active()" which is kind of meaningless in this function. This
comment was originally introduced by commit 6acce3ef8452 ("sched: Remove
get_online_cpus() usage") when _cpu_down() was setting cpu_active_mask
and synchronize_rcu()/synchronize_sched() were added after that.
Later commit 40190a78f85f ("sched/hotplug: Convert cpu_[in]active
notifiers to state machine") added a new CPUHP_AP_ACTIVE hotplug
state to set/clear cpu_active_mask. The following commit b2454caa8977
("sched/hotplug: Move sync_rcu to be with set_cpu_active(false)")
move the synchronize_*() calls to sched_cpu_deactivate() associated
with the new hotplug state, but left the comment behind.
Remove this comment as it is no longer relevant in takedown_cpu().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250729191232.664931-1-longman@redhat.com
|
|
This will allow common helper functions to be created later.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This will be the common location memory caches and pools.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The server will also use this soon, so that we can
split out common helper functions in future.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This will be used in client and server soon
in order to replace smbd_request/smb_direct_sendmsg.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This will allow the client and server specific defines to be
replaced.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This will be used by the server too and will allow us to
create common helper functions.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
