| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since intel_ddi_level() now looks at the buf_trans table there's
no point in having intel_ddi_hdmi_num_entries() around. Just
roll the necessary bits of locic into
intel_ddi_hdmi_level()/intel_ddi_level().
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-8-ville.syrjala@linux.intel.com
|
|
All callers of intel_ddi_level() duplicate the check+WARN
to make sure the returned level is actually present in the
appropriate buf_trans table. Let's push that stuff into
intel_ddi_level() so the callers don't have to worry about it.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-7-ville.syrjala@linux.intel.com
|
|
Convert bxt_ddi_phy_set_signal_levels() to act as the full
.set_signal_levels() hook instead of going through a pointless wrapper.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-6-ville.syrjala@linux.intel.com
|
|
Now that .set_signal_levels() is used for HDMI as well, we can
remove the extra level of indirection and just plug the correct
stuff straight into .set_signal_levels().
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-5-ville.syrjala@linux.intel.com
|
|
Currently .set_signal_levels() is only used by encoders in DP mode.
For most modern platforms there is no essential difference between
DP and HDMI, and both codepaths just end up calling the same function
under the hood. Let's get remove the need for that extra indirection
by moving .set_signal_levels() into the encoder from intel_dp.
Since we already plumb the crtc_state/etc. into .set_signal_levels()
the code will do the right thing for both DP and HDMI.
HSW/BDW/SKL are the only platforms that need a bit of care on
account of having to preload the hardware buf_trans register
with the full set of values. So we must still remember to call
hsw_prepare_{dp,hdmi}_ddi_buffers() to do said preloading, and
.set_signal_levels() will just end up selecting the correct entry
for DP, and also setting up the iboost magic for both DP and HDMI.
Note that previously on HSW/BDW/SKL we did write to DDI_BUF_CTL to
select the correct entry until link training started, now that we
call .set_signal_levels() already from hsw_ddi_pre_enable_dp() that
is no longer the case. But it's all safe now that the
intel_ddi_init_dp_buf_reg() call was hoisted up and it no longer
sets up the DDI_BUF_CTL_ENABLE bit (that is still deferred until
link training).
v2: Rebase due to has_{iboost,buf_trans_select}()
Add some notes about the DDI_BUF_CTL situation on HSW/BDW/SKL (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-4-ville.syrjala@linux.intel.com
|
|
Add a small helper to determine if DDI_BUF_CTL uses the
DDI_BUF_TRANS_SELECT field, and whether we have the
accompanying DDI_BUF_TRANS table in the hardware.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Suck the "do we have iboost?" platform checks into a small helper.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
The DP spec says:
"If the receiver keeps the same value in the ADJUST_REQUEST_LANEx_y
register(s) while the LANEx_CR_DONE bits remain unset, the transmitter
must loop four times with the same voltage swing. On the fifth time,
the transmitter must down-shift to the lower bit rate and must repeat
the CR-lock training sequence as described below."
Lets fix the code to follow that instead of terminating after five
times of transmitting the same signal levels. The text in spec feels
a little bit ambiguous still, but this is my best guess at its meaning.
As a bonus this also gets rid of the train_set[0] stuff which
would not work for per-lane drive settings anyway.
Cc: Imre Deak <imre.deak@intel.com>
CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001160826.17080-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Using the generic extension from the previous patch, a specific multisync
extension enables more than one in/out binary syncobj per job submission.
Arrays of syncobjs are set in struct drm_v3d_multisync, that also cares
of determining the stage for sync (wait deps) according to the job
queue.
v2:
- subclass the generic extension struct (Daniel)
- simplify adding dependency conditions to make understandable (Iago)
v3:
- fix conditions to consider single or multiples in/out_syncs (Iago)
- remove irrelevant comment (Iago)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffd8b2e3dd2e0c686db441a0c0a4a0181ff85328.1633016479.git.mwen@igalia.com
|
|
Add support to attach generic extensions on job submission. This patch
is third prep work to enable multiple syncobjs on job submission. With
this work, when the job submission interface needs to be extended to
accommodate a new feature, we will use a generic extension struct where
an id determines the data type to be pointed. The first application is
to enable multiples in/out syncobj (next patch), but the base is
already done for future features. Therefore, to attach a new feature,
a specific extension struct should subclass drm_v3d_extension and
update the list of extensions in a job submission.
v2:
- remove redundant elements to subclass struct (Daniel)
v3:
- add comment for v3d_get_extensions
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed53b1cd7e3125b76f18fe3fb995a04393639bc6.1633016479.git.mwen@igalia.com
|
|
Move job memory allocation to v3d_job_init function. This aim to facilitate
error handling in job initialization, since cleanup steps are similar for
all (struct v3d_job)-based types of job involved in a command submission.
To generalize v3d_job_init(), this change takes into account that all job
structs have the first element a struct v3d_job (bin, render, tfu, csd) or
it is a v3d_job itself (clean_job) for pointer casting.
v3:
- explicitly init job as NULL (Iago)
- fix pm failure handling on v3_job_init (Iago)
Suggested-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4d12e07bd334d2cddb51cabd359e99edde595619.1633016479.git.mwen@igalia.com
|
|
Prep work to enable a job to wait for more than one syncobj before
start. Also get rid of old checkpatch warnings in the v3d_gem file.
No functional changes.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/825f5fdd540b0aa2eb57bd5ff93c0777808b108c.1633016479.git.mwen@igalia.com
|
|
For controlling the audio SDP split.
Bspec: 63837
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001100316.26441-1-jani.nikula@intel.com
|
|
This was causing infinite recursion on snb/ivb.
Fixes: 5716c8c6f4b6 ("drm/i915/uncore: split the fw get function into separate vfunc")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004003133.2279446-1-airlied@gmail.com
|
|
If we timeout waiting for a CT reply we print very simple error
message. Improve that and by moving error reporting to the caller
we can use CT_ERROR instead of DRM_ERROR and report just fence
as error code will be reported later anyway.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926184545.1407-5-michal.wajdeczko@intel.com
|
|
Instead of plain error value (%d) print more user friendly error
name (%pe).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926184545.1407-4-michal.wajdeczko@intel.com
|
|
Instead of plain error value (%d) print more user friendly error
name (%pe).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926184545.1407-3-michal.wajdeczko@intel.com
|
|
In commit b839a869dfc9 ("drm/i915/guc: Add support for data
reporting in GuC responses") we missed the hypothetical case
that GuC might return positive non-zero value as success data.
While that would be lucky treated as error case, and at the
end will result in reporting valid -EIO, in the meantime this
value will be passed to ERR_PTR that could be misleading.
v2: rebased
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926184545.1407-2-michal.wajdeczko@intel.com
|
|
We assumed that for all modern GENs the PTEs and register space are
split in the GTTMMADR BAR, but while it is true, we should rather use
fixed offset as it is defined in the specification.
Bspec: 4409, 4457, 4604, 11181, 9027, 13246, 13321, 44980
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210926201005.1450-1-michal.wajdeczko@intel.com
|
|
For the brave new world of bridges not creating their own connectors, we
need to implement the max clock limitation via bridge->mode_valid()
instead of connector->mode_valid().
v2: Drop unneeded connector->mode_valid()
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920225801.227211-3-robdclark@gmail.com
|
|
While sanitizing the hardware state we're currently forcing
the pipe bottom color legacy csc/gamma bits on. That is not a
good idea as BIOSen are likely to leave gabage in the LUTs and
so doing this causes ugly visual glitches if and when the
planes covering the background get disabled. This was exactly
the case on this Dell Precision 5560 tgl laptop.
On icl+ we don't normally even use these legacy bits
anymore and instead use their GAMMA_MODE counterparts.
On earlier platforms the bits are used, but we still
shouldn't force them on without knowing what's in the LUT.
So two options, get rid of the whole thing, or do what
intel_color_commit() does to make sure the bottom color state
matches whatever out hardware readout produced. I chose the
latter since it'll match what happens on older platforms when
the primary plane gets turned off. In fact let's just call
intel_color_commit(). It'll also do some CSC programming but
since we don't have readout for that it'll actually just set
to all zeros. So in the unlikely case of CSC actually being
enabld by the BIOS we'll end up with all black until the first
atomic commit happens.
Still not totally sure what we should do about color management
features here in general. Probably the safest thing would be to
force everything off exactly at the same time when we disable
the primary plane as there is no guarantees that whatever the
LUTs/CSCs contain make any sense whatsoever without the
specific pixel data in the BIOS fb. And if we preserve the
primary plane then we should disable the color management
features exactly when the primary plane fb contents first
changes since the new content assumes more or less no
transformations. But of course synchronizing front buffer
rendering with anything else is a bit hard...
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3534
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928185105.3030-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
The previous commits do exactly what this entry in the TODO file asks
for, thus we can remove it now as it is no longer applicable.
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-18-greenfoo@u92.eu
|
|
Functions drm_modeset_lock_all() and drm_modeset_unlock_all() are no
longer used anywhere and can be removed.
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-17-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-16-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-15-greenfoo@u92.eu
|
|
part 2
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
While the previous commit was a simple "search and replace", this time I
had to do a bit of refactoring as only one call to
DRM_MODESET_LOCK_ALL_BEGIN() is allowed inside one same function.
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-14-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-13-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-12-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-11-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-10-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-9-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-8-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-7-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-6-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-5-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-4-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-3-greenfoo@u92.eu
|
|
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924064324.229457-2-greenfoo@u92.eu
|
|
This can be used to create a separate DRM file description, thus
creating a new GEM handle namespace.
My use-case is wlroots. The library splits responsibilities between
separate components: the GBM allocator creates buffers, the GLES2
renderer uses EGL to import them and render to them, the DRM
backend imports the buffers and displays them. wlroots has a
modular architecture, and any of these components can be swapped
and replaced with something else. For instance, the pipeline can
be set up so that the DRM dumb buffer allocator is used instead of
GBM and the Pixman renderer is used instead of GLES2. Library users
can also replace any of these components with their own custom one.
DMA-BUFs are used to pass buffer references across components. We
could use GEM handles instead, but this would result in pain if
multiple GPUs are in use: wlroots copies buffers across GPUs as
needed. Importing a GEM handle created on one GPU into a completely
different GPU will blow up (fail at best, mix unrelated buffers
otherwise).
Everything is fine if all components use Mesa. However, this isn't
always desirable. For instance when running with DRM dumb buffers
and the Pixman software renderer it's unfortunate to depend on GBM
in the DRM backend just to turn DMA-BUFs into FB IDs. GBM loads
Mesa drivers to perform an action which has nothing driver-specific.
Additionally, drivers will fail the import if the 3D engine can't
use the imported buffer, for instance amdgpu will refuse to import
DRM dumb buffers [1]. We might also want to be running with a Vulkan
renderer and a Vulkan allocator in the future, and GBM wouldn't be
welcome in this setup.
To address this, GBM can be side-stepped in the DRM backend, and
can be replaced with drmPrimeFDToHandle calls. However because of
GEM handle reference counting issues, care must be taken to avoid
double-closing the same GEM handle. In particular, it's not
possible to share a DRM FD with GBM or EGL and perform some
drmPrimeFDToHandle calls manually.
So wlroots needs to re-open the DRM FD to create a new GEM handle
namespace. However there's no guarantee that the file-system
permissions will be set up so that the primary FD can be opened
by the compsoitor. On modern systems seatd or logind is a privileged
process responsible for doing this, and other processes aren't
expected to do it. For historical reasons systemd still allows
physically logged in users to open primary DRM nodes, but this
doesn't work on non-systemd setups and it's desirable to lock
them down at some point.
Some might suggest to open the render node instead of re-opening
the primary node. However some systems don't have a render node
at all (e.g. no GPU, or a split render/display SoC).
Solutions to this issue have been discussed in [2]. One solution
would be to open the magic /proc/self/fd/<fd> file, but it's a
Linux-specific hack (wlroots supports BSDs too). Another solution
is to add support for re-opening a DRM primary node to seatd/logind,
but they don't support it now and really haven't been designed for
this (logind would need to grow a completely new API, because it
assumes unique dev_t IDs). Also this seems like pushing down a
kernel limitation to user-space a bit too hard.
Another solution is to allow creating empty DRM leases. The lessee
FD would have its own GEM handle namespace, so wouldn't conflict
wth GBM/EGL. It would have the master bit set, but would be able
to manage zero resources. wlroots doesn't intend to share this FD
with any other process.
All in all IMHO that seems like a pretty reasonable solution to the
issue at hand.
Note, I've discussed with Jonas Ådahl and Mutter plans to adopt a
similar design in the future.
Example usage in wlroots is available at [3]. IGT test available
at [4].
[1]: https://github.com/swaywm/wlroots/issues/2916
[2]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110
[3]: https://github.com/swaywm/wlroots/pull/3158
[4]: https://patchwork.freedesktop.org/series/94323/
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903130000.1590-2-contact@emersion.fr
|
|
Check for the zero length front porch already in intel_mode_valid()
so that we get the same validation for both get_modes() and setcrtc()/etc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930104133.30854-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
"CRTC fixup failed" is probably leftovers from pre-atomic days
when there was an actual fixup() function. Let's unify the debug
messages between encoder vs. crtc compute_config() calls.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930104133.30854-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Unify how we check for -EDEADLK vs. other errors from
crtc vs. encoder compute_config() calls.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930104133.30854-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We may end up in i915_ttm_bo_destroy() in an error path before the
object is fully initialized. In that case it's not correct to call
__i915_gem_free_object(), because that function
a) Assumes the gem object refcount is 0, which it isn't.
b) frees the placements which are owned by the caller until the
init_object() region ops returns successfully. Fix this by providing
a lightweight cleanup function __i915_gem_object_fini() which is also
called by __i915_gem_free_object().
While doing this, also make sure we call dma_resv_fini() as part of
ordinary object destruction and not from the RCU callback that frees
the object. This will help track down bugs where the object is incorrectly
locked from an RCU lookup.
Finally, make sure the object isn't put on the region list until it's
either locked or fully initialized in order to block list processing of
partially initialized objects.
v2:
- The TTM object backend memory was freed before the gem pages were
put. Separate this functionality into __i915_gem_object_pages_fini()
and call it from the TTM delete_mem_notify() callback.
v3:
- Include i915_gem_object_free_mmaps() in __i915_gem_object_pages_fini()
to make sure we don't inadvertedly introduce a race.
Fixes: 48b096126954 ("drm/i915: Move __i915_gem_free_object to ttm_bo_destroy")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20210930113236.583531-1-thomas.hellstrom@linux.intel.com
|
|
Prefer the intel_ types. No functional changes.
v2: Fix build.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210830140222.12228-1-jani.nikula@intel.com
|
|
Failures to register debugfs should be ignored anyway, so stop
propagating errors altogether for clarity and simplicity. No functional
changes.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/346562ccef2282ccdbdea54409fab1d2b48f313c.1630327990.git.jani.nikula@intel.com
|
|
The debugfs file shows it's not capable, don't duplicate the info.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/939453050a5a5175a12a08f16542c1b40bd726dc.1630327990.git.jani.nikula@intel.com
|
|
Prefer i915 over drm pointer.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921110244.8666-1-jani.nikula@intel.com
|
|
Using standard -EAGAIN should be perfectly fine instead of using a
special case value.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930093229.28598-1-jani.nikula@intel.com
|
|
Avoid using the incidental -EPERM.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e2f79220ed2558f615c051e2533275a5dae1a04f.1633000838.git.jani.nikula@intel.com
|
|
Avoid using the incidental -EPERM. Return the -EIO directly from
i915_get_bridge_dev() instead of converting return values later.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ee72c31963d8be98490cd78f7c1182ba4f54c13.1633000838.git.jani.nikula@intel.com
|
