| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") added
checks for page->pfmemalloc to __skb_fill_page_desc():
if (page->pfmemalloc && !page->mapping)
skb->pfmemalloc = true;
It assumes page->mapping == NULL implies that page->pfmemalloc can be
trusted. However, __delete_from_page_cache() can set set page->mapping
to NULL and leave page->index value alone. Due to being in union, a
non-zero page->index will be interpreted as true page->pfmemalloc.
So the assumption is invalid if the networking code can see such a page.
And it seems it can. We have encountered this with a NFS over loopback
setup when such a page is attached to a new skbuf. There is no copying
going on in this case so the page confuses __skb_fill_page_desc which
interprets the index as pfmemalloc flag and the network stack drops
packets that have been allocated using the reserves unless they are to
be queued on sockets handling the swapping which is the case here and
that leads to hangs when the nfs client waits for a response from the
server which has been dropped and thus never arrive.
The struct page is already heavily packed so rather than finding another
hole to put it in, let's do a trick instead. We can reuse the index
again but define it to an impossible value (-1UL). This is the page
index so it should never see the value that large. Replace all direct
users of page->pfmemalloc by page_is_pfmemalloc which will hide this
nastiness from unspoiled eyes.
The information will get lost if somebody wants to use page->index
obviously but that was the case before and the original code expected
that the information should be persisted somewhere else if that is
really needed (e.g. what SLAB and SLUB do).
[akpm@linux-foundation.org: fix blooper in slub]
Fixes: c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.com>
Debugged-by: Jiri Bohac <jbohac@suse.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [3.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for ASPM-related NULL pointer dereference crashes on
Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on
PA-RISC. These are both caused by things we merged in the v4.2 merge
window. Details:
Resource management
- Don't use 64-bit bus addresses on PA-RISC
Miscellaneous
- Tolerate hierarchies with no Root Port"
* tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Don't use 64-bit bus addresses on PA-RISC
PCI: Tolerate hierarchies with no Root Port
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a regression fix at the videobuf2 core driver
- fix error handling at mantis probing code
- revert the IR encode patches, as the API is not mature enough.
So, better to postpone the changes to a latter Kernel
- fix Kconfig breakages on some randconfig scenarios.
* tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] mantis: Fix error handling in mantis_dma_init()
Revert "[media] rc: rc-ir-raw: Add scancode encoder callback"
Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper"
Revert "[media] rc: ir-rc5-decoder: Add encode capability"
Revert "[media] rc: ir-rc6-decoder: Add encode capability"
Revert "[media] rc: rc-core: Add support for encode_wakeup drivers"
Revert "[media] rc: rc-loopback: Add loopback of filter scancodes"
Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback"
[media] vb2: Fix compilation breakage when !CONFIG_BUG
[media] vb2: Only requeue buffers immediately once streaming is started
[media] media/pci/cobalt: fix Kconfig and build when SND is not enabled
[media] media/dvb: fix ts2020.c Kconfig and build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fix from Dmitry Torokhov:
"A small fixup to gpio_keys_polled driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gpio_keys_polled - request GPIO pin as input.
|
|
Pull drm fixes from Dave Airlie:
"A bunch of i915 fixes, one revert a VBT fix that was a bit premature,
and some braswell feature removal that the hw actually didn't support.
One radeon race fix at boot, and one hlcdc build fix, one fix from
Russell that fixes build as well with new audio features.
This is hopefully all I have until -next"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: fix hotplug race at startup
drm/edid: add function to help find SADs
drm/i915: Avoid TP3 on CHV
drm/i915: remove HBR2 from chv supported list
Revert "drm/i915: Add eDP intermediate frequencies for CHV"
Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only
drm/i915: Flag the execlists context object as dirty after every use
|
|
A problem can occur in a statically linked perf when vmlinux can be found:
# perf probe --add sys_epoll_pwait
probe-definition(0): sys_epoll_pwait
symbol:sys_epoll_pwait file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.2.0-rc1+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.2.0-rc1+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_epoll_pwait address found : ffffffff8122bd40
Matched function: SyS_epoll_pwait
Failed to get call frame on 0xffffffff8122bd40
An error occurred in debuginfo analysis (-2).
Error: Failed to add events. Reason: No such file or directory (Code: -2)
The reason is caused by libdw that, if libdw is statically linked, it
can't load libebl_{arch}.so reliable.
In this case it is still possible to get the address from
/proc/kalksyms. However, perf tries that only when libdw returns
-EBADF.
This patch gives it another chance to utilize symbol table, even if
libdw returns an error code other than -EBADF.
After applying this patch:
# perf probe -nv --add sys_epoll_pwait
probe-definition(0): sys_epoll_pwait
symbol:sys_epoll_pwait file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.2.0-rc1+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.2.0-rc1+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_epoll_pwait address found : ffffffff8122bd40
Matched function: SyS_epoll_pwait
Failed to get call frame on 0xffffffff8122bd40
An error occurred in debuginfo analysis (-2).
Trying to use symbols.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Added new event:
Writing event: p:probe/sys_epoll_pwait _text+2276672
probe:sys_epoll_pwait (on sys_epoll_pwait)
You can now use it in all perf tools, such as:
perf record -e probe:sys_epoll_pwait -aR sleep 1
Although libdw returns an error (Failed to get call frame), perf tries
symbol table and finally gets correct address.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440151770-129878-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Map clone was written before we introduced reference counts for
maps and dsos, so all that was needed was just a copy and then we
would insert it into the new map_groups instance.
Fix it by, after copying, initializing the map->refcnt, grabbing
a struct dso refcount and resetting pointers that may be used
to determine if a map, when deleted, is in a rb_tree.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pd4mr80o5b9gvk50iineacec@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a script to produce a call-graph from data exported to a postgresql
database and derived from a processor trace event like intel_pt or intel_bts.
Refer to comments in the scripts call-graph-from-postgresql.py and
export-to-postgresql.py for more details on how to set up the environment,
install the required packages, etc.
Committer note:
From the scripts, for convenience while reading 'git log':
An example of using this script with Intel PT:
$ perf record -e intel_pt//u ls
$ perf script -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py pt_example branches calls
2015-05-29 12:49:23.464364 Creating database...
2015-05-29 12:49:26.281717 Writing to intermediate files...
2015-05-29 12:49:27.190383 Copying to database...
2015-05-29 12:49:28.140451 Removing intermediate files...
2015-05-29 12:49:28.147451 Adding primary keys
2015-05-29 12:49:28.655683 Adding foreign keys
2015-05-29 12:49:29.365350 Done
$ python tools/perf/scripts/python/call-graph-from-postgresql.py pt_example
# The result is a GUI window with a tree representing a context-sensitive
# call-graph. Expanding a couple of levels of the tree and adjusting column
# widths to suit will display something like:
Call Graph: pt_example
Call Path |Object |Count|Time(ns)|Time(%)|Branch Count|Branch Count(%)
v- ls
v- 2638:2638
v- _start ld-2.19.so 1 10074071 100.0 211135 100.0
|- unknown unknown 1 13198 0.1 1 0.0
>- _dl_start ld-2.19.so 1 1400980 13.9 19637 9.3
>- _d_linit_internal ld-2.19.so 1 448152 4.4 11094 5.3
v-__libc_start_main@plt ls 1 8211741 81.5 180397 85.4
>- _dl_fixup ld-2.19.so 1 7607 0.1 108 0.1
>- __cxa_atexit libc-2.19.so 1 11737 0.1 10 0.0
>- __libc_csu_init ls 1 10354 0.1 10 0.0
|- _setjmp libc-2.19.so 1 0 0.0 4 0.0
v- main ls 1 8182043 99.6 180254 99.9
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-11-git-send-email-adrian.hunter@intel.com
[ Added 'python-pyside qt-postgresql' to the yum cmdline installing required packages ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf script, report and inject all have the same itrace options. Put
them into an asciidoc include file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Intel BTS support fits within the new auxtrace infrastructure. Recording is
supporting by identifying the Intel BTS PMU, parsing options and setting up
events.
Decoding is supported by queuing up trace data by thread and then decoding
synchronously delivering synthesized event samples into the session processing
for tools to consume.
Committer note:
E.g:
[root@felicio ~]# perf record --per-thread -e intel_bts// ls
anaconda-ks.cfg apctest.output bin kernel-rt-3.10.0-298.rt56.171.el7.x86_64.rpm libexec lock_page.bpf.c perf.data perf.data.old
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 4.367 MB perf.data ]
[root@felicio ~]# perf evlist -v
intel_bts//: type: 6, size: 112, { sample_period, sample_freq }: 1, sample_type: IP|TID|IDENTIFIER, read_format: ID, disabled: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
dummy:u: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1, sample_type: IP|TID|IDENTIFIER, read_format: ID, disabled: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1
[root@felicio ~]# perf script # the navigate in the pager to some interesting place:
ls 1843 1 branches: ffffffff810a60cb flush_signal_handlers ([kernel.kallsyms]) => ffffffff8121a522 setup_new_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8121a529 setup_new_exec ([kernel.kallsyms]) => ffffffff8122fa30 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fa5d do_close_on_exec ([kernel.kallsyms]) => ffffffff81767ae0 _raw_spin_lock ([kernel.kallsyms])
ls 1843 1 branches: ffffffff81767af4 _raw_spin_lock ([kernel.kallsyms]) => ffffffff8122fa62 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fa8e do_close_on_exec ([kernel.kallsyms]) => ffffffff8122faf0 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122faf7 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fa8b do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fac9 do_close_on_exec ([kernel.kallsyms]) => ffffffff8122fad2 do_close_on_exec ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8122fadd do_close_on_exec ([kernel.kallsyms]) => ffffffff8120fc80 filp_close ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8120fcaf filp_close ([kernel.kallsyms]) => ffffffff8120fcb6 filp_close ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8120fcc2 filp_close ([kernel.kallsyms]) => ffffffff812547f0 dnotify_flush ([kernel.kallsyms])
ls 1843 1 branches: ffffffff81254823 dnotify_flush ([kernel.kallsyms]) => ffffffff8120fcc7 filp_close ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8120fccd filp_close ([kernel.kallsyms]) => ffffffff81261790 locks_remove_posix ([kernel.kallsyms])
ls 1843 1 branches: ffffffff812617a3 locks_remove_posix ([kernel.kallsyms]) => ffffffff812617b9 locks_remove_posix ([kernel.kallsyms])
ls 1843 1 branches: ffffffff812617b9 locks_remove_posix ([kernel.kallsyms]) => ffffffff8120fcd2 filp_close ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8120fcd5 filp_close ([kernel.kallsyms]) => ffffffff812142c0 fput ([kernel.kallsyms])
ls 1843 1 branches: ffffffff812142d6 fput ([kernel.kallsyms]) => ffffffff812142df fput ([kernel.kallsyms])
ls 1843 1 branches: ffffffff8121430c fput ([kernel.kallsyms]) => ffffffff810b6580 task_work_add ([kernel.kallsyms])
ls 1843 1 branches: ffffffff810b65ad task_work_add ([kernel.kallsyms]) => ffffffff810b65b1 task_work_add ([kernel.kallsyms])
ls 1843 1 branches: ffffffff810b65c1 task_work_add ([kernel.kallsyms]) => ffffffff810bc710 kick_process ([kernel.kallsyms])
ls 1843 1 branches: ffffffff810bc725 kick_process ([kernel.kallsyms]) => ffffffff810bc742 kick_process ([kernel.kallsyms])
ls 1843 1 branches: ffffffff810bc742 kick_process ([kernel.kallsyms]) => ffffffff810b65c6 task_work_add ([kernel.kallsyms])
ls 1843 1 branches: ffffffff810b65c9 task_work_add ([kernel.kallsyms]) => ffffffff81214311 fput ([kernel.kallsyms])
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-9-git-send-email-adrian.hunter@intel.com
[ Merged sample->time fix for bug found after first round of testing on slightly older kernel ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Running the following perf-stat command on an arm64 system produces the
following result...
[root@aarch64 ~]# perf stat -e kmem:mm_page_alloc -a sleep 1
Warning: [kmem:mm_page_alloc] function sizeof not defined
Warning: Error: expected type 4 but read 0
Segmentation fault
[root@aarch64 ~]#
The second warning was a result of the first warning not stopping
processing after it detected the issue.
That is, code that found the issue reported the first problem, but
because it did not exit out of the functions smoothly, it caused the
other warning to appear and not only that, it later caused the SIGSEGV.
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150820151632.13927.13791.email-sent-by-dnelson@teal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Events that don't sample the timestamp have a timestamp value of -1.
Intel PT processing wasn't taking that into account.
This is particularly noticeable with Intel BTS because timestamps are
not requested by default.
Then, if the conversion of -1 to TSC results in a small number, the
processing is unaffected.
However if the conversion results in a big number, then the data is
processed prematurely before relevant sideband data like mmap events,
which in turn results in samples with unknown dsos.
Commiter note:
Since BTS wasn't upstream, I split the patch to fold the BTS part with
the patch introducing it, to avoid having this bug in the commit
history. PT was already upstream, so this patch contains that part.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1440060692-5585-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The "/proc/kcore requires CAP_SYS_RAWIO" message comes up all the time
for 'perf script' if vmlinux is not found and the user isn't root, even
when the kernel is not being traced and even though the message is only
really relevant for annotation.
Change it to pr_debug and instead put a note in the message displayed if
annotation is not possible.
Also, the file being accessed might not be /proc/kcore. Tools can be
directed to a different location using the --kallsyms option in which
case kcore is expected to be in the same directory. Adjust the message
so it is not misleading in that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1440065260-8802-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Patch "perf script: Don't assume evsel position of tracking events"
changed 'perf script' to use 'perf_evlist__id2evsel()'. That results
in a segfault if there is more than 1 event and there are
synthesized mmap events e.g.
$ perf record -e cycles,instructions -p$$ sleep 1
$ perf script --show-mmap-events
Segmentation fault (core dumped)
That happens because these synthesized events have an 'id' of zero
which does not match any 'evsel'.
Currently, these synthesized events use the sample type of the first
evsel.
Change 'perf_evlist__id2evsel()' to reflect that which also makes
it consistent with 'perf_evlist__event2evsel()'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 06b234ec26fd ("perf script: Don't assume evsel position of tracking events")
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1440059205-1765-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We apparantly get a hotplug irq before we've initialised
modesetting,
[drm] Loading R100 Microcode
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys
CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111
Hardware name: MicroLink /D850MV , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003
Workqueue: events radeon_hotplug_work_func [radeon]
task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000
EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0
EIP is at __mutex_lock_slowpath+0x23/0x91
EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe
ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0
Stack:
f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca
f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0
c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940
Call Trace:
[<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7
[<c125f162>] ? mutex_lock+0x9/0xa
[<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon]
[<c1034741>] ? process_one_work+0xfc/0x194
[<c1034b58>] ? worker_thread+0x18d/0x218
[<c10349cb>] ? rescuer_thread+0x1d5/0x1d5
[<c103742a>] ? kthread+0x7b/0x80
[<c12601c0>] ? ret_from_kernel_thread+0x20/0x30
[<c10373af>] ? init_completion+0x18/0x18
Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63
Reported-and-Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
On shutdown/reboot of CX20722, first shut down all EAPDs, then
shut down the afg node to D3.
Failure to do so can lead to spurious noises from the internal speaker
directly after reboot (and before the codec is reinitialized again, i e
in BIOS setup or GRUB menus).
BugLink: https://bugs.launchpad.net/bugs/1487345
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch adds native DSD support for the Gustard DAC-X20U.
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The new MSR PMU driver made use of rdtsc() which does not exist (yet) in
this tree:
arch/x86/kernel/cpu/perf_event_msr.c:91:3: error: implicit declaration of function 'rdtsc'
Use the old rdtscll() primitive for now.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
Revert of a VBT parsing commit that should've been queued for drm-next,
not v4.2. The revert unbreaks Braswell among other things.
Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency
support. The code was optimistically added based on incorrect
documentation; the platform does not support them. These are cc: stable.
Finally a gpu state fix from Chris, also cc: stable.
* tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Avoid TP3 on CHV
drm/i915: remove HBR2 from chv supported list
Revert "drm/i915: Add eDP intermediate frequencies for CHV"
Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
drm/i915: Flag the execlists context object as dirty after every use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI backlight code and a memory
leak in the Exynos cpufreq driver.
Specifics:
- Fix a recently introduced issue in the ACPI backlight code which
causes lockdep to complain about a circular lock dependency during
initialization (Hans de Goede).
- Fix a possible memory during initialization in the Exynos cpufreq
driver (Shailendra Verma)"
* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
ACPI / video: Fix circular lock dependency issue in the video-detect code
|
|
* acpi-video:
ACPI / video: Fix circular lock dependency issue in the video-detect code
* cpufreq-fixes:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
|
|
Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t")
caused HPMCs on A500 and hangs on rp5470.
PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so
prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After
3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and
apparently there's some PA-RISC problem related to them.
Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t")
Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Based-on-idea-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
CC: stable@vger.kernel.org # v3.19+
|
|
Commit b253149b843f ("sched/idle/x86: Restore mwait_idle() to fix boot
hangs, to improve power savings and to improve performance") restores
mwait_idle(), but the trace_cpu_idle related calls are missing. This
causes powertop on my old desktop powered by Intel Core2 E6550 to
report zero wakeups and zero events.
Add them back to restore the proper behaviour.
Fixes: b253149b843f ("sched/idle/x86: Restore mwait_idle() to ...")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Cc: <len.brown@intel.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1440046479-4262-1-git-send-email-jszhang@marvell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Pull networking fixes from David Miller:
1) Out of bounds array access in 802.11 minstrel code, from Adrien
Schildknecht.
2) Don't use skb_get() in IGMP/MLD code paths, as this makes
pskb_may_pull() BUG. From Linus Luessing.
3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft.
4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet.
5) Fix ppp device deregistration wrt. netns deletion, from Guillaume
Nault.
6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai
Lau.
7) Fix memory leak in batman-adv code, from Sven Eckelmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
batman-adv: Fix memory leak on tt add with invalid vlan
net: phy: fix semicolon.cocci warnings
net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
be2net: avoid vxlan offloading on multichannel configs
ipv6: Fix a potential deadlock when creating pcpu rt
ipv6: Add rt6_make_pcpu_route()
ipv6: Remove un-used argument from ip6_dst_alloc()
net: phy: workaround for buggy cable detection by LAN8700 after cable plugging
net: ethernet: micrel: fix an error code
ppp: fix device unregistration upon netns deletion
net: phy: fix PHY_RUNNING in phy_state_machine
Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN"
inet: fix potential deadlock in reqsk_queue_unlink()
gianfar: Restore link state settings after MAC reset
ipv4: off-by-one in continuation handling in /proc/net/route
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code
mac80211: fix invalid read in minstrel_sort_best_tp_rates()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen build fix from David Vrabel:
"Fix i386 build with an (uncommon) configuration"
* tag 'for-linus-4.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a small collecton of sound fix patches.
The most significant one is the disablement of newly introduced
topology API. Its ABI couldn't be stabilized enough, so we decided to
delay for 4.3 in the end. Other than that, all oneliner fixes: a
USB-audio runtime PM fix and a couple of HD-audio quirks"
* tag 'sound-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add dock support for Thinkpad W541 (17aa:2211)
ALSA: usb-audio: Fix runtime PM unbalance
ASoC: topology: Disable use from userspace
ASoC: topology: Add Kconfig option for topology
ALSA: hda - Fix the white noise on Dell laptop
|
|
GPIOF_IN flag was lost in:
Commit 633a21d80b4a("input: gpio_keys_polled: Add support for GPIO
descriptors").
Without this flag, legacy code path (for non-descriptor GPIO declarations)
would configure GPIO as output (0 meaning GPIOF_DIR_OUT | GPIOF_INIT_LOW).
Cc: stable@vger.kernel.org
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull SCSI target fixes from Nicholas Bellinger:
"This contains a v4.2-rc specific RCU module unload regression bug-fix,
a long-standing iscsi-target bug-fix for duplicate target_xfer_tags
during NOP processing from Alexei, and two more small REPORT_LUNs
emulation related patches to make Solaris FC host LUN scanning happy
from Roland.
There is also one patch not included that allows target-core to limit
the number of fabric driver SGLs per I/O request using residuals, that
is currently required as a work-around for FC hosts which don't honor
EVPD block-limits settings. At this point, it will most likely become
for-next material"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix handling of small allocation lengths in REPORT LUNS
target: REPORT LUNS should return LUN 0 even for dynamic ACLs
target/iscsi: Fix double free of a TUR followed by a solicited NOPOUT
target: Perform RCU callback barrier before backend/fabric unload
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal fixes from Eduardo Valentin:
"Last minute fixes on the thermal-soc tree. There is a fix of a long
lasting bug in cpu cooling device, thanks for RMK for being pushing
this"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal/cpu_cooling: update policy limits if clipped_freq < policy->max
thermal/cpu_cooling: rename max_freq as clipped_freq in notifier
thermal/cpu_cooling: rename cpufreq_val as clipped_freq
thermal/cpu_cooling: convert 'switch' block to 'if' block in notifier
thermal/cpu_cooling: quit early after updating policy
thermal/cpu_cooling: No need to initialize max_freq to 0
thermal: cpu_cooling: fix lockdep problems in cpu_cooling
thermal: power_allocator: do not use devm* interfaces
|
|
Commit 6dd747825b20 ("ARM: imx: move timer resources into a structure")
moved initialization parameters into a data structure, but neglected to set
the irq field in that data structure for non-DT boots. This causes the system
to hang if a non-DT boot is attempted.
Fixes: 6dd747825b20 ("ARM: imx: move timer resources into a structure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1440066441-13930-1-git-send-email-linux@roeck-us.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Since commit feb44f1f7a4ac299d1ab1c3606860e70b9b89d69 (x86/xen:
Provide a "Xen PV" APIC driver to support >255 VCPUs) Xen guests need
a full APIC driver and thus should depend on X86_LOCAL_APIC.
This fixes an i386 build failure with !SMP && !CONFIG_X86_UP_APIC by
disabling Xen support in this configuration.
Users needing Xen support in a non-SMP i386 kernel will need to enable
CONFIG_X86_UP_APIC.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: <stable@vger.kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Support Intel PT in several tools, enabling the use of the processor trace
feature introduced in Intel Broadwell processors: (Adrian Hunter)
# dmesg | grep Performance
# [0.188477] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
# perf record -e intel_pt//u -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.216 MB perf.data ]
# perf script # then navigate in the tool output to some area, like this one:
184 1030 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba661440 dl_main (/usr/lib64/ld-2.17.so)
185 1457 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba669f10 _dl_new_object (/usr/lib64/ld-2.17.so)
186 9f37 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba677b90 strlen (/usr/lib64/ld-2.17.so)
187 7ba3 strlen (/usr/lib64/ld-2.17.so) => 7f21ba677c75 strlen (/usr/lib64/ld-2.17.so)
188 7c78 strlen (/usr/lib64/ld-2.17.so) => 7f21ba669f3c _dl_new_object (/usr/lib64/ld-2.17.so)
189 9f8a _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba65fab0 calloc@plt (/usr/lib64/ld-2.17.so)
190 fab0 calloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e70 calloc (/usr/lib64/ld-2.17.so)
191 5e87 calloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa90 malloc@plt (/usr/lib64/ld-2.17.so)
192 fa90 malloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e60 malloc (/usr/lib64/ld-2.17.so)
193 5e68 malloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so)
194 fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so) => 7f21ba675d50 __libc_memalign (/usr/lib64/ld-2.17.so)
195 5d63 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e20 __libc_memalign (/usr/lib64/ld-2.17.so)
196 5e40 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675d73 __libc_memalign (/usr/lib64/ld-2.17.so)
197 5d97 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e18 __libc_memalign (/usr/lib64/ld-2.17.so)
198 5e1e __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675df9 __libc_memalign (/usr/lib64/ld-2.17.so)
199 5e10 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba669f8f _dl_new_object (/usr/lib64/ld-2.17.so)
200 9fc2 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba678e70 memcpy (/usr/lib64/ld-2.17.so)
201 8e8c memcpy (/usr/lib64/ld-2.17.so) => 7f21ba678ea0 memcpy (/usr/lib64/ld-2.17.so)
- Fix annotation of vdso (Adrian Hunter)
- Fix DWARF callchains in 'perf script' (Jiri Olsa)
- Fix adding probes in kernel syscalls and listing which variables can be
collected at kernel syscall function lines (Masami Hiramatsu)
Build Fixes:
- Fix 32-bit compilation error in util/annotate.c (Adrian Hunter)
- Support static linking with libdw on Fedora 22 (Andi Kleen)
Infrastructure changes:
- Add a helper function to probe whether cpu-wide tracing is possible (Adrian Hunter)
- Move vfs_getname storage to per thread area in 'perf trace' (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
more changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix buildid processing done at the end of a 'perf record' session, a
problem that happened in workloads involving lots of small short-lived
processes. That code was not asking the perf_session layer to order
the events.
Make the code more robust to handle some of the problems with such
out-of-order events and fix 'perf record' to ask for ordered events
on systems where we have perf_event_attr.sample_id_all. (Adrian Hunter)
- Show backtrace when handling a SIGSEGV in 'perf top --stdio' (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a function to find the start of the SADs in the ELD. This
complements the helper to retrieve the SAD count.
[airlied: this fixes a build problem with the alsa eld helper
which required this].
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://github.com/bbrezillon/linux-at91 into drm-fixes
single atmel hlcdc fix.
* 'drm-atmel-hlcdc-fixes' of https://github.com/bbrezillon/linux-at91:
drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only
|
|
The TI crossbar irqchip doesn't provides any facility to configure the
wakeup sources, but the conversion to hierarchical irqdomains set the
irq_set_wake callback to irq_chip_set_wake_parent. The parent chip
(OMAP wakeupgen) has no irq_set_wake function either so the call will
fail with -ENOSYS. As a result the irq_set_wake() call in the resume
path will trigger an 'Unbalanced wake disable' warning.
Before the conversion the GIC irqchip was the top level irqchip and
correctly flagged with IRQCHIP_SKIP_SET_WAKE.
Restore the correct behaviour by removing the irq_set_type callback
from the crossbar irqchip and set the IRQCHIP_SKIP_SET_WAKE flag which
lets the irq_set_irq_wake() call from the driver succeed.
[ tglx: Massaged changelog ]
Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-7-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The ARM GIC requires that all interrupts which are not used as a
wakeup source have to be masked during suspend.
The conversion of the crossbar irqchip to hierarchical irq domains
failed to mark the crossbar irqchip with the IRQCHIP_MASK_ON_SUSPEND
flag and therefor broke the suspend requirement of the GIC.
Before the conversion the flags were visible because the GIC was the
top level irqchip. After the conversion the crossbar irqchip is the
top level irq chip whose flags are evaluated in suspend_device_irq().
As the flag is not set the masking of the non-wakeup irqs is not
invoked which breaks suspend.
Add the IRQCHIP_MASK_ON_SUSPEND flag to the crossbar irqchip, so the
GIC interrupts get masked properly.
[ tglx: Massaged changelog ]
Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-6-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The conversion of the wakeupgen irqchip to hierarchical irq domains
failed to provide a mechanism to properly set the trigger type of an
interrupt.
The wakeupgen irq chip itself has no mechanism and therefor no
irq_set_type() callback. The code before the conversion relayed the
trigger configuration directly to the underlying GIC.
Restore the correct behaviour by setting the wakeupgen irq_set_type
callback to irq_chip_set_type_parent(). This propagates the
set_trigger() call to the underlying GIC irqchip.
[ tglx: Massaged changelog ]
Fixes: 7136d457f365 ('ARM: omap: convert wakeupgen to stacked domains')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-5-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The conversion of the crossbar irqchip to hierarchical irq domains
failed to provide a mechanism to properly set the trigger type of an
interrupt.
The crossbar irq chip itself has no mechanism and therefor no
irq_set_type() callback. The code before the conversion relayed the
trigger configuration directly to the underlying GIC.
Restore the correct behaviour by setting the crossbar irq_set_type
callback to irq_chip_set_type_parent(). This propagates the
set_trigger() call to the underlying GIC irqchip.
[ tglx: Massaged changelog ]
Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-4-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This helper is required for irq chips which do not implement a
irq_set_type callback and need to call down the irq domain hierarchy
for the actual trigger type change.
This helper is required to fix further wreckage caused by the
conversion of TI OMAP to hierarchical irq domains and therefor tagged
for stable.
[ tglx: Massaged changelog ]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
irq_chip_retrigger_hierarchy() returns -ENOSYS if it was not able to
find at least one .irq_retrigger() callback implemented in the IRQ
domain hierarchy.
That's wrong, because check_irq_resend() expects a 0 return value from
the callback in case that the hardware assisted resend was not
possible. If the return value is non zero the core code assumes
hardware resend success and the software resend is not invoked.
This results in lost interrupts on platforms where none of the parent
irq chips in the hierarchy implements the retrigger callback.
This is observable on TI OMAP, where the hierarchy is:
ARM GIC <- OMAP wakeupgen <- TI Crossbar
Return 0 instead so the software resend mechanism gets invoked.
[ tglx: Massaged changelog ]
Fixes: 85f08c17de26 ('genirq: Introduce helper functions...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-2-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We should not assume any particular hardware topology. Commit d0751b98dfa3
("PCI: Add dev->has_secondary_link to track downstream PCIe links") relied
on the assumption that every PCIe hierarchy is rooted at a Root Port. But
we can't rely on any assumption about what hardware we will find; we just
have to deal with the world as it is.
On some platforms, PCIe devices (endpoints, switch upstream ports, etc.)
appear directly on the root bus, and there is no Root Port in the PCI bus
hierarchy. For example, Meelis observed these top-level devices on a
Sparc V245:
0000:02:00.0 PCI bridge to [bus 03-0d] Switch Upstream Port
0001:02:00.0 PCI bridge to [bus 03] PCIe to PCI/PCI-X Bridge
These devices *look* like they have links going upstream, but there really
are no upstream devices.
In set_pcie_port_type(), we used the parent device to figure out which side
of a switch port has a link, so if the parent device did not exist, we
dereferenced a NULL parent pointer.
Check whether the parent device exists before dereferencing it.
Meelis observed this oops on Sparc V245 and T2000. Ben Herrenschmidt says
this is also possible on IBM PowerVM guests on PowerPC.
[bhelgaas: changelog, comment]
Link: http://lkml.kernel.org/r/alpine.LRH.2.20.1508122118210.18637@math.ut.ee
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
|
|
It was just freezing instead of informing about the SEGV, fix it and
also print a backtrace, just like in the TUI mode and in 'perf trace'.
Tested by provoking a NULL deref when pressing 'z':
0.31% libc-2.20.so [.] malloc_consolidate
0.31% ld-2.20.so [.] _dl_relocate_object
0.28% cc1 [.] ht_lookup
0.28% cc1 [.] ira_init_register_move_cost
perf: Segmentation fault
Obtained 7 stack frames.
perf(dump_stack+0x32) [0x4d69f2]
perf(sighandler_dump_stack+0x29) [0x4d6a89]
/lib64/libc.so.6(+0x34960) [0x7f5064333960]
perf() [0x438790]
/lib64/libpthread.so.0(+0x752a) [0x7f50663dd52a]
/lib64/libc.so.6(clone+0x6d) [0x7f50643ff22d]
#
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pewrpzqd29rgmhu2wkk7fhww@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After recording, 'perf record' post-processes the data to determine
which buildids are needed.
That processing must process the data in time order, if possible,
because otherwise dependent events, like forks and mmaps, will not make
sense.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-4-git-send-email-adrian.hunter@intel.com
[ Moved the sample_id_add to after trying to open the events, use pr_warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When processing a fork event, the tools lookup the parent thread by its
tid. In a couple of cases, it is possible for that thread to have the
wrong pid.
That can happen if the data is being processed out of order, or if the
(fork) event that would have removed the erroneous thread was lost.
Assume the latter case, print a dump message, remove the erroneous
thread, create a new one with the correct pid, and keep going.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Attempting to clone map groups onto themselves will deadlock.
It only happens because of other bugs, but the code should protect
itself anyway.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439994561-27436-2-git-send-email-adrian.hunter@intel.com
[ Use pr_debug() instead of dump_fprintf() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Disable topology support for v4.2
The topology code merged in the v4.2 merge window introduced a new ABI
which was believed to be suitable for use but subsequently additional
work by the developers of this feature have revealed some problems that
need to be addressed. In order to allow this to be done without having
to support the initial ABI add Kconfig to disable the build and also add
some #error statements to the UAPI header so users can't use them.
|
|
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11020/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Tested with W541 and Ultra Dock 170w
Signed-off-by: Rick Sherman <rick@shermdog.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
