summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-26drm/msm: loop over encoders using drm_for_each_encoder()Dmitry Baryshkov2-6/+5
Rather than manually looping over encoders array, use standard drm_for_each_encoder() macro. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/480942/ Link: https://lore.kernel.org/r/20220406101247.483649-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dpu: remove manual destruction of DRM objectsDmitry Baryshkov1-30/+3
Remove manual removal of DRM modesetting objects, it is done anyway by the drm_mode_config_cleanup() called from msm_drm_uninit(). Other MSM display drivers (MDP4, MDP5) do not manually destroy objects and trust generic code to do it's work. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/480943/ Link: https://lore.kernel.org/r/20220406101247.483649-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: properly add and remove internal bridgesDmitry Baryshkov4-0/+13
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by the driver. This fixes the following warning. WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4 DEBUG_LOCKS_WARN_ON(lock->magic != lock) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xc8/0x1e8 __warn from warn_slowpath_fmt+0x78/0xa8 warn_slowpath_fmt from __mutex_lock+0x840/0x9f4 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84 drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c mdp4_kms_init from msm_drm_bind+0x514/0x698 msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8 component_master_add_with_match from msm_pdev_probe+0x274/0x350 msm_pdev_probe from platform_probe+0x5c/0xbc platform_probe from really_probe.part.0+0x9c/0x290 really_probe.part.0 from __driver_probe_device+0xa8/0x13c __driver_probe_device from driver_probe_device+0x34/0x10c driver_probe_device from __driver_attach+0xbc/0x178 __driver_attach from bus_for_each_dev+0x74/0xc0 bus_for_each_dev from bus_add_driver+0x160/0x1e4 bus_add_driver from driver_register+0x88/0x118 driver_register from do_one_initcall+0x6c/0x334 do_one_initcall from kernel_init_freeable+0x1bc/0x220 kernel_init_freeable from kernel_init+0x18/0x12c kernel_init from ret_from_fork+0x14/0x2c Fixes: 3d3f8b1f8b62 ("drm/bridge: make bridge registration independent of drm flow") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/481778/ Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: make mdp5/dpu devices master componentsDmitry Baryshkov7-183/+79
The msm_mdss serves several roles at this moment. It provides IRQ domain used by MDP5 and DPU drivers but it also serves as a component master for both those usecases. MDP4 (which does not have separate MDSS device) is the component master on it's own. Remove this assymmetry and make both MDP5 and DPU component masters too. This removes a need to care about drm/components from msm_mdss driver, removes an mdss pointer from struct msm_drm_private and simplifies the interface between mdp5/dpu and msm_drv. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482512/ Link: https://lore.kernel.org/r/20220419155346.1272627-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: allow compile time selection of driver componentsDmitry Baryshkov6-11/+115
MSM DRM driver already allows one to compile out the DP or DSI support. Add support for disabling other features like MDP4/MDP5/DPU drivers or direct HDMI output support. Suggested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482508/ Link: https://lore.kernel.org/r/20220419155346.1272627-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: stop using device's match data pointerDmitry Baryshkov7-69/+42
Let's make the match's data pointer a (sub-)driver's private data. The only user currently is the msm_drm_init() function, using this data to select kms_init callback. Pass this callback through the driver's private data instead. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482510/ Link: https://lore.kernel.org/r/20220419155346.1272627-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: split the main platform driverDmitry Baryshkov5-205/+288
Currently the msm platform driver is a multiplex handling several cases: - headless GPU-only driver, - MDP4 with flat device nodes, - MDP5/DPU MDSS with all the nodes being children of MDSS node. This results in not-so-perfect code, checking the hardware version (MDP4/MDP5/DPU) in several places, checking for mdss even when it can not exist, etc. Split the code into three handling subdrivers (mdp4, mdss and headless msm). Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482507/ Link: https://lore.kernel.org/r/20220419155346.1272627-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: remove extra indirection for msm_mdssDmitry Baryshkov3-102/+83
Since now there is just one mdss subdriver, drop all the indirection, make msm_mdss struct completely opaque (and defined inside msm_mdss.c) and call mdss functions directly. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482505/ Link: https://lore.kernel.org/r/20220419155346.1272627-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: unify MDSS driversDmitry Baryshkov5-325/+93
MDP5 and DPU1 both provide the driver handling the MDSS region, which handles the irq domain and (incase of DPU1) adds some init for the UBWC controller. Unify those two pieces of code into a common driver. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482506/ Link: https://lore.kernel.org/r/20220419155346.1272627-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-22drm/msm: return the average load over the polling periodChia-I Wu2-1/+62
simple_ondemand interacts poorly with clamp_to_idle. It only looks at the load since the last get_dev_status call, while it should really look at the load over polling_ms. When clamp_to_idle true, it almost always picks the lowest frequency on active because the gpu is idle between msm_devfreq_idle/msm_devfreq_active. This logic could potentially be moved into devfreq core. Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints") Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220416003314.59211-3-olvaffe@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm: simplify gpu_busy callbackChia-I Wu4-34/+41
Move tracking and busy time calculation to msm_devfreq_get_dev_status. Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220416003314.59211-2-olvaffe@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm: remove explicit devfreq status resetChia-I Wu1-7/+0
It is redundant since commit 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints") because dev_pm_qos_update_request triggers get_dev_status. Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220416003314.59211-1-olvaffe@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm: Add a way for userspace to allocate GPU iovaRob Clark6-0/+92
The motivation at this point is mainly native userspace mesa driver in a VM guest. The one remaining synchronous "hotpath" is buffer allocation, because guest needs to wait to know the bo's iova before it can start emitting cmdstream/state that references the new bo. By allocating the iova in the guest userspace, we no longer need to wait for a response from the host, but can just rely on the allocation request being processed before the cmdstream submission. Allocation failures (OoM, etc) would just be treated as context-lost (ie. GL_GUILTY_CONTEXT_RESET) or subsequent allocations (or readpix, etc) can raise GL_OUT_OF_MEMORY. v2: Fix inuse check v3: Change mismatched iova case to -EBUSY Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20220411215849.297838-11-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm/gem: Add fenced vma unpinRob Clark7-17/+66
With userspace allocated iova (next patch), we can have a race condition where userspace observes the fence completion and deletes the vma before retire_submit() gets around to unpinning the vma. To handle this, add a fenced unpin which drops the refcount but tracks the fence, and update msm_gem_vma_inuse() to check any previously unsignaled fences. v2: Fix inuse underflow (duplicate unpin) v3: Fix msm_job_run() vs submit_cleanup() race condition Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220411215849.297838-10-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm/gem: Split vma lookup and pinRob Clark3-42/+44
This way we only lookup vma once per object per submit, for both the submit and retire path. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220411215849.297838-9-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm/gem: Rework vma lookup and pinRob Clark1-24/+26
Combines duplicate vma lookup in the get_and_pin path. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20220411215849.297838-8-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm: Drop msm_gem_iova()Rob Clark3-24/+14
There was only a single user, which could just as easily stash the iova when pinning. v2: fix prepare->prepare->cleanup->cleanup sequences Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220411215849.297838-7-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm/gem: Drop PAGE_SHIFT for address space mmRob Clark4-14/+13
Get rid of all the unnecessary conversion between address/size and page offsets. It just confuses things. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220411215849.297838-6-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm/gem: Split out inuse helperRob Clark3-3/+9
Prep for a following patch, where it gets a bit more complicated. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220411215849.297838-5-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm/gem: Convert some missed GEM_WARN_ON()sRob Clark1-5/+5
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220411215849.297838-4-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm/gpu: Drop duplicate fence counterRob Clark6-10/+9
The ring seqno counter duplicates the fence-context last_fence counter. They end up getting incremented in lock-step, on the same scheduler thread, but the split just makes things less obvious. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220411215849.297838-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm/gem: Move prototypesRob Clark2-23/+22
These belong more cleanly in the gem header. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220411215849.297838-2-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm: Add a way to override processes comm/cmdlineRob Clark5-5/+60
In the cause of using the GPU via virtgpu, the host side process is really a sort of proxy, and not terribly interesting from the PoV of crash/fault logging. Add a way to override these per process so that we can see the guest process's name. v2: Handle kmalloc failure, add comment to explain kstrdup returns NULL if passed NULL [Dan Carpenter] Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220317165144.222101-4-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm: Split out helper to get comm/cmdlineRob Clark1-16/+16
Deduplicate this from fault_worker and recover_worker. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220317165144.222101-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm: Add support for pointer paramsRob Clark6-12/+23
The 64b value field is already suffient to hold a pointer instead of immediate, but we also need a length field. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220317165144.222101-2-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/msm: Remove unused field in submitRob Clark2-1/+1
Noticed this was unused and never set. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220225202614.225197-2-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-22drm/fourcc: Add QCOM tiled modifiersRob Clark1-0/+22
These are mainly used internally in mesa, although I believe the display should be able to scan out the TILED3 format. Currently we define this modifier internally in mesa for use with modifier based allocation. But we can get rid of that hack if we define the modfiers properly. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20210904170603.1739137-1-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-04-11Linux 5.18-rc2v5.18-rc2Linus Torvalds1-1/+1
2022-04-10Merge tag 'tty-5.18-rc2' of ↵Linus Torvalds1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "This is a single serial driver fix for a build issue that showed up due to changes that came in through the tty tree in 5.18-rc1 that were missed previously. It resolves a build error with the mpc52xx_uart driver. It has been in linux-next this week with no reported problems" * tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
2022-04-10Merge tag 'staging-5.18-rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 5.18-rc2 that resolves an endian issue for the r8188eu driver. It has been in linux-next all this week with no reported problems" * tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Fix PPPoE tag insertion on little endian systems
2022-04-10Merge tag 'driver-core-5.18-rc2' of ↵Linus Torvalds4-48/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are two small driver core changes for 5.18-rc2. They are the final bits in the removal of the default_attrs field in struct kobj_type. I had to wait until after 5.18-rc1 for all of the changes to do this came in through different development trees, and then one new user snuck in. So this series has two changes: - removal of the default_attrs field in the powerpc/pseries/vas code. The change has been acked by the PPC maintainers to come through this tree - removal of default_attrs from struct kobj_type now that all in-kernel users are removed. This cleans up the kobject code a little bit and removes some duplicated functionality that confused people (now there is only one way to do default groups) Both of these have been in linux-next for all of this week with no reported problems" * tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: kobj_type: remove default_attrs powerpc/pseries/vas: use default_groups in kobj_type
2022-04-10Merge tag 'char-misc-5.18-rc2' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fix from Greg KH: "A single driver fix. It resolves the build warning issue on 32bit systems in the habannalabs driver that came in during the 5.18-rc1 merge cycle. It has been in linux-next for all this week with no reported problems" * tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Fix test build failures
2022-04-10Merge tag 'powerpc-5.18-2' of ↵Linus Torvalds15-35/+169
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the guest could be lost (or delayed until the next guest exit). - Disable SCV (system call vectored) when PR KVM guests could be run. - Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR guests. - Add a new KVM CAP to indicate if AIL == 3 is supported. - Fix a regression when hotplugging a CPU to a memoryless/cpuless node. - Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which fixes crashes seen due to hardened usercopy. - Revert a change to max_mapnr which broke HIGHMEM. Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin, and Srikar Dronamraju. * tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc: Set max_mapnr correctly" powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h powerpc/numa: Handle partially initialized numa nodes powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3 KVM: PPC: Book3S PR: Disallow AIL != 0 KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled KVM: PPC: Book3S HV P9: Fix "lost kick" race
2022-04-10Merge tag 'irq-urgent-2022-04-10' of ↵Linus Torvalds5-14/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - A fix for a long standing bug in the ARM GICv3 redistributor polling which uses the wrong bit number to test. - Prevent translation of bogus ACPI table entries which map device interrupts into the IPI space on ARM GICs. - Don't write into the pending register of ARM GICV4 before the scan in hardware has completed. - A set of build and correctness fixes for the Qualcomm MPM driver" * tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic, gic-v3: Prevent GSI to SGI translations irqchip/gic-v3: Fix GICR_CTLR.RWP polling irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init() irq/qcom-mpm: Fix build error without MAILBOX
2022-04-10Merge tag 'x86_urgent_for_v5.18_rc2' of ↵Linus Torvalds6-57/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the MSI message data struct definition - Use local labels in the exception table macros to avoid symbol conflicts with clang LTO builds - A couple of fixes to objtool checking of the relatively newly added SLS and IBT code - Rename a local var in the WARN* macro machinery to prevent shadowing * tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msi: Fix msi message data shadow struct x86/extable: Prefer local labels in .set directives x86,bpf: Avoid IBT objtool warning objtool: Fix SLS validation for kcov tail-call replacement objtool: Fix IBT tail-call detection x86/bug: Prevent shadowing in __WARN_FLAGS x86/mm/tlb: Revert retpoline avoidance approach
2022-04-10Merge tag 'perf_urgent_for_v5.18_rc2' of ↵Linus Torvalds7-169/+101
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - A couple of fixes to cgroup-related handling of perf events - A couple of fixes to event encoding on Sapphire Rapids - Pass event caps of inherited events so that perf doesn't fail wrongly at fork() - Add support for a new Raptor Lake CPU * tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Always set cpuctx cgrp when enable cgroup event perf/core: Fix perf_cgroup_switch() perf/core: Use perf_cgroup_info->active to check if cgroup is active perf/core: Don't pass task around when ctx sched in perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids perf/x86/intel: Don't extend the pseudo-encoding to GP counters perf/core: Inherit event_caps perf/x86/uncore: Add Raptor Lake uncore support perf/x86/msr: Add Raptor Lake CPU support perf/x86/cstate: Add Raptor Lake support perf/x86: Add Intel Raptor Lake support
2022-04-10Merge tag 'locking_urgent_for_v5.18_rc2' of ↵Linus Torvalds10-572/+585
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Allow the compiler to optimize away unused percpu accesses and change the local_lock_* macros back to inline functions - A couple of fixes to static call insn patching * tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "mm/page_alloc: mark pagesets as __maybe_unused" Revert "locking/local_lock: Make the empty local_lock_*() function a macro." x86/percpu: Remove volatile from arch_raw_cpu_ptr(). static_call: Remove __DEFINE_STATIC_CALL macro static_call: Properly initialise DEFINE_STATIC_CALL_RET0() static_call: Don't make __static_call_return0 static x86,static_call: Fix __static_call_return0 for i386
2022-04-10Merge tag 'sched_urgent_for_v5.18_rc2' of ↵Linus Torvalds4-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Use the correct static key checking primitive on the IRQ exit path - Two fixes for the new forceidle balancer * tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Fix compile error in dynamic_irqentry_exit_cond_resched() sched: Teach the forced-newidle balancer about CPU affinity limitation. sched/core: Fix forceidle balancing
2022-04-10Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of ↵Linus Torvalds26-71/+234
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the clang command line option probing and remove some options to filter out, fixing the build with the latest clang versions - Fix 'perf bench' futex and epoll benchmarks to deal with machines with more than 1K CPUs - Fix 'perf test tsc' error message when not supported - Remap perf ring buffer if there is no space for event, fixing perf usage in 32-bit ChromeOS - Drop objdump stderr to avoid getting stuck waiting for stdout output in 'perf annotate' - Fix up garbled output by now showing unwind error messages when augmenting frame in best effort mode - Fix perf's libperf_print callback, use the va_args eprintf() variant - Sync vhost and arm64 cputype headers with the kernel sources - Fix 'perf report --mem-mode' with ARM SPE - Add missing external commands ('iiostat', etc) to 'perf --list-cmds' * tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output perf tools: Add external commands to list-cmds perf docs: Add perf-iostat link to manpages perf session: Remap buf if there is no space for event perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K perf tools: Fix perf's libperf_print callback perf: arm-spe: Fix perf report --mem-mode perf unwind: Don't show unwind error messages when augmenting frame pointer stack tools headers arm64: Sync arm64's cputype.h with the kernel sources perf test tsc: Fix error message when not supported perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13 perf python: Fix probing for some clang command line options tools build: Filter out options and warnings not supported by clang tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts tools include UAPI: Sync linux/vhost.h with the kernel sources
2022-04-10Merge tag 'cxl+nvdimm-for-5.18-rc2' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull cxl and nvdimm fixes from Dan Williams: - Fix a compile error in the nvdimm unit tests - Fix a shadowed variable warning in the CXL PCI driver * tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: cxl/pci: Drop shadowed variable tools/testing/nvdimm: Fix security_init() symbol collision
2022-04-10Merge tag 'gpio-fixes-for-v5.18-rc2' of ↵Linus Torvalds2-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix a race condition with consumers accessing the fields of GPIO IRQ chips before they're fully initialized * tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: Restrict usage of GPIO chip irq members before initialization
2022-04-09Merge tag 'irqchip-fixes-5.18-1' of ↵Thomas Gleixner5-14/+37
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix GICv3 polling for RWP in redistributors - Reject ACPI attempts to use SGIs on GIC/GICv3 - Fix unpredictible behaviour when making a VPE non-resident with GICv4 - A couple of fixes for the newly merged qcom-mpm driver Link: https://lore.kernel.org/lkml/20220409094229.267649-1-maz@kernel.org
2022-04-09perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout ↵Ian Rogers1-0/+1
output If objdump writes to stderr it can block waiting for it to be read. As perf doesn't read stderr then progress stops with perf waiting for stdout output. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Denis Nikitin <denik@chromium.org> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lexi Shao <shaolexi@huawei.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: William Cohen <wcohen@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Add external commands to list-cmdsMichael Petlan1-0/+4
The `perf --list-cmds` output prints only internal commands, although there is no reason for that from users' perspective. Adding the external commands to commands array with NULL function pointer allows printing all perf commands while not changing the logic of command handler selection. Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf docs: Add perf-iostat link to manpagesMichael Petlan1-1/+1
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf session: Remap buf if there is no space for eventDenis Nikitin1-3/+12
If a perf event doesn't fit into remaining buffer space return NULL to remap buf and fetch the event again. Keep the logic to error out on inadequate input from fuzzing. This fixes perf failing on ChromeOS (with 32b userspace): $ perf report -v -i perf.data ... prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data? Error: failed to process sample Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Denis Nikitin <denik@chromium.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09Merge tag 'scsi-fixes' of ↵Linus Torvalds42-826/+467
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - add support for new devices (ufs, mvsas) - a major set of fixes in lpfc - get rid of a driver specific ioctl in pcmraid - a major rework of aha152x to get rid of the scsi_pointer. - minor fixes and obvious changes including several spelling updates. * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan scsi: ufs: ufshpb: Fix a NULL check on list iterator scsi: sd: Clean up gendisk if device_add_disk() failed scsi: message: fusion: Remove redundant variable dmp scsi: mvsas: Add PCI ID of RocketRaid 2640 scsi: sd: sd_read_cpr() requires VPD pages scsi: mpt3sas: Fail reset operation if config request timed out scsi: sym53c500_cs: Stop using struct scsi_pointer scsi: ufs: ufs-pci: Add support for Intel MTL scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch" scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch" scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one() scsi: aic7xxx: Use standard PCI subsystem, subdevice defines scsi: ufs: qcom: Drop custom Android boot parameters scsi: core: sysfs: Remove comments that conflict with the actual logic scsi: hisi_sas: Remove stray fallthrough annotation scsi: virtio-scsi: Eliminate anonymous module_init & module_exit scsi: isci: Fix spelling mistake "doesnt" -> "doesn't" ...
2022-04-09perf bench: Fix epoll bench to correct usage of affinity for machines with ↵Athira Rajeev2-12/+38
#CPUs > 1K The 'perf bench epoll' testcase fails on systems with more than 1K CPUs. Testcase: perf bench epoll all Result snippet: <<>> Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs. perf: pthread_create: No such file or directory <<>> In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads from respective bench_epoll_* function. Though the logs shows direct failure from pthread_create, the actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf bench: Fix futex bench to correct usage of affinity for machines with ↵Athira Rajeev5-28/+83
#CPUs > 1K The 'perf bench futex' testcase fails on systems with more than 1K CPUs. Testcase: perf bench futex all Failure snippet: <<>>Running futex/hash benchmark... perf: pthread_create: No such file or directory <<>> All the futex benchmarks (ie hash, lock-api, requeue, wake, wake-parallel), pthread_create is invoked in respective bench_futex_* function. Though the logs shows direct failure from pthread_create, strace logs showed that actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the futex benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Fix perf's libperf_print callbackAdrian Hunter1-1/+1
eprintf() does not expect va_list as the type of the 4th parameter. Use veprintf() because it does. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()") Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-03 01:16:11 +0300