| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On slow machines the SND timestamp sometimes doesn't arrive before
we quit. The test only waits as long as the packet delay, so it's
easy for a race condition to happen.
Double the wait but do a bit of polling, once the SND timestamp
arrives there's no point to wait any longer.
This fixes the "TXTIME abs" failures on debug kernels, like:
Case ICMPv4 - TXTIME abs returned '', expected 'OK'
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240510005705.43069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pointer delcaration was missing the __free(kfree).
Fixes: ff7c7d9f5261 ("virtio_net: Remove command data from control_buf")
Reported-by: Jens Axboe <axboe@kernel.dk>
Closes: https://lore.kernel.org/netdev/0674ca1b-020f-4f93-94d0-104964566e3f@kernel.dk/
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240509183634.143273-1-danielj@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clang build brings a warning:
../drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:133:12: warning:
comparison of distinct pointer types ('typeof (tmo_us) *' (aka 'unsigned
int *') and 'typeof (65535) *' (aka 'int *'))
[-Wcompare-distinct-pointer-types]
133 | tmo_us = min(tmo_us, BNXT_PTP_QTS_MAX_TMO_US);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix it by specifying proper type for BNXT_PTP_QTS_MAX_TMO_US.
Fixes: 7de3c2218eed ("bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240509151833.12579-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/gtp
Pablo neira Ayuso says:
====================
gtp pull request 24-05-07
This v3 includes:
- fix for clang uninitialized variable per Jakub.
- address Smatch and Coccinelle reports per Simon
- remove inline in new IPv6 support per Simon
- fix memleaks in netlink control plane per Simon
-o-
The following patchset contains IPv6 GTP driver support for net-next,
this also includes IPv6 over IPv4 and vice-versa:
Patch #1 removes a unnecessary stack variable initialization in the
socket routine.
Patch #2 deals with GTP extension headers. This variable length extension
header to decapsulate packets accordingly. Otherwise, packets are
dropped when these extension headers are present which breaks
interoperation with other non-Linux based GTP implementations.
Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP
context objects to a union.
Patch #4 adds IPv6 support while retaining backward compatibility.
Three new attributes allows to declare an IPv6 GTP tunnel
GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as
IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this
patch, only IPv6 outer in IPv6 inner is supported.
Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers.
Unlike IPv4, which provides a 1:1 mapping between UE/MS,
IPv6 tunnel encapsulates traffic for /64 address as specified
by 3GPP TS. Patch has been split from Patch #4 to highlight
this behaviour.
Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for
handling to userspace so they are handled as control packets.
Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by
moving IP specific debugging out of the function to build
IPv4 and IPv6 GTP packets.
Patch #8 generalizes TOS/DSCP handling following similar approach as
in the existing iptunnel infrastructure.
Patch #9 adds a helper function to build an IPv4 GTP packet in the outer
header.
Patch #10 adds a helper function to build an IPv6 GTP packet in the outer
header.
Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa.
Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner
IPv4 and IPv6 packets for better UE/MS dual stack integration.
This series integrates with the osmocom.org project CI and TTCN-3 test
infrastructure (Oliver Smith) as well as the userspace libgtpnl library.
Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and
providing feedback through the osmocom.org redmine platform to make this
happen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sven Auhagen reports transaction failures with following error:
./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left
This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.
One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.
Normally this happens from control plane, so this could use GFP_KERNEL
instead. But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).
At this time, .clone callbacks always use GFP_ATOMIC for this reason.
Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.
Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new test script that uses packetdrill tool to exercise conntrack
state machine.
Needs ip/ip6tables and conntrack tool (to check if we have an entry in
the expected state).
Test cases added here cover following scenarios:
1. already-acked (retransmitted) packets are not tagged as INVALID
2. RST packet coming when conntrack is already closing (FIN/CLOSE_WAIT)
transitions conntrack to CLOSE even if the RST is not an exact match
3. RST packets with out-of-window sequence numbers are marked as INVALID
4. SYN+Challenge ACK: check that challenge ack is allowed to pass
5. Old SYN/ACK: check conntrack handles the case where SYN is answered
with SYN/ACK for an old, previous connection attempt
6. Check SYN reception while in ESTABLISHED state generates a challenge
ack, RST response clears 'outdated' state + next SYN retransmit gets
us into 'SYN_RECV' conntrack state.
Tests get run twice, once with ipv4 and once with ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After previous change:
->clone exists: ->dirty is always true
->clone == NULL ->dirty is always false
So remove this flag.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This set type keeps two copies of the sets' content,
priv->match (live version, used to match from packet path)
priv->clone (work-in-progress version of the 'future' priv->match).
All additions and removals are done on priv->clone. When transaction
completes, priv->clone becomes priv->match and a new clone is allocated
for use by next transaction.
Problem is that the cloning requires GFP_KERNEL allocations but we
cannot fail at either commit or abort time.
This patch defers the clone until we get an insertion or removal
request. This allows us to handle OOM situations correctly.
This also allows to remove ->dirty in a followup change:
If ->clone exists, ->dirty is always true
If ->clone is NULL, ->dirty is always false, no elements were added
or removed (except catchall elements which are external to the specific
set backend).
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The helper uses priv->clone unconditionally which will fail once we do
the clone conditionally on first insert or removal.
'nft get element' from userspace needs to use priv->match since this
runs from rcu read side lock section.
Prepare for this by passing the match backend data as argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In IPv6, ipv6_rcv_core will parse the hop-by-hop type extension header and increase skb->transport_header by one extension header length.
But if there are more other extension headers like fragment header at this time, the skb->transport_header points to the second extension header,
not the transport layer header or the first extension header.
This will result in the start and nexthdrp variable not pointing to the same position in ipv6frag_thdr_trunced,
and ipv6_skip_exthdr returning incorrect offset and frag_off.Sometimes,the length of the last sharded packet is smaller than the calculated incorrect offset, resulting in packet loss.
We can use network header to offset and calculate the correct position to solve this problem.
Fixes: 9d9e937b1c8b (ipv6/netfilter: Discard first fragment not including all headers)
Signed-off-by: Gao Xingwang <gaoxingwang1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DCCP is going away soon, and had no twsk_unique() method.
We can directly call tcp_twsk_unique() for TCP sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240507164140.940547-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Applications are sensitive to long network latency, particularly
heartbeat monitoring ones. Longer the tx timeout recovery higher the
risk with such applications on a production machines. This patch
remedies, yet honoring device set tx timeout.
Modify watchdog next timeout to be shorter than the device specified.
Compute the next timeout be equal to device watchdog timeout less the
how long ago queue stop had been done. At next watchdog timeout tx
timeout handler is called into if still in stopped state. Either called
or not called, restore the watchdog timeout back to device specified.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Link: https://lore.kernel.org/r/20240508133617.4424-1-praveen.kannoju@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The btf_features list can be used for pahole v1.26 and later -
it is useful because if a feature is not yet implemented it will
not exit with a failure message. This will allow us to add feature
requests to the pahole options without having to check pahole versions
in future; if the version of pahole supports the feature it will be
added.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240507135514.490467-1-alan.maguire@oracle.com
|
|
Geliang Tang says:
====================
From: Geliang Tang <tanggeliang@kylinos.cn>
This patchset adds post_socket_cb pointer into
struct network_helper_opts to make start_server_addr() helper
more flexible. With these modifications, many duplicate codes
can be dropped.
Patches 1-3 address Martin's comments in the previous series.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The arguments "addr" and "len" of run_test() have dropped. This makes
function get_port() useless. Drop it from test_tcp_check_syncookie_user.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/a9b5c8064ab4cbf0f68886fe0e4706428b8d0d47.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch uses public helper connect_to_fd() exported in network_helpers.h
instead of the local defined function connect_to_server() in
test_tcp_check_syncookie_user.c. This can avoid duplicate code.
Then the arguments "addr" and "len" of run_test() become useless, drop them
too.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/e0ae6b790ac0abc7193aadfb2660c8c9eb0fe1f0.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch uses public helper connect_to_fd() exported in network_helpers.h
instead of the local defined function connect_to_server() in
prog_tests/sockopt_inherit.c. This can avoid duplicate code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/71db79127cc160b0643fd9a12c70ae019ae076a1.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Include network_helpers.h in test_tcp_check_syncookie_user.c, use
public helper start_server_addr() in it instead of the local defined
function start_server(). This can avoid duplicate code.
Add two helpers v6only_true() and v6only_false() to set IPV6_V6ONLY
sockopt to true or false, set them to post_socket_cb pointer of struct
network_helper_opts, and pass it to start_server_setsockopt().
In order to use functions defined in network_helpers.c, Makefile needs
to be updated too.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/e0c5324f5da84f453f47543536e70f126eaa8678.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Include network_helpers.h in prog_tests/sockopt_inherit.c, use public
helper start_server_addr() instead of the local defined function
start_server(). This can avoid duplicate code.
Add a helper custom_cb() to set SOL_CUSTOM sockopt looply, set it to
post_socket_cb pointer of struct network_helper_opts, and pass it to
start_server_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/687af66f743a0bf15cdba372c5f71fe64863219e.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
__start_server() sets SO_REUSPORT through setsockopt() when the parameter
'reuseport' is set. This patch makes it more flexible by adding a function
pointer post_socket_cb into struct network_helper_opts. The
'const struct post_socket_opts *cb_opts' args in the post_socket_cb is
for the future extension.
The 'reuseport' parameter can be dropped.
Now the original start_reuseport_server() can be implemented by setting a
newly defined reuseport_cb() function pointer to post_socket_cb filed of
struct network_helper_opts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/470cb82f209f055fc7fb39c66c6b090b5b7ed2b2.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a simple test for the epoll busy poll ioctls, using the kernel
selftest harness.
This test ensures that the ioctls have the expected return codes and
that the kernel properly gets and sets epoll busy poll parameters.
The test can be expanded in the future to do real busy polling (provided
another machine to act as the client is available).
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240508184008.48264-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Martin KaFai Lau says:
====================
selftests/bpf: Retire bpf_tcp_helpers.h
From: Martin KaFai Lau <martin.lau@kernel.org>
The earlier commit 8e6d9ae2e09f ("selftests/bpf: Use bpf_tracing.h instead of bpf_tcp_helpers.h")
removed the bpf_tcp_helpers.h usages from the non networking tests.
This patch set is a continuation of this effort to retire
the bpf_tcp_helpers.h from the networking tests (mostly tcp-cc related).
The main usage of the bpf_tcp_helpers.h is the partial kernel
socket definitions (e.g. sock, tcp_sock). New fields are kept adding
back to those partial socket definitions while everything is available
in the vmlinux.h. The recent bpf_cc_cubic.c test tried to extend
bpf_tcp_helpers.c but eventually used the vmlinux.h instead. To avoid
this unnecessary detour for new tests and have one consistent way
of using the kernel sockets, this patch set retires the bpf_tcp_helpers.h
usages and consolidates the tests to use vmlinux.h instead.
====================
Link: https://lore.kernel.org/r/20240509175026.3423614-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The previous patches have consolidated the tests to use
bpf_tracing_net.h (i.e. vmlinux.h) instead of bpf_tcp_helpers.h.
This patch can finally retire the bpf_tcp_helpers.h from
the repository.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-11-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The patch removes the remaining bpf_tcp_helpers.h usages in the
non tcp-cc networking tests. It either replaces it with bpf_tracing_net.h
or just removed it because the test is not actually using any
kernel sockets. For the later, the missing macro (mainly SOL_TCP) is
defined locally.
An exception is the test_sock_fields which is testing
the "struct bpf_sock" type instead of the kernel sock type.
Whenever "vmlinux.h" is used instead, it hits a verifier
error on doing arithmetic on the sock_common pointer:
; return !a6[0] && !a6[1] && !a6[2] && a6[3] == bpf_htonl(1); @ test_sock_fields.c:54
21: (61) r2 = *(u32 *)(r1 +28) ; R1_w=sock_common() R2_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
22: (56) if w2 != 0x0 goto pc-6 ; R2_w=0
23: (b7) r3 = 28 ; R3_w=28
24: (bf) r2 = r1 ; R1_w=sock_common() R2_w=sock_common()
25: (0f) r2 += r3
R2 pointer arithmetic on sock_common prohibited
Hence, instead of including bpf_tracing_net.h, the test_sock_fields test
defines a tcp_sock with one lsndtime field in it.
Another highlight is, in sockopt_qos_to_cc.c, the tcp_cc_eq()
is replaced by bpf_strncmp(). tcp_cc_eq() was a workaround
in bpf_tcp_helpers.h before bpf_strncmp had been added.
The SOL_IPV6 addition to bpf_tracing_net.h is needed by the
test_tcpbpf_kern test.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch removed the final few bpf_tcp_helpers.h usages
in some misc bpf tcp-cc tests and replace it with
bpf_tracing_net.h (i.e. vmlinux.h)
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch uses bpf_tracing_net.h (i.e. vmlinux.h) in bpf_dctcp.
This will allow to retire the bpf_tcp_helpers.h and consolidate
tcp-cc tests to vmlinux.h.
It will have a dup on min/max macros with the bpf_cubic. It could
be further refactored in the future.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch uses bpf_tracing_net.h (i.e. vmlinux.h) in bpf_cubic.
This will allow to retire the bpf_tcp_helpers.h and consolidate
tcp-cc tests to vmlinux.h.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The "struct bictcp" and "struct dctcp" are private to the bpf prog
and they are stored in the private buffer in inet_csk(sk)->icsk_ca_priv.
Hence, there is no bpf CO-RE required.
The same struct name exists in the vmlinux.h. To reuse vmlinux.h,
they need to be renamed such that the bpf prog logic will be
immuned from the kernel tcp-cc changes.
This patch adds a "bpf_" prefix to them.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It is needed to remove the BPF_STRUCT_OPS usages from the tcp-cc tests
because it is defined in bpf_tcp_helpers.h which is going to be retired.
While at it, this patch consolidates all tcp-cc struct_ops programs to
use the SEC("struct_ops") + BPF_PROG().
It also removes the unnecessary __always_inline usages from the
tcp-cc tests.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch removes the individual tcp_sk implementations from the
tcp-cc tests. The tcp_sk() implementation from the bpf_tracing_net.h
is reused instead.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a few tcp related helper functions to bpf_tracing_net.h.
They will be useful for both tcp-cc and network tracing related
bpf progs. They have already been in the bpf_tcp_helpers.h. This change
is needed to retire the bpf_tcp_helpers.h and consolidate all tests
to vmlinux.h (i.e. bpf_tracing_net.h).
Some of the helpers (tcp_sk and inet_csk) are also defined in
bpf_cc_cubic.c and they are removed. While at it, remove
the vmlinux.h from bpf_cc_cubic.c. bpf_tracing_net.h (which has
vmlinux.h after this patch) is enough and will be consistent
with the other tcp-cc tests in the later patches.
The other TCP_* macro additions will be needed for the bpf_dctcp
changes in the later patch.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch removes the bpf_tracing_net.h usage from the networking tests,
fib_lookup and test_lwt_redirect. Instead of using the (copied) macro
TC_ACT_SHOT and ETH_HLEN from bpf_tracing_net.h, they can directly
use the ones defined in the network header files under linux/.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509175026.3423614-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and IPsec.
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling
BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during
initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset"
* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
net: hns3: fix kernel crash when devlink reload during initialization
net: hns3: fix port vlan filter not disabled issue
net: hns3: use appropriate barrier function after setting a bit value
net: hns3: release PTP resources if pf initialization failed
net: hns3: change type of numa_node_mask as nodemask_t
net: hns3: direct return when receive a unknown mailbox message
net: hns3: using user configure after hardware reset
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
ipv6: prevent NULL dereference in ip6_output()
hsr: Simplify code for announcing HSR nodes timer setup
ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
rxrpc: Only transmit one ACK per jumbo packet received
rxrpc: Fix congestion control algorithm
selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
ipv6: Fix potential uninit-value access in __ip6_make_skb()
net: phy: marvell-88q2xxx: add support for Rev B1 and B2
appletalk: Improve handling of broadcast packets
...
|
|
Pull ARM fix from Russell King:
- clear stale KASan stack poison when a CPU resumes
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9381/1: kasan: clear stale stack poison
|
|
Pull dentry leak fix from Al Viro:
"Dentry leak fix in the qibfs driver that I forgot to send a pull
request for ;-/
My apologies - it actually sat in vfs.git#fixes for more than two
months..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qibfs: fix dentry leak
|
|
Some l2tp providers will use 1701 as origin port and open several
tunnels for the same origin and target. On the Linux side, this
may mean opening several sockets, but then trafic will go to only
one of them, losing the trafic for the tunnel of the other socket
(or leaving it up to userland, consuming a lot of cpu%).
This can also happen when the l2tp provider uses a cluster, and
load-balancing happens to migrate from one origin IP to another one,
for which a socket was already established. Managing reassigning
tunnels from one socket to another would be very hairy for userland.
Lastly, as documented in l2tpconfig(1), as client it may be necessary
to use 1701 as origin port for odd firewalls reasons, which could
prevent from establishing several tunnels to a l2tp server, for the
same reason: trafic would get only on one of the two sockets.
With the V2 protocol it is however easy to route trafic to the proper
tunnel, by looking up the tunnel number in the network namespace. This
fixes the three cases altogether.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20240506215336.1470009-1-samuel.thibault@ens-lyon.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports.
Modified the mv88e6352_get_port4_serdes_cmode function to pass a port
number since the register set of the 6352 is equal on the 6320/21.
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to
be filled")
Marvell 88e6320/21 switches fail to be probed:
...
mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces
error creating PHYLINK: -22
...
The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities.
Since there are serdes only ports 0/1 included, create a new dedicated
phylink_get_caps for the 6320 and 6321 to properly support their
set of capabilities.
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
====================
Link: https://lore.kernel.org/r/20240507134224.2646246-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
CPU0 CPU1
========================== ===================================
hclgevf_set_timer_task() hclgevf_periodic_service_task()
set_bit(DOWN,state) test_bit(DOWN,state)
pf also has this issue.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool --reset | |
+------------------->| reset command |
| ethtool --reset +-------------------->|
+------------------->| +---+
| +---+ | |
| | |reset currently | | HW RESET
| | |and wait to do | |
| |<--+ | |
| | send pervious cfg |<--+
| | (1000M FULL AN_ON) |
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | reset command |<--+
| +-------------------->|
| | +---+
| | send pervious cfg | | HW RESET
| | (10M HALF AN_OFF) |<--+
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | | |
| | read cfg(time task) |<--+
| | (10M HALF AN_OFF) |
| |<--------------------+
| | |
v v v
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it.
Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com
Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!
We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.
Major changes:
mac80211/cfg80211
* handle color change per link
mt76
* mt7921 LED control
* mt7925 EHT radiotap support
* mt7920e PCI support
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
rtw89
* complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
* use BIOS ACPI settings to set TX power and channels
* disable Wireless Extensios on Wi-Fi 7 devices
iwlwifi
* block_esr debugfs file
* support again firmware API 90 (was reverted earlier)
* provide channel survey information for Automatic Channel Selection (ACS)
* tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (214 commits)
wifi: mwl8k: initialize cmd->addr[] properly
wifi: iwlwifi: Ensure prph_mac dump includes all addresses
wifi: iwlwifi: mvm: don't request statistics in restart
wifi: iwlwifi: mvm: exit EMLSR if secondary link is not used
wifi: iwlwifi: mvm: add beacon template version 14
wifi: iwlwifi: mvm: align UATS naming with firmware
wifi: iwlwifi: Force SCU_ACTIVE for specific platforms
wifi: iwlwifi: mvm: record and return channel survey information
wifi: iwlwifi: mvm: add the firmware API for channel survey
wifi: iwlwifi: mvm: Fix race in scan completion
wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidth
wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasons
wifi: iwlwifi: mvm: Add active EMLSR blocking reasons prints
wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
wifi: iwlwifi: mvm: fix primary link setting
wifi: iwlwifi: mvm: use already determined cmd_id
wifi: iwlwifi: mvm: don't reset link selection during restart
wifi: iwlwifi: Print EMLSR states name
wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active
wifi: iwlwifi: mvm: fix typo in debug print
...
====================
Link: https://lore.kernel.org/r/20240508120726.85A10C113CC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David Wei says:
====================
netdevsim: add NAPI support
Add NAPI support to netdevsim and register its Rx queues with NAPI
instances. Then add a selftest using the new netdev Python selftest
infra to exercise the existing Netdev Netlink API, specifically the
queue-get API.
This expands test coverage and further fleshes out netdevsim as a test
device. It's still my goal to make it useful for testing things like
flow steering and ZC Rx.
====================
Link: https://lore.kernel.org/r/20240507163228.2066817-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
