| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The Realtek RTL8125/RTL8126 NBase-T MAC/PHY chips have internal PHY's
which are register-compatible, at least for the registers we use here.
So let's use just one PHY driver to support all of them.
These internal PHY's exist also as external C45 PHY's, but on the
internal PHY's no access to MMD registers is possible. This can be
used to differentiate between the internal and external version.
As a side effect the drivers for two now external-only drivers don't
require read_mmd/write_mmd hooks any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c57081a6-811f-4571-ab35-34f4ca6de9af@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds support for hardware monitoring to the fbnic driver,
allowing for temperature and voltage sensor data to be exposed to
userspace via the HWMON interface. The driver registers a HWMON device
and provides callbacks for reading sensor data, enabling system
admins to monitor the health and operating conditions of fbnic.
Signed-off-by: Sanman Pradhan <sanmanpradhan@meta.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241014152709.2123811-1-sanman.p211993@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Daniel Zahka says:
====================
ethtool: rss: track rss ctx busy from core
This series prevents deletion of rss contexts that are
in use by ntuple filters from ethtool core.
====================
Link: https://patch.msgid.link/20241011183549.1581021-1-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It should be invalid to delete an rss context while it is being
referenced from an ntuple filter. ethtool core should prevent this
from happening. This patch adds a testcase to verify this behavior.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ntuple filters can specify an rss context to use for packet hashing
and queue selection. When a filter is referencing an rss context, it
should be invalid for that context to be deleted. A list of active
ntuple filters and their associated rss contexts can be compiled by
querying a device's ethtool_ops.get_rxnfc. This patch checks to see if
any ntuple filters are referencing an rss context during context
deletion, and prevents the deletion if the requested context is still
in use.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clear 1000Base-T link partner advertisement bits in Clause-45
read_status() function in case auto-negotiation is disabled or has not
been completed.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9dc9b47b2d675708afef3ad366bfd78eb584d958.1728565530.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Always call rtlgen_read_status() first, so genphy_read_status() which
is called by it clears bits in case auto-negotiation has not completed.
Also clear 10GBT link-partner advertisement bits in case auto-negotiation
is disabled or has not completed.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b15929a41621d215c6b2b57393368086589569ec.1728565530.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The PHYSR MMD register is present and defined equally for all RTL82xx
Ethernet PHYs.
Read duplex and Gbit master bits from rtlgen_decode_speed() and rename
it to rtlgen_decode_physr().
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b9a76341da851a18c985bc4774fa295babec79bb.1728565530.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kuniyuki Iwashima says:
====================
rtnetlink: Use rtnl_register_many().
This series converts all rtnl_register() and rtnl_register_module()
to rtnl_register_many() and finally removes them.
Once this series is applied, I'll start converting doit() to per-netns
RTNL.
v1: https://lore.kernel.org/20241011220550.46040-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20241014201828.91221-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No one uses rtnl_register() and rtnl_register_module().
Let's remove them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-12-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register_module() in favour of rtnl_register_many().
rtnl_register_many() will unwind the previous successful registrations
on failure and simplify module error handling.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-11-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() and rtnl_register_module() in favour
of rtnl_register_many().
When it succeeds for built-in callers, rtnl_register_many() guarantees
all rtnetlink types in the passed array are supported, and there is no
chance that a part of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register_module() in favour of rtnl_register_many().
rtnl_register_many() will unwind the previous successful registrations
on failure and simplify module error handling.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241014201828.91221-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241014201828.91221-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will replace all rtnl_register() and rtnl_register_module() with
rtnl_register_many().
Currently, rtnl_register() returns nothing and prints an error message
when it fails to register a rtnetlink message type and handlers.
The failure happens only when rtnl_register_internal() fails to allocate
rtnl_msg_handlers[protocol][msgtype], but it's unlikely for built-in
callers on boot time.
rtnl_register_many() unwinds the previous successful registrations on
failure and returns an error, but it will be useless for built-in callers,
especially some subsystems that do not have the legacy ioctl() interface
and do not work without rtnetlink.
Instead of booting up without rtnetlink functionality, let's panic on
failure for built-in rtnl_register_many() callers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Harshitha Ramamurthy says:
====================
gve: adopt page pool
This patchset implements page pool support for gve.
The first patch deals with movement of code to make
page pool adoption easier in the next patch. The
second patch adopts the page pool API. The third patch
adds basic per queue stats which includes page pool
allocation failures as well.
====================
Link: https://patch.msgid.link/20241014202108.1051963-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_stats_ops to export basic per-queue stats.
With page pool support for DQO added in the previous patches,
rx-alloc-fail captures failures in page pool allocations as
well since the rx_buf_alloc_fail stat tracked in the driver
is incremented when gve_alloc_buffer returns error.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241014202108.1051963-4-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For DQ queue format in raw DMA addressing(RDA) mode,
implement page pool recycling of buffers by leveraging
a few helper functions.
DQ QPL mode will continue to use the exisiting recycling
logic. This is because in QPL mode, the pages come from a
constant set of pages that the driver pre-allocates and
registers with the device.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241014202108.1051963-3-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for the upcoming page pool adoption for DQO
raw addressing mode, move RX buffer management code to a new
file. In the follow on patches, page pool code will be added
to this file.
No functional change, just movement of code.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241014202108.1051963-2-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ignat Korchagin says:
====================
do not leave dangling sk pointers in pf->create functions
Some protocol family create() implementations have an error path after
allocating the sk object and calling sock_init_data(). sock_init_data()
attaches the allocated sk object to the sock object, provided by the
caller.
If the create() implementation errors out after calling sock_init_data(),
it releases the allocated sk object, but the caller ends up having a
dangling sk pointer in its sock object on return. Subsequent manipulations
on this sock object may try to access the sk pointer, because it is not
NULL thus creating a use-after-free scenario.
We have implemented a stable hotfix in commit 631083143315
("net: explicitly clear the sk pointer, when pf->create fails"), but this
series aims to fix it properly by going through each of the pf->create()
implementations and making sure they all don't return a sock object with
a dangling pointer on error.
====================
Link: https://patch.msgid.link/20241014153808.51894-1-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 6cd4a78d962bebbaf8beb7d2ead3f34120e3f7b2.
inet/inet6->create() implementations have been fixed to explicitly NULL the
allocated sk object on error.
A warning was put in place to make sure any future changes will not leave
a dangling pointer in pf->create() implementations.
So this code is now redundant.
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-10-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All pf->create implementations have been fixed now to clear sock->sk on
error, when they deallocate the allocated sk object.
Put a warning in place to make sure we don't break this promise in the
future.
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-9-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-8-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.
Clear the sk pointer in the sock object on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-7-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock_init_data() attaches the allocated sk object to the provided sock
object. If ieee802154_create() fails later, the allocated sk object is
freed, but the dangling pointer remains in the provided sock object, which
may allow use-after-free.
Clear the sk pointer in the sock object on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-6-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On error can_create() frees the allocated sk object, but sock_init_data()
has already attached it to the provided sock object. This will leave a
dangling sk pointer in the sock object and may cause use-after-free later.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20241014153808.51894-5-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bt_sock_alloc() attaches allocated sk object to the provided sock object.
If rfcomm_dlc_alloc() fails, we release the sk object, but leave the
dangling pointer in the sock object, which may cause use-after-free.
Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-4-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
l2cap_sock_create()
bt_sock_alloc() allocates the sk object and attaches it to the provided
sock object. On error l2cap_sock_alloc() frees the sk object, but the
dangling pointer is still attached to the sock object, which may create
use-after-free in other code.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-3-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After sock_init_data() the allocated sk object is attached to the provided
sock object. On error, packet_create() frees the sk object leaving the
dangling pointer in the sock object on return. Some other code may try
to use this pointer and cause use-after-free.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-2-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The subsequent calculation of port_rate = speed * 1000 * BYTES_PER_KBIT,
where the BYTES_PER_KBIT is of type LL, may cause an overflow.
At least when speed = SPEED_20000, the expression to the left of port_rate
will be greater than INT_MAX.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Elena Salomatkina <esalomatkina@ispras.ru>
Link: https://patch.msgid.link/20241013124529.1043-1-esalomatkina@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 1202cdd66531 ("Remove DECnet support from kernel"),
NEIGH_DN_TABLE is no longer used.
MPLS has implicit dependency on it in nla_put_via(), but nla_get_via()
does not support DECnet.
Let's remove NEIGH_DN_TABLE.
Now, neigh_tables[] has only 2 elements and no extra iteration
for DECnet in many places.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241014235216.10785-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb3_alloc_stid() and cxgb3_free_stid() have been unused since
commit 30e0f6cf5acb ("RDMA/iw_cxgb3: Remove the iw_cxgb3 module
from kernel")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241013012946.284721-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dr. David Alan Gilbert says:
====================
cxgb4: Deadcode removal
This is a bunch of deadcode removal in cxgb4.
It's all complete function removal rather than any actual change to
logic.
Build and boot tested, but I don't have the hardware to test
the actual card.
====================
Link: https://patch.msgid.link/20241013203831.88051-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t4_free_ofld_rxqs() has been unused since
commit 0fbc81b3ad51 ("chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources
dynamically for all cxgb4 ULD's")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-7-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_l2t_alloc_switching() has been unused since it was added in
commit f7502659cec8 ("cxgb4: Add API to alloc l2t entry; also update
existing ones")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-6-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_iscsi_init() has been unused since 2016's commit
5999299f1ce9 ("cxgb3i,cxgb4i,libcxgbi: remove iSCSI DDP support")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-5-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_get_srq_entry() has been unused since 2018's commit
e47094751ddc ("cxgb4: Add support to initialise/read SRQ entries")
which added it.
Remove it.
Note: I'm a bit suspicious whether any of the srq code in there
actually does anything useful; without this get I can't see anything
that reads the data, so perhaps the whole thing should go?
But that however would remove one of the opcode handlers, and I have
no way to test that.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_alloc_raw_mac_filt() and cxgb4_free_raw_mac_filt() have been
unused since they were added in 2019 commit
5fab51581f62 ("cxgb4: Add MPS TCAM refcounting for raw mac filters")
Remove them.
This was also the last use of cxgb4_mps_ref_dec().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-3-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxgb4_alloc_encap_mac_filt() and cxgb4_free_encap_mac_filt() have been
unused since
commit 28b3870578ef ("cxgb4: Re-work the logic for mps refcounting")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241013203831.88051-2-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon Horman says:
====================
net: ethernet: freescale: Use %pa to format resource_size_t
This short series addersses the formatting of variables of
type resource_size_t in freescale drivers.
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
These problems were introduced by
commit 9d9326d3bc0e ("phy: Change mii_bus id field to a string")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
====================
Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-0-dcc9afb8858b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
Introduced by commit 9d9326d3bc0e ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c: In function 'fs_mii_bitbang_init':
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:126:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
126 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-2-dcc9afb8858b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The correct format string for resource_size_t is %pa which
acts on the address of the variable to be formatted [1].
[1] https://elixir.bootlin.com/linux/v6.11.3/source/Documentation/core-api/printk-formats.rst#L229
Introduced by commit 9d9326d3bc0e ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c: In function 'mpc52xx_fec_mdio_probe':
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c:97:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
97 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-1-dcc9afb8858b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon Horman says:
====================
net: String format safety updates
This series addresses string format safety issues that are
flagged by tooling in files touched by recent patches.
I do not believe that any of these issues are bugs.
Rather, I am providing these updates as I think there is a value
in addressing such warnings so real problems stand out.
v1: https://lore.kernel.org/20241011-string-thing-v1-0-acc506568033@kernel.org
====================
Link: https://patch.msgid.link/20241014-string-thing-v2-0-b9b29625060a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently I noticed that both gcc-14 and clang-18 report that passing
a non-string literal as the format argument of clkdev_create()
is potentially insecure.
E.g. clang-18 says:
.../txgbe_phy.c:582:35: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
581 | clock = clkdev_create(clk, NULL, clk_name);
| ^~~~~~~~
.../txgbe_phy.c:582:35: note: treat the string as an argument to avoid this
581 | clock = clkdev_create(clk, NULL, clk_name);
| ^
| "%s",
It is always the case where the contents of clk_name is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
However, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241014-string-thing-v2-2-b9b29625060a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prior to this patch ksz_ptp_msg_irq_setup() uses snprintf() to copy
strings. It does so by passing strings as the format argument of
snprintf(). This appears to be safe, due to the absence of format
specifiers in the strings, which are declared within the same function.
But nonetheless GCC 14 warns about it:
.../ksz_ptp.c:1109:55: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
1109 | snprintf(ptpmsg_irq->name, sizeof(ptpmsg_irq->name), name[n]);
| ^~~~~~~
.../ksz_ptp.c:1109:55: note: treat the string as an argument to avoid this
1109 | snprintf(ptpmsg_irq->name, sizeof(ptpmsg_irq->name), name[n]);
| ^
| "%s",
As what we are really dealing with here is a string copy, it seems make
sense to use a function designed for this purpose. In this case null
padding is not required, so strscpy is appropriate. And as the
destination is an array of fixed size, the 2-argument variant may be used.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241014-string-thing-v2-1-b9b29625060a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
