| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 056bce63c469 ("bnxt_en: Make PTP TX timestamp HWRM query silent")
changed a netdev_err() to netdev_WARN_ONCE().
netdev_WARN_ONCE() is it generates a kernel WARNING, which is bad, for
the following reasons:
* You do not a kernel warning if the firmware queries are late
* In busy networks, timestamp query failures fairly regularly
* A WARNING message doesn't bring much value, since the code path
is clear.
(This was discussed in-depth in [1])
Transform the netdev_WARN_ONCE() into a netdev_warn_once(), and print a
more well-behaved message, instead of a full WARN().
bnxt_en 0000:67:00.0 eth0: TS query for TX timer failed rc = fffffff5
[1] Link: https://lore.kernel.org/all/ZbDj%2FFI4EJezcfd1@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Fixes: 056bce63c469 ("bnxt_en: Make PTP TX timestamp HWRM query silent")
Link: https://lore.kernel.org/r/20240125134104.2045573-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The logic to determine if SMC-D link group matches is incorrect. The
correct logic should be that it only returns true when the GID is the
same, and the SMC-D device is the same and the extended GID is the same
(in the case of virtual ISM).
It can be fixed by adding brackets around the conditional (or ternary)
operator expression. But for better readability and maintainability, it
has been changed to an if-else statement.
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Closes: https://lore.kernel.org/r/13579588-eb9d-4626-a063-c0b77ed80f11@linux.ibm.com
Fixes: b40584d14570 ("net/smc: compatible with 128-bits extended GID of virtual ISM device")
Link: https://lore.kernel.org/r/13579588-eb9d-4626-a063-c0b77ed80f11@linux.ibm.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125123916.77928-1-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Lots going on for rc2, ivpu has a bunch of stabilisation and debugging
work, then amdgpu and xe are the main fixes. i915, exynos have a few,
then some misc panel and bridge fixes.
Worth mentioning are three regressions. One of the nouveau fixes in
6.7 for a serious deadlock had side effects, so I guess we will bring
back the deadlock until I can figure out what should be done properly.
There was a scheduler regression vs amdgpu which was reported in a few
places and is now fixed. There was an i915 vs simpledrm problem
resulting in black screens, that is reverted also.
I'll be working on a proper nouveau fix, it kinda looks like one of
those cases where someone tried to use an atomic where they should
have probably used a lock, but I'll see.
fb:
- fix simpledrm/i915 regression by reverting change
scheduler:
- fix regression affecting amdgpu users due to sched draining
nouveau:
- revert 6.7 deadlock fix as it has side effects
dp:
- fix documentation warning
ttm:
- fix dummy page read on some platforms
bridge:
- anx7625 suspend fix
- sii902x: fix probing and audio registration
- parade-ps8640: fix suspend of bridge, aux fixes
- samsung-dsim: avoid using FORCE_STOP_STATE
panel:
- simple add missing bus flags
- fix samsung-s6d7aa0 flags
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
i915:
- DSI sequence revert to fix GitLab #10071 and DP test-pattern fix
- Drop -Wstringop-overflow (broken on GCC11)
ivpu:
- fix recovery/reset support
- improve submit ioctl stability
- fix dev open/close races on unbind
- PLL disable reset fix
- deprecate context priority param
- improve debug buffer logging
- disable buffer sharing across VPU contexts
- free buffer sgt on unbind
- fix missing lock around shmem vmap
- add better boot diagnostics
- add more debug prints around mapping
- dump MMU events in case of timeout
v3d:
- NULL ptr dereference fix
exynos:
- fix stack usage
- fix incorrect type
- fix dt typo
- fix gsc runtime resume
xe:
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests"
* tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm: (66 commits)
Revert "nouveau: push event block/allowing out of the fence context"
drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE
drm/sched: Drain all entities in DRM sched run job worker
drm/amd/display: "Enable IPS by default"
drm/amd: Add a DC debug mask for IPS
drm/amd/display: Disable ips before dc interrupt setting
drm/amd/display: Replay + IPS + ABM in Full Screen VPB
drm/amd/display: Add IPS checks before dcn register access
drm/amd/display: Add Replay IPS register for DMUB command table
drm/amd/display: Allow IPS2 during Replay
drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs
drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs
drm/amd/amdgpu: Assign GART pages to AMD device mapping
drm/amd/pm: Fetch current power limit from FW
drm/amdgpu: Fix null pointer dereference
drm/amdgpu: Show vram vendor only if available
drm/amd/pm: update the power cap setting
drm/amdgpu: Avoid fetching vram vendor information
drm/amdgpu/pm: Fix the power source flag error
drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic update from Arnd Bergmann:
"Just one patch this time, adding Andreas Larsson as co-maintainer for
arch/sparc. He is volunteering to help since David Miller has become
much less active over the past few years.
In turn, I'm helping Andreas get set up as a new maintainer, starting
with the entry in the MAINTAINERS file"
* tag 'asm-generic-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
MAINTAINERS: Add Andreas Larsson as co-maintainer for arch/sparc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC fixes from Arnd Bergmann:
"There are a couple of devicetree fixes for samsung, riscv/sophgo, and
for TPM device nodes on a couple of platforms.
Both the Arm FF-A and the SCMI firmware drivers get a number of code
fixes, addressing minor implementation bugs and compatibility with
firmware implementations. Most of these bugs relate to the usage of
xarray and rwlock structures and are fixed by Cristian Marussi"
* tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint format
arm64: dts: Fix TPM schema violations
ARM: dts: Fix TPM schema violations
ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
arm64: dts: exynos: gs101: comply with the new cmu_misc clock names
firmware: arm_ffa: Handle partitions setup failures
firmware: arm_ffa: Use xa_insert() and check for result
firmware: arm_ffa: Simplify ffa_partitions_cleanup()
firmware: arm_ffa: Check xa_load() return value
firmware: arm_ffa: Add missing rwlock_init() for the driver partition
firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions()
firmware: arm_scmi: Fix the clock protocol supported version
firmware: arm_scmi: Fix the clock protocol version for v3.2
firmware: arm_scmi: Use xa_insert() when saving raw queues
firmware: arm_scmi: Use xa_insert() to store opps
firmware: arm_scmi: Replace asm-generic/bug.h with linux/bug.h
firmware: arm_scmi: Check mailbox/SMT channel for consistency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"As well as a few device IDs and the usual scattering of driver
specific fixes this contains a couple of core things.
One is a missed case in error handling, the other patch is a change
from me raising the number of chip selects allowed by the newly added
multi chip select support patches to resolve problems seen on several
systems that exceeded the limit.
This is not a real solution to the issue but rather just a change to
avoid disruption to users, one of the options I am considering is just
sending a revert of those changes if we can't come up with something
sensible"
* tag 'spi-fix-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix finalize message on error return
spi: cs42l43: Handle error from devm_pm_runtime_enable
spi: Raise limit on number of chip selects
spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
spi: spi-cadence: Reverse the order of interleaved write and read operations
spi: spi-imx: Use dev_err_probe for failed DMA channel requests
spi: bcm-qspi: fix SFDP BFPT read by usig mspi read
spi: intel-pci: Add support for Arrow Lake SPI serial flash
spi: intel-pci: Remove Meteor Lake-S SoC PCI ID from the list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- add a quirk to GPIO ACPI handling to ignore touchpad wakeups on GPD
G1619-04
- clear interrupt status bits (that may have been set before enabling
the interrupts) after setting the interrupt type in gpio-eic-sprd
* tag 'gpio-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: eic-sprd: Clear interrupt after set the interrupt type
gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-04
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- remove K3 DT prefix from wave5
- vb2 core: fix missing caps on VIDIO_CREATE_BUFS under certain
circumstances
- videobuf2: Stop direct calls to queue num_buffers field
* tag 'media/v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vb2: refactor setting flags and caps, fix missing cap
media: media videobuf2: Stop direct calls to queue num_buffers field
media: chips-media: wave5: Remove K3 References
dt-bindings: media: Remove K3 Family Prefix from Compatible
|
|
Fix register_snapshot_trigger() to return error code if it failed to
allocate a snapshot instead of 0 (success). Unless that, it will register
snapshot trigger without an error.
Link: https://lore.kernel.org/linux-trace-kernel/170622977792.270660.2789298642759362200.stgit@devnote2
Fixes: 0bbe7f719985 ("tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation")
Cc: stable@vger.kernel.org
Cc: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The big_tcp test-case requires a few kernel knobs currently
not specified in the net selftests config, causing the
following failure:
# selftests: net: big_tcp.sh
# Error: Failed to load TC action module.
# We have an error talking to the kernel
...
# Testing for BIG TCP:
# CLI GSO | GW GRO | GW GSO | SER GRO
# ./big_tcp.sh: line 107: test: !=: unary operator expected
...
# on on on on : [FAIL_on_link1]
Add the missing configs
Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/all/21630ecea872fea13f071342ac64ef52a991a9b5.1706282943.git.pabeni@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add touch screen info for TECLAST X16 Plus tablet.
Signed-off-by: Phoenix Chen <asbeltogf@gmail.com>
Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Missing release_firmware() due to error handling blocked any future image
loading.
Fix the return code and release_fiwmare() to release the bad image.
Fixes: 25a76dbb36dd ("platform/x86/intel/ifs: Validate image size")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-2-ashok.raj@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
amd_pmf_get_pb_data() will allocate memory for the policy buffer,
but does not free it if copy_from_user() fails. This leads to a memory
leak.
Fixes: 10817f28e533 ("platform/x86/amd/pmf: Add capability to sideload of policy binary")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Link: https://lore.kernel.org/r/20240124012939.6550-1-liucong2@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
AMD SFH driver has APIs defined to export the ambient light information;
use this within the PMF driver to send inputs to the PMF TA, so that PMF
driver can enact to the actions coming from the TA.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240123141458.3715211-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
AMD SFH driver has APIs defined to export the human presence information;
use this within the PMF driver to send inputs to the PMF TA, so that PMF
driver can enact to the actions coming from the TA.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240123141458.3715211-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There are no break lines in the test log for test_verifier #106 ~ #111
if jit is disabled, add the missing line break at the end of printf()
to fix it.
Without this patch:
[root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
[root@linux bpf]# ./test_verifier 106
#106/p inline simple bpf_loop call SKIP (requires BPF JIT)Summary: 0 PASSED, 1 SKIPPED, 0 FAILED
With this patch:
[root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
[root@linux bpf]# ./test_verifier 106
#106/p inline simple bpf_loop call SKIP (requires BPF JIT)
Summary: 0 PASSED, 1 SKIPPED, 0 FAILED
Fixes: 0b50478fd877 ("selftests/bpf: Skip callback tests if jit is disabled in test_verifier")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240126015736.655-1-yangtiezhu@loongson.cn
|
|
Merge cpufreq fixes for 6.8-rc2:
- Fix the handling of scaling_max/min_freq sysfs attributes in the AMD
P-state cpufreq driver (Mario Limonciello).
- Make the intel_pstate cpufreq driver avoid unnecessary computation of
the HWP performance level corresponding to a given frequency in the
cases when it is known already, which also helps to avoid reducing
the maximum CPU capacity artificially on some systems (Rafael J.
Wysocki).
* pm-cpufreq:
cpufreq/amd-pstate: Fix setting scaling max/min freq values
cpufreq: intel_pstate: Refine computation of P-state for given frequency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One regression fixup to samsung-dsim.c module
- The FORCE_STOP_STATE bit is ineffective for forcing DSI link into LP-11 mode,
causing timing issues and potential bridge failures.
This patch reverts previous commits and corrects this issue.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126141130.15512-1-inki.dae@samsung.com
|
|
Clarify definitions of several instructions:
* BPF_NEG does not support BPF_X
* BPF_CALL does not support BPF_JMP32 or BPF_X
* BPF_EXIT does not support BPF_X
* BPF_JA does not support BPF_X (was implied but not explicitly stated)
Also fix a typo in the wide instruction figure where the field is
actually named "opcode" not "code".
Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240126040050.8464-1-dthaler1968@gmail.com
|
|
This reverts commit eacabb5462717a52fccbbbba458365a4f5e61f35.
This commit causes some regressions in desktop usage, this will
reintroduce the original deadlock in DRI_PRIME situations, I've
got an idea to fix it by offloading to a workqueue in a different
spot, however this code has a race condition where we sometimes
miss interrupts so I'd like to fix that as well.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- PSR fix for HSW
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZbPGBL9lj4DxxIW1@jlahtine-mobl.ger.corp.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Plenty of ivpu fixes to improve the general stability and debugging, a
suspend fix for the anx7625 bridge, a revert to fix an initialization
order bug between i915 and simpledrm and a documentation warning fix for
dp_mst.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tp77e5fokigup6cgmpq6mtg46kzdw2dpze6smpnwfoml4kmwpq@bo6mbkezpkle
|
|
A while back the I2C HID implementation was split in an ACPI and OF
part, but the new OF driver never initialises the client pointer which
is dereferenced on power-up failures.
Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
Cc: stable@vger.kernel.org # 5.12
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Dave has not been very active on arch/sparc for the past two years.
I have been contributing to the SPARC32 port as well as maintaining
out-of-tree SPARC32 patches for LEON3/4/5 (SPARCv8 with CAS support)
since 2012. I am willing to step up as an arch/sparc (co-)maintainer.
For recent discussions on the matter, see [1] and [2].
[1] https://lore.kernel.org/r/20230713075235.2164609-1-u.kleine-koenig@pengutronix.de
[2] https://lore.kernel.org/r/20231209105816.GA1085691@ravnborg.org/
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11
mode. It seems the bridge internally queues DSI packets and when the
FORCE_STOP_STATE bit is cleared, they are sent in close succession
without any useful timing (this also means that the DSI lanes won't go
into LP-11 mode). The length of this gibberish varies between 1ms and
5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this
case). In our case, the bridge will fail in about 1 per 500 reboots.
The FORCE_STOP_STATE handling was introduced to have the DSI lanes in
LP-11 state during the .pre_enable phase. But as it turns out, none of
this is needed at all. Between samsung_dsim_init() and
samsung_dsim_set_display_enable() the lanes are already in LP-11 mode.
The code as it was before commit 20c827683de0 ("drm: bridge:
samsung-dsim: Fix init during host transfer") and 0c14d3130654 ("drm:
bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct
in this regard.
This patch basically reverts both commits. It was tested on an i.MX8M
SoC with an SN65DSI84 bridge. The signals were probed and the DSI
packets were decoded during initialization and link start-up. After this
patch the first DSI packet on the link is a VSYNC packet and the timing
is correct.
Command mode between .pre_enable and .enable was also briefly tested by
a quick hack. There was no DSI link partner which would have responded,
but it was made sure the DSI packet was send on the link. As a side
note, the command mode seems to just work in HS mode. I couldn't find
that the bridge will handle commands in LP mode.
Fixes: 20c827683de0 ("drm: bridge: samsung-dsim: Fix init during host transfer")
Fixes: 0c14d3130654 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113164344.1612602-1-mwalle@kernel.org
|
|
Change the timer layout in the dtb to fit the format that needed by
the SBI.
Fixes: 967a94a92aaa ("riscv: dts: add initial Sophgo SG2042 SoC device tree")
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
I encountered a race issue after lengthy (~594647 secs) stress tests on
a 64k-page arm64 VM with several 4k-block EROFS images. The timing
is like below:
z_erofs_try_inplace_io z_erofs_fill_bio_vec
cmpxchg(&compressed_bvecs[].page,
NULL, ..)
[access bufvec]
compressed_bvecs[] = *bvec;
Previously, z_erofs_submit_queue() just accessed bufvec->page only, so
other fields in bufvec didn't matter. After the subpage block support
is landed, .offset and .end can be used too, but filling bufvec isn't
an atomic operation which can cause inconsistency.
Let's use a spinlock to keep the atomicity of each bufvec. More
specifically, just reuse the existing spinlock `pcl->obj.lockref.lock`
since it's rarely used (also it takes a short time if even used) as long
as the pcluster has a reference.
Fixes: 192351616a9d ("erofs: support I/O submission for sub-page compressed blocks")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Link: https://lore.kernel.org/r/20240125120039.3228103-1-hsiangkao@linux.alibaba.com
|
|
Lantiq uses a common kernel config for devices with 24Kc and 34Kc cores.
The changes made previously to add support for interrupts on all cores
work on 24Kc platforms with SMP disabled and 34Kc platforms with SMP
enabled. This patch fixes boot issues on Danube (single core 24Kc) with
SMP enabled.
Fixes: 730320fd770d ("MIPS: lantiq: enable all hardware interrupts on second VPE")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 61167ad5fecd("mm: pass nid to reserve_bootmem_region()") reveals
that reserved memblock regions have no valid node id set, just set it
right since loongson64 firmware makes it clear in memory layout info.
This works around booting failure on 3A1000+ since commit 61167ad5fecd
("mm: pass nid to reserve_bootmem_region()") under
CONFIG_DEFERRED_STRUCT_PAGE_INIT.
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
"cpu_probe" is called both by BP and APs, but reserving exception vector
(like 0x0-0x1000) called by "cpu_probe" need once and calling on APs is
too late since memblock is unavailable at that time.
So, reserve exception vector ONLY by BP.
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Most of the symbols for which we do not have a prototype can actually be
made static and for the few that cannot, there is already a declaration
in a header for it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The addition of commit efa7df3e3bb5 ("mm: align larger anonymous mappings
on THP boundaries") caused the "virtual_address_range" mm selftest to
start failing on arm64. Let's fix that regression.
There were 2 visible problems when running the test; 1) it takes much
longer to execute, and 2) the test fails. Both are related:
The (first part of the) test allocates as many 1GB anonymous blocks as it
can in the low 256TB of address space, passing NULL as the addr hint to
mmap. Before the faulty patch, all allocations were abutted and contained
in a single, merged VMA. However, after this patch, each allocation is in
its own VMA, and there is a 2M gap between each VMA. This causes the 2
problems in the test: 1) mmap becomes MUCH slower because there are so
many VMAs to check to find a new 1G gap. 2) mmap fails once it hits the
VMA limit (/proc/sys/vm/max_map_count). Hitting this limit then causes a
subsequent calloc() to fail, which causes the test to fail.
The problem is that arm64 (unlike x86) selects
ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT. But __thp_get_unmapped_area()
allocates len+2M then always aligns to the bottom of the discovered gap.
That causes the 2M hole.
Fix this by detecting cases where we can still achive the alignment goal
when moved to the top of the allocated area, if configured to prefer
top-down allocation.
While we are at it, fix thp_get_unmapped_area's use of pgoff, which should
always be zero for anonymous mappings. Prior to the faulty change, while
it was possible for user space to pass in pgoff!=0, the old
mm->get_unmapped_area() handler would not use it. thp_get_unmapped_area()
does use it, so let's explicitly zero it before calling the handler. This
should also be the correct behavior for arches that define their own
get_unmapped_area() handler.
Link: https://lkml.kernel.org/r/20240123171420.3970220-1-ryan.roberts@arm.com
Fixes: efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries")
Closes: https://lore.kernel.org/linux-mm/1e8f5ac7-54ce-433a-ae53-81522b2320e1@arm.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ahash_alg->setkey is updated to ahash_nosetkey in ahash.c
so checking setkey() function to determine hmac algorithm is not valid.
to fix this added is_hmac variable in structure caam_hash_alg to determine
whether the algorithm is hmac or not.
Fixes: 2f1f34c1bf7b ("crypto: ahash - optimize performance when wrapping shash")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The commit "crypto: qat - generate dynamically arbiter mappings"
introduced a regression on qat_402xx devices.
This is reported when the driver probes the device, as indicated by
the following error messages:
4xxx 0000:0b:00.0: enabling device (0140 -> 0142)
4xxx 0000:0b:00.0: Generate of the thread to arbiter map failed
4xxx 0000:0b:00.0: Direct firmware load for qat_402xx_mmp.bin failed with error -2
The root cause of this issue was the omission of a necessary function
pointer required by the mapping algorithm during the implementation.
Fix it by adding the missing function pointer.
Fixes: 5da6a2d5353e ("crypto: qat - generate dynamically arbiter mappings")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The stubs for kvm_own/lsx()/kvm_own_lasx() when CONFIG_CPU_HAS_LSX or
CONFIG_CPU_HAS_LASX is not defined should have a return value since they
return an int, so add "return -EINVAL;" to the stubs.
Fixes the build error:
In file included from ../arch/loongarch/include/asm/kvm_csr.h:12,
from ../arch/loongarch/kvm/interrupt.c:8:
../arch/loongarch/include/asm/kvm_vcpu.h: In function 'kvm_own_lasx':
../arch/loongarch/include/asm/kvm_vcpu.h:73:39: error: no return statement in function returning non-void [-Werror=return-type]
73 | static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { }
Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support")
Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit 8569992d64b8f750e34b7858eac ("KVM: Use gfn instead of hva for
mmu_notifier_retry") replaces mmu_invalidate_retry_hva() usage with
mmu_invalidate_retry_gfn() for X86, LoongArch also need similar changes
to fix build.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Machines which have more than 8 nodes fail to boot SMP after commit
a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting()
earlier"). Because such machines use tlb-based per-cpu base address
rather than dmw-based per-cpu base address, resulting per-cpu variables
can only be accessed after tlb_init(). But rcutree_report_cpu_starting()
is now called before tlb_init() and accesses per-cpu variables indeed.
Since the original patch want to avoid the lockdep warning caused by
page allocation in tlb_init(), we can move rcutree_report_cpu_starting()
to tlb_init() where after tlb exception configuration but before page
allocation.
Fixes: a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting() earlier")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries") caused two issues [1] [2] reported on 32 bit system or compat
userspace.
It doesn't make too much sense to force huge page alignment on 32 bit
system due to the constrained virtual address space.
[1] https://lore.kernel.org/linux-mm/d0a136a0-4a31-46bc-adf4-2db109a61672@kernel.org/
[2] https://lore.kernel.org/linux-mm/CAJuCfpHXLdQy1a2B6xN2d7quTYwg2OoZseYPZTRpU0eHHKD-sQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240118180505.2914778-1-shy828301@gmail.com
Fixes: efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Christopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In mfill_atomic_hugetlb(), mmap_changing isn't being checked
again if we drop mmap_lock and reacquire it. When the lock is not held,
mmap_changing could have been incremented. This is also inconsistent
with the behavior in mfill_atomic().
Link: https://lkml.kernel.org/r/20240117223729.1444522-1-lokeshgidra@google.com
Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races")
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ksm_tests was previously mmapping a region of memory, aligning the
returned pointer to a PMD boundary, then setting MADV_HUGEPAGE, but was
setting it past the end of the mmapped area due to not taking the pointer
alignment into consideration. Fix this behaviour.
Up until commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries"), this buggy behavior was (usually) masked because the
alignment difference was always less than PMD-size. But since the
mentioned commit, `ksm_tests -H -s 100` started failing.
Link: https://lkml.kernel.org/r/20240122120554.3108022-1-ryan.roberts@arm.com
Fixes: 325254899684 ("selftests: vm: add KSM huge pages merging time test")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The shadow call stack implementation fails to build without CONFIG_MMU:
ld.lld: error: undefined symbol: vfree_atomic
>>> referenced by scs.c
>>> kernel/scs.o:(scs_free) in archive vmlinux.a
Link: https://lkml.kernel.org/r/20240122175204.2371009-1-samuel.holland@sifive.com
Fixes: a2abe7cbd8fe ("scs: switch to vmapped shadow stacks")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The correct folio replacement for "set_page_dirty()" is
"folio_mark_dirty()", not "folio_set_dirty()". Using the latter won't
properly inform the FS using the dirty_folio() callback.
This has been found by code inspection, but likely this can result in some
real trouble when zapping dirty PTEs that point at clean pagecache folios.
Yuezhang Mo said: "Without this fix, testing the latest exfat with
xfstests, test cases generic/029 and generic/030 will fail."
Link: https://lkml.kernel.org/r/20240122171751.272074-1-david@redhat.com
Fixes: c46265030b0f ("mm/memory: page_remove_rmap() -> folio_remove_rmap_pte()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lkml.kernel.org/r/2445cedb-61fb-422c-8bfb-caf0a2beed62@arm.com
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The correct folio replacement for "set_page_dirty()" is
"folio_mark_dirty()", not "folio_set_dirty()". Using the latter won't
properly inform the FS using the dirty_folio() callback.
This has been found by code inspection, but likely this can result in some
real trouble.
Link: https://lkml.kernel.org/r/20240122175407.307992-1-david@redhat.com
Fixes: a8e61d584eda0 ("mm/huge_memory: page_remove_rmap() -> folio_remove_rmap_pmd()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order for the page table level 5 to be in use, the CPU must have the
setting enabled in addition to the CONFIG option. Check for the flag to be
set to avoid false test failures on systems that do not have this cpu flag
set.
The test does a series of mmap calls including three using the
MAP_FIXED flag and specifying an address that is 1<<47 or 1<<48. These
addresses are only available if you are using level 5 page tables,
which requires both the CPU to have the capabiltiy (la57 flag) and the
kernel to be configured. Currently the test only checks for the kernel
configuration option, so this test can still report a false positive.
Here are the three failing lines:
$ ./va_high_addr_switch | grep FAILED
mmap(ADDR_SWITCH_HINT, 2 * PAGE_SIZE, MAP_FIXED): 0xffffffffffffffff - FAILED
mmap(HIGH_ADDR, MAP_FIXED): 0xffffffffffffffff - FAILED
mmap(ADDR_SWITCH_HINT, 2 * PAGE_SIZE, MAP_FIXED): 0xffffffffffffffff - FAILED
I thought (for about a second) refactoring the test so that these three
mmap calls will only be run on systems with the level 5 page tables
available, but the whole point of the test is to check the level 5
feature...
Link: https://lkml.kernel.org/r/20240119205801.62769-1-audra@redhat.com
Fixes: 4f2930c6718a ("selftests/vm: only run 128TBswitch with 5-level paging")
Signed-off-by: Audra Mitchell <audra@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Adam Sindelar <adam@wowsignal.io>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On systems with 64k page size and 512M huge page sizes, the allocation and
test succeeds but errors out at the munmap. As the comment states, munmap
will failure if its not HUGEPAGE aligned. This is due to the length of
the mapping being 1/2 the size of the hugepage causing the munmap to not
be hugepage aligned. Fix this by making the mapping length the full
hugepage if the hugepage is larger than the length of the mapping.
Link: https://lkml.kernel.org/r/20240119131429.172448-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Donet Tom <donettom@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As discussed on the mailing list [1], merge the zpool maintainers entry
into the zswap one. Also, add CREDITS entries for previous zswap/zpool
maintainers.
[1] https://lore.kernel.org/linux-mm/CAJD7tkYx4YWhGoVwnSeGc8dY_1aRRxxg8PzWBV==A6iqG_OgFw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240117182152.1439822-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Seth Jennings <sjenning@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With the introduction of the pool_rwlock (reader-writer lock), several
fast paths end up taking the pool_rwlock as readers. Furthermore,
stack_depot_put() unconditionally takes the pool_rwlock as a writer.
Despite allowing readers to make forward-progress concurrently,
reader-writer locks have inherent cache contention issues, which does not
scale well on systems with large CPU counts.
Rework the synchronization story of stack depot to again avoid taking any
locks in the fast paths. This is done by relying on RCU-protected list
traversal, and the NMI-safe subset of RCU to delay reuse of freed stack
records. See code comments for more details.
Along with the performance issues, this also fixes incorrect nesting of
rwlock within a raw_spinlock, given that stack depot should still be
usable from anywhere:
| [ BUG: Invalid wait context ]
| -----------------------------
| swapper/0/1 is trying to lock:
| ffffffff89869be8 (pool_rwlock){..--}-{3:3}, at: stack_depot_save_flags
| other info that might help us debug this:
| context-{5:5}
| 2 locks held by swapper/0/1:
| #0: ffffffff89632440 (rcu_read_lock){....}-{1:3}, at: __queue_work
| #1: ffff888100092018 (&pool->lock){-.-.}-{2:2}, at: __queue_work <-- raw_spin_lock
Stack depot usage stats are similar to the previous version after a KASAN
kernel boot:
$ cat /sys/kernel/debug/stackdepot/stats
pools: 838
allocations: 29865
frees: 6604
in_use: 23261
freelist_size: 1879
The number of pools is the same as previously. The freelist size is
minimally larger, but this may also be due to variance across system
boots. This shows that even though we do not eagerly wait for the next
RCU grace period (such as with synchronize_rcu() or call_rcu()) after
freeing a stack record - requiring depot_pop_free() to "poll" if an entry
may be used - new allocations are very likely to happen in later RCU grace
periods.
Link: https://lkml.kernel.org/r/20240118110216.2539519-2-elver@google.com
Fixes: 108be8def46e ("lib/stackdepot: allow users to evict stack traces")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a few basic stats counters for stack depot that can be used to derive
if stack depot is working as intended. This is a snapshot of the new
stats after booting a system with a KASAN-enabled kernel:
$ cat /sys/kernel/debug/stackdepot/stats
pools: 838
allocations: 29861
frees: 6561
in_use: 23300
freelist_size: 1840
Generally, "pools" should be well below the max; once the system is
booted, "in_use" should remain relatively steady.
Link: https://lkml.kernel.org/r/20240118110216.2539519-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Alexander Potapenko writes in [1]: "For every memory access in the code
instrumented by KMSAN we call kmsan_get_metadata() to obtain the metadata
for the memory being accessed. For virtual memory the metadata pointers
are stored in the corresponding `struct page`, therefore we need to call
virt_to_page() to get them.
According to the comment in arch/x86/include/asm/page.h,
virt_to_page(kaddr) returns a valid pointer iff virt_addr_valid(kaddr) is
true, so KMSAN needs to call virt_addr_valid() as well.
To avoid recursion, kmsan_get_metadata() must not call instrumented code,
therefore ./arch/x86/include/asm/kmsan.h forks parts of
arch/x86/mm/physaddr.c to check whether a virtual address is valid or not.
But the introduction of rcu_read_lock() to pfn_valid() added instrumented
RCU API calls to virt_to_page_or_null(), which is called by
kmsan_get_metadata(), so there is an infinite recursion now. I do not
think it is correct to stop that recursion by doing
kmsan_enter_runtime()/kmsan_exit_runtime() in kmsan_get_metadata(): that
would prevent instrumented functions called from within the runtime from
tracking the shadow values, which might introduce false positives."
Fix the issue by switching pfn_valid() to the _sched() variant of
rcu_read_lock/unlock(), which does not require calling into RCU. Given
the critical section in pfn_valid() is very small, this is a reasonable
trade-off (with preemptible RCU).
KMSAN further needs to be careful to suppress calls into the scheduler,
which would be another source of recursion. This can be done by wrapping
the call to pfn_valid() into preempt_disable/enable_no_resched(). The
downside is that this sacrifices breaking scheduling guarantees; however,
a kernel compiled with KMSAN has already given up any performance
guarantees due to being heavily instrumented.
Note, KMSAN code already disables tracing via Makefile, and since mmzone.h
is included, it is not necessary to use the notrace variant, which is
generally preferred in all other cases.
Link: https://lkml.kernel.org/r/20240115184430.2710652-1-glider@google.com [1]
Link: https://lkml.kernel.org/r/20240118110022.2538350-1-elver@google.com
Fixes: 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot+93a9e8a3dea8d6085e12@syzkaller.appspotmail.com
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
(struct dirty_throttle_control *)->thresh is an unsigned long, but is
passed as the u32 divisor argument to div_u64(). On architectures where
unsigned long is 64 bytes, the argument will be implicitly truncated.
Use div64_u64() instead of div_u64() so that the value used in the "is
this a safe division" check is the same as the divisor.
Also, remove redundant cast of the numerator to u64, as that should happen
implicitly.
This would be difficult to exploit in memcg domain, given the ratio-based
arithmetic domain_drity_limits() uses, but is much easier in global
writeback domain with a BDI_CAP_STRICTLIMIT-backing device, using e.g.
vm.dirty_bytes=(1<<32)*PAGE_SIZE so that dtc->thresh == (1<<32)
Link: https://lkml.kernel.org/r/20240118181954.1415197-1-zokeefe@google.com
Fixes: f6789593d5ce ("mm/page-writeback.c: fix divide by zero in bdi_dirty_limits()")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Cc: Maxim Patlasov <MPatlasov@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
