summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-15Input: wm831x-ts - ensure the controller is in a known state on openMark Brown1-1/+3
Explicitly set all the enable bits when opening the device just in case something left the device in an unexpected state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14Input: add Atmel AT42QT1070 keypad driverBo Shen3-0/+287
The AT42QT1070 QTouch sensor supports up to 7 keys. The driver has been tested on Atmel AT91SAM9M10-G45-EK board, and it should work fine on other platforms. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: wm831x-ts - default pressure measurements onMark Brown1-1/+4
tslib expects pressure measurements so enable them by default for better compatibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: bcm5974 - add support for MacBookPro8Andy Botting4-0/+35
This patch add multitouch support for the MacBookPro8,1 and MacBookPro8,2 models. Cc: stable@kernel.org Signed-off-by: Andy Botting <andy@andybotting.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: wacom - support 2FGT in MT formatPing Cheng2-18/+53
Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: wacom - support one finger touch the touchscreen wayPing Cheng2-90/+50
There are two types of 1FGT devices supported in wacom_wac.c. Changing them to follow the existing touchscreen format, i.e., only report BTN_TOUCH as a valid tool type. Touch data will be ignored if pen is in proximity. This requires a touch up event sent if touch was down when pen comes in. The touch up event should be sent before any pen events are emitted. Otherwise, two pointers would race for the cursor. However, we can not send a touch up inside wacom_tpc_pen since pen and touch are on different logical port. That is why we have to check if touch is up before sending pen events. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: wacom - process pen data in its own routinePing Cheng1-33/+40
So it would be easier for patch reviewers to follow the data path. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: wacom - do not send 2FGT Tablet PC events in TAP formatPing Cheng2-79/+10
2FGT Tablet PC touch events were processed in _TAP_ format. Remove them so we can change to _MT_ format. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-25Input: atmel_mxt_ts - remove matrix size checkIiro Valkonen1-73/+0
The mxt_check_matrix_size() is currently setting the CTE mode to match xline/yline information that is in the platform data, but it does not take into account for example the fact that we could have a key array in use too (key array would use some x/y lines as well). It would be better to simply rely on the configuration data, and make sure that the CTE mode set in there matches the touch object (touchscreen, key array, proximity) configuration (which are set in the config data too). Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-24Input: mcs_touchkey - add shutdown handlerHeungJun Kim1-0/+9
The MCS50XX series has a HW bug that requires explicit chip power down. If chip is not powered down before shutting the system down the control pins (powerup, interrupt) are pulled up and residue current continues flowing into the chips making them continue consuming power. Signed-off-by: Heungjun Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-24Input: mcs_touchkey - add support for suspend/resumeHeungjun Kim2-1/+48
This adds support for system-level suspend/resume to the driver. Signed-off-by: Heungjun Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-24Input: omap4-keypad - wire up runtime PM handlingAbraham Arce1-19/+55
Enable Runtime PM functionality in OMAP4 driver based on the following assumptions: - keyboard controller in wakeup domain so it is always on and power impact is minimal; - in OMAP4 the device control is at module/device level and ick/fclk level control is difficult so cutting of clocks will prevent interrupts. Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: uinput - reversed test in uinput_setup_device()Dan Carpenter1-1/+1
The test here is reversed. It should be if (IS_ERR()) instead of if (!IS_ERR()). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - allow board code to specify IRQ flagsIiro Valkonen3-3/+7
Different board have different requirements/setups so let's be more flexible. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - allow board code to suppliy controller configIiro Valkonen2-135/+18
As there is no common configuration settings that would work in every situation, remove the fixed config data from driver code and add config data to platform data. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - add mXT224 identifier to id_tableChris Leech1-0/+1
"mXT224" is used in the Intel mid firmware in SFI tables to identify the presence of this I2C device. Signed-off-by: Chris Leech <christopher.leech@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: synaptics_i2c - convert to dev_pm_opsMark Brown1-7/+9
There is a general move to convert drivers to dev_pm_ops rather than bus specific PM ops in order to facilitate core development. Do this converison for synaptics-i2c. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: adxl34x - fix references to adx134xMark Brown1-2/+2
The adxl34x SPI driver has what appears to be a typo referring to the device as adx134x with the numeral 1 rather than letter l. This appears to be an error so convert. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: adxl34x-spi - convert to dev_pm_opsMark Brown1-7/+9
There is a general move to convert drivers to use dev_pm_ops rather than bus specific ones in order to facilitate core development. Do this conversion for adxl34x-spi. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: adxl34x-i2c - convert to dev_pm_opsMark Brown1-7/+9
There is a general move to convert drivers to use dev_pm_ops rather than bus specific ones in order to facilitate core development. Do this conversion for adxl34x-i2c. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: max7359 - convert to dev_pm_opsMark Brown1-7/+10
There is a general move to convert drivers to use dev_pm_ops rather than bus specific ops to facilitate core work. Do this conversion for max7359. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: lm8323 - convert to dev_pm_opsMark Brown1-7/+8
There is a general move away from bus specific PM operations to using dev_pm_ops in order to facilicate core improvements. Update lm8323 to the new model. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: ad714x-spi - convert to dev_pm_opsMark Brown1-9/+8
There is a general move to convert drivers to use dev_pm_ops rather than bus specific PM operations in order to facilitate core work. Do this conversion for ad714x-spi. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: ad714x-i2c - convert to dev_pm_opsMark Brown1-9/+8
There is a general move to convert drivers to use dev_pm_ops rather than bus specific PM operations in order to facilitate core work. Do this conversion for ad714x-i2c. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: uinput - use memdup_user() and friendsDmitry Torokhov1-25/+10
Instead of open-coding copying of data structures from userspace use memdup_user() and strndup_user(). Note that this introduces change in behavior because driver used to truncate 'phys' longer than 1024 bytes, but now it will refuse to set 'phys' that long. Arguably trying to set such 'phys' is suspect anyways. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: uinput - fix setting up device nameDavid Herrmann1-7/+6
The check for non-empty device name was botched since we tried to account for extra space for the terminating zero at the same time. Convert to kstrndup() to avoid this problem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Aristeu Rozanski <aris@ruivo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - read whole message to make CHG lowIiro Valkonen1-3/+3
Read the whole message, as reading just the first byte isn't always guaranteed to clear the message. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - get rid of qt602240 prefixes in namesIiro Valkonen3-480/+481
Change prefixes from qt602240 to mxt to reflect that the driver supports whole line of mXT touchscreens. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: qt602240_ts - rename to atmel_mxt_tsDmitry Torokhov5-15/+15
Since the driver will be supporting whole range of Atmels mXT touchscreen controllers we better rename it to atmel_mxt_ts. Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-01Input: input-polldev - fix a couple of typosDmitry Torokhov2-4/+4
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-01Input: switch completely over to the new versions of get/setkeycodeDmitry Torokhov7-67/+20
All users of old style get/setkeycode methids have been converted so it is time to retire them. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-01Input: dvb-usb-remote - convert to new style of get/setkeycodeDmitry Torokhov1-43/+70
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-01Merge commit 'v2.6.38-rc3' into nextDmitry Torokhov9226-276811/+578681
2011-02-01Input: wm831x-ts - remove use of ternary operatorMark Brown1-5/+13
While being applied the driver was modified to add use of the ternary operator. Write the conditionals out longhand as I find it terribly unhelpful for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-01Linux 2.6.38-rc3v2.6.38-rc3Linus Torvalds1-1/+1
2011-02-01Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds25-210/+174
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: NFSv4 readdir loses entries NFS: Micro-optimize nfs4_decode_dirent() NFS: Fix an NFS client lockdep issue NFS construct consistent co_ownerid for v4.1 NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount NFS improve pnfs_put_deviceid_cache debug print NFS fix cb_sequence error processing NFS do not find client in NFSv4 pg_authenticate NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!" NFS: Prevent memory allocation failure in nfsacl_encode() NFS: nfsacl_{encode,decode} should return signed integer NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!" NFS: Fix "kernel BUG at fs/aio.c:554!" NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds(). NFS: fix handling of malloc failure during nfs_flush_multi()
2011-02-01Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds5-35/+41
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: smp_on_up: allow non-ARM SMP processors ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+ ARM: initrd: disable initrd if passed address overlaps reserved region ARM: footbridge: fix debug macros ARM: mmci: round down the bytes transferred on error ARM: mmci: complete the transaction on error ARM: 6642/1: mmci: calculate remaining bytes at error correctly
2011-02-01Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds6-34/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR arm: omap2: mux: fix compile warning omap1: Simplify use of omap_irq_flags omap2+: Fix unused variable warning for omap_irq_base
2011-02-01kernel.h: fix kernel-doc warningRandy Dunlap1-1/+1
Fix kernel-doc warning in kernel.h from commit 7ef88ad56145 ("BUILD_BUG_ON: make it handle more cases"): Warning(include/linux/kernel.h:605): No description found for parameter 'condition' Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-01Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds10-71/+152
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: xfs_bmap_add_extent_delay_real should init br_startblock xfs: fix dquot shaker deadlock xfs: handle CIl transaction commit failures correctly xfs: limit extsize to size of AGs and/or MAXEXTLEN xfs: prevent extsize alignment from exceeding maximum extent size xfs: limit extent length for allocation to AG size xfs: speculative delayed allocation uses rounddown_power_of_2 badly xfs: fix efi item leak on forced shutdown xfs: fix log ticket leak on forced shutdown.
2011-02-01virtio: update MAINTAINERSMichael S. Tsirkin1-0/+10
Patches should keep coming through Rusty but it helps if I'm Cc'd as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-01Merge branch 'usb-linus' of ↵Linus Torvalds48-381/+568
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits) usb: gadget: composite: avoid access beyond array max length USB: serial: handle Data Carrier Detect changes USB: gadget: Fix endpoint representation in ci13xxx_udc USB: gadget: Fix error path in ci13xxx_udc gadget probe function usb: pch_udc: Fix the worning log issue at gadget driver remove USB: serial: Updated support for ICOM devices USB: ehci-mxc: add work-around for efika mx/sb bug USB: unbreak ehci-mxc on otg port of i.MX27 drivers: update to pl2303 usb-serial to support Motorola cables USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products USB serial: add missing .usb_driver field in serial drivers USB: ehci-fsl: Fix 'have_sysif_regs' detection USB: g_printer: fix bug in module parameter definitions USB: g_printer: fix bug in unregistration USB: uss720: remove duplicate USB device MAINTAINERS: add ueagle-atm entry USB: EHCI: fix DMA deallocation bug USB: pch_udc: support new device ML7213 IOH usb: pch_udc: Fixed issue which does not work with g_serial usb: set ep_dev async suspend should be later than device_initialize ...
2011-02-01Merge branch 'staging-linus' of ↵Linus Torvalds27-134/+294
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits) staging: r8712u: Add new device IDs staging: brcm80211: fix suspend/resume issue in brcmsmac staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel Staging: iio: Aditional fixpoint formatted output bugfix staging: usbip: vhci: use urb->dev->portnum to find port staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO staging: usbip: vhci: friendly log messages for connection errors staging: usbip: vhci: refuse to enqueue for dead connections staging: usbip: vhci: give back URBs from in-flight unlink requests staging: usbip: vhci: update reference count for usb_device staging: usbip: stub: update refcounts for devices and interfaces staging: tidspbridge: replace mbox callback with notifier_call staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card Staging: speakup: &&/|| confusion in silent_store() iio: Fixpoint formatted output bugfix staging: rt2860: Fix incorrect netif_stop_queue usage warning staging: r8712u: Fix memory leak in firmware loading staging: tidspbridge: configure full L1 MMU range staging: rt2870sta: Add ID for Linksys WUSB100v2 Staging: xgfib: put parenthesis in the right place ...
2011-02-01Merge branch 'tty-linus' of ↵Linus Torvalds5-51/+58
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/serial: fix apbuart build n_hdlc: fix read and write locking serial: unbreak billionton CF card tty: use for_each_console() and WARN() on sysfs failures vt: fix issue when fbcon wants to takeover a second time. Fix up trivial conflict in drivers/tty/tty_io.c
2011-02-01ARM: smp_on_up: allow non-ARM SMP processorsRussell King1-12/+10
Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs supporting SMP must have the new CPU ID format, so check for this first. Then check for ARM11MPCore, which fails the MPIDR check. Lastly check the MPIDR reports multiprocessing extensions and that the CPU is part of a multiprocessing system. Cc: <stable@kernel.org> Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+Russell King1-16/+17
Ensure that the ISA/PCI IO space accessors are properly ordered on ARMv6+ architectures. These should always be ordered with respect to all other accesses. This also fixes __iormb() and __iowmb() not being visible to ioread/ iowrite if a platform defines its own MMIO accessors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: initrd: disable initrd if passed address overlaps reserved regionRussell King1-0/+6
Disable the initrd if the passed address already overlaps the reserved region. This avoids oopses on Netwinders when NeTTrom tells the kernel that an initrd is located at mem+4MB, but this overlaps the BSS, resulting in the kernels in-use BSS being freed. This should be applied to v2.6.37-stable. Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: footbridge: fix debug macrosRussell King1-2/+2
0ea1293 (arm: return both physical and virtual addresses from addruart) changed the way the 'addruart' worked, making it return both the virt and phys addresses. Unfortunately, for footbridge, these were reversed. Fix that. Tested on Netwinder. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: mmci: round down the bytes transferred on errorRussell King1-3/+4
We should not report incomplete blocks on error. Return the number of bytes successfully transferred, rounded down to the nearest block. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: mmci: complete the transaction on errorRussell King1-1/+1
When we encounter an error, make sure we complete the transaction otherwise we'll leave the request dangling. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 01:32:46 +0300