summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-04rt2x00: Don't treat ATIM queue as second beacon queue.Gertjan van Wingerde4-20/+16
Current code for the atim queue is strange, as it is considered in the rt2x00_dev structure as a second beacon queue. Normalize this by letting the atim queue have its own struct data_queue pointer in the rt2x00_dev structure. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Fix comment in rt2800pciHelmut Schaa1-1/+1
We don't use interrupt threads anymore. Fix the comment. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Revise irqmask locking for PCI devicesHelmut Schaa4-33/+22
The PCI device irqmask is locked by a spin_lock. Currently spin_lock_irqsave is used everywhere. To reduce the locking overhead replace spin_lock_irqsave in hard irq context with spin_lock and in soft irq context with spin_lock_irq. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Remove now unused crypto.aid fieldHelmut Schaa2-5/+2
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Fix rt2800 key assignment in multi bssid setupsHelmut Schaa1-13/+30
When setting up multiple BSSIDs in AP mode on an rt2800pci device we previously used the STAs AID to select an appropriate key slot. But since the AID is per VIF we can end up with two STAs having the same AID and thus using the same key index. This resulted in one STA overwriting the key information of another STA. Fix this by simply searching for the next unused entry in the pairwise key table. Also bring the key table init in sync with deleting keys by initializing the key table entries to 0 instead of 1. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Use an enum instead of u16 for the rate_mode TX descriptor fieldHelmut Schaa1-1/+1
This makes the code less error-prone. Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Don't call ieee80211_get_tx_rate for MCS ratesHelmut Schaa2-15/+15
ieee80211_get_tx_rate is not valid for HT rates. Hence, restructure the TX desciptor creation to be aware of MCS rates. The generic TX desciptor creation now cares about the rate_mode (CCK, OFDM, MCS, GF). As a result, ieee80211_get_tx_rate gets only called for legacy rates. Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Move TX descriptor field "ifs" into plcp substructHelmut Schaa7-15/+17
"ifs" is only used by no-HT devices. Move it into the plcp substruct and fill in the value only for no-HT devices. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Optimize TX descriptor memory layoutIvo van Doorn1-5/+5
Some fields only need to be u8 and for ifs and txop we can use the already available enums. Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Optimize TX descriptor handlingHelmut Schaa12-55/+79
HT and no-HT rt2x00 devices use a partly different TX descriptor. Optimize the tx desciptor memory layout by putting the PLCP and HT substructs into a union and introduce a new driver flag to decide which TX desciptor format is used by the device. This saves us the expensive PLCP calculation fOr HT devices and the HT descriptor setup on no-HT devices. Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Generate sw sequence numbers only for devices that need itHelmut Schaa5-4/+11
Newer devices like rt2800* own a hardware sequence counter and thus don't need to use a software sequence counter at all. Add a new driver flag to shortcut the software sequence number generation on devices that don't need it. rt61pci, rt73usb and rt2800* seem to make use of a hw sequence counter while rt2400pci and rt2500* need to do it in software. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Use unlikely for unexpected error condition in rt2x00_mac_txHelmut Schaa1-1/+1
rt2x00queue_write_tx_frame is unlikely to fail. Tell the compiler. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Add unlikely macro to special case tx status handlingHelmut Schaa1-1/+1
This special case shouldn't happen very often. Only if a frame that is not intended to be aggregated ends up in an AMPDU _and_ was intended to be sent at a different MCS rate as the aggregate. Hence, using unlikely is justified. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Remove useless NULL checkHelmut Schaa1-2/+1
Since tx_info->control.vif was already accessed before it cant't be NULL here. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Make use of unlikely during tx status processingHelmut Schaa1-2/+2
These conditions are unlikely to happen, tell the compiler. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Optimize calls to rt2x00queue_get_queueHelmut Schaa6-8/+25
In some cases (tx path for example) we don't need to check for non-tx queues in rt2x00queue_get_queue. Hence, introduce a new method rt2x00queue_get_tx_queue that is only valid for tx queues and use it in places where only tx queues are valid. Furthermore, this new method is quite short and as such can be inlined to avoid the function call overhead. This only converts the txdone functions of drivers that don't use an ATIM queue and the generic tx path. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: fix whitespace damage in the rt2800 specific codeGabor Juhos3-369/+378
The rt2800 specific code contains a lots of whitespace damage caused by the commit 'rt2x00: Add support for RT5390 chip'. This patch fixes those whitespace errors. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04b43: N-PHY: rev3+: implement gain ctl workaroundsRafał Miłecki1-9/+162
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04b43: N-PHY: rev3+: add tables with gain ctl workaroundsRafał Miłecki2-0/+128
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04b43: N-PHY: rev3+: correct switching analog coreRafał Miłecki1-2/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04lib-average: Make config option selectableMichael Buesch1-1/+8
Make CONFIG_AVERAGE selectable for out-of-tree users such as compat-wireless. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04ath9k_hw: Read noise floor only for available chains for AR9003Vasanthakumar Thiagarajan1-18/+19
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04ath9k: Add a debugfs interface to dump chip registersVasanthakumar Thiagarajan1-0/+54
/<debugfs_root>/ieee80211/phyX/ath9k/regdump is the interface to dump the registers. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rtl8187: Change rate-control feedbackLarry Finger2-5/+22
The driver for the RTL8187L chips returns IEEE80211_TX_STAT_ACK for all packets, even if the maximum number of retries was exhausted. In addition it fails to setup max_rates in the ieee80211_hw struct, This behavior may be responsible for the problems noted in Bug 14168. As the bug is very old, testers have not been found, and I do not have the case where the indicated signal is less than -70 dBm. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rtlwifi: usb parts should depend on CONFIG_USBJohn W. Linville1-3/+6
ERROR: "usb_unanchor_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! ERROR: "usb_control_msg" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! ERROR: "usb_submit_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! ERROR: "usb_get_dev" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! ERROR: "usb_kill_anchored_urbs" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! ERROR: "usb_put_dev" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! ERROR: "usb_free_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! ERROR: "usb_anchor_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! ERROR: "usb_alloc_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 make: *** [sub-make] Error 2 The USB-part of rtlwifi should depend on CONFIG_USB. This also corrects the existing check for CONFIG_PCI to build pci.o. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04Merge branch 'wireless-next-2.6' of ↵John W. Linville1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-03-04Merge branch 'for-linville' of ↵John W. Linville15-125/+235
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2011-03-04Merge branch 'master' of ↵John W. Linville10-302/+663
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-03-04MAINTAINERS: Update shaggy's email addressDave Kleikamp1-1/+1
Signed-off-by: Dave Kleikamp <shaggy@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04minimal fix for do_filp_open() raceAl Viro1-3/+10
failure exits on the no-O_CREAT side of do_filp_open() merge with those of O_CREAT one; unfortunately, if do_path_lookup() returns -ESTALE, we'll get out_filp:, notice that we are about to return -ESTALE without having trying to create the sucker with LOOKUP_REVAL and jump right into the O_CREAT side of code. And proceed to try and create a file. Usually that'll fail with -ESTALE again, but we can race and get that attempt of pathname resolution to succeed. open() without O_CREAT really shouldn't end up creating files, races or not. The real fix is to rearchitect the whole do_filp_open(), but for now splitting the failure exits will do. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-04sfc: Use write-combining to reduce TX latencyBen Hutchings3-10/+16
Based on work by Neil Turton <nturton@solarflare.com> and Kieran Mansley <kmansley@solarflare.com>. The BIU has now been verified to handle 3- and 4-dword writes within a single 128-bit register correctly. This means we can enable write- combining and only insert write barriers between writes to distinct registers. This has been observed to save about 0.5 us when pushing a TX descriptor to an empty TX queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-03-04Mark ptrace_{traceme,attach,detach} staticLinus Torvalds2-6/+3
They are only used inside kernel/ptrace.c, and have been for a long time. We don't want to go back to the bad-old-days when architectures did things on their own, so make them static and private. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04x86, numa: Fix numa_emulation code with memory-less node0Yinghai Lu1-5/+1
This crash happens on a system that does not have RAM on node0. When numa_emulation is compiled in, and: 1. we boot the system without numa=fake... 2. or we boot the system with numa=fake=128 to make emulation fail we will get: [ 0.076025] ------------[ cut here ]------------ [ 0.080004] kernel BUG at arch/x86/mm/numa_64.c:788! [ 0.080004] invalid opcode: 0000 [#1] SMP [...] need to use early_cpu_to_node() directly, because cpu_to_apicid and apicid_to_node will return node0 that is not onlined. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> LKML-Reference: <4D6ECF72.5010308@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-04sched: Fix sched rt group scheduling when hierachy is enabledBalbir Singh1-5/+9
The current sched rt code is broken when it comes to hierarchical scheduling, this patch fixes two problems 1. It adds redundant enqueuing (harmless) when it finds a queue has tasks enqueued, but it has no run time and it is not throttled. 2. The most important change is in sched_rt_rq_enqueue/dequeue. The code just picks the rt_rq belonging to the current cpu on which the period timer runs, the patch fixes it, so that the correct rt_se is enqueued/dequeued. Tested with a simple hierarchy /c/d, c and d assigned similar runtimes of 50,000 and a while 1 loop runs within "d". Both c and d get throttled, without the patch, the task just stops running and never runs (depends on where the sched_rt b/w timer runs). With the patch, the task is throttled and runs as expected. [ bharata, suggestions on how to pick the rt_se belong to the rt_rq and correct cpu ] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org LKML-Reference: <20110303113435.GA2868@balbir.in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-04ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410Mark Brown1-6/+6
The debugfs support added to the regulator API (which has been merged in during this merge window) creates directories for regulators named after the display names for the regulators so replace / as a separator for multiple supplies with + in the SMDK6410 machine. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410Mark Brown1-0/+1
Avoid relying on implicit inclusion of machine.h Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()Ben Dooks1-5/+6
Reduce the logging output of s3c64xx_dma_init1() as it is not useful for normal bootup (and we get an overall indication of the registration of the PL180 DMA block). This removes the following output from the log: s3c64xx_dma_init1: registering DMA 0 (e0808100) s3c64xx_dma_init1: registering DMA 1 (e0808120) s3c64xx_dma_init1: registering DMA 2 (e0808140) s3c64xx_dma_init1: registering DMA 3 (e0808160) s3c64xx_dma_init1: registering DMA 4 (e0808180) s3c64xx_dma_init1: registering DMA 5 (e08081a0) s3c64xx_dma_init1: registering DMA 6 (e08081c0) s3c64xx_dma_init1: registering DMA 7 (e08081e0) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Tone down SDHCI debuggingMark Brown1-1/+1
The MMC core calls s3c6400_setup_sdhcp_cfg_card() very frequently, causing the log message in there at KERN_INFO to be displayed a lot which is slow and overly chatty. Convert the message into a pr_debug() to tone this down. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Add clock for i2c1Ben Dooks1-0/+6
The clock for i2c1 has been missing for a while, add it to the list of clocks for the system and ensure it is initialised at startup. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Staticise non-exported GPIO to interrupt functionsMark Brown1-2/+2
No need to put these in the global namespace and sparse gets upset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devicesMark Brown1-0/+2
Ensures that the declaration agrees with the definition and makes sparse happy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C64XX: Fix keypad setup to configure correct number of rowsBen Dooks1-1/+1
The call to s3c_gpio_cfgrange_nopull() takes a size and base but this looks like it is trying to do base and end. This means it is configuring too many GPIOs and on the case of the Cragganmore means we're seeing an overflow of the ROW pins causing problems with the keyboard driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02Lars-Peter Clausen1-13/+13
The gta02 header file still uses the old S3C2410_GPJx defines instead of the S3C2410_GPJ(x) macro. Since the S3C2410_GPJx defines have already been removed this causes the following build failure: sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_set_spk': sound/soc/samsung/neo1973_wm8753.c:259: error: 'S3C2440_GPJ2' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c:259: error: (Each undeclared identifier is reported only once sound/soc/samsung/neo1973_wm8753.c:259: error: for each function it appears in.) sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_get_spk': sound/soc/samsung/neo1973_wm8753.c:267: error: 'S3C2440_GPJ2' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c: In function 'lm4853_event': sound/soc/samsung/neo1973_wm8753.c:276: error: 'S3C2440_GPJ1' undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c: At top level: sound/soc/samsung/neo1973_wm8753.c:439: error: 'S3C2440_GPJ2' undeclared here (not in a function) sound/soc/samsung/neo1973_wm8753.c:440: error: 'S3C2440_GPJ1' undeclared here (not in a function) This patches fixes the issue by doing a s,S3C2410_GPJ([\d]+),S3C2410_GPJ(\1),g on the file. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S5P64X0: Fix number of GPIO lines in Bank FBanajit Goswami1-2/+2
This patch modifies the number of total GPIO lines for Bank F for Samsung S5P6440 and S5P6450 SoCs from 2 to 16. This is necessary as the GPIO lines from 0 to 13 are reserved and only lines 14 and 15 are used. As during initialization, the line number starts at 0, putting 2 does not solve the intended purpose. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02Lars-Peter Clausen1-0/+1
The gta02 mach file references the ohci device. So we need to select S3C_DEV_USB_HOST to have the device available. This fixes the following linker errors: arch/arm/mach-s3c2440/built-in.o: In function 'gta02_machine_init': mach-gta02.c:(.init.text+0x370): undefined reference to 's3c_ohci_set_platdata' arch/arm/mach-s3c2440/built-in.o:(.init.data+0xac): undefined reference to 's3c_device_ohci' Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-04Blackfin: iflush: update anomaly 05000491 workaroundMike Frysinger1-0/+2
Recent feedback from design says we need three NOPs in the hardware loop. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-04Blackfin: outs[lwb]: make sure count is greater than 0Mike Frysinger1-4/+12
Some devices will use the outs* funcs with a length of zero, so make sure we do not write any data in that case. Reported-by: Gilbert Inho <gneny@edevice.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-04ARM: mach-shmobile: mackerel: modify LCDC clock divider valueKuninori Morimoto1-1/+1
mackerel WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-04ARM: mach-shmobile: ap4evb: modify LCDC clock divider valueKuninori Morimoto1-1/+1
ap4evb WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: Makoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-04Merge branch 'master' of ↵David S. Miller358-1967/+3306
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 00:20:06 +0300