summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-08-26Input: synaptics - fix handling of disabling gesture modeDmitry Torokhov1-4/+8
Bit 2 of the mode byte has dual meaning: it can disable reporting of gestures when touchpad works in Relative mode or normal Absolute mode, or it can enable so called Extended W-Mode when touchpad uses enhanced Absolute mode (W-mode). The extended W-Mode confuses our driver and causes missing button presses on some Thinkpads (x250, T450s), so let's make sure we do not enable it. Also, according to the spec W mode "... bit is defined only in Absolute mode on pads whose capExtended capability bit is set. In Relative mode and in TouchPads without this capability, the bit is reserved and should be left at 0.", so let's make sure we respect this requirement as well. Reported-by: Nick Bowler <nbowler@draconx.ca> Suggested-by: Gabor Balla <gaborwho@gmail.com> Tested-by: Gabor Balla <gaborwho@gmail.com> Tested-by: Nick Bowler <nbowler@draconx.ca> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-20Input: gpio_keys_polled - request GPIO pin as input.Vincent Pelletier1-1/+1
GPIOF_IN flag was lost in: Commit 633a21d80b4a("input: gpio_keys_polled: Add support for GPIO descriptors"). Without this flag, legacy code path (for non-descriptor GPIO declarations) would configure GPIO as output (0 meaning GPIOF_DIR_OUT | GPIOF_INIT_LOW). Cc: stable@vger.kernel.org Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-08Input: elantech - add special check for fw_version 0x470f01 touchpadDuson Lin2-2/+21
It is no need to check the packet[0] for sanity check when doing elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad. Signed-off by: Duson Lin <dusonlin@emc.com.tw> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: twl4030-vibra - fix ERROR: Bad of_node_put() warningMarek Belisko1-1/+2
Fix following: [ 8.862274] ERROR: Bad of_node_put() on /ocp/i2c@48070000/twl@48/audio [ 8.869293] CPU: 0 PID: 1003 Comm: modprobe Not tainted 4.2.0-rc2-letux+ #1175 [ 8.876922] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 8.883514] [<c00159e0>] (unwind_backtrace) from [<c0012488>] (show_stack+0x10/0x14) [ 8.891693] [<c0012488>] (show_stack) from [<c05cb810>] (dump_stack+0x78/0x94) [ 8.899322] [<c05cb810>] (dump_stack) from [<c02cfd5c>] (kobject_release+0x68/0x7c) [ 8.907409] [<c02cfd5c>] (kobject_release) from [<bf0040c4>] (twl4030_vibra_probe+0x74/0x188 [twl4030_vibra]) [ 8.917877] [<bf0040c4>] (twl4030_vibra_probe [twl4030_vibra]) from [<c03816ac>] (platform_drv_probe+0x48/0x90) [ 8.928497] [<c03816ac>] (platform_drv_probe) from [<c037feb4>] (really_probe+0xd4/0x238) [ 8.937103] [<c037feb4>] (really_probe) from [<c0380160>] (driver_probe_device+0x30/0x48) [ 8.945678] [<c0380160>] (driver_probe_device) from [<c03801e0>] (__driver_attach+0x68/0x8c) [ 8.954589] [<c03801e0>] (__driver_attach) from [<c037ea60>] (bus_for_each_dev+0x50/0x84) [ 8.963226] [<c037ea60>] (bus_for_each_dev) from [<c037f828>] (bus_add_driver+0xcc/0x1e4) [ 8.971832] [<c037f828>] (bus_add_driver) from [<c0380b60>] (driver_register+0x9c/0xe0) [ 8.980255] [<c0380b60>] (driver_register) from [<c00097e0>] (do_one_initcall+0x100/0x1b8) [ 8.988983] [<c00097e0>] (do_one_initcall) from [<c00b8008>] (do_init_module+0x58/0x1c0) [ 8.997497] [<c00b8008>] (do_init_module) from [<c00b8cac>] (SyS_init_module+0x54/0x64) [ 9.005950] [<c00b8cac>] (SyS_init_module) from [<c000ed20>] (ret_fast_syscall+0x0/0x54) [ 9.015838] input: twl4030:vibrator as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:audio/input/input2 node passed to of_find_node_by_name is put inside that function and new node is returned if found. Free returned node not already freed node. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-04Input: alps - only Dell laptops have separate button bits for v2 dualpoint ↵Hans de Goede2-4/+10
sticks It turns out that only Dell laptops have the separate button bits for v2 dualpoint sticks and that commit 92bac83dd79e ("Input: alps - non interleaved V2 dualpoint has separate stick button bits") causes regressions on Toshiba laptops. This commit adds a check for Dell laptops to the code for handling these extra button bits, fixing this regression. This patch has been tested on a Dell Latitude D620 to make sure that it does not reintroduce the original problem. Reported-and-tested-by: Douglas Christman <douglaschristman@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-04Input: axp20x-pek - add module aliasChen-Yu Tsai1-0/+1
Add a proper module alias so the driver can be autoloaded when the parent axp20x mfd driver registers its cells. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Carlo Caione <carlo@caione.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-04Input: turbografx - fix potential out of bound accessDmitry Torokhov1-1/+1
Patch 17dd3f0f7aa7: "[PATCH] drivers/input/joystick: convert to dynamic input_dev allocation" from Sep 15, 2005, leads to the following static checker warning: drivers/input/joystick/turbografx.c:235 tgfx_probe() error: buffer overflow 'tgfx_buttons' 5 <= 5 drivers/input/joystick/turbografx.c 195 for (i = 0; i < n_devs; i++) { 196 if (n_buttons[i] < 1) 197 continue; 198 199 if (n_buttons[i] > 6) { ^^^^^^^^^^^^^^^^ Possibly off by one. >= 6. Let's change the upper value to ARRAY_SIZE(tgfx_buttons) to ensure we do not reach past the end of the array. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28Revert "Input: zforce - don't overwrite the stack"Dmitry Torokhov1-1/+1
This reverts commit 7d01cd261c76f95913c81554a751968a1d282d3a because with given FRAME_MAXSIZE of 257 the check will never trigger and it causes warnings from GCC (with -Wtype-limits). Also the check was incorrect as it was not accounting for the already read 2 bytes of data stored in the buffer.
2015-07-28Input: bcm5974 - add support for the 2015 Macbook ProJohn Horan1-2/+31
Add support for the MacBookPro12,1 model. This patch needs to be applied together with the accompanied HID patch, as usual. Tested-by: John Horan <knasher@gmail.com> Tested-by: Jochen Radmacher <jradmacher@gmx.de> Tested-by: Yang Hongyang <burnef@gmail.com> Tested-by: Yen-Chin, Lee <coldnew.tw@gmail.com> Tested-by: George Hilios <ghilios@gmail.com> Tested-by: Janez Urevc <janez@janezurevc.name> Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28HID: apple: Add support for the 2015 Macbook ProHenrik Rydberg3-0/+15
This patch adds keyboard support for MacbookPro12,1 as WELLSPRING9 (0x0272, 0x0273, 0x0274). The touchpad is handled in a separate bcm5974 patch, as usual. Tested-by: John Horan <knasher@gmail.com> Tested-by: Jochen Radmacher <jradmacher@gmx.de> Tested-by: Yang Hongyang <burnef@gmail.com> Tested-by: Yen-Chin, Lee <coldnew.tw@gmail.com> Tested-by: George Hilios <ghilios@gmail.com> Tested-by: Janez Urevc <janez@janezurevc.name> Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Acked-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28Input: bcm5974 - prepare for a new trackpad generationHenrik Rydberg1-51/+81
With the advent of the Macbook Pro 12, we see a new generation of trackpads, capable of force sensoring and haptic feedback. This patch prepares for the new device by adding configuration data for the code paths that would otherwise look different. Tested-by: John Horan <knasher@gmail.com> Tested-by: Jochen Radmacher <jradmacher@gmx.de> Tested-by: Yang Hongyang <burnef@gmail.com> Tested-by: Yen-Chin, Lee <coldnew.tw@gmail.com> Tested-by: George Hilios <ghilios@gmail.com> Tested-by: Janez Urevc <janez@janezurevc.name> Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28Input: synaptics - dump ext10 capabilities as wellJiri Kosina1-2/+2
Make extended capabilities obtained through $10 query also available in touchpad identification. Signed-off-by: Jiri Kosina <jkosina@suse.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: goodix - fix touch coordinates on WinBook TW100 and TW700Bastien Nocera1-0/+36
The touchscreen on the WinBook TW100 and TW700 don't match the default display, with 0,0 touches being reported when touching at the bottom right of the screen. 1280,800 0,800 +-------------+ | | | | | | +-------------+ 1280,0 0,0 It's unfortunately impossible to detect this problem with data from the DSDT, or other auxiliary metadata, so fallback to quirking this specific model of tablet instead. Signed-off-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: LEDs - skip unnamed LEDsDmitry Torokhov1-2/+14
Devices may declare more LEDs than what is known to input-leds (HID does this for some devices). Instead of showing ugly warnings on connect and, even worse, oopsing on disconnect, let's simply ignore LEDs that are not known to us. Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: usbtouchscreen - avoid unresponsive TSC-30 touch screenBernhard Bender1-0/+3
This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Cc: stable@vger.kernel.org Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com> Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16Input: elantech - force resolution of 31 u/mmPeter Hutterer1-5/+8
All Elantech touchpads pre-v4 with dynamic resolution queries have a fixed resolution of 800dpi -> 31.49 units/mm. Set this statically, so userspace does not have to guess. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16Input: zforce - don't overwrite the stackOleksij Rempel1-1/+1
If we get a corrupted packet with PAYLOAD_LENGTH > FRAME_MAXSIZE, we will silently overwrite the stack. Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-10Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors"Dmitry Torokhov1-1/+1
This reverts commit 63c4fda3c0bb841b1aad1298fc7fe94058fc79f8 as it causes issues with detecting 3-finger taps. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481 Cc: stable@vger.kernel.org Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2015-07-07Input: elan_i2c - change the hover event from MT to STduson1-7/+5
The firmware only reports hover condition while the very first contact is approaching the surface; the hover is not reported for the subsequent contacts. Therefore we should not be using ABS_MT_DISTANCE to report hover but rather its single-touch counterpart ABS_DISTANCE. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-04Merge branch 'next' into for-linusDmitry Torokhov12-76/+1296
Prepare second round of input updates for 4.2 merge window.
2015-07-01Input: wdt87xx_i2c - add a scaling factor for TOUCH_MAJOR eventHungNien Chen1-5/+14
Get the scaling factor when it reads the sys params. The width value will multiple the factor and report the value in the TOUCH_MAJOR event. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-01Input: wdt87xx_i2c - remove stray newline in diagnostic messageDmitry Torokhov1-1/+1
There is no reason to have a newline between plat_id and xml_id1. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-29Input: arc_ps2 - add HAS_IOMEM dependencySebastian Ott1-0/+1
Fix this compile error: drivers/built-in.o: In function `arc_ps2_probe': /mnt/linux/drivers/input/serio/arc_ps2.c:206: undefined reference to `devm_ioremap_resource' Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-29Input: wdt87xx_i2c - fix format warningDmitry Torokhov1-1/+1
This fixes the following warning: drivers/input/touchscreen/wdt87xx_i2c.c: In function 'wdt87xx_validate_firmware': >> drivers/input/touchscreen/wdt87xx_i2c.c:472:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'size_t' [-Wformat=] size, fw->size); Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-26Input: improve parsing OF parameters for touchscreensDmitry Torokhov4-29/+49
When applying touchscreen parameters specified in device tree let's make sure we keep whatever setup was done by the driver and not reset the missing values to zero. Reported-by: Pavel Machek <pavel@ucw.cz> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-26Input: edt-ft5x06 - mark as direct input deviceDmitry Torokhov1-6/+1
edt-ft5x06 is a touchscreen and thus a direct input device; let's amrk it as such. This also allows us to drop some initialization code as input_init_mt_slots() will do that for us. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-26Input: use for_each_set_bit() where appropriateAnshul Garg1-25/+9
Instead of iterating over all bits in a bitmap and test them individually let's siwtch to for_each_set_bit() which is more compact and is also faster. Also use bitmap_weight() when counting number of set bits. This also fixes INPUT_DO_TOGGLE() implementation as it should have used *_CNT as the upper boundary, not *_MAX. Signed-off-by: Anshul Garg <aksgarg1989@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-25Input: add a driver for wdt87xx touchscreen controllerHungNien Chen3-0/+1153
This is a driver for Weida HiTech WDT87xx series touchscreen controller. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-25Input: axp20x-pek - fix reporting button state as invertedHans de Goede1-2/+6
Currently we are reporting the button state as inverted on all boards with an axp209 pmic, tested on a ba10-tvbox, bananapi, bananapro, cubietruck and utoo-p66 tablet. The axp209 datasheet clearly states that the power button must be connected between the PWRON key and ground. Which means that on a press we will get a falling edge (dbf) irq not a rising one, and likewise on release we will get a rising edge (dbr) irq, not a falling one. This commit swaps the check for the 2 irqs fixing the inverted reporting of the power button state. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Carlo Caione <carlo@caione.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-23Input: xpad - re-send LED command on present eventPavel Rojtberg1-8/+20
The controller only receives commands when its present. So for the correct LED to be lit the LED command has to be sent on the present event. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-23Input: xpad - set the LEDs properly on XBox Wireless controllersPierre-Loup A. Griffais1-5/+45
Based on Patch by Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>: Add the logic to set the LEDs on XBox Wireless controllers. Command sequence found by sniffing the Windows data stream when plugging the device in. Updated based on comments on linux-input: unify codepaths in xpad_send_led_command for wired/ wireless controller. Also document command values for clarification. All values tested on Xbox 360 Wireless Controller. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-22Input: imx_keypad - check for clk_prepare_enable() errorFabio Estevam1-1/+3
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-22Merge branch 'next' into for-linusDmitry Torokhov53-374/+1277
Prepare first round of input updates for 4.2 merge window.
2015-06-17Input: pixcir_i2c_ts - fix receive errorFrodo Lai1-1/+1
The i2c_master_recv() uses readsize to receive data from i2c but compares to size of rdbuf which is always 27. This would cause problem when the max_fingers is not 5. Change the comparison value to readsize instead. Fixes: 36874c7e219 ("Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDs:) Cc: stable@vger.kernel.org Signed-off-by: Frodo Lai <frodo_lai@bcmcom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-17MAINTAINERS: remove non existent input mt git treeBaruch Siach1-1/+0
The "INPUT MULTITOUCH (MT) PROTOCOL" entry git tree is not there on git.kernel.org. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-17Input: improve usage of gpiod APIUwe Kleine-König3-21/+6
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Simplify drivers accordingly. Note that in the case of the drv260x driver error checking is more strict now because -ENOSYS is reported to the caller now. But this should only be returned if GPIOLIB is disabled which shouldn't happen as the driver depends on GPIOLIB. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-17tty/vt/keyboard: define LED triggers for VT keyboard lock statesSamuel Thibault1-8/+19
In addition to defining triggers for VT LED states, let's define triggers for VT keyboard lock states, such as "kbd-shiftlock", "kbd-altgrlock", etc. This permits to fix #7063 from userland by using a modifier to implement proper CapsLock behavior and have the keyboard caps lock led show that modifier state. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-17tty/vt/keyboard: define LED triggers for VT LED statesSamuel Thibault1-24/+117
Now that input core allows controlling keyboards LEDs via standard LED subsystem triggers let's switch VT keyboard code to make use of this feature. We will define the following standard triggers: "kbd-scrollock", "kbd-numlock", "kbd-capslock", and "kbd-kanalock" which are default triggers for respective LEDs on keyboards. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-12Input: export LEDs as class devices in sysfsSamuel Thibault5-6/+226
This change creates a new input handler called "leds" that exports LEDs on input devices as standard LED class devices in sysfs and allows controlling their state via sysfs or via any of the standard LED triggers. This allows to re-purpose and reassign LDEs on the keyboards to represent states other than the standard keyboard states (CapsLock, NumLock, etc). The old API of controlling input LEDs by writing into /dev/input/eventX devices is still present and will take precedence over accessing via LEDs subsystem (i.e. it may override state set by a trigger). If input device is "grabbed" then requests coming through LED subsystem will be ignored. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-12Input: cyttsp4 - use swap() in cyttsp4_get_touch()Fabian Frederick1-4/+1
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-12Input: goodix - do not explicitly set evbits in input deviceDmitry Torokhov1-4/+0
input_mt_init_slots() will do that for us. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09Input: goodix - export id and version read from deviceIrina Tirdea1-12/+21
Goodix touchscreens export through their registers a Product ID and Firmware Version. The Product ID is an ASCII encoding of the product name (e.g.: "911"). Export to sysfs (through the input subsystem) the product id and firmware version read from the device rather than using constant values. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09Input: goodix - fix variable length array warningIrina Tirdea1-1/+1
Fix sparse warning: drivers/input/touchscreen/goodix.c:182:26: warning: Variable length array is used. Replace the variable length array with fixed length. Some Goodix devices have maximum 5 touch points, while others have 10 touch points. Using the maximum length (80 bytes) for all devices will lead to wasting 40 bytes on stack when using devices with maximum 5 touch points. However, that is preferable to using kmalloc which will use even more resources. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09Input: goodix - fix alignment issuesIrina Tirdea1-8/+8
Fix alignment to match open parenthesis detected by running checkpatch.pl --strict. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09Input: add OnKey driver for DA9063 MFD partSteve Twiss4-0/+238
This adds OnKey driver support for DA9063. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09Input: elan_i2c - add product IDs FW namesCharlie Mooney2-7/+18
Previously the elan_i2c touchpad driver would simply request the firmware "/lib/firmware/elan_i2c.bin", which does not work well if there are multiple such devices in the system. Let's append the "product ID" (by using the same function as the sysfs interface for consistency) to the filename. This results in filenames of the form "/lib/firmware/elan_i2c_72.0.bin", allowing you to support multiple elan_i2c touchpads on the same device by simply naming each device's FW with its corresponding product ID. This way when you trigger a fw update the driver will load the correct binary. Signed-off-by: Charlie Mooney <charliemooney@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09Input: elan_i2c - add support for multi IC type and iap formatDuson Lin4-11/+49
In order to support multiple IC types for i2c/smbus protocol, add get ic type command and use this data when checking firmware page count and signature address. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-08Input: synaptics - add min/max quirk for Lenovo S540Peter Hutterer1-1/+6
https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Cc: stable@vger.kernel.org Tested-by: tommy.gagnes@gmail.com Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-05Input: alps - do not reduce trackpoint speed by halfHans de Goede1-3/+2
On some v7 devices (e.g. Lenovo-E550) the deltas reported are typically only in the 0-1 range dividing this by 2 results in a range of 0-0. And even for v7 devices where this does not lead to making the trackstick entirely unusable, it makes it twice as slow as before we added v7 support and were using the ps/2 mouse emulation of the dual point setup. If some kind of generic slowdown is actually necessary for some devices, then that belongs in userspace, not in the kernel. Cc: stable@vger.kernel.org Reported-and-tested-by: Rico Moorman <rico.moorman@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-05Input: elantech - add new icbody type洪一竹1-0/+1
This adds new icbody type to the list recognized by Elantech PS/2 driver. Cc: stable@vger.kernel.org Signed-off-by: Sam Hung <sam.hung@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 10:40:29 +0300