summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-12-12drm/i915: Extract p2 divider correctly for gen2 LVDS dual channelVille Syrjälä1-2/+7
In order to determine the correct p2 divider for LVDS on gen2, we need to check the CLKB mode from the LVDS port register to determine if we're dealing with single or dual channel LVDS. Cc: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-12drm/i915: Record BB_ADDR for every ringVille Syrjälä3-8/+9
Every ring seems to have a BB_ADDR registers, so include them all in the error state. v2: Also include the _UDW on BDW Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-12drm/i915: Use 32bit read for BB_ADDRVille Syrjälä1-1/+1
The BB_ADDR register is documented to be 32bits at least since SNB. Prior to that the high 32bits were listed as MBZ, so using a 64bit read doesn't seem worth anything. Also the simulator doesn't like the 64bit read. So just switch to using a 32bit read instead. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-12drm/i915: fix VDD override off waitPaulo Zanoni1-1/+3
If we're disabling the VDD override bit and the panel is enabled, we don't need to wait for anything. If the panel is disabled, then we need to actually wait for panel_power_cycle_delay, not panel_power_down_delay, because the power down delay was already respected when we disabled the panel. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-12drm/i915: don't touch the VDD when disabling the panelPaulo Zanoni2-10/+2
I don't see a reason to touch VDD when we're disabling the panel: since the panel is enabled, we don't need VDD. This saves a few sleep calls from the vdd_on and vdd_off functions at every modeset. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69693 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Fix the patch mangle wiggle has done ... Spotted by Paulo. Also drop the runtime_pm_put call which now has to go due to different patch ordering. Also from Paul.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-12ASoC: dmaengine: fix deferred probe detectionStephen Warren1-1/+1
Check the return value of dma_request_slave_channel_reason() to see if deferred probe happens, not the variable the return value will be assigned to later. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 5eda87b890f8 ("ASoC: dmaengine: support deferred probe for DMA channels") Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-12Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"David S. Miller16-426/+302
This reverts commit 99023e90fe5c147ea0665bda86764ea44f08a622. Accidently checked this into 'net' instead of 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-128390 : Replace ei_debug with msg_enable/NETIF_MSG_* featureMatthew Whitehead16-302/+426
Removed the shared ei_debug variable. Replaced it by adding u32 msg_enable to the private struct ei_device. Now each 8390 ethernet instance has a per-device logging variable. Changed older style printk() calls to more canonical forms. Tested on: ne, ne2k-pci, smc-ultra, and wd hardware. V4.0 - Substituted pr_info() and pr_debug() for printk() KERN_INFO and KERN_DEBUG V3.0 - Checked for cases where pr_cont() was most appropriate choice. - Changed module parameter from 'debug' to 'msg_enable' because debug was no longer the best description. V2.0 - Changed netif_msg_(drv|probe|ifdown|rx_err|tx_err|tx_queued|intr|rx_status|hw) to netif_(dbg|info|warn|err) where possible. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12xen-netback: make sure skb linear area covers checksum fieldPaul Durrant1-32/+28
skb_partial_csum_set requires that the linear area of the skb covers the checksum field. The checksum setup code in netback was only doing that pullup in the case when the pseudo header checksum was being recalculated though. This patch makes that pullup unconditional. (I pullup the whole transport header just for simplicity; the requirement is only for the check field but in the case of UDP this is the last field in the header and in the case of TCP it's the last but one). The lack of pullup manifested as failures running Microsoft HCK network tests on a pair of Windows 8 VMs and it has been verified that this patch fixes the problem. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICKJosé Miguel Gonçalves1-2/+14
Some I2C bus drivers do not allow zero-length data transfers which are required to start a measurement with the HIH6130/1 sensor. Nevertheless, we can overcome this limitation by writing a zero dummy byte. This byte is ignored by the sensor and was verified to be working with the OMAP I2C bus driver in a BeagleBone board. Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt> [Guenter Roeck: Simplified complexity of write_length initialization] Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-12-12net: smc91x: Fix device tree based configuration so it's usableTony Lindgren2-10/+39
Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Mark Rutland <mark.rutland@arm.com> Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12udp: ipv4: fix potential use after free in udp_v4_early_demux()Eric Dumazet1-3/+6
pskb_may_pull() can reallocate skb->head, we need to move the initialization of iph and uh pointers after its call. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12macvtap: signal truncated packetsJason Wang1-5/+6
macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the trunca checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12tun: unbreak truncated packet signallingJason Wang1-7/+9
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532 (tuntap: hardware vlan tx support) breaks the truncated packet signal by nev return a length greater than iov length in tun_put_user(). This patch fixes by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of io length. Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12net: sched: htb: fix the calculation of quantumYang Yingliang1-8/+12
Now, 32bit rates may be not the true rate. So use rate_bytes_ps which is from max(rate32, rate64) to calcualte quantum. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12net: sched: tbf: fix the calculation of max_sizeYang Yingliang1-45/+70
Current max_size is caluated from rate table. Now, the rate table has been replaced and it's wrong to caculate max_size based on this rate table. It can lead wrong calculation of max_size. The burst in kernel may be lower than user asked, because burst may gets some loss when transform it to buffer(E.g. "burst 40kb rate 30mbit/s") and it seems we cannot avoid this loss. Burst's value(max_size) based on rate table may be equal user asked. If a packet's length is max_size, this packet will be stalled in tbf_dequeue() because its length is above the burst in kernel so that it cannot get enough tokens. The max_size guards against enqueuing packet sizes above q->buffer "time" in tbf_enqueue(). To make consistent with the calculation of tokens, this patch add a helper psched_ns_t2l() to calculate burst(max_size) directly to fix this problem. After this fix, we can support to using 64bit rates to calculate burst as well. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11micrel: add support for KSZ8041RNLISergei Shtylyov2-0/+17
Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not match the documented ID of 0x0022151x (where 'x' is the revision). We have to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same as KSZ8041 one, differing only in the 'phy_id' and 'name' fields. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'for-davem' of ↵David S. Miller1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Just one patch this time -- a fix from Felix Fietkau to fix the duration calculation for non-aggregated packets in ath9k. This is a small change and it is obviously specific to ath9k. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainersBjorn Helgaas1-0/+33
Add entries for PCI host controller drivers in drivers/pci/host/. Signed-off-by: Mohit Kumar <mohit.kumar@st.com> # DESIGNWARE Signed-off-by: Pratyush Anand <pratyush.anand@st.com> # DESIGNWARE Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> # R-CAR Double-Plus-Acked-by: Jason Cooper <jason@lakedaemon.net> # MVEBU Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Richard Zhu <r65037@freescale.com> # IMX6
2013-12-11Merge branch 'master' of ↵John W. Linville1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-12-11ASoC: dmaengine: support deferred probe for DMA channelsStephen Warren1-4/+16
Enhance dmaengine_pcm_request_chan_of() to support deferred probe for DMA channels, by using the new dma_request_slave_channel_or_err() API. This prevents snd_dmaengine_pcm_register() from succeeding without acquiring DMA channels due to the relevant DMA controller not yet being registered. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-11Merge branch 'topic/defer_probe' of ↵Mark Brown3-10/+48
git://git.infradead.org/users/vkoul/slave-dma into asoc-dma The following branch/patch is a dependency for my "ASoC: dmaengine: support deferred probe for DMA channels". If you could pull the branch below into your topic/dma, then merge my ASoC patch, that would be great. I would then like to merge your topic/dma into the Tegra tree as a baseline for the Tegra conversion to the standard DMA DT bindings. Vinod has confirmed this his topic/defer_probe branch is stable, and won't be rebased: https://lkml.org/lkml/2013/12/10/463
2013-12-11ALSA: hda - Add static DAC/pin mapping for AD1986A codecTakashi Iwai3-1/+35
AD1986A codec is a pretty old codec and has really many hidden restrictions. One of such is that each DAC is dedicated to certain pin although there are possible connections. Currently, the generic parser tries to assign individual DACs as much as possible, and this lead to two bad situations: connections where the sound actually doesn't work, and connections conflicting other channels. We may fix this by trying to find the best connections more harder, but as of now, it's easier to give some hints for paired DAC/pin connections and honor them if available, since such a hint is needed only for specific codecs (right now only AD1986A, and there will be unlikely any others in future). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64971 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66621 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-12-11ALSA: hda - One more Dell headset detection quirkHui Wang1-0/+1
On the Dell machines with codec whose Subsystem Id is 0x10280624, no external microphone can be detected when plugging a 3-ring headset. If we add "model=dell-headset-multi" for the snd-hda-intel.ko, the problem will disappear. BugLink: https://bugs.launchpad.net/bugs/1259790 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-12-11ALSA: hda - hdmi: Fix IEC958 ctl indexes for some simple HDMI devicesAnssi Hannula1-2/+3
In case a single HDA card has both HDMI and S/PDIF outputs, the S/PDIF outputs will have their IEC958 controls created starting from index 16 and the HDMI controls will be created starting from index 0. However, HDMI simple_playback_build_controls() as used by old VIA and NVIDIA codecs incorrectly requests the IEC958 controls to be created with an S/PDIF type instead of HDMI. In case the card has other codecs that have HDMI outputs, the controls will be created with wrong index=16, causing them to e.g. be unreachable by the ALSA "hdmi" alias. Fix that by making simple_playback_build_controls() request controls with HDMI indexes. Not many cards have an affected configuration, but e.g. ASUS M3N78-VM contains an integrated NVIDIA HDA "card" with: - a VIA codec that has, among others, an S/PDIF pin incorrectly labelled as an HDMI pin, and - an NVIDIA MCP7x HDMI codec. Reported-by: MysterX on #openelec Tested-by: MysterX on #openelec Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> # 3.8+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-12-11udp: ipv4: fix an use after free in __udp4_lib_rcv()Eric Dumazet1-10/+6
Dave Jones reported a use after free in UDP stack : [ 5059.434216] ========================= [ 5059.434314] [ BUG: held lock freed! ] [ 5059.434420] 3.13.0-rc3+ #9 Not tainted [ 5059.434520] ------------------------- [ 5059.434620] named/863 is freeing memory ffff88005e960000-ffff88005e96061f, with a lock still held there! [ 5059.434815] (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.435012] 3 locks held by named/863: [ 5059.435086] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff8143054d>] __netif_receive_skb_core+0x11d/0x940 [ 5059.435295] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81467a5e>] ip_local_deliver_finish+0x3e/0x410 [ 5059.435500] #2: (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.435734] stack backtrace: [ 5059.435858] CPU: 0 PID: 863 Comm: named Not tainted 3.13.0-rc3+ #9 [loadavg: 0.21 0.06 0.06 1/115 1365] [ 5059.436052] Hardware name: /D510MO, BIOS MOPNV10J.86A.0175.2010.0308.0620 03/08/2010 [ 5059.436223] 0000000000000002 ffff88007e203ad8 ffffffff8153a372 ffff8800677130e0 [ 5059.436390] ffff88007e203b10 ffffffff8108cafa ffff88005e960000 ffff88007b00cfc0 [ 5059.436554] ffffea00017a5800 ffffffff8141c490 0000000000000246 ffff88007e203b48 [ 5059.436718] Call Trace: [ 5059.436769] <IRQ> [<ffffffff8153a372>] dump_stack+0x4d/0x66 [ 5059.436904] [<ffffffff8108cafa>] debug_check_no_locks_freed+0x15a/0x160 [ 5059.437037] [<ffffffff8141c490>] ? __sk_free+0x110/0x230 [ 5059.437147] [<ffffffff8112da2a>] kmem_cache_free+0x6a/0x150 [ 5059.437260] [<ffffffff8141c490>] __sk_free+0x110/0x230 [ 5059.437364] [<ffffffff8141c5c9>] sk_free+0x19/0x20 [ 5059.437463] [<ffffffff8141cb25>] sock_edemux+0x25/0x40 [ 5059.437567] [<ffffffff8141c181>] sock_queue_rcv_skb+0x81/0x280 [ 5059.437685] [<ffffffff8149bd21>] ? udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.437805] [<ffffffff81499c82>] __udp_queue_rcv_skb+0x42/0x240 [ 5059.437925] [<ffffffff81541d25>] ? _raw_spin_lock+0x65/0x70 [ 5059.438038] [<ffffffff8149bebb>] udp_queue_rcv_skb+0x26b/0x4b0 [ 5059.438155] [<ffffffff8149c712>] __udp4_lib_rcv+0x152/0xb00 [ 5059.438269] [<ffffffff8149d7f5>] udp_rcv+0x15/0x20 [ 5059.438367] [<ffffffff81467b2f>] ip_local_deliver_finish+0x10f/0x410 [ 5059.438492] [<ffffffff81467a5e>] ? ip_local_deliver_finish+0x3e/0x410 [ 5059.438621] [<ffffffff81468653>] ip_local_deliver+0x43/0x80 [ 5059.438733] [<ffffffff81467f70>] ip_rcv_finish+0x140/0x5a0 [ 5059.438843] [<ffffffff81468926>] ip_rcv+0x296/0x3f0 [ 5059.438945] [<ffffffff81430b72>] __netif_receive_skb_core+0x742/0x940 [ 5059.439074] [<ffffffff8143054d>] ? __netif_receive_skb_core+0x11d/0x940 [ 5059.442231] [<ffffffff8108c81d>] ? trace_hardirqs_on+0xd/0x10 [ 5059.442231] [<ffffffff81430d83>] __netif_receive_skb+0x13/0x60 [ 5059.442231] [<ffffffff81431c1e>] netif_receive_skb+0x1e/0x1f0 [ 5059.442231] [<ffffffff814334e0>] napi_gro_receive+0x70/0xa0 [ 5059.442231] [<ffffffffa01de426>] rtl8169_poll+0x166/0x700 [r8169] [ 5059.442231] [<ffffffff81432bc9>] net_rx_action+0x129/0x1e0 [ 5059.442231] [<ffffffff810478cd>] __do_softirq+0xed/0x240 [ 5059.442231] [<ffffffff81047e25>] irq_exit+0x125/0x140 [ 5059.442231] [<ffffffff81004241>] do_IRQ+0x51/0xc0 [ 5059.442231] [<ffffffff81542bef>] common_interrupt+0x6f/0x6f We need to keep a reference on the socket, by using skb_steal_sock() at the right place. Note that another patch is needed to fix a race in udp_sk_rx_dst_set(), as we hold no lock protecting the dst. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'sctp'David S. Miller2-19/+89
Wang Weidong says: ==================== sctp: check the rto_min and rto_max v6 -> v7: -patch2: fix the whitespace issues which pointed out by Daniel v5 -> v6: split the v5' first patch to patch1 and patch2, and remove the macro in constants.h -patch1: do rto_min/max socket option handling in its own patch, and fix the check of rto_min/max. -patch2: do rto_min/max sysctl handling in its own patch. -patch3: add Suggested-by Daniel. v4 -> v5: - patch1: add marco in constants.h and fix up spacing as suggested by Daniel - patch2: add a patch for fix up do_hmac_alg for according to do_rto_min[max] v3 -> v4: -patch1: fix use init_net directly which suggested by Vlad. v2 -> v3: -patch1: add proc_handler for check rto_min and rto_max which suggested by Vlad v1 -> v2: -patch1: fix the From Name which pointed out by David, and add the ACK by Neil ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11sctp: fix up a spacingwangweidong1-5/+2
fix up spacing of proc_sctp_do_hmac_alg for according to the proc_sctp_do_rto_min[max] in sysctl.c Suggested-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11sctp: add check rto_min and rto_max in sysctlwangweidong1-4/+65
rto_min should be smaller than rto_max while rto_max should be larger than rto_min. Add two proc_handler for the checking. Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11sctp: check the rto_min and rto_max in setsockoptwangweidong1-10/+22
When we set 0 to rto_min or rto_max, just not change the value. Also we should check the rto_min > rto_max. Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11ipv6: do not erase dst address with flow label destinationFlorent Fourcot6-6/+0
This patch is following b579035ff766c9412e2b92abf5cab794bff102b6 "ipv6: remove old conditions on flow label sharing" Since there is no reason to restrict a label to a destination, we should not erase the destination value of a socket with the value contained in the flow label storage. This patch allows to really have the same flow label to more than one destination. Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11sctp: properly latch and use autoclose value from sock to associationNeil Horman5-17/+13
Currently, sctp associations latch a sockets autoclose value to an association at association init time, subject to capping constraints from the max_autoclose sysctl value. This leads to an odd situation where an application may set a socket level autoclose timeout, but sliently sctp will limit the autoclose timeout to something less than that. Fix this by modifying the autoclose setsockopt function to check the limit, cap it and warn the user via syslog that the timeout is capped. This will allow getsockopt to return valid autoclose timeout values that reflect what subsequent associations actually use. While were at it, also elimintate the assoc->autoclose variable, it duplicates whats in the timeout array, which leads to multiple sources for the same information, that may differ (as the former isn't subject to any capping). This gives us the timeout information in a canonical place and saves some space in the association structure as well. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> CC: Wang Weidong <wangweidong1@huawei.com> CC: David Miller <davem@davemloft.net> CC: Vlad Yasevich <vyasevich@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'tipc'David S. Miller2-6/+12
Jon Maloy says: ==================== tipc: corrections related to tasklet job mechanism These commits correct two bugs related to tipc' service for launching functions for asynchronous execution in a separate tasklet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tipc: protect handler_enabled variable with qitem_lock spin lockYing Xue1-3/+8
'handler_enabled' is a global flag indicating whether the TIPC signal handling service is enabled or not. The lack of lock protection for this flag incurs a risk for contention, so that a tipc_k_signal() call might queue a signal handler to a destroyed signal queue, with unpredictable results. To correct this, we let the already existing 'qitem_lock' protect the flag, as it already does with the queue itself. This way, we ensure that the flag always is consistent across all cores. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tipc: correct the order of stopping services at rmmodJon Paul Maloy1-3/+4
The 'signal handler' service in TIPC is a mechanism that makes it possible to postpone execution of functions, by launcing them into a job queue for execution in a separate tasklet, independent of the launching execution thread. When we do rmmod on the tipc module, this service is stopped after the network service. At the same time, the stopping of the network service may itself launch jobs for execution, with the risk that these functions may be scheduled for execution after the data structures meant to be accessed by the job have already been deleted. We have seen this happen, most often resulting in an oops. This commit ensures that the signal handler is the very first to be stopped when TIPC is shut down, so there are no surprises during the cleanup of the other services. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0Nat Gurumoorthy1-0/+3
The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: Revert macvtap/tun truncation signalling changes.David S. Miller2-26/+24
Jason Wang and Michael S. Tsirkin are still discussing how to properly fix this. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11macvtap: signal truncated packetsJason Wang1-13/+14
macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the truncated checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tun: unbreak truncated packet signallingJason Wang1-11/+12
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532 (tuntap: hardware vlan tx support) breaks the truncated packet signal by never return a length greater than iov length in tun_put_user(). This patch fixes this by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of iov length. Reported-by: Vlad Yasevich <vyasevich@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11vxlan: release rt when found circular routeFan Du1-1/+1
Otherwise causing dst memory leakage. Have Checked all other type tunnel device transmit implementation, no such things happens anymore. Signed-off-by: Fan Du <fan.du@windriver.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: unix: allow set_peek_off to failSasha Levin3-4/+8
unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'sfc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller6-23/+101
Ben Hutchings says: ==================== Several fixes for the PTP hardware support added in 3.7: 1. Fix filtering of PTP packets on the TX path to be robust against bad header lengths. 2. Limit logging on the RX path in case of a PTP packet flood, partly from Laurence Evans. 3. Disable PTP hardware when the interface is down so that we don't receive RX timestamp events, from Alexandre Rames. 4. Maintain clock frequency adjustment when a time offset is applied. Also fixes for the SFC9100 family support added in 3.12: 5. Take the RX prefix length into account when applying NET_IP_ALIGN, from Andrew Rybchenko. 6. Work around a bug that breaks communication between the driver and firmware, from Robert Stonehouse. Please also queue these up for the appropriate stable branches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11nfsd: when reusing an existing repcache entry, unhash it firstJeff Layton1-1/+8
The DRC code will attempt to reuse an existing, expired cache entry in preference to allocating a new one. It'll then search the cache, and if it gets a hit it'll then free the cache entry that it was going to reuse. The cache code doesn't unhash the entry that it's going to reuse however, so it's possible for it end up designating an entry for reuse and then subsequently freeing the same entry after it finds it. This leads it to a later use-after-free situation and usually some list corruption warnings or an oops. Fix this by simply unhashing the entry that we intend to reuse. That will mean that it's not findable via a search and should prevent this situation from occurring. Cc: stable@vger.kernel.org # v3.10+ Reported-by: Christoph Hellwig <hch@infradead.org> Reported-by: g. artim <gartim@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-12-11dm stats: initialize read-only module parameterMikulas Patocka1-0/+1
The module parameter stats_current_allocated_bytes in dm-mod is read-only. This parameter informs the user about memory consumption. It is not supposed to be changed by the user. However, despite being read-only, this parameter can be set on modprobe or insmod command line: modprobe dm-mod stats_current_allocated_bytes=12345 The kernel doesn't expect that this variable can be non-zero at module initialization and if the user sets it, it results in warning. This patch initializes the variable in the module init routine, so that user-supplied value is ignored. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.12+
2013-12-11dm bufio: initialize read-only module parametersMikulas Patocka1-0/+5
Some module parameters in dm-bufio are read-only. These parameters inform the user about memory consumption. They are not supposed to be changed by the user. However, despite being read-only, these parameters can be set on modprobe or insmod command line, for example: modprobe dm-bufio current_allocated_bytes=12345 The kernel doesn't expect that these variables can be non-zero at module initialization and if the user sets them, it results in BUG. This patch initializes the variables in the module init routine, so that user-supplied values are ignored. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.2+
2013-12-11x86, efi: Don't use (U)EFI time services on 32 bitMatthew Garrett1-7/+0
UEFI time services are often broken once we're in virtual mode. We were already refusing to use them on 64-bit systems, but it turns out that they're also broken on some 32-bit firmware, including the Dell Venue. Disable them for now, we can revisit once we have the 1:1 mappings code incorporated. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Link: http://lkml.kernel.org/r/1385754283-2464-1-git-send-email-matthew.garrett@nebula.com Cc: <stable@vger.kernel.org> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-12-11net: allwinner: emac: Add missing free_irqMaxime Ripard1-2/+3
The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11x86, build, icc: Remove uninitialized_var() from compiler-intel.hH. Peter Anvin1-2/+0
When compiling with icc, <linux/compiler-gcc.h> ends up included because the icc environment defines __GNUC__. Thus, we neither need nor want to have this macro defined in both compiler-gcc.h and compiler-intel.h, and the fact that they are inconsistent just makes the compiler spew warnings. Reported-by: Sunil K. Pandey <sunil.k.pandey@intel.com> Cc: Kevin B. Smith <kevin.b.smith@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-0mbwou1zt7pafij09b897lg3@git.kernel.org Cc: <stable@vger.kernel.org>
2013-12-11inet: fix NULL pointer Oops in fib(6)_rule_suppressStefan Tomanek2-2/+9
This changes ensures that the routing entry investigated by the suppress function actually does point to a device struct before following that pointer, fixing a possible kernel oops situation when verifying the interface group associated with a routing table entry. According to Daniel Golle, this Oops can be triggered by a user process trying to establish an outgoing IPv6 connection while having no real IPv6 connectivity set up (only autoassigned link-local addresses). Fixes: 6ef94cfafba15 ("fib_rules: add route suppression based on ifgroup") Reported-by: Daniel Golle <daniel.golle@gmail.com> Tested-by: Daniel Golle <daniel.golle@gmail.com> Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11drm/i915: don't enable VDD just to enable the panelPaulo Zanoni1-2/+0
We just don't need this. This saves 250ms from every modeset on my machine. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 00:18:45 +0300