summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-05-02Merge tag 'thermal-6.9-rc7' of ↵Linus Torvalds1-14/+45
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Fix a memory leak and a few locking issues (that may cause the kernel to crash in principle if all goes wrong) in the thermal debug code introduced during the 6.8 development cycle" * tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/debugfs: Prevent use-after-free from occurring after cdev removal thermal/debugfs: Fix two locking issues with thermal zone debug thermal/debugfs: Free all thermal zone debug memory on zone removal
2024-05-02Merge tag 'net-6.9-rc7' of ↵Linus Torvalds49-193/+378
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Relatively calm week, likely due to public holiday in most places. No known outstanding regressions. Current release - regressions: - rxrpc: fix wrong alignmask in __page_frag_alloc_align() - eth: e1000e: change usleep_range to udelay in PHY mdic access Previous releases - regressions: - gro: fix udp bad offset in socket lookup - bpf: fix incorrect runtime stat for arm64 - tipc: fix UAF in error path - netfs: fix a potential infinite loop in extract_user_to_sg() - eth: ice: ensure the copied buf is NUL terminated - eth: qeth: fix kernel panic after setting hsuid Previous releases - always broken: - bpf: - verifier: prevent userspace memory access - xdp: use flags field to disambiguate broadcast redirect - bridge: fix multicast-to-unicast with fraglist GSO - mptcp: ensure snd_nxt is properly initialized on connect - nsh: fix outer header access in nsh_gso_segment(). - eth: bcmgenet: fix racing registers access - eth: vxlan: fix stats counters. Misc: - a bunch of MAINTAINERS file updates" * tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) MAINTAINERS: mark MYRICOM MYRI-10G as Orphan MAINTAINERS: remove Ariel Elior net: gro: add flush check in udp_gro_receive_segment net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb ipv4: Fix uninit-value access in __ip_make_skb() s390/qeth: Fix kernel panic after setting hsuid vxlan: Pull inner IP header in vxlan_rcv(). tipc: fix a possible memleak in tipc_buf_append tipc: fix UAF in error path rxrpc: Clients must accept conn from any address net: core: reject skb_copy(_expand) for fraglist GSO skbs net: bridge: fix multicast-to-unicast with fraglist GSO mptcp: ensure snd_nxt is properly initialized on connect e1000e: change usleep_range to udelay in PHY mdic access net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341 cxgb4: Properly lock TX queue for the selftest. rxrpc: Fix using alignmask being zero for __page_frag_alloc_align() vxlan: Add missing VNI filter counter update in arp_reduce(). vxlan: Fix racy device stats updates. net: qede: use return from qede_parse_actions() ...
2024-05-02Merge commit '50abcc179e0c9ca667feb223b26ea406d5c4c556' of ↵Jens Axboe10-38/+65
git://git.infradead.org/nvme into block-6.9 Pull NVMe fixes from Keith. * git://git.infradead.org/nvme: nvme-tcp: strict pdu pacing to avoid send stalls on TLS nvmet: fix nvme status code when namespace is disabled nvmet-tcp: fix possible memory leak when tearing down a controller nvme: cancel pending I/O if nvme controller is in terminal state nvmet-auth: replace pr_debug() with pr_err() to report an error. nvmet-auth: return the error code to the nvmet_auth_host_hash() callers nvme: find numa distance only if controller has valid numa id nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
2024-05-02swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=yWill Deacon1-0/+1
Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following crash when initialising the restricted pools at boot-time: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 | Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP | pc : rmem_swiotlb_device_init+0xfc/0x1ec | lr : rmem_swiotlb_device_init+0xf0/0x1ec | Call trace: | rmem_swiotlb_device_init+0xfc/0x1ec | of_reserved_mem_device_init_by_idx+0x18c/0x238 | of_dma_configure_id+0x31c/0x33c | platform_dma_configure+0x34/0x80 faddr2line reveals that the crash is in the list validation code: include/linux/list.h:83 include/linux/rculist.h:79 include/linux/rculist.h:106 kernel/dma/swiotlb.c:306 kernel/dma/swiotlb.c:1695 because add_mem_pool() is trying to list_add_rcu() to a NULL 'mem->pools'. Fix the crash by initialising the 'mem->pools' list_head in rmem_swiotlb_device_init() before calling add_mem_pool(). Reported-by: Nikita Ioffe <ioffe@google.com> Tested-by: Nikita Ioffe <ioffe@google.com> Fixes: 1aaa736815eb ("swiotlb: allocate a new memory pool when existing pools are full") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-05-02MAINTAINERS: mark MYRICOM MYRI-10G as OrphanJakub Kicinski1-2/+1
Chris's email address bounces and lore hasn't seen an email from anyone with his name for almost a decade. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430233532.1356982-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-02MAINTAINERS: remove Ariel EliorJakub Kicinski1-3/+0
aelior@marvell.com bounces, we haven't seen Ariel on lore since March 2022. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240430233305.1356105-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-02Merge branch 'net-gro-add-flush-flush_id-checks-and-fix-wrong-offset-in-udp'Paolo Abeni9-5/+33
Richard Gobert says: ==================== net: gro: add flush/flush_id checks and fix wrong offset in udp This series fixes a bug in the complete phase of UDP in GRO, in which socket lookup fails due to using network_header when parsing encapsulated packets. The fix is to add network_offset and inner_network_offset to napi_gro_cb and use these offsets for socket lookup. In addition p->flush/flush_id should be checked in all UDP flows. The same logic from tcp_gro_receive is applied for all flows in udp_gro_receive_segment. This prevents packets with mismatching network headers (flush/flush_id turned on) from merging in UDP GRO. The original series includes a change to vxlan test which adds the local parameter to prevent similar future bugs. I plan to submit it separately to net-next. This series is part of a previously submitted series to net-next: https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/ v3 -> v4: - Store network offsets, and use them only in udp_gro_complete flows - Correct commit hash used in Fixes tag - v3: https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/ v2 -> v3: - Add network_offsets and fix udp bug in a single commit to make backporting easier - Write to inner_network_offset in {inet,ipv6}_gro_receive - Use network_offsets union in tcp[46]_gro_complete as well - v2: https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/ v1 -> v2: - Use network_offsets instead of p_poff param as suggested by Willem - Check flush before postpull, and for all UDP GRO flows - v1: https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240430143555.126083-1-richardbgobert@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-02net: gro: add flush check in udp_gro_receive_segmentRichard Gobert1-1/+11
GRO-GSO path is supposed to be transparent and as such L3 flush checks are relevant to all UDP flows merging in GRO. This patch uses the same logic and code from tcp_gro_receive, terminating merge if flush is non zero. Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-02net: gro: fix udp bad offset in socket lookup by adding ↵Richard Gobert9-4/+22
{inner_}network_offset to napi_gro_cb Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp: additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the complete phase of gro. The functions always return skb->network_header, which in the case of encapsulated packets at the gro complete phase, is always set to the innermost L3 of the packet. That means that calling {ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_ L3/L4 may return an unexpected value. This incorrect usage leads to a bug in GRO's UDP socket lookup. udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These *_hdr functions return network_header which will point to the innermost L3, resulting in the wrong offset being used in __udp{4,6}_lib_lookup with encapsulated packets. This patch adds network_offset and inner_network_offset to napi_gro_cb, and makes sure both are set correctly. To fix the issue, network_offsets union is used inside napi_gro_cb, in which both the outer and the inner network offsets are saved. Reproduction example: Endpoint configuration example (fou + local address bind) # ip fou add port 6666 ipproto 4 # ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip # ip link set tun1 up # ip a add 1.1.1.2/24 dev tun1 Netperf TCP_STREAM result on net-next before patch is applied: net-next main, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.28 2.37 net-next main, GRO disabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2745.06 patch applied, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2877.38 Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-02ipv4: Fix uninit-value access in __ip_make_skb()Shigeru Yoshida2-1/+4
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 Fixes: 99e5acae193e ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-02drm/panel: ili9341: Use predefined error codesAndy Shevchenko1-2/+2
In one case the -1 is returned which is quite confusing code for the wrong device ID, in another the ret is returning instead of plain 0 that also confusing as readed may ask the possible meaning of positive codes, which are never the case there. Convert both to use explicit predefined error codes to make it clear what's going on there. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
2024-05-02drm/panel: ili9341: Respect deferred probeAndy Shevchenko1-2/+2
GPIO controller might not be available when driver is being probed. There are plenty of reasons why, one of which is deferred probe. Since GPIOs are optional, return any error code we got to the upper layer, including deferred probe. With that in mind, use dev_err_probe() in order to avoid spamming the logs. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
2024-05-02drm/panel: ili9341: Correct use of device property APIsAndy Shevchenko2-3/+4
It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com
2024-05-02s390/qeth: Fix kernel panic after setting hsuidAlexandra Winter1-34/+27
Symptom: When the hsuid attribute is set for the first time on an IQD Layer3 device while the corresponding network interface is already UP, the kernel will try to execute a napi function pointer that is NULL. Example: --------------------------------------------------------------------------- [ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP [ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod qdio ccwgroup pkey zcrypt [ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1 [ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR) [ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2) [ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000 [ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80 [ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8 [ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68 [ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal >0000000000000002: 0000 illegal 0000000000000004: 0000 illegal 0000000000000006: 0000 illegal 0000000000000008: 0000 illegal 000000000000000a: 0000 illegal 000000000000000c: 0000 illegal 000000000000000e: 0000 illegal [ 2057.572800] Call Trace: [ 2057.572801] ([<00000000ec639700>] 0xec639700) [ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398 [ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0 [ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58 [ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60) [ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98 [ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70 [ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv] [ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv] [ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv] [ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8 [ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348 [ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8 [ 2057.572843] Last Breaking-Event-Address: [ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8 [ 2057.572846] [ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt ------------------------------------------------------------------------------------------- Analysis: There is one napi structure per out_q: card->qdio.out_qs[i].napi The napi.poll functions are set during qeth_open(). Since commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") qeth_set_offline()/qeth_set_online() no longer call dev_close()/ dev_open(). So if qeth_free_qdio_queues() cleared card->qdio.out_qs[i].napi.poll while the network interface was UP and the card was offline, they are not set again. Reproduction: chzdev -e $devno layer2=0 ip link set dev $network_interface up echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online -> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...) Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid is set for the first time or when it is removed. Workarounds: - Set hsuid before setting the device online for the first time or - Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno; to set hsuid on an existing device. (this will remove and recreate the network interface) Fix: There is no need to free the output queues when a completion queue is added or removed. card->qdio.state now indicates whether the inbound buffer pool and the outbound queues are allocated. card->qdio.c_q indicates whether a CQ is allocated. Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-02ALSA: hda/realtek: Fix build error without CONFIG_PMTakashi Iwai1-1/+3
The alc_spec.power_hook is defined only with CONFIG_PM, and the recent fix overlooked it, resulting in a build error without CONFIG_PM. Fix it with the simple ifdef and set __maybe_unused for the function. We may drop the whole CONFIG_PM dependency there, but it should be done in a separate cleanup patch later. Fixes: 1e707769df07 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405012104.Dr7h318W-lkp@intel.com/ Message-ID: <20240502062442.30545-1-tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-02vxlan: Pull inner IP header in vxlan_rcv().Guillaume Nault1-1/+18
Ensure the inner IP header is part of skb's linear data before reading its ECN bits. Otherwise we might read garbage. One symptom is the system erroneously logging errors like "vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx". Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see commit 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") for example). So let's reuse the same code structure for consistency. Maybe we'll can add a common helper in the future. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02tipc: fix a possible memleak in tipc_buf_appendXin Long1-1/+1
__skb_linearize() doesn't free the skb when it fails, so move '*buf = NULL' after __skb_linearize(), so that the skb can be freed on the err path. Fixes: b7df21cf1b79 ("tipc: skb_linearize the head skb when reassembling msgs") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02tipc: fix UAF in error pathPaolo Abeni1-1/+5
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported a UAF in the tipc_buf_append() error path: BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 Read of size 8 at addr ffff88804d2a7c80 by task poc/8034 CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 Call Trace: <IRQ> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:377 print_report+0xc4/0x620 linux/mm/kasan/report.c:488 kasan_report+0xda/0x110 linux/mm/kasan/report.c:601 kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026 skb_release_all linux/net/core/skbuff.c:1094 __kfree_skb linux/net/core/skbuff.c:1108 kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144 kfree_skb linux/./include/linux/skbuff.h:1244 tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186 tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324 tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824 tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159 tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390 udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346 __udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422 ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254 dst_input linux/./include/net/dst.h:461 ip_rcv_finish linux/net/ipv4/ip_input.c:449 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534 __netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648 process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976 __napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576 napi_poll linux/net/core/dev.c:6645 net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781 __do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553 do_softirq linux/kernel/softirq.c:454 do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441 </IRQ> <TASK> __local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381 local_bh_enable linux/./include/linux/bottom_half.h:33 rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851 __dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378 dev_queue_xmit linux/./include/linux/netdevice.h:3169 neigh_hh_output linux/./include/net/neighbour.h:526 neigh_output linux/./include/net/neighbour.h:540 ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235 __ip_finish_output linux/net/ipv4/ip_output.c:313 __ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323 NF_HOOK_COND linux/./include/linux/netfilter.h:303 ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433 dst_output linux/./include/net/dst.h:451 ip_local_out linux/net/ipv4/ip_output.c:129 ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492 udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963 udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250 inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850 sock_sendmsg_nosec linux/net/socket.c:730 __sock_sendmsg linux/net/socket.c:745 __sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191 __do_sys_sendto linux/net/socket.c:2203 __se_sys_sendto linux/net/socket.c:2199 __x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199 do_syscall_x64 linux/arch/x86/entry/common.c:52 do_syscall_64+0xd8/0x270 linux/arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 linux/arch/x86/entry/entry_64.S:120 RIP: 0033:0x7f3434974f29 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 37 8f 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007fff9154f2b8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3434974f29 RDX: 00000000000032c8 RSI: 00007fff9154f300 RDI: 0000000000000003 RBP: 00007fff915532e0 R08: 00007fff91553360 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000212 R12: 000055ed86d261d0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> In the critical scenario, either the relevant skb is freed or its ownership is transferred into a frag_lists. In both cases, the cleanup code must not free it again: we need to clear the skb reference earlier. Fixes: 1149557d64c9 ("tipc: eliminate unnecessary linearization of incoming buffers") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23852 Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02rxrpc: Clients must accept conn from any addressJeffrey Altman1-7/+2
The find connection logic of Transarc's Rx was modified in the mid-1990s to support multi-homed servers which might send a response packet from an address other than the destination address in the received packet. The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION) were altered to permit acceptance of a packet from any address provided that the port number was unchanged and all of the connection identifiers matched (Epoch, CID, SecurityClass, ...). This change applies the same rules to the Linux implementation which makes it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Jeffrey Altman <jaltman@auristor.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Link: https://lore.kernel.org/r/20240419163057.4141728-1-marc.dionne@auristor.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-01Merge tag 'asoc-fix-v6.9-rc6' of ↵Takashi Iwai788-4634/+10154
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.9 This is much larger than is ideal, partly due to your holiday but also due to several vendors having come in with relatively large fixes at similar times. It's all driver specific stuff. The meson fixes from Jerome fix some rare timing issues with blocking operations happening in triggers, plus the continuous clock support which fixes clocking for some platforms. The SOF series from Peter builds to the fix to avoid spurious resets of ChainDMA which triggered errors in cleanup paths with both PulseAudio and PipeWire, and there's also some simple new debugfs files from Pierre which make support a lot eaiser.
2024-05-01Merge tag 'regulator-fix-v6.9-rc6' of ↵Linus Torvalds5-14/+27
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "There's a few simple driver specific fixes here, plus some core cleanups from Matti which fix issues found with client drivers due to the API being confusing. The two fixes for the stubs provide more constructive behaviour with !REGULATOR configurations, issues were noticed with some hwmon drivers which would otherwise have needed confusing bodges in the users. The irq_helpers fix to duplicate the provided name for the interrupt controller was found because a driver got this wrong and it's again a case where the core is the sensible place to put the fix" * tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: change devm_regulator_get_enable_optional() stub to return Ok regulator: change stubbed devm_regulator_get_enable to return Ok regulator: vqmmc-ipq4019: fix module autoloading regulator: qcom-refgen: fix module autoloading regulator: mt6360: De-capitalize devicetree regulator subnodes regulator: irq_helpers: duplicate IRQ name
2024-05-01drm/xe/vm: prevent UAF in rebind_work_func()Matthew Auld1-0/+3
We flush the rebind worker during the vm close phase, however in places like preempt_fence_work_func() we seem to queue the rebind worker without first checking if the vm has already been closed. The concern here is the vm being closed with the worker flushed, but then being rearmed later, which looks like potential uaf, since there is no actual refcounting to track the queued worker. We can't take the vm->lock here in preempt_rebind_work_func() to first check if the vm is closed since that will deadlock, so instead flush the worker again when the vm refcount reaches zero. v2: - Grabbing vm->lock in the preempt worker creates a deadlock, so checking the closed state is tricky. Instead flush the worker when the refcount reaches zero. It should be impossible to queue the preempt worker without already holding vm ref. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240423074721.119633-4-matthew.auld@intel.com (cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-05-01drm/amd/display: Disable panel replay by default for nowMario Limonciello1-9/+12
Panel replay was enabled by default in commit 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case"), but it isn't working properly at least on some BOE and AUO panels. Instead of being static the screen is solid black when active. As it's a new feature that was just introduced that regressed VRR disable it for now so that problem can be properly root caused. Cc: Tom Chung <chiahsuan.chung@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344 Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01net: core: reject skb_copy(_expand) for fraglist GSO skbsFelix Fietkau1-8/+19
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become invalid. Return NULL if such an skb is passed to skb_copy or skb_copy_expand, in order to prevent a crash on a potential later call to skb_gso_segment. Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-01net: bridge: fix multicast-to-unicast with fraglist GSOFelix Fietkau1-1/+1
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns an invalid linearized skb. This code only needs to change the ethernet header, so pskb_copy is the right function to call here. Fixes: 6db6f0eae605 ("bridge: multicast to unicast") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-01nvme-tcp: strict pdu pacing to avoid send stalls on TLSHannes Reinecke1-2/+8
TLS requires a strict pdu pacing via MSG_EOR to signal the end of a record and subsequent encryption. If we do not set MSG_EOR at the end of a sequence the record won't be closed, encryption doesn't start, and we end up with a send stall as the message will never be passed on to the TCP layer. So do not check for the queue status when TLS is enabled but rather make the MSG_MORE setting dependent on the current request only. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-05-01nvmet: fix nvme status code when namespace is disabledSagi Grimberg3-1/+18
If the user disabled a nvmet namespace, it is removed from the subsystem namespaces list. When nvmet processes a command directed to an nsid that was disabled, it cannot differentiate between a nsid that is disabled vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS with the dnr bit set. This translates to a non-retryable status for the host, which translates to a user error. We should expect disabled namespaces to not cause an I/O error in a multipath environment. Address this by searching a configfs item for the namespace nvmet failed to find, and if we found one, conclude that the namespace is disabled (perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case and keep DNR bit cleared. Reported-by: Jirong Feng <jirong.feng@easystack.cn> Tested-by: Jirong Feng <jirong.feng@easystack.cn> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-05-01nvmet-tcp: fix possible memory leak when tearing down a controllerSagi Grimberg1-7/+4
When we teardown the controller, we wait for pending I/Os to complete (sq->ref on all queues to drop to zero) and then we go over the commands, and free their command buffers in case they are still fetching data from the host (e.g. processing nvme writes) and have yet to take a reference on the sq. However, we may miss the case where commands have failed before executing and are queued for sending a response, but will never occur because the queue socket is already down. In this case we may miss deallocating command buffers. Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is idempotent anyways. Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-05-01nvme: cancel pending I/O if nvme controller is in terminal stateNilay Shroff3-22/+28
While I/O is running, if the pci bus error occurs then in-flight I/O can not complete. Worst, if at this time, user (logically) hot-unplug the nvme disk then the nvme_remove() code path can't forward progress until in-flight I/O is cancelled. So these sequence of events may potentially hang hot-unplug code path indefinitely. This patch helps cancel the pending/in-flight I/O from the nvme request timeout handler in case the nvme controller is in the terminal (DEAD/DELETING/DELETING_NOIO) state and that helps nvme_remove() code path forward progress and finish successfully. Link: https://lore.kernel.org/all/199be893-5dfa-41e5-b6f2-40ac90ebccc4@linux.ibm.com/ Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-05-01nvmet-auth: replace pr_debug() with pr_err() to report an error.Maurizio Lombardi1-3/+3
In nvmet_auth_host_hash(), if a mismatch is detected in the hash length the kernel should print an error. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-05-01nvmet-auth: return the error code to the nvmet_auth_host_hash() callersMaurizio Lombardi1-1/+1
If the nvmet_auth_host_hash() function fails, the error code should be returned to its callers. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-05-01nvme: find numa distance only if controller has valid numa idNilay Shroff1-1/+2
On system where native nvme multipath is configured and iopolicy is set to numa but the nvme controller numa node id is undefined or -1 (NUMA_NO_NODE) then avoid calculating node distance for finding optimal io path. In such case we may access numa distance table with invalid index and that may potentially refer to incorrect memory. So this patch ensures that if the nvme controller numa node id is -1 then instead of calculating node distance for finding optimal io path, we set the numa node distance of such controller to default 10 (LOCAL_DISTANCE). Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/ Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-05-01s390/paes: Reestablish retry loop in paesHarald Freudenberger1-2/+13
With commit ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") the retry loop to retry derivation of a protected key from a secure key has been removed. This was based on the assumption that theses retries are not needed any more as proper retries are done in the zcrypt layer. However, tests have revealed that there exist some cases with master key change in the HSM and immediately (< 1 second) attempt to derive a protected key from a secure key with exact this HSM may eventually fail. The low level functions in zcrypt_ccamisc.c and zcrypt_ep11misc.c detect and report this temporary failure and report it to the caller as -EBUSY. The re-established retry loop in the paes implementation catches exactly this -EBUSY and eventually may run some retries. Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-01s390/zcrypt: Use EBUSY to indicate temp unavailabilityHarald Freudenberger1-3/+3
Use -EBUSY instead of -EAGAIN in zcrypt_ccamisc.c in cases where the CCA card returns 8/2290 to indicate a temporarily unavailability of this function. Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-01s390/zcrypt: Handle ep11 cprb return codeHarald Freudenberger1-0/+46
An EP11 reply cprb contains a field ret_code which may hold an error code different than the error code stored in the payload of the cprb. As of now all the EP11 misc functions do not evaluate this field but focus on the error code in the payload. Before checking the payload error, first the cprb error field should be evaluated which is introduced with this patch. If the return code value 0x000c0003 is seen, this indicates a busy situation which is reflected by -EBUSY in the zcrpyt_ep11misc.c low level function. A higher level caller should consider to retry after waiting a dedicated duration (say 1 second). Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-01s390/zcrypt: Fix wrong format string in debug feature printoutHarald Freudenberger1-1/+1
Fix wrong format string debug feature: %04x was used to print out a 32 bit value. - changed to %08x. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-05-01x86/mm: Remove broken vsyscall emulation code from the page fault codeLinus Torvalds3-59/+3
The syzbot-reported stack trace from hell in this discussion thread actually has three nested page faults: https://lore.kernel.org/r/000000000000d5f4fc0616e816d4@google.com ... and I think that's actually the important thing here: - the first page fault is from user space, and triggers the vsyscall emulation. - the second page fault is from __do_sys_gettimeofday(), and that should just have caused the exception that then sets the return value to -EFAULT - the third nested page fault is due to _raw_spin_unlock_irqrestore() -> preempt_schedule() -> trace_sched_switch(), which then causes a BPF trace program to run, which does that bpf_probe_read_compat(), which causes that page fault under pagefault_disable(). It's quite the nasty backtrace, and there's a lot going on. The problem is literally the vsyscall emulation, which sets current->thread.sig_on_uaccess_err = 1; and that causes the fixup_exception() code to send the signal *despite* the exception being caught. And I think that is in fact completely bogus. It's completely bogus exactly because it sends that signal even when it *shouldn't* be sent - like for the BPF user mode trace gathering. In other words, I think the whole "sig_on_uaccess_err" thing is entirely broken, because it makes any nested page-faults do all the wrong things. Now, arguably, I don't think anybody should enable vsyscall emulation any more, but this test case clearly does. I think we should just make the "send SIGSEGV" be something that the vsyscall emulation does on its own, not this broken per-thread state for something that isn't actually per thread. The x86 page fault code actually tried to deal with the "incorrect nesting" by having that: if (in_interrupt()) return; which ignores the sig_on_uaccess_err case when it happens in interrupts, but as shown by this example, these nested page faults do not need to be about interrupts at all. IOW, I think the only right thing is to remove that horrendously broken code. The attached patch looks like the ObviouslyCorrect(tm) thing to do. NOTE! This broken code goes back to this commit in 2011: 4fc3490114bb ("x86-64: Set siginfo and context on vsyscall emulation faults") ... and back then the reason was to get all the siginfo details right. Honestly, I do not for a moment believe that it's worth getting the siginfo details right here, but part of the commit says: This fixes issues with UML when vsyscall=emulate. ... and so my patch to remove this garbage will probably break UML in this situation. I do not believe that anybody should be running with vsyscall=emulate in 2024 in the first place, much less if you are doing things like UML. But let's see if somebody screams. Reported-and-tested-by: syzbot+83e7f982ca045ab4405c@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/CAHk-=wh9D6f7HUkDgZHKmDCHUQmp+Co89GP+b8+z+G56BKeyNg@mail.gmail.com
2024-05-01spi: fix null pointer dereference within spi_syncMans Rullgard1-0/+1
If spi_sync() is called with the non-empty queue and the same spi_message is then reused, the complete callback for the message remains set while the context is cleared, leading to a null pointer dereference when the callback is invoked from spi_finalize_current_message(). With function inlining disabled, the call stack might look like this: _raw_spin_lock_irqsave from complete_with_flags+0x18/0x58 complete_with_flags from spi_complete+0x8/0xc spi_complete from spi_finalize_current_message+0xec/0x184 spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474 spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230 __spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4 __spi_transfer_message_noqueue from __spi_sync+0x204/0x248 __spi_sync from spi_sync+0x24/0x3c spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd] mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154 _regmap_raw_read from _regmap_bus_read+0x44/0x70 _regmap_bus_read from _regmap_read+0x60/0xd8 _regmap_read from regmap_read+0x3c/0x5c regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd] mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd] mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x118/0x1f4 irq_thread from kthread+0xd8/0xf4 kthread from ret_from_fork+0x14/0x28 Fix this by also setting message->complete to NULL when the transfer is complete. Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/r/20240430182705.13019-1-mans@mansr.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-05-01drm/amdgpu: fix doorbell regressionShashank Sharma1-1/+1
This patch adds a missed handling of PL domain doorbell while handling VRAM faults. Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults") Reviewed-by: Christian Koenig <christian.koenig@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Arvind Yadav <arvind.yadav@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01drm/amdkfd: Flush the process wq before creating a kfd_processLancelot SIX1-0/+8
There is a race condition when re-creating a kfd_process for a process. This has been observed when a process under the debugger executes exec(3). In this scenario: - The process executes exec. - This will eventually release the process's mm, which will cause the kfd_process object associated with the process to be freed (kfd_process_free_notifier decrements the reference count to the kfd_process to 0). This causes kfd_process_ref_release to enqueue kfd_process_wq_release to the kfd_process_wq. - The debugger receives the PTRACE_EVENT_EXEC notification, and tries to re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE). - When handling this request, KFD tries to re-create a kfd_process. This eventually calls kfd_create_process and kobject_init_and_add. At this point the call to kobject_init_and_add can fail because the old kfd_process.kobj has not been freed yet by kfd_process_wq_release. This patch proposes to avoid this race by making sure to drain kfd_process_wq before creating a new kfd_process object. This way, we know that any cleanup task is done executing when we reach kobject_init_and_add. Signed-off-by: Lancelot SIX <lancelot.six@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01drm/amd/display: Disable seamless boot on 128b/132b encodingSung Joon Kim1-0/+3
[why] preOS will not support display mode programming and link training for UHBR rates. [how] If we detect a sink that's UHBR capable, disable seamless boot Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01mptcp: ensure snd_nxt is properly initialized on connectPaolo Abeni1-0/+3
Christoph reported a splat hinting at a corrupted snd_una: WARNING: CPU: 1 PID: 38 at net/mptcp/protocol.c:1005 __mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005 Modules linked in: CPU: 1 PID: 38 Comm: kworker/1:1 Not tainted 6.9.0-rc1-gbbeac67456c9 #59 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005 Code: be 06 01 00 00 bf 06 01 00 00 e8 a8 12 e7 fe e9 00 fe ff ff e8 8e 1a e7 fe 0f b7 ab 3e 02 00 00 e9 d3 fd ff ff e8 7d 1a e7 fe <0f> 0b 4c 8b bb e0 05 00 00 e9 74 fc ff ff e8 6a 1a e7 fe 0f 0b e9 RSP: 0018:ffffc9000013fd48 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8881029bd280 RCX: ffffffff82382fe4 RDX: ffff8881003cbd00 RSI: ffffffff823833c3 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888138ba8000 R13: 0000000000000106 R14: ffff8881029bd908 R15: ffff888126560000 FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f604a5dae38 CR3: 0000000101dac002 CR4: 0000000000170ef0 Call Trace: <TASK> __mptcp_clean_una_wakeup net/mptcp/protocol.c:1055 [inline] mptcp_clean_una_wakeup net/mptcp/protocol.c:1062 [inline] __mptcp_retrans+0x7f/0x7e0 net/mptcp/protocol.c:2615 mptcp_worker+0x434/0x740 net/mptcp/protocol.c:2767 process_one_work+0x1e0/0x560 kernel/workqueue.c:3254 process_scheduled_works kernel/workqueue.c:3335 [inline] worker_thread+0x3c7/0x640 kernel/workqueue.c:3416 kthread+0x121/0x170 kernel/kthread.c:388 ret_from_fork+0x44/0x50 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> When fallback to TCP happens early on a client socket, snd_nxt is not yet initialized and any incoming ack will copy such value into snd_una. If the mptcp worker (dumbly) tries mptcp-level re-injection after such ack, that would unconditionally trigger a send buffer cleanup using 'bad' snd_una values. We could easily disable re-injection for fallback sockets, but such dumb behavior already helped catching a few subtle issues and a very low to zero impact in practice. Instead address the issue always initializing snd_nxt (and write_seq, for consistency) at connect time. Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485 Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240429-upstream-net-20240429-mptcp-snd_nxt-init-connect-v1-1-59ceac0a7dcb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-01drm/amd/display: Fix DC mode screen flickering on DCN321Leo Ma1-3/+12
[Why && How] Screen flickering saw on 4K@60 eDP with high refresh rate external monitor when booting up in DC mode. DC Mode Capping is disabled which caused wrong UCLK being used. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01drm/amd/display: Add VCO speed parameter for DCN31 FPURodrigo Siqueira1-0/+2
Add VCO speed parameters in the bounding box array. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01e1000e: change usleep_range to udelay in PHY mdic accessVitaly Lifshits1-4/+4
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems"). The referenced commit used usleep_range inside the PHY access routines, which are sometimes called from an atomic context. This can lead to a kernel panic in some scenarios, such as cable disconnection and reconnection on vPro systems. Solve this by changing the usleep_range calls back to udelay. Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Cc: stable@vger.kernel.org Reported-by: Jérôme Carretero <cJ@zougloub.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740 Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/ Co-developed-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-01drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2Christian König3-28/+38
This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap. The basic problem here is that after the move the old location is simply not available any more. Some fixes were suggested, but essentially we should call the move notification before actually moving things because only this way we have the correct order for DMA-buf and VM move notifications as well. Also rework the statistic handling so that we don't update the eviction counter before the move. v2: add missing NULL check Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 94aeb4117343 ("drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3171 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-05-01drm/amd/display: Allocate zero bw after bw alloc enableMeenakshikumar Somasundaram1-1/+9
[Why] During DP tunnel creation, CM preallocates BW and reduces estimated BW of other DPIA. CM release preallocation only when allocation is complete. Display mode validation logic validates timings based on bw available per host router. In multi display setup, this causes bw allocation failure when allocation greater than estimated bw. [How] Do zero alloc to make the CM to release preallocation and update estimated BW correctly for all DPIAs per host router. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01drm/amd/display: Fix incorrect DSC instance for MSTHersen Wu1-12/+36
[Why] DSC debugfs, such as dp_dsc_clock_en_read, use aconnector->dc_link to find pipe_ctx for display. Displays connected to MST hub share the same dc_link. DSC instance is from pipe_ctx. This causes incorrect DSC instance for display connected to MST hub. [How] Add aconnector->sink check to find pipe_ctx. CC: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01drm/amd/display: Atom Integrated System Info v2_2 for DCN35Gabe Teeger1-0/+1
New request from KMD/VBIOS in order to support new UMA carveout model. This fixes a null dereference from accessing Ctx->dc_bios->integrated_info while it was NULL. DAL parses through the BIOS and extracts the necessary integrated_info but was missing a case for the new BIOS version 2.3. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341Marek Behún1-2/+2
The Topaz family (88E6141 and 88E6341) only support 256 Forwarding Information Tables. Fixes: a75961d0ebfd ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341") Fixes: 1558727a1c1b ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-26 20:20:14 +0300