summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-04-02Merge tag 'v4.1-rockchip-dts1' of ↵Olof Johansson8-0/+552
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: dts changes for 4.1" from Heiko Stuebner: This adds and enables the usbphy nodes on the rk3288 boards and enables the gmac on the firefly board. A new board the Popmetal-rk3288 is also added. And finally the pmic supplies for act8846 based boards are added, as the act8865/act8846 driver gained supply handling in the regulator tree. * tag 'v4.1-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: complete rk3288-evb pmic supplies ARM: dts: rockchip: add input supplies for the act8846 on Radxa Rock ARM: dts: add rk3288 PopMetal board dt-bindings: add root compatible property for PopMetal board ARM: dts: rockchip: enable gmac on rk3288-firefly ARM: dts: rockchip: enable usbphy on rk3288-firefly ARM: dts: rockchip: Enable usb PHY on rk3288-evb board ARM: dts: rockchip: add rk3288 usb PHY Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-02ARM: dts: fix typo in makefile for alpine-dbOlof Johansson1-1/+1
File uses dash in the filename, not underscore. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-16Merge tag 'arm-soc/for-4.1/devicetree-part-2' of ↵Arnd Bergmann3-0/+99
http://github.com/broadcom/stblinux into next/dt Pull "This pull request contains the following changes from Ray for Cygnus SoCs: from Florian Fainelli: - enable IOMUX, required for pinmux/pinctrl - enable GPIO, required for the GPIO driver - enable GPIO hook detection for BCM911360-based phone designs - enable PCIe controller for the bcm958300k designs * tag 'arm-soc/for-4.1/devicetree-part-2' of http://github.com/broadcom/stblinux: ARM: dts: enable PCIe support for Cygnus ARM: dts: cygnus: enable GPIO based hook detection ARM: dts: enable GPIO for Broadcom Cygnus ARM: dts: enable IOMUX for Broadcom Cygnus
2015-03-16ARM: dts: Alpine platform devicetreeTsahee Zidenberg3-0/+178
This patch introduces devicetree for the Alpine platform, and for a development board based on the same platform. Signed-off-by: Barak Wasserstrom <barak@annapurnalabs.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-13ARM: dts: enable PCIe support for CygnusRay Jui2-0/+50
Add PCIe device nodes in bcm-cygnus.dtsi but keep them disabled there. Only enable them for bcm958300k where PCIe interfaces are populated Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-13ARM: dts: rockchip: complete rk3288-evb pmic suppliesHeiko Stuebner3-0/+26
This adds the static vcc_sys regulator to the rk3288-evb, the missing rk808 supplies from it and all the supplies of the act8846 evb-variant. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-03-12Merge tag 'renesas-dt2-for-v4.1' of ↵Arnd Bergmann7-14/+136
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman: * ape6evm board - Configure GPIO keys as wake-up source - Enable pull-up for GPIO switches - Correct polarity of LEDs * r8a7791 SoC - Correct IPMMU-GP clock to device tree * r8a7794 SoC - Correct ethernet controller PHY IRQ * lager, koelsch and marzen boards - Add DU external pixel clock to DT * lager board - Add HDMI output support to DT * r8a7791 and r8a7790 SoCs - Tidy up SDHI register size in DT - Reference DMA channels for SDHI in DT * tag 'renesas-dt2-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: ape6evm dts: Configure the custom switch as wake-up source ARM: shmobile: ape6evm dts: Enable pull-up for GPIO switches ARM: shmobile: r8a7791: Fix IPMMU-GP clock to device tree ARM: shmobile: r8a7794: alt: Fix ethernet controller PHY IRQ line ARM: shmobile: lager: Add DU external pixel clocks to DT ARM: shmobile: koelsch: Add DU external pixel clocks to DT ARM: shmobile: marzen: Add DU external pixel clock to DT ARM: shmobile: ape6evm dts: Fix polarity of LEDs ARM: shmobile: lager: Add DU HDMI output support ARM: shmobile: r8a7791: Fix HSUSB clock to hp_clk from mp_clk ARM: shmobile: r8a7790: Fix HSUSB clock to hp_clk from mp_clk ARM: shmobile: r8a7791: tidyup SDHI register size on DTSI ARM: shmobile: r8a7790: tidyup SDHI register size on DTSI ARM: shmobile: r8a7791: Reference DMA channels in SDHI DT nodes ARM: shmobile: r8a7790: Reference DMA channels in SDHI DT nodes
2015-03-12Merge tag 'mvebu-dt-4.1' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann34-51/+1304
Pull "mvebu dt changes for v4.1 (part #1)" from Gregory CLEMENT: - fix SDHCI nodes on Armada 38x - add Linksys WRT1900AC (Mamba) support (including the Ethernet switch) - add several fixes and improvement for dove - enable GPIO fan alarm support for 2Big Network v2 - add several fixes about unit address - add support for Armada 39x SoC and board * tag 'mvebu-dt-4.1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add Device Tree files for Armada 39x SoC and board ARM: mvebu: fix unit address of MPIC nodes ARM: mvebu: use stdout-path in all armada-*.dts ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XP ARM: mvebu: add UART labels to Armada 375 ARM: mvebu: add missing UART labels on Armada 38x ARM: mvebu: fix usb@ unit address on Armada 38x to match register address ARM: mvebu: a385-db-ap: Enable the NAND ARM: ARMADA XP: WRT1900AC: Add support for the Ethernet switch ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2 ARM: mvebu: Fix MPIC unit address ARM: dts: dove: Add some more common pinctrl settings ARM: dts: dove: Add node labels for PCIe ports 0 and 1 ARM: dts: dove: Always include gpio and interrupt-controller headers ARM: dts: dove: Fix uart[23] reg property ARM: mvebu: add Linksys WRT1900AC (Mamba) support ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD ARM: mvebu: Update the SDHCI node on Armada 38x ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
2015-03-12Merge tag 'arm-soc/for-4.1/devicetree' of ↵Arnd Bergmann4-4/+136
http://github.com/broadcom/stblinux into next/dt Pull "Broadcom Device Tree changes for 4.1 #1" from Florian Fainelli: This pull request contains the following Broadcom SoCs Device Tree changes: - Jonathan adds support for the Broadcom Cygnus BCM958305K board - Rafal adds support for Netgear R8000 and fixes the default for power LEDs on Netgear R6250 * tag 'arm-soc/for-4.1/devicetree' of http://github.com/broadcom/stblinux: ARM: BCM5301X: Fix default state of power LEDs on Netgear R6250 ARM: BCM5301X: Add DT for Netgear R8000 ARM: dts: Enable Broadcom Cygnus BCM958305K
2015-03-12Merge tag 'at91-dt' of ↵Arnd Bergmann31-70/+702
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt Pull "First batch of DT changes for 4.1" into next/dt: - at91sam9x5 & EK board: ISI and camera sensors - at91sam9n12 & EK board: USB gadget nodes - sama5d3: typos, gpio-keys on Xplained board - sama5d4: i2c, leds, audio, ISI, crypto, pwm missing nodes - new sama5d4 xplained board * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (31 commits) ARM: at91/dt: sama5d4: add ISI dt support ARM: at91/dt: sama5d4: add pwm0 device node ARM: at91/dt: sama5d4: add aes, sha and tdes nodes ARM: at91: dt: sama5d4ek: enable audio ARM: at91: dt: sama5d4ek: add and enable wm8904 ARM: at91: dt: sama5d4ek: enable ssc0 ARM: at91: dt: sama5d4: add ssc nodes ARM: at91/dt: sama5d4 xplained: add i2c0 ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board ARM: at91/dt: sama5d4: add #{address, size}_cells properties for macb0 ARM: at91/dt: sama5d4ek: add leds in DT node ARM: at91/dt: add i2c1 declaration to sama5d4 ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not needed ARM: at91/dt: at91-sama5d3_xplained: add gpio-key pinctrl property ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals ARM: at91/dt: at91sam9n12ek: enable udp ARM: at91/dt: at91sam9n12: add udp device node ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640 ARM: at91: at91sam9x5ek/dts: add ov2640 support ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls ...
2015-03-10ARM: dts: cygnus: enable GPIO based hook detectionRay Jui1-0/+13
This enables GPIO based phone hook detection for Broadcom BCM911360 phone factor board (bcm911360_entphn) Signed-off-by: Ray Jui <rjui@broadcom.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-10ARM: dts: enable GPIO for Broadcom CygnusRay Jui1-0/+30
This enables all 3 GPIO controllers including the ASIU GPIO, the chipcommonG GPIO, and the ALWAYS-ON GPIO, for Broadcom Cygnus SoC Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Tested-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-10ARM: dts: enable IOMUX for Broadcom CygnusRay Jui1-0/+6
This enables the IOMUX support for Broadcom Cygnus SoC Signed-off-by: Ray Jui <rjui@broadcom.com> Tested-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-07ARM: dts: rockchip: add input supplies for the act8846 on Radxa RockHeiko Stuebner1-0/+16
On the Radxa Rock board most supplies come from the static 5v vsys supply, but the inl1-supply comes from the REG4 of the act8846 itself. Model this dependency using the added supply-handling to make sure the supplying regulator gets handled correctly and not accidentially turned off. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-03-07ARM: BCM5301X: Fix default state of power LEDs on Netgear R6250Rafał Miłecki1-2/+2
We want green LED to be enabled by default. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-07ARM: BCM5301X: Add DT for Netgear R8000Rafał Miłecki2-1/+79
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Ian Kent <raven@themaw.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-07ARM: shmobile: ape6evm dts: Configure the custom switch as wake-up sourceGeert Uytterhoeven1-0/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-07ARM: shmobile: ape6evm dts: Enable pull-up for GPIO switchesGeert Uytterhoeven1-0/+9
The switches on r8a73a4/ape6evm do not have pull-up registers. The schematics say: "Need to use APE6 internal PullUp", hence enable pull-up using pinctrl. Without this, the switches don't really work, as the GPIO inputs are more likely to pick up ghost signals through capacitive coupling than actual keypresses. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-05devicetree: Add TI-NSPIRE USB OTG support to device treeDaniel Tang3-0/+30
Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-05Merge tag 'for-v4.0-rc/meson-dts' of ↵Arnd Bergmann5-0/+222
https://github.com/carlocaione/linux-meson into next/dt Pull "meson DTS changes" from Carlo Caione: - New DTS for MINIX NEO-X8 - Add DTS support for SPIFC, Ethernet controller and pinctrl * tag 'for-v4.0-rc/meson-dts' of https://github.com/carlocaione/linux-meson: ARM: dts: meson: add DTS file for MINIX NEO-X8 ARM: dts: meson8: add pinctrl node ARM: dts: meson: enable Ethernet controller ARM: dts: meson: add node for SPIFC
2015-03-05Merge tag 'renesas-dt-for-v4.1' of ↵Arnd Bergmann17-51/+647
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman: * Increase hardware coverage of DT for various SoCs * Add PFC information for emev2 SoC * Remap entire APMU region for r8a7791 and r8a7790 SoCs * Declare the full 512 MiB of RAM for kzm9g board * Add selectable sources to DIV6 clocks to sh73a0 SoC * Add missing INTCA0 clock for irqpin module on sh73a0 SoC * Set control-parent for all irqpin node on sh73a0 SoC * tag 'renesas-dt-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (32 commits) ARM: shmobile: r8a7794: add SDHI DT support ARM: shmobile: r8a7790: add ADSP clocks ARM: shmobile: r8a7791: add ADSP clocks ARM: shmobile: henninger: add CAN0 DT support ARM: shmobile: r8a7791: add CAN DT support ARM: shmobile: r8a7791: add CAN clocks ARM: shmobile: r8a7790: add CAN DT support ARM: shmobile: r8a7790: add CAN clocks ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1 ARM: shmobile: emev2 dtsi: Add PFC information ARM: shmobile: r8a7791: smp: remap whole apmu region ARM: shmobile: r8a7790: smp: remap whole apmu region ARM: shmobile: koelsch: Add DU HDMI output support ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names ARM: shmobile: r8a7794: Correct SDHI clock base address, labels and output-names ARM: shmobile: r8a7794: alt: Enable ethernet controller ARM: shmobile: r8a7794: Add ethernet controller to device tree ARM: shmobile: r8a7794: Add IPMMU DT nodes ARM: shmobile: r8a7791: Add IPMMU DT nodes ARM: shmobile: r8a7790: Add IPMMU DT nodes ...
2015-03-04ARM: dts: add rk3288 PopMetal boardAndy Yan1-0/+447
PopMetal is a rockchip rk3288 based board made by ChipSpark, which has many interface such as VGA,HDMI,usb,ir,sdcad and lots of sensors such as gyroscope(L3G4200D),accelerometer(mma8452), compass(AK8963C). This patch add a basic support for this board, which make the board boot into a initramfs shell with sdcard,hdmi and all sensors enabled Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-03-04dt-bindings: add root compatible property for PopMetal boardAndy Yan1-0/+4
PopMetal board is a rk3288 based board made by ChipSpark, this add root compatible property for it Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-03-04ARM: at91/dt: sama5d4: add ISI dt supportJosh Wu1-0/+42
Add ISI dt node and pinctrl settings in sama5d4.dtsi. Signed-off-by: Josh Wu <josh.wu@atmel.com> [nicolas.ferre@atmel.com: sort nodes in order. remove useless comments] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: sama5d4: add pwm0 device nodeBo Shen1-0/+10
Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: sama5d4: add aes, sha and tdes nodesLeilei Zhao1-0/+40
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91: dt: sama5d4ek: enable audioBo Shen1-0/+20
Enable audio support for sama5d4ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91: dt: sama5d4ek: add and enable wm8904Bo Shen1-0/+7
Add wm8904 codec node and enable it. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91: dt: sama5d4ek: enable ssc0Bo Shen1-0/+4
Enable SSC0 node, which will be used for audio. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91: dt: sama5d4: add ssc nodesBo Shen1-0/+70
Add SSC 0 and 1 nodes. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: sama5d4 xplained: add i2c0Nicolas Ferre1-0/+4
Add i2c0 aka twi0 on sama5d4 xplained board. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: sama5d4: add dts for sama5d4 xplained boardJosh Wu2-0/+238
Add at91 sama5d4 xplained board support. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: sama5d4: add #{address, size}_cells properties for macb0Josh Wu1-0/+2
macb0 DT node can have phy child nodes, so add the #{address, size}_cells for macb0 node. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: sama5d4ek: add leds in DT nodeJosh Wu1-0/+22
Add the leds DT node in the dts file. In the leds, d10 is set as heartbeat led. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: add i2c1 declaration to sama5d4Philip Attfield1-0/+28
Add alias, node declaration and pinctrl for i2c1 (aka: twi1). Signed-off-by: Philip Attfield <phil.attfield@seqlabs.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not neededNicolas Ferre2-4/+0
Gpio-keys nodes are not using the "reg" property in their sub nodes. So, there is no need to define #address-cells and #size-cells properties in gpio-keys nodes: we remove them in these new boards. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: at91-sama5d3_xplained: add gpio-key pinctrl propertyWenyou Yang1-0/+8
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripheralsNicolas Ferre7-7/+7
File name had at91 prefix, which is not the case anymore for SAMA5D3. AT91SAM9x5 was mentioned instead of SAMA5D3 SoC. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: at91sam9n12ek: enable udpBo Shen1-0/+14
Enable usb device port on at91sam9n12ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: at91sam9n12: add udp device nodeBo Shen1-0/+9
Add usb device node for at91sam9n12. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640Josh Wu1-0/+18
Enable ISI and ov2640 for at91sam9g25ek board. Meantime, we need to disable the mmc1 and spi0 as they have pin conflict with ISI. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91: at91sam9x5ek/dts: add ov2640 supportJosh Wu1-0/+48
Add the camera sensor ov2640 dt support. And connect sensor to isi node as well. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrlsJosh Wu2-0/+47
Add a new file: at91sam9x5_isi.dtsi, which includes ISI node and pinctrls. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: mvebu: add Device Tree files for Armada 39x SoC and boardThomas Petazzoni5-0/+780
This commit adds the Device Tree files for the Armada 39x family of processors, as well as one Armada 398 Development Board. Like for other Marvell EBU families, a common armada-39x.dtsi contains the description of the common features of all Armada 39x SoCs, while armada-390.dtsi and armada-398.dtsi respectively describe the specificities of those SoCs. Finally, an armada-398-db.dts file is added to describe the Armada 398 Development Board itself. So far, the following features are supported: * SMP: dual Cortex-A9 * Basic ARM IPs: SCU, timer, GIC, L2 cache * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus controller, MPIC interrupt controller, timer, CPU reset for SMP, PMSU. * I2C * SPI * SDHCI * XOR * NAND * UART * PCIe Additional features will be supported in the future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04Merge tag 'at91-fixes' into at91-4.1-dtNicolas Ferre14-59/+64
First fixes batch for AT91 on 4.0: - PM slowclock fixes for DDR and timeouts - fix some DT entries - little defconfig updates - the removal of a harmful watchdog option + its detailed documentation
2015-03-04ARM: mvebu: fix unit address of MPIC nodesThomas Petazzoni4-4/+4
The Device Tree nodes describing the MPIC nodes on Armada 370, 375, 38x and XP had a unit address that did not match the first reg property, as suggested by the ePAPR. This commit fixes that. [gregory.clement@free-electrons.com: removed the armada-38x part, as it was already applied by a previous patch] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: use stdout-path in all armada-*.dtsThomas Petazzoni19-24/+19
This commit adds the stdout-path property in /chosen for all Armada boards that were not yet carrying this property, and gets rid of /chosen/bootargs which becomes unneeded: earlyprintk should not be used by default, and the console= parameter is replaced by the /chosen/stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: add serial port aliases on Armada 370/375/38x/XPThomas Petazzoni4-0/+8
This commit adds 'serialX' aliases for the various serial ports on Armada 370, 375, 38x and XP platforms. It will allow the usage of the stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XPThomas Petazzoni6-10/+0
Having aliases for Ethernet devices is useless, since the networking subsystem unfortunately doesn't care about aliases to name network interfaces. Note that the 'aliases' nodes in armada-370-xp.dtsi and armada-xp.dtsi become empty, but that we keep it as is since a followup patch will re-add some aliases to it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04ARM: mvebu: add UART labels to Armada 375Thomas Petazzoni1-2/+2
This commit adds the standard uart0 and uart1 DT labels to the Device Tree description of the Marvell Armada 375 SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 11:17:11 +0300