summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-01-17Merge tag 'davinci-for-v3.14/watchdog' of ↵Kevin Hilman10-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers From Sekhar Nori: This patch updates the davinci watchdog platform device name from generic "watchdog" to something more specific. * tag 'davinci-for-v3.14/watchdog' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: watchdog: davinci: rename platform driver to davinci-wdt Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-09watchdog: davinci: rename platform driver to davinci-wdtIvan Khoronzhuk10-12/+12
As we switch to use the watchdog core which permits more than one active watchdog in the system, rename platform driver to "davinci-wdt" to be identifiable. Acked-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-01-09Merge branch 'qcom/drivers' into next/driversOlof Johansson13-31/+226
* qcom/drivers: tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-09tty: serial: Limit msm_serial_hs driver to platforms that use itStephen Boyd1-1/+1
The msm_serial_hs driver uses mach specific dma APIs. This is not compatible with the multi-platform ARM effort. Let's only compile this driver on MSM devices that are prepared to support it; allowing the DT based MSM devices to enter the multi-platform ARM build. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-09mmc: msm_sdcc: Limit driver to platforms that use itStephen Boyd1-1/+1
The msm_sdcc driver uses mach specific dma APIs. This is not compatible with the multi-platform ARM effort. Let's only compile this driver on MSM devices that are prepared to support it, allowing the DT based MSM devices to enter the multi-platform ARM build. Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-09usb: phy: msm: Move mach dependent code to platform dataIvan T. Ivanov4-20/+88
This patch fix compilation error when driver is compiled in multi-platform builds. drivers/built-in.o: In function `msm_otg_link_clk_reset': ./drivers/usb/phy/phy-msm-usb.c:314: undefined reference to `clk_reset' ./drivers/usb/phy/phy-msm-usb.c:318: undefined reference to `clk_reset' Use platform data supplied reset handlers and adjust error messages reported when reset sequence fail. This is an intermediate step before adding support for reset framework and newer targets. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-04Merge tag 'integrator-for-v3.14' of ↵Olof Johansson9-22/+103
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/drivers From Linus Walleij: Some Integrator patches that matured for v3.14: - Use PATCH_PHYS_TO_VIRT and AUTO_ZRELADDR. - Support cascaded interrupts on the SIC. - Complete clock implementation for the IM-PD1. * tag 'integrator-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT ARM: integrator: Default enable ARM_PATCH_PHYS_VIRT, AUTO_ZRELADDR Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-04Merge tag 'sunxi-core-for-3.14' of https://github.com/mripard/linux into ↵Olof Johansson7-1/+169
next/drivers From Maxime Ripard: Allwinner core changes for 3.14 This mostly adds the reset controller initialisation for the A31 and the SMP operations for this SoC. * tag 'sunxi-core-for-3.14' of https://github.com/mripard/linux: ARM: sun6i: Add SMP support for the Allwinner A31 dt-bindings: fix example of allwinner interrupt controller ARM: sunxi: Register the A31 reset IP in init_time ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-04clk: versatile: fixup IM-PD1 clock implementationLinus Walleij1-15/+71
Register both VCO clocks, give per-logical module unique names to the clocks so we can have several IM-PD1's connected (in theory). Implement all the fixed-factor clocks as children of VCO2. Tested by using the UARTs and the PL181 MMC block on the IM-PD1, works flawlessly. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-04clk: versatile: pass a name to ICST clock providerLinus Walleij5-6/+10
When we have more than one of these clocks in a system (such as on the IM-PD1) we need a mechanism to pass a name for the clock. Refactor to add this as an argument. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-04ARM: integrator: pass parent IRQ to the SICLinus Walleij1-0/+3
The SIC is cascaded off the PIC, so specify this in the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-04irqchip: versatile FPGA: support cascaded interrupts from DTLinus Walleij2-2/+18
The Versatile FPGA interrupt controller supports cascading interrupts, i.e. that its output is connected to the input of another interrupt controller. This makes it possible to pass a parent interrupt from the device tree and print it in the boot log if applicable. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02Merge tag 'davinci-for-v3.14/gpio' of ↵Olof Johansson816-4046/+7769
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers From Sekhar Nori: DaVinci GPIO driver updates --------------------------- This pull request contains updates to DaVinci GPIO driver and the resultant platform code changes. The updates include DT-conversion and changes to make the driver cross-platform ready. * tag 'davinci-for-v3.14/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge tag 'mvebu-drivers-3.14-2' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson5-0/+324
next/drivers From Jason Cooper: mvebu driver changes for v3.14 (incremental #2) - rtc - add driver for Intersil ISL12057 chip * tag 'mvebu-drivers-3.14-2' of git://git.infradead.org/linux-mvebu: rtc: Add support for Intersil ISL12057 I2C RTC chip b the commit. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: msm_defconfig: Enable restart driverStephen Boyd1-0/+2
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974Rohit Vaswani1-0/+1
This patch enables MSM8974 build support. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: msm: Add support for APQ8074 DragonboardRohit Vaswani3-1/+17
This patch adds basic board support for APQ8074 Dragonboard which belongs to the Snapdragon 800 family. For now, just support a basic machine with device tree. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> [olof: Split off SoC and board support in separate patches] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge tag 'renesas-sh-sci3-for-v3.14' of ↵Olof Johansson45-1153/+1166
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers From Simon Horman: Third Round of Renesas SH SCI Updates for v3.14 * Add Device Tree Support * Remove platform data mapbase and irqs fields * Remove platform data scbrr_algo_id field * tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge tag 'renesas-sh-soc-for-v3.14' of ↵Olof Johansson28-375/+889
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Renesas SH based SoC Updates for v3.14 * Global - Don't set plat_sci_port scbrr_algo_id field - Declare SCIF register base and IRQ as resources * sh772[34] SoCs - Set serial port sampling rate to 8 for SCIFA ports (These are merged through arm-soc due to dependencies with the SCI platform data rework done for shmobile) * tag 'renesas-sh-soc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: sh: Don't set plat_sci_port scbrr_algo_id field sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA ports sh: Declare SCIF register base and IRQ as resources Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge branch 'renesas/drivers-sci2' into next/driversOlof Johansson3-192/+164
* renesas/drivers-sci2: serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically serial: sh-sci: Convert to clk_prepare/unprepare serial: sh-sci: Don't enable/disable port from within break timer serial: sh-sci: Fix warnings due to improper casts and printk formats
2014-01-02ARM: dts: MSM8974: Add MMIO architected timer nodeStephen Boyd1-0/+59
Add the mmio architected timer node. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: dts: MSM8974: Add restart nodeStephen Boyd1-0/+5
Add the restart node so we can reboot the device. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: msm: Simplify ARCH_MSM_DT configStephen Boyd1-2/+4
This doesn't need to be a def_bool y. Instead we can have every DT supported platform select ARCH_MSM_DT and we achieve the same thing with less chance of conflicts. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: msm: Add support for MSM8974 SoCRohit Vaswani2-1/+43
Add support for the Snapdragon 800 MSM8974 SoC, used on the Dragonboard and others. Board support added in separate patch. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> [olof: split off SoC support in separate patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02ARM: msm: trout: fix uninit var warningJosh Cartwright1-6/+6
Fix the following warning when !CONFIG_MMC: arch/arm/mach-msm/board-trout.c: In function 'trout_init': arch/arm/mach-msm/board-trout.c:67:6: warning: unused variable 'rc' [-Wunused-variable] int rc; ^ Also, while we're here, rework explicit printk(KERN_CRIT..) to use pr_crit. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-30Merge tag 'renesas-irqc-for-v3.14' of ↵Olof Johansson1-13/+8
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers From Simon Horman: Renesas ARM based SoC IRQC Driver Updates for v3.14 * Simplify irq_set_type() method * Enable mask on suspend * Use lazy disable * tag 'renesas-irqc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: irq-renesas-irqc: simplify irq_set_type() method irqchip: renesas-irqc: Enable mask on suspend irqchip: renesas-irqc: Use lazy disable Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-28Merge tag 'sunxi-drivers-for-3.14' of https://github.com/mripard/linux into ↵Olof Johansson6-0/+724
next/drivers From Maxime Ripard: Allwinner SoC additions for 3.14 Two drivers are merged through for 3.14: - The A10/A20 RTC driver - The A31 reset controller IP * tag 'sunxi-drivers-for-3.14' of https://github.com/mripard/linux: ARM: sun4i/sun7i: RTC driver ARM: sun4i/sun7i: DT documentation for RTC driver reset: Add Allwinner SoCs Reset Controller Driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26Merge tag 'tegra-for-3.14-trusted-foundations' of ↵Olof Johansson13-11/+239
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers From Stephen Warren: ARM: tegra: Trusted Foundations firmware support Add support for the Trusted Foundations secure-mode firmware, as found on NVIDIA SHIELD. This allows Linux to run in non-secure mode on this board; all previous Tegra support has assumed the kernel is running in secure mode. (The base TF support has been discussed back and forth a lot; for now the most logical place for it seems to be under arch/arm, so we're adding it here. We can move it out to a common location in the future if needed). * tag 'tegra-for-3.14-trusted-foundations' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: support Trusted Foundations by default ARM: tegra: set CPU reset handler using firmware ARM: tegra: split setting of CPU reset handler ARM: tegra: add support for Trusted Foundations of: add Trusted Foundations bindings documentation of: add vendor prefix for Trusted Logic Mobility ARM: add basic support for Trusted Foundations Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-25gpio: davinci: don't create irq_domain in case of unbanked irqsGrygorii Strashko1-15/+19
The system may crash if: - there are more than 1 banks - unbanked irqs are enabled - someone will call gpio_to_irq() for GPIO from bank2 or above Hence, fix it by not creating irq_domain if unbanked irqs are enabled and correct gpio_to_irq_banked() to handle this properly. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-25gpio: davinci: use chained_irq_enter/chained_irq_exit APIGrygorii Strashko1-3/+3
It's unsafe to call IRQ chip callbacks (.irq_mask/irq_unmask/irq_ack) from chained IRQ handler directly. Because, Davinci GPIO block is used by different SoCs, which, in turn, have different Main IRQ controllers (Davinci - aintc, cp-intc; Keystone - arm-gic) which may introduce diffrent set of IRQ chip callbacks. As result, call of gpio_irq_handler() on Keysone will simply cause crash the system, because ARM-GIC implements .irq_eoi() instead of .irq_ack(). Hence, fix it by using Kernel chained_irq_enter/chained_irq_exit APIs as they are intended to handle exact such cases. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-25gpio: davinci: add OF supportKV Sujith2-3/+95
This patch adds OF parser support for davinci gpio driver and also appropriate documentation in gpio-davinci.txt located at Documentation/devicetree/bindings/gpio/. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> [prabhakar.csengg@gmail.com: simplified the OF code, removed unnecessary DT property and also simplified the commit message] Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-25gpio: davinci: remove unused variable intc_irq_numLad, Prabhakar7-7/+0
As the davinci-gpio driver is migrated to use irqdomain there is no need to pass the irq base for the gpio driver. This patch removes this variable from davinci_gpio_platform_data and also the refrences from the machine file. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-25gpio: davinci: convert to use irqdomain support.Lad, Prabhakar2-34/+48
Convert the davinci gpio driver to use irqdomain support. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> [grygorii.strashko@ti.com: - switch to use one irq-domain per all GPIO banks - keep irq_create_mapping() call in gpio_to_irq_banked() as it simply transformed to irq_find_mapping() if IRQ mapping exist already] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-25gpio: introduce GPIO_DAVINCI kconfig optionGrygorii Strashko2-1/+8
The compatible to Davinci GPIO HW block is used by other TI SoCs, like Keystone, where GPIO support is declared as optional. Hence, introduce GPIO_DAVINCI Kconfig option which will allow to enable Davinci GPIO driver for Keystone SoCs when needed. At same time, kept Davinci GPIO driver enabled for Davinci SoCs by default. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-25gpio: davinci: get rid of DAVINCI_N_GPIOGrygorii Strashko1-2/+2
Since Davinci GPIO driver is moved to support gpiolib it has to use ARCH_NR_GPIOS (can be configured using CONFIG_ARCH_NR_GPIO Kconfig option) configuration instead of any mach/platform specific options. Hence, replace private DAVINCI_N_GPIO with common ARCH_NR_GPIOS. This is safe because default value for ARCH_NR_GPIOS=256 and maximum number of supported GPIOs for Davinci is DAVINCI_N_GPIO=144. More over, this is one of steps to re-use Davinci GPIO driver by other mach/platform. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-25gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*Lad, Prabhakar1-18/+18
This patch replaces the __raw_readl/writel with {readl|writel}_relaxed(), Altough the code runs on ARMv5 based SOCs, changing this will help using code for other use cases (like with big-endian machines). Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-12-24serial: sh-sci: Add OF supportBastian Hecht1-3/+98
Extend the driver to with support for SCIx device tree bindings. A minimal set of features is supported, additional properties can be added later should the need to describe more device features arise. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Add device tree bindings documentationLaurent Pinchart1-0/+46
Document the device tree bindings for the sci serial port devices. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove platform data mapbase and irqs fieldsLaurent Pinchart2-52/+34
The fields are not used anymore by board files, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove platform data scbrr_algo_id fieldLaurent Pinchart2-31/+5
The field isn't set by any board, remote it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24Merge branch 'sh-soc' into sh-sci2-baseSimon Horman28-375/+889
2013-12-24sh: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart28-108/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA portsLaurent Pinchart2-6/+6
SCIFA ports on sh7723 and sh7724 seem to use a sampling rate of half the value specified in the datasheet. This is currently handled by a custom baud rate calculation algorithm. The algorithm ID will be removed from platform data, set the sampling rate directly instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24sh: Declare SCIF register base and IRQ as resourcesLaurent Pinchart28-261/+883
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24arm: shmobile: r7s72100: add i2c clocksWolfram Sang1-1/+7
Tested with RIIC2 on a genmai board. Others untested but hopefully trivial enough to be added. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-5/+4
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-6/+5
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 12:23:14 +0300