summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-02net: phy: bcm87xx: Use mmd helpersAndrew Lunn1-16/+20
Rather than construct special phy device addresses to access C45 registers, use the mmd helpers. These will directly call the C45 API of the MDIO bus driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02net: phy: Convert to mdiobus_c45_{read|write}Andrew Lunn1-7/+11
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02net: phylink: Convert to mdiobus_c45_{read|write}Andrew Lunn1-15/+17
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02Merge tag 'linux-can-next-for-5.19-20220502' of ↵Paolo Abeni7-55/+15
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-05-02 this is a pull request of 9 patches for net-next/master. The first patch is by Biju Das and documents renesas,r9a07g043-canfd support in the renesas,rcar-canfd bindings document. Jakub Kicinski's patch removes a copy of the NAPI_POLL_WEIGHT define from the m_can driver. The last 7 patches all target the ctucanfd driver. Pavel Pisa provides 2 patch which update the documentation. 2 patches by Jiapeng Chong remove unneeded includes and error messages. And another 3 patches by Pavel Pisa to further clean up the driver (remove inline keyword, remove unneeded debug statements, and remove unneeded module parameters). linux-can-next-for-5.19-20220502 * tag 'linux-can-next-for-5.19-20220502' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: ctucanfd: remove PCI module debug parameters can: ctucanfd: remove debug statements can: ctucanfd: remove inline keyword from local static functions can: ctucanfd: ctucan_platform_probe(): remove unnecessary print function dev_err() can: ctucanfd: remove unused including <linux/version.h> docs: networking: device drivers: can: ctucanfd: update author e-mail docs: networking: device drivers: can: add ctucanfd to index can: m_can: remove a copy of the NAPI_POLL_WEIGHT define dt-bindings: can: renesas,rcar-canfd: Document RZ/G2UL support ==================== Link: https://lore.kernel.org/r/20220502075914.1905039-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02nfp: support VxLAN inner TSO with GSO_PARTIAL offloadFei Qin1-2/+6
VxLAN belongs to UDP-based encapsulation protocol. Inner TSO for VxLAN packet with udpcsum requires offloading of outer header csum. The device doesn't support outer header csum offload. However, inner TSO for VxLAN with udpcsum can still work with GSO_PARTIAL offload, which means outer udp csum computed by stack and inner tcp segmentation finished by hardware. Thus, the patch enable features "NETIF_F_GSO_UDP_TUNNEL_CSUM" and "NETIF_F_GSO_PARTIAL" and set gso_partial_features. Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220430231150.175270-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02selftests: net: vrf_strict_mode_test: add support to select a test to runJaehee Park1-9/+39
Add a boilerplate test loop to run all tests in vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to run. Remove the vrf_strict_mode_tests function which is now unused. Signed-off-by: Jaehee Park <jhpark1013@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-Extreme Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02Merge branch 'devices-always-netif_f_lltx'Paolo Abeni2-49/+35
Peilin Ye says: ==================== devices always NETIF_F_LLTX v1: https://lore.kernel.org/netdev/cover.1650580763.git.peilin.ye@bytedance.com/ change since v1: - deleted "depends on patch..." in [1/2]'s commit message This patchset depends on these fixes [1], which has been merged into net-next. Since o_seqno is now atomic_t, we can always turn on NETIF_F_LLTX for [IP6]GRE[TAP] devices, since we no longer need the TX lock (&txq->_xmit_lock). We could probably do the same thing to [IP6]ERSPAN devices as well, but I'm not familiar with them yet. For example, ERSPAN devices are initialized as |= GRE_FEATURES in erspan_tunnel_init(), but I don't see IP6ERSPAN devices being initialized as |= GRE6_FEATURES. Where should we initialize IP6ERSPAN devices' ->features? Please suggest if I'm missing something, thanks! [1] https://lore.kernel.org/netdev/cover.1650575919.git.peilin.ye@bytedance.com/ ==================== Link: https://lore.kernel.org/r/cover.1651207788.git.peilin.ye@bytedance.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02ip6_gre: Make IP6GRE and IP6GRETAP devices always NETIF_F_LLTXPeilin Ye1-21/+13
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and always mark IP6GRE[TAP] devices as NETIF_F_LLTX, since we no longer need the TX lock (&txq->_xmit_lock). Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02ip_gre: Make GRE and GRETAP devices always NETIF_F_LLTXPeilin Ye1-28/+22
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and always mark GRE[TAP] devices as NETIF_F_LLTX, since we no longer need the TX lock (&txq->_xmit_lock). Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02can: ctucanfd: remove PCI module debug parametersPavel Pisa1-16/+6
This patch removes the PCI module debug parameters, which are not needed anymore, to make both checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.cz Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> [mkl: split into separate patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02can: ctucanfd: remove debug statementsPavel Pisa1-26/+0
This patch removes the debug statements from the driver to make checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.cz Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> [mkl: split into separate patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02can: ctucanfd: remove inline keyword from local static functionsPavel Pisa1-4/+3
This patch removes the inline keywords from the local static functions to make both checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.cz Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> [mkl: split into separate patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02can: ctucanfd: ctucan_platform_probe(): remove unnecessary print function ↵Jiapeng Chong1-1/+0
dev_err() The print function dev_err() is redundant because platform_get_irq() already prints an error. Eliminate the follow coccicheck warnings: | drivers/net/can/ctucanfd/ctucanfd_platform.c:67:2-9: | line 67 is redundant because platform_get_irq() already prints an error. Link: https://lore.kernel.org/all/20220421203242.7335-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Pave Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02can: ctucanfd: remove unused including <linux/version.h>Jiapeng Chong1-1/+0
Eliminate the follow versioncheck warning: | drivers/net/can/ctucanfd/ctucanfd_base.c: 34 linux/version.h not needed. Link: https://lore.kernel.org/all/20220421202852.2693-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Pave Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02docs: networking: device drivers: can: ctucanfd: update author e-mailPavel Pisa1-1/+1
This patch updates the author's email address. Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.cz Cc: Odrej Ille <ondrej.ille@gmail.com> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> [mkl: split into separate patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02docs: networking: device drivers: can: add ctucanfd to indexPavel Pisa1-0/+1
This patch adds the ctucanfd-driver document to the index. Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.cz Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> [mkl: split into separate patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02can: m_can: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski1-6/+3
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Link: https://lore.kernel.org/all/20220429174446.196655-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-02dt-bindings: can: renesas,rcar-canfd: Document RZ/G2UL supportBiju Das1-0/+1
Add CANFD binding documentation for Renesas R9A07G043 (RZ/G2UL) SoC. Link: https://lore.kernel.org/all/20220423130743.123198-1-biju.das.jz@bp.renesas.com Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-05-01Merge branch 'adin1100-industrial-PHY-support'David S. Miller13-9/+722
Alexandru Tachici says: ==================== net: phy: adin1100: Add initial support for ADIN1100 industrial PHY The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. The ADIN1100 uses Auto-Negotiation capability in accordance with IEEE 802.3 Clause 98, providing a mechanism for exchanging information between PHYs to allow link partners to agree to a common mode of operation. The concluded operating mode is the transmit amplitude mode and master/slave preference common across the two devices. Both device and LP advertise their ability and request for increased transmit at: - BASE-T1 autonegotiation advertisement register [47:32]\ Clause 45.2.7.21 of Standard 802.3 - BIT(13) - 10BASE-T1L High Level Transmit Operating Mode Ability - BIT(12) - 10BASE-T1L High Level Transmit Operating Mode Request For 2.4 Vpp (high level transmit) operation, both devices need to have the High Level Transmit Operating Mode Ability bit set, and only one of them needs to have the High Level Transmit Operating Mode Request bit set. Otherwise 1.0 Vpp transmit level will be used. Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT1L/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT1L/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT1L/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 10Mb/s Duplex: Full Auto-negotiation: on master-slave cfg: preferred slave master-slave status: slave Port: Twisted Pair PHYAD: 0 Transceiver: external MDI-X: Unknown Link detected: yes SQI: 7/7 1. Add basic support for ADIN1100. Alexandru Ardelean (1): net: phy: adin1100: Add initial support for ADIN1100 industrial PHY 1. Added 10baset-T1L link modes. 2. Added 10-BasetT1L registers. 3. Added Base-T1 auto-negotiation registers. For Base-T1 these registers decide master/slave status and TX voltage of the device and link partner. 4. Added 10BASE-T1L support in phy-c45.c. Now genphy functions will call Base-T1 functions where registers don't match, like the auto-negotiation ones. 5. Convert MSE to SQI using a predefined table and allow user access through ethtool. 6. DT bindings for the 2.4 Vpp transmit mode. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01dt-bindings: net: phy: Add 10-baseT1L 2.4 VppAlexandru Tachici1-0/+9
Add a tristate property to advertise desired transmit level. If the device supports the 2.4 Vpp operating mode for 10BASE-T1L, as defined in 802.3gc, and the 2.4 Vpp transmit voltage operation is desired, property should be set to 1. This property is used to select whether Auto-Negotiation advertises a request to operate the 10BASE-T1L PHY in increased transmit level mode. If property is set to 1, the PHY shall advertise a request to operate the 10BASE-T1L PHY in increased transmit level mode. If property is set to zero, the PHY shall not advertise a request to operate the 10BASE-T1L PHY in increased transmit level mode. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: adin1100: Add SQI supportAlexandru Tachici1-0/+52
Determine the SQI from MSE using a predefined table for the 10BASE-T1L. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: adin1100: Add initial support for ADIN1100 industrial PHYAlexandru Ardelean3-0/+248
The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: Add 10BASE-T1L support in phy-c45Alexandru Tachici5-5/+336
This patch is needed because the BASE-T1 uses different registers for status, control and advertisement to those already employed in the existing phy-c45 functions. Where required, genphy_c45 functions will now check whether the device supports BASE-T1 and use the specific registers instead: 45.2.7.19 BASE-T1 AN control register, 45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN advertisement register, 45.2.7.22 BASE-T1 AN LP Base Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control register. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: Add BaseT1 auto-negotiation registersAlexandru Tachici1-0/+40
Added BASE-T1 AN advertisement register (Registers 7.514, 7.515, and 7.516) and BASE-T1 AN LP Base Page ability register (Registers 7.517, 7.518, and 7.519). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: Add 10-BaseT1L registersAlexandru Tachici1-0/+25
The 802.3gc specification defines the 10-BaseT1L link mode for ethernet trafic on twisted wire pair. PMA status register can be used to detect if the phy supports 2.4 V TX level and PCS control register can be used to enable/disable PCS level loopback. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01ethtool: Add 10base-T1L link mode entryAlexandru Tachici6-4/+12
Add entry for the 10base-T1L full duplex mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: dsa: mv88e6xxx: Cosmetic change spaces to tabs in dsa_switch_opsMarek Behún1-5/+5
All but 5 methods in dsa_swith_ops use tabs for indentation. Change the 5 methods that break this rule. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: enable memcg accounting for veth queuesVasily Averin1-1/+1
veth netdevice defines own rx queues and allocates array containing up to 4095 ~750-bytes-long 'struct veth_rq' elements. Such allocation is quite huge and should be accounted to memcg. Signed-off-by: Vasily Averin <vvs@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01Merge branch 'UDP-sock_wfree-opts'David S. Miller1-3/+40
Pavel Begunkov says: ==================== UDP sock_wfree optimisations The series is not UDP specific but that the main beneficiary. 2/3 saves one atomic in sock_wfree() and on top 3/3 removes an extra barrier. Tested with UDP over dummy netdev, 2038491 -> 2099071 req/s (or around +3%). note: in regards to 1/3, there is a "Should agree with poll..." comment that I don't completely get, and there is no git history to explain it. Though I can't see how it could rely on having the second check without racing with tasks woken by wake_up*(). The series was split from a larger patchset, see https://lore.kernel.org/netdev/cover.1648981570.git.asml.silence@gmail.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01sock: optimise sock_def_write_space barriersPavel Begunkov1-1/+25
Now we have a separate path for sock_def_write_space() and can go one step further. When it's called from sock_wfree() we know that there is a preceding atomic for putting down ->sk_wmem_alloc. We can use it to replace to replace smb_mb() with a less expensive smp_mb__after_atomic(). It also removes an extra RCU read lock/unlock as a small bonus. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01sock: optimise UDP sock_wfree() refcountingPavel Begunkov1-0/+14
For non SOCK_USE_WRITE_QUEUE sockets, sock_wfree() (atomically) puts ->sk_wmem_alloc twice. It's needed to keep the socket alive while calling ->sk_write_space() after the first put. However, some sockets, such as UDP, are freed by RCU (i.e. SOCK_RCU_FREE) and use already RCU-safe sock_def_write_space(). Carve a fast path for such sockets, put down all refs in one go before calling sock_def_write_space() but guard the socket from being freed by an RCU read section. note: because TCP sockets are marked with SOCK_USE_WRITE_QUEUE it doesn't add extra checks in its path. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01sock: dedup sock_def_write_space wmem_alloc checksPavel Begunkov1-3/+2
Except for minor rounding differences the first ->sk_wmem_alloc test in sock_def_write_space() is a hand coded version of sock_writeable(). Replace it with the helper, and also kill the following if duplicating the check. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: marvell: update abilities and advertising when switching to SGMIIRobert Hancock1-1/+15
With some SFP modules, such as Finisar FCLF8522P2BTL, the PHY hardware strapping defaults to 1000BaseX mode, but the kernel prefers to set them for SGMII mode. When this happens and the PHY is soft reset, the BMSR status register is updated, but this happens after the kernel has already read the PHY abilities during probing. This results in support not being detected for, and the PHY not advertising support for, 10 and 100 Mbps modes, preventing the link from working with a non-gigabit link partner. When the PHY is being configured for SGMII mode, call genphy_read_abilities again in order to re-read the capabilities, and update the advertising field accordingly. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: lan966x: Fix compilation errorHoratiu Vultur1-0/+4
Starting from the blamed commit, the lan966x build fails with the following compilation error: drivers/net/ethernet/microchip/lan966x/lan966x_ptp.c:342:9: error: implicit declaration of function ‘ptp_find_pin_unlocked’ [-Werror=implicit-function-declaration] 342 | pin = ptp_find_pin_unlocked(phc->clock, PTP_PF_EXTTS, 0); The issue is that there is no stub function for ptp_find_pin_unlocked in case CONFIG_PTP_1588_CLOCK is not selected. Therefore add one. Reported-by: kernel test robot <lkp@intel.com> Fixes: f3d8e0a9c28ba0 ("net: lan966x: Add support for PTP_PF_EXTTS") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30ipv4: remove unnecessary type castingsYu Zhe8-10/+10
remove unnecessary void* type castings. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30eth: remove remaining copies of the NAPI_POLL_WEIGHT defineJakub Kicinski3-8/+5
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. This patch covers three more drivers which I missed in commit 5f012b40ef63 ("eth: remove copies of the NAPI_POLL_WEIGHT define"). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30tcp: use tcp_skb_sent_after() instead in RACKPengcheng Yang1-10/+5
This patch doesn't change any functionality. Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net/funeth: simplify the return expression of fun_dl_info_get()Minghao Chi1-7/+1
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30qede: Reduce verbosity of ptp tx timestampPrabhakar Kushwaha1-5/+5
Reduce verbosity of ptp tx timestamp error to reduce excessive log messages. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: ethernet: ocelot: remove the need for num_stats initializerColin Foster7-5/+18
There is a desire to share the oclot_stats_layout struct outside of the current vsc7514 driver. In order to do so, the length of the array needs to be known at compile time, and defined in the struct ocelot and struct felix_info. Since the array is defined in a .c file and would be declared in the header file via: extern struct ocelot_stat_layout[]; the size of the array will not be known at compile time to outside modules. To fix this, remove the need for defining the number of stats at compile time and allow this number to be determined at initialization. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30tcp: drop skb dst in tcp_rcv_established()Eric Dumazet1-0/+1
In commit f84af32cbca7 ("net: ip_queue_rcv_skb() helper") I dropped the skb dst in tcp_data_queue(). This only dealt with so-called TCP input slow path. When fast path is taken, tcp_rcv_established() calls tcp_queue_rcv() while skb still has a dst. This was mostly fine, because most dsts at this point are not refcounted (thanks to early demux) However, TCP packets sent over loopback have refcounted dst. Then commit 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists") came and had the effect of delaying skb freeing for an arbitrary time. If during this time the involved netns is dismantled, cleanup_net() frees the struct net with embedded net->ipv6.ip6_dst_ops. Then when eventually dst_destroy_rcu() is called, if (dst->ops->destroy) ... triggers an use-after-free. It is not clear if ip6_route_net_exit() lacks a rcu_barrier() as syzbot reported similar issues before the blamed commit. ( https://groups.google.com/g/syzkaller-bugs/c/CofzW4eeA9A/m/009WjumTAAAJ ) Fixes: 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30Merge branch 'lan966x-phy-reset-remove'David S. Miller2-9/+1
Michael Walle says: ==================== net: lan966x: remove PHY reset support Remove the unneeded PHY reset node as well as the driver support for it. This was already discussed [1] and I expect Microchip to Ack on this removal. Since there is no user, no breakage is expected. I'm not sure it this should go through net or net-next and if the patches should have a Fixes: tag or not. In upstream linux there was never any user of it, so there is no bug to be fixed. But OTOH if the schema fix isn't backported, then there might be an older schema version still containing the reset node. Thoughts? The patches needed for the GPIO part are just waiting to be picked up by Linus [2,3]. This patch and the GPIO parts are the last pieces of the puzzle to get ethernet working on the LAN9668 on upstream linux. [1] https://lore.kernel.org/netdev/20220330110210.3374165-1-michael@walle.cc/ [2] https://lore.kernel.org/linux-gpio/CACRpkdbxmN+SWt95aGHjA2ZGnN61aWaA7c5S4PaG+WePAj=htg@mail.gmail.com/ [3] https://lore.kernel.org/linux-gpio/20220420191926.3411830-1-michael@walle.cc/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: lan966x: remove PHY reset supportMichael Walle1-7/+1
The PHY subsystem as well as the MIIM mdio driver (in case of the integrated PHYs) will take care of the resets. A separate reset driver isn't needed. There is no in-tree user of this feature. Remove the support. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30dt-bindings: net: lan966x: remove PHY resetMichael Walle1-2/+0
The PHY reset was intended to be a phandle for a special PHY reset driver for the integrated PHYs as well as any external PHYs. It turns out, that the culprit is how the reset of the switch device is done. In particular, the switch reset also affects other subsystems like the GPIO and the SGPIO block and it happens to be the case that the reset lines of the external PHYs are connected to a common GPIO line. Thus as soon as the switch issues a reset during probe time, all the external PHYs will go into reset because all the GPIO lines will switch to input and the pull-down on that signal will take effect. So even if there was a special PHY reset driver, it (1) won't fix the root cause of the problem and (2) it won't fix all the other consumers of GPIO lines which will also be reset. It turns out, the Ocelot SoC has the same weird behavior (or the lack of a dedicated switch reset) and there the problem is already solved and all the bits and pieces are already there and this PHY reset property isn't not needed at all. There are no users of this binding. Just remove it. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30Merge branch 'ipv6-net-opts'David S. Miller9-74/+57
Pavel Begunkov says: ==================== generic net and ipv6 minor optimisations 1-3 inline simple functions that only reshuffle arguments possibly adding extra zero args, and call another function. It was benchmarked before with a bunch of extra patches, see for details https://lore.kernel.org/netdev/cover.1648981570.git.asml.silence@gmail.com/ It may increase the binary size, but it's the right thing to do and at least without modules it actually sheds some bytes for some standard-ish config. text data bss dec hex filename 9627200 0 0 9627200 92e640 ./arch/x86_64/boot/bzImage text data bss dec hex filename 9627104 0 0 9627104 92e5e0 ./arch/x86_64/boot/bzImage ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30ipv6: refactor ip6_finish_output2()Pavel Begunkov1-11/+13
Throw neigh checks in ip6_finish_output2() under a single slow path if, so we don't have the overhead in the hot path. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30ipv6: help __ip6_finish_output() inliningPavel Begunkov1-1/+0
There are two callers of __ip6_finish_output(), both are in ip6_finish_output(). We can combine the call sites into one and handle return code after, that will inline __ip6_finish_output(). Note, error handling under NET_XMIT_CN will only return 0 if __ip6_finish_output() succeded, and in this case it return 0. Considering that NET_XMIT_SUCCESS is 0, it'll be returning exactly the same result for it as before. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: inline dev_queue_xmit()Pavel Begunkov2-15/+14
Inline dev_queue_xmit() and dev_queue_xmit_accel(), they both are small proxy functions doing nothing but redirecting the control flow to __dev_queue_xmit(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: inline skb_zerocopy_iter_dgramPavel Begunkov4-38/+22
skb_zerocopy_iter_dgram() is a small proxy function, inline it. For that, move __zerocopy_sg_from_iter into linux/skbuff.h Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net: inline sock_alloc_send_skbPavel Begunkov2-9/+8
sock_alloc_send_skb() is simple and just proxying to another function, so we can inline it and cut associated overhead. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 04:03:25 +0300