| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The S32 platform has several Watchdog Timer available and tied with a
CPU. The SWT0 is the only one which directly asserts the reset line,
other SWT require an external setup to configure the reset behavior
which is not part of this change.
As a side note, in the NXP documentation, the s32g2 and s32g3
reference manuals refer the watchdog as the 'Software Timer Watchdog'
where the name can be misleading as it is actually a hardware
watchdog.
The maximum watchdog timeout value depends on the clock feeding the
SWT counter which is 32bits wide. On the s32g274-rb2, the clock has a
rate of 51MHz which result on 83 seconds maximum timeout.
The timeout can be specified via the device tree with the usual
existing bindings 'timeout-sec' or via the module param timeout.
The watchdog can be loaded with the 'nowayout' option, preventing the
watchdog to be stopped.
The watchdog can be started at boot time with the 'early-enable'
option, thus letting the watchdog framework to service the watchdog
counter.
The watchdog support the magic character to stop when the userspace
releases the device.
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Alexandru-Catalin Ionita <alexandru-catalin.ionita@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410082616.1855860-3-daniel.lezcano@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Describe the Software Watchdog Timer available on the S32G platforms.
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410082616.1855860-2-daniel.lezcano@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Correct kerneldoc syntax or drop kerneldoc entirely for function
comments not being kerneldoc to fix warnings like:
pretimeout_noop.c:19: warning: Function parameter or struct member 'wdd' not described in 'pretimeout_noop'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250406203531.61322-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Device can be unbound or probe can fail, so driver must also release
memory for the wakeup source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250406203531.61322-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250404123941.362620-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/watchdog/cros_ec_wdt.c:29:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/Z-WG6_uhWsy_FCq3@kspp
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
We have to wait at least the minimium time for the watchdog window
(TWDMIN) before writings to the wdt register after the
watchdog is activated.
Otherwise the chip will assert TWD_ERROR and power down to reset mode.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-4-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
If the watchog is started by the bootloader, we do not want the watchdog
to be disabled.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-3-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Introduce the `timeout` module parameter and pass it to
watchdog_init_timeout(). If the parameter is not set or contains an
invalid value, fallback on the `timeout-secs` devicetree property value.
If none of the above is valid, go for the old default value.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-2-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add nowayout module parameter for not stopping the
watchdog when userspace application quits.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-1-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull, on target to be quiet, just one amdgpu, one
edid and a few minor xe fixes.
edid:
- fix HDR metadata reset
amdgpu:
- Hibernate fix
xe:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs"
* tag 'drm-fixes-2025-05-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/ptl: Update the PTL pci id table
drm/xe: Use xe_mmio_read32() to read mtcfg register
drm/xe/mocs: Check if all domains awake
Revert "drm/amd: Keep display off while going into S4"
drm/edid: fixed the bug that hdr metadata was not reset
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/uixp5cq7emz32lmwwvq4vbujppugfozhyj3cm2aqzx4lcg7ivn@m2khvf4kvz5p
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-05-22:
amdgpu:
- Hibernate fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250522183941.9606-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
edid:
- fix HDR metadata reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522113902.GA7000@localhost.localdomain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"This fixes a coding mistake in the x86_pkg_temp_thermal Intel thermal
driver that was introduced by an incorrect conflict resolution during
a merge (Zhang Rui)"
* tag 'thermal-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: x86_pkg_temp_thermal: Fix bogus trip temperature
|
|
Pull smb server fixes from Steve French:
- Fix for rename regression due to the recent VFS lookup changes
- Fix write failure
- locking fix for oplock handling
* tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
ksmbd: fix rename failure
ksmbd: fix stream write failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- dell-wmi-sysman: Avoid buffer overflow in current_password_store()
- fujitsu-laptop: Support Lifebook S2110 hotkeys
- intel/pmc: Fix Arrow Lake U/H NPU PCI ID
- think-lmi: Fix attribute name usage for non-compliant items
- thinkpad_acpi: Ignore battery threshold change event notification
* tag 'platform-drivers-x86-v6.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/pmc: Fix Arrow Lake U/H NPU PCI ID
platform/x86: think-lmi: Fix attribute name usage for non-compliant items
platform/x86: thinkpad_acpi: Ignore battery threshold change event notification
platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store()
platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a small set of fixes for the blocking buffer lookup
conversion done earlier this cycle.
It adds a missing conversion in the getblk slowpath and a few minor
optimizations and cleanups"
* tag 'vfs-6.15-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
|
|
The ARL requires that the GMA and NPU devices both be in D3Hot in order
for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition
to the intel_pmc_core driver attempted to do this by switching them to D3
in the init and resume calls of the intel_pmc_core driver.
The problem is the ARL-H/U have a different NPU device and thus are not
being properly set and thus S0iX does not work properly in ARL-H/U. This
patch creates a new ARL-H specific device id that is correct and also
adds the D3 fixup to the suspend callback. This way if the PCI devies
drop from D3 to D0 after resume they can be corrected for the next
suspend. Thus there is no dropout in S0iX.
Fixes: bd820906ea9d ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver")
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Update to current bspec table.
Bspec: 72574
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://lore.kernel.org/r/20250520195749.371748-1-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 49c6dc74b5968885f421f9f1b45eb4890b955870)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The mtcfg register is a 32-bit register and should therefore be
accessed using xe_mmio_read32().
Other 3 changes per codestyle suggestion:
"
xe_mmio.c:83: CHECK: Alignment should match open parenthesis
xe_mmio.c:131: CHECK: Comparison to NULL could be written "!xe->mmio.regs"
xe_mmio.c:315: CHECK: line length of 103 exceeds 100 columns
"
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250513153010.3464767-1-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d2662cf8f44a68deb6c76ad9f1d9f29dbf7ba601)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Check if all domains are awake specially for
LNCF regs
Fixes: 298661cd9cea ("drm/xe: Fix MOCS debugfs LNCF readout")
Improvements-suggested-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250506142300.1865783-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit a383cf218ef8bb35d4c03958bd956573b65cf778)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Small stuff, main ones users will be interested in:
- Couple more casefolding fixes; we can now detect and repair
casefolded dirents in non-casefolded dir and vice versa
- Fix for massive write inflation with mmapped io, which hit certain
databases"
* tag 'bcachefs-2025-05-22' of git://evilpiepirate.org/bcachefs:
bcachefs: Check for casefolded dirents in non casefolded dirs
bcachefs: Fix bch2_dirent_create_snapshot() for casefolding
bcachefs: Fix casefold opt via xattr interface
bcachefs: mkwrite() now only dirties one page
bcachefs: fix extent_has_stripe_ptr()
bcachefs: Fix bch2_btree_path_traverse_cached() when paths realloced
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix error checking in genpd_dev_pm_attach_by_id()
Providers:
- renesas: Remove obsolete nullify checks for rcar domains"
* tag 'pmdomain-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id()
pmdomain: renesas: rcar: Remove obsolete nullify checks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci_am654: Fix MMC init failures on am62x boards
- sdhci-of-dwcmshc: Add PD workaround on RK3576 to avoid hang
* tag 'mmc-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: Add SDHCI_QUIRK2_SUPPRESS_V1P8_ENA quirk to am62 compatible
mmc: sdhci-of-dwcmshc: add PD workaround on RK3576
|
|
Pull block fixes from Jens Axboe:
- Fix for a regression with setting up loop on a file system
without ->write_iter()
- Fix for an nvme sysfs regression
* tag 'block-6.15-20250522' of git://git.kernel.dk/linux:
nvme: avoid creating multipath sysfs group under namespace path devices
loop: don't require ->write_iter for writable files in loop_configure
|
|
Pull io_uring fixes from Jens Axboe:
- Kill a duplicate function definition, which can cause linking issues
in certain .config configurations. Introduced in this cycle.
- Fix for a potential overflow CQE reordering issue if a re-schedule is
done during posting. Heading to stable.
- Fix for an issue with recv bundles, where certain conditions can lead
to gaps in the buffers, where a contiguous buffer range was expected.
Heading to stable.
* tag 'io_uring-6.15-20250522' of git://git.kernel.dk/linux:
io_uring/net: only retry recv bundle for a full transfer
io_uring: fix overflow resched cqe reordering
io_uring/cmd: axe duplicate io_uring_cmd_import_fixed_vec() declaration
|
|
Pull smb client fixes from Steve French:
- Two fixes for use after free in readdir code paths
* tag '6.15-rc8-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Reset all search buffer pointers when releasing buffer
smb: client: Fix use-after-free in cifs_fill_dirent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is somewhat larger than what I hoped for, with a few PRs from
subsystems and follow-ups for the recent netdev locking changes,
anyhow there are no known pending regressions.
Including fixes from bluetooth, ipsec and CAN.
Current release - regressions:
- eth: team: grab team lock during team_change_rx_flags
- eth: bnxt_en: fix netdev locking in ULP IRQ functions
Current release - new code bugs:
- xfrm: ipcomp: fix truesize computation on receive
- eth: airoha: fix page recycling in airoha_qdma_rx_process()
Previous releases - regressions:
- sched: hfsc: fix qlen accounting bug when using peek in
hfsc_enqueue()
- mr: consolidate the ipmr_can_free_table() checks.
- bridge: netfilter: fix forwarding of fragmented packets
- xsk: bring back busy polling support in XDP_COPY
- can:
- add missing rcu read protection for procfs content
- kvaser_pciefd: force IRQ edge in case of nested IRQ
Previous releases - always broken:
- xfrm: espintcp: remove encap socket caching to avoid reference leak
- bluetooth: use skb_pull to avoid unsafe access in QCA dump handling
- eth: idpf:
- fix null-ptr-deref in idpf_features_check
- fix idpf_vport_splitq_napi_poll()
- eth: hibmcge: fix wrong ndo.open() after reset fail issue"
* tag 'net-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-af: Fix APR entry mapping based on APR_LMT_CFG
octeontx2-af: Set LMT_ENA bit for APR table entries
net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done
octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vf
selftests/tc-testing: Add an HFSC qlen accounting test
sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()
idpf: fix idpf_vport_splitq_napi_poll()
net: hibmcge: fix wrong ndo.open() after reset fail issue.
net: hibmcge: fix incorrect statistics update issue
xsk: Bring back busy polling support in XDP_COPY
can: slcan: allow reception of short error messages
net: lan743x: Restore SGMII CTRL register on resume
bnxt_en: Fix netdev locking in ULP IRQ functions
MAINTAINERS: Drop myself to reviewer for ravb driver
net: dwmac-sun8i: Use parsed internal PHY address instead of 1
net: ethernet: ti: am65-cpsw: Lower random mac address error print to info
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
idpf: fix null-ptr-deref in idpf_features_check
...
|
|
commit 68bfdc8dc0a1a ("drm/amd: Keep display off while going into S4")
attempted to keep displays off during the S4 sequence by not resuming
display IP. This however leads to hangs because DRM clients such as the
console can try to access registers and cause a hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4155
Fixes: 68bfdc8dc0a1a ("drm/amd: Keep display off while going into S4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250522141328.115095-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e485502c37b097b0bd773baa7e2741bf7bd2909a)
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"This deals with a crash in the Qualcomm pin controller GPIO
parts when using hogs.
The first patch to gpiolib makes gpiochip_line_is_valid()
NULL-tolerant.
The second patch fixes the actual problem"
* tag 'pinctrl-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: switch to devm_register_sys_off_handler()
gpiolib: don't crash on enabling GPIO HOG pins
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.15 final. It became slightly a
higher amount than expected, but all look easy and safe to apply:
- A fix for PCM core race spotted by fuzzing
- ASoC topology fix for single DAI link
- UAF fix for ASoC SOF Intel HD-audio at reloading
- ASoC SOF Intel and Mediatek fixes
- Trivial HD-audio quirks as usual"
* tag 'sound-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Add new HP ZBook laptop with micmute led fixup
ALSA: hda/realtek: Add support for HP Agusta using CS35L41 HDA
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ASP10
ALSA: hda/realtek - restore auto-mute mode for Dell Chrome platform
ALSA: pcm: Fix race of buffer access at PCM OSS layer
ASoC: SOF: Intel: hda: Fix UAF when reloading module
ASoc: SOF: topology: connect DAI to a single DAI link
ASoC: SOF: Intel: hda-bus: Use PIO mode on ACE2+ platforms
ASoC: SOF: ipc4-pcm: Delay reporting is only supported for playback direction
ASoC: SOF: ipc4-control: Use SOF_CTRL_CMD_BINARY as numid for bytes_ext
ASoC: mediatek: mt8188-mt6359: Depend on MT6359_ACCDET set or disabled
ASoC: mediatek: mt8188-mt6359: select CONFIG_SND_SOC_MT6359_ACCDET
|
|
Pull NVMe fix from Christoph:
"nvme fixes for Linux 6.15
- do not create the newly added multipath sysfs group for
non-multipath nodes (Nilay Shroff)"
* tag 'nvme-6.15-2025-05-22' of git://git.infradead.org/nvme:
nvme: avoid creating multipath sysfs group under namespace path devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-22
this is a pull request of 4 patches for net/main.
The first 3 patches are by Axel Forsman and fix a ISR race condition
in the kvaser_pciefd driver.
The last patch is by Carlos Sanchez and fixes the reception of short
error messages in the slcan driver.
* tag 'linux-can-fixes-for-6.15-20250521' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: slcan: allow reception of short error messages
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
====================
Link: https://patch.msgid.link/20250522082344.490913-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Geetha sowjanya says:
====================
octeontx2-af: APR Mapping Fixes
This patch series includes fixes related to APR (LMT)
mapping and debugfs support.
Changes include:
Patch 1:Set LMT_ENA bit for APR table entries.
Enables the LMT line for each PF/VF by setting
the LMT_ENA bit in the APR_LMT_MAP_ENTRY_S
structure.
Patch-2:Fix APR entry in debugfs
The APR table was previously mapped using a fixed size,
which could lead to incorrect mappings when the number
of PFs and VFs differed from the assumed value.
This patch updates the logic to calculate the APR table
size dynamically, based on values from the APR_LMT_CFG
register, ensuring correct representation in debugfs.
====================
Link: https://patch.msgid.link/20250521060834.19780-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current implementation maps the APR table using a fixed size,
which can lead to incorrect mapping when the number of PFs and VFs
varies.
This patch corrects the mapping by calculating the APR table
size dynamically based on the values configured in the
APR_LMT_CFG register, ensuring accurate representation
of APR entries in debugfs.
Fixes: 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://patch.msgid.link/20250521060834.19780-3-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch enables the LMT line for a PF/VF by setting the
LMT_ENA bit in the APR_LMT_MAP_ENTRY_S structure.
Additionally, it simplifies the logic for calculating the
LMTST table index by consistently using the maximum
number of hw supported VFs (i.e., 256).
Fixes: 873a1e3d207a ("octeontx2-af: cn10k: Setting up lmtst map table").
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521060834.19780-2-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-05-21
1) Fix some missing kfree_skb in the error paths of espintcp.
From Sabrina Dubroca.
2) Fix a reference leak in espintcp.
From Sabrina Dubroca.
3) Fix UDP GRO handling for ESPINUDP.
From Tobias Brunner.
4) Fix ipcomp truesize computation on the receive path.
From Sabrina Dubroca.
5) Sanitize marks before policy/state insertation.
From Paul Chaignon.
* tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Sanitize marks before insert
xfrm: ipcomp: fix truesize computation on receive
xfrm: Fix UDP GRO handling for some corner cases
espintcp: remove encap socket caching to avoid reference leak
espintcp: fix skb leaks
====================
Link: https://patch.msgid.link/20250521054348.4057269-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzbot reported a slab-use-after-free with the following call trace:
==================================================================
BUG: KASAN: slab-use-after-free in tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
Read of size 8 at addr ffff88807a733000 by task kworker/1:0/25
Call Trace:
kasan_report+0xd9/0x110 mm/kasan/report.c:601
tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
crypto_request_complete include/crypto/algapi.h:266
aead_request_complete include/crypto/internal/aead.h:85
cryptd_aead_crypt+0x3b8/0x750 crypto/cryptd.c:772
crypto_request_complete include/crypto/algapi.h:266
cryptd_queue_worker+0x131/0x200 crypto/cryptd.c:181
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
Allocated by task 8355:
kzalloc_noprof include/linux/slab.h:778
tipc_crypto_start+0xcc/0x9e0 net/tipc/crypto.c:1466
tipc_init_net+0x2dd/0x430 net/tipc/core.c:72
ops_init+0xb9/0x650 net/core/net_namespace.c:139
setup_net+0x435/0xb40 net/core/net_namespace.c:343
copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508
create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x419/0x970 kernel/fork.c:3323
__do_sys_unshare kernel/fork.c:3394
Freed by task 63:
kfree+0x12a/0x3b0 mm/slub.c:4557
tipc_crypto_stop+0x23c/0x500 net/tipc/crypto.c:1539
tipc_exit_net+0x8c/0x110 net/tipc/core.c:119
ops_exit_list+0xb0/0x180 net/core/net_namespace.c:173
cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
After freed the tipc_crypto tx by delete namespace, tipc_aead_encrypt_done
may still visit it in cryptd_queue_worker workqueue.
I reproduce this issue by:
ip netns add ns1
ip link add veth1 type veth peer name veth2
ip link set veth1 netns ns1
ip netns exec ns1 tipc bearer enable media eth dev veth1
ip netns exec ns1 tipc node set key this_is_a_master_key master
ip netns exec ns1 tipc bearer disable media eth dev veth1
ip netns del ns1
The key of reproduction is that, simd_aead_encrypt is interrupted, leading
to crypto_simd_usable() return false. Thus, the cryptd_queue_worker is
triggered, and the tipc_crypto tx will be visited.
tipc_disc_timeout
tipc_bearer_xmit_skb
tipc_crypto_xmit
tipc_aead_encrypt
crypto_aead_encrypt
// encrypt()
simd_aead_encrypt
// crypto_simd_usable() is false
child = &ctx->cryptd_tfm->base;
simd_aead_encrypt
crypto_aead_encrypt
// encrypt()
cryptd_aead_encrypt_enqueue
cryptd_aead_enqueue
cryptd_enqueue_request
// trigger cryptd_queue_worker
queue_work_on(smp_processor_id(), cryptd_wq, &cpu_queue->work)
Fix this by holding net reference count before encrypt.
Reported-by: syzbot+55c12726619ff85ce1f6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=55c12726619ff85ce1f6
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20250520101404.1341730-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Priority flow control is not supported for LBK and SDP vf. This patch
adds support to not add dcbnl_ops for LBK and SDP vf.
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519072658.2960851-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cong Wang says:
====================
net_sched: Fix HFSC qlen/backlog accounting bug and add selftest
This series addresses a long-standing bug in the HFSC qdisc where queue length
and backlog accounting could become inconsistent if a packet is dropped during
a peek-induced dequeue operation, and adds a corresponding selftest to tc-testing.
====================
Link: https://patch.msgid.link/20250518222038.58538-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test reproduces a scenario where HFSC queue length and backlog accounting
can become inconsistent when a peek operation triggers a dequeue and possible
drop before the parent qdisc updates its counters. The test sets up a DRR root
qdisc with an HFSC class, netem, and blackhole children, and uses Scapy to
inject a packet. It helps to verify that HFSC correctly tracks qlen and backlog
even when packets are dropped during peek-induced dequeue.
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-3-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the
child qdisc's peek() operation before incrementing sch->q.qlen and
sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may
trigger an immediate dequeue and potential packet drop. In such cases,
qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog
have not yet been updated, leading to inconsistent queue accounting. This
can leave an empty HFSC class in the active list, causing further
consequences like use-after-free.
This patch fixes the bug by moving the increment of sch->q.qlen and
sch->qstats.backlog before the call to the child qdisc's peek() operation.
This ensures that queue length and backlog are always accurate when packet
drops or dequeues are triggered during the peek.
Fixes: 12d0ad3be9c3 ("net/sched/sch_hfsc.c: handle corner cases where head may change invalidating calculated deadline")
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-2-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
idpf_vport_splitq_napi_poll() can incorrectly return @budget
after napi_complete_done() has been called.
This violates NAPI rules, because after napi_complete_done(),
current thread lost napi ownership.
Move the test against POLL_MODE before the napi_complete_done().
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Reported-by: Peter Newman <peternewman@google.com>
Closes: https://lore.kernel.org/netdev/20250520121908.1805732-1-edumazet@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Link: https://patch.msgid.link/20250520124030.1983936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The list_first_entry() macro never returns NULL. If the list is
empty then it returns an invalid pointer. Use list_first_entry_or_null()
to check if the list is empty.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505080231.7OXwq4Te-lkp@intel.com/
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
I found that rename fails after cifs mount due to update of
lookup_one_qstr_excl().
mv a/c b/
mv: cannot move 'a/c' to 'b/c': No such file or directory
In order to rename to a new name regardless of whether the dentry is
negative, we need to get the dentry through lookup_one_qstr_excl().
So It will not return error if the name doesn't exist.
Fixes: 204a575e91f3 ("VFS: add common error checks to lookup_one_qstr_excl()")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If a shorter than assumed transfer was seen, a partial buffer will have
been filled. For that case it isn't sane to attempt to fill more into
the bundle before posting a completion, as that will cause a gap in
the received data.
Check if the iterator has hit zero and only allow to continue a bundle
operation if that is the case.
Also ensure that for putting finished buffers, only the current transfer
is accounted. Otherwise too many buffers may be put for a short transfer.
Link: https://github.com/axboe/liburing/issues/1409
Cc: stable@vger.kernel.org
Fixes: 7c71a0af81ba ("io_uring/net: improve recv bundles")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes for some SoC clk drivers:
- Define the gate clk for the OTG PHY on Rockchip RK3576 so the nvmem
driver actually works
- Initialize clk_hw_onecell_data::num before accessing the 'hws'
array to keep UBSAN happy
- Fix a perf degradation on the Allwinner D1 MMC clk that was making
things half bad
- Fix the Allwinner SNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro to have
proper order of arguments"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: d1: Add missing divider for MMC mod clocks
clk: s2mps11: initialise clk_hw_onecell_data::num before accessing ::hws[] in probe()
clk: sunxi-ng: fix order of arguments in clock macro
clk: rockchip: rk3576: define clk_otp_phy_g
|
|
Check for mismatches between casefold dirents and casefold directories.
A mismatch will cause lookups to fail, as we'll be doing the lookup with
the casefolded name, which won't match the non-casefolded dirent, and
vice versa.
Reported-by: Christopher Snowhill <chris@kode54.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
