summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-11-28ARM: dts: sun7i: Split the RTS and CTS pins out of the UART nodesMaxime Ripard3-5/+15
Some UART nodes on the A20 DTSI do not share the same pattern that we use everywhere else, with the RTS and CTS pins split away from the TX and RX pins. Make those pin groups consistent with the rest of our DT. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Change pinctrl nodes to avoid warningMaxime Ripard29-236/+236
All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Remove gpio-keys warningsMaxime Ripard1-6/+7
Some gpio-keys definitions in our DTs were having buttons defined with a unit-address and that would generate a DTC warning. Change the buttons node names to remove the warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Change LRADC node names to avoid warningsMaxime Ripard3-16/+16
One of the usage of the LRADC is to implement buttons. The bindings define that we should have one subnode per button, with their associated voltage as a property. However, there was no reg property but we still used the voltage associated to the button as the unit-address, which eventually generated warnings in DTC. Rename the node names to avoid those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Remove card detect pull-upMaxime Ripard8-67/+9
Boards usually have an external pull-up on the card-detect signal, so there's no need to add another one. This also removes a DTC warning. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Remove all useless pinctrl nodesMaxime Ripard20-370/+0
The gpio pinctrl nodes are redundant and as such useless most of the times. Since they will also generate warnings in DTC, we can simply remove most of them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Change framebuffer node names to avoid warningsMaxime Ripard1-3/+3
The simple-framebuffer nodes have a unit address, but no reg property which generates a warning when compiling it with DTC. Change the simple-framebuffer node names so that there is no warnings on this anymore. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Change clock node names to avoid warningsMaxime Ripard1-4/+4
Our oscillators clock names have a unit address, but no reg property, which generates a warning in DTC. Change these names to remove those unit addresses. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Remove SoC node unit-name to avoid warningsMaxime Ripard1-1/+1
Our main node for all the in-SoC controllers used to have a unit name. The unit-name, in addition to being actually false, would not match any reg property, which generates a warning. Remove it in order to remove those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun7i: Remove skeleton and memory to avoid warningsMaxime Ripard1-6/+2
Using skeleton.dtsi will create a memory node that will generate a warning in DTC. However, that node will be created by the bootloader, so we can just remove it entirely in order to remove that warning. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Provide default muxing for relevant controllersMaxime Ripard11-44/+10
The I2C and MMC controllers have only one muxing option in the SoC. In such a case, we can just move the muxing into the DTSI, and remove it from the DTS. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: colombus: Change i2c node name to avoid warningsMaxime Ripard1-1/+1
Our I2C GPIO bus node name has a unit address, but no reg property, which generates a warning in DTC. Change the name to remove that unit address. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Remove underscores from nodes namesMaxime Ripard3-3/+3
Some GPIO pinctrl nodes cannot be easily removed, because they would also change the pin configuration, for example to add a pull resistor or change the current delivered by the pin. Those nodes still have underscores and unit-addresses in their node names in our DTs, so adjust their name to remove the warnings. Use that occasion to also fix some poorly chosen node-names. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Change pinctrl nodes to avoid warningMaxime Ripard15-68/+68
All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Remove redundant MMC pinmux tuningMaxime Ripard4-21/+0
Some boards override the MMC pin muxing settings in order to enable the pull-ups and change the drive strength to a value higher than the default. While this was needed in the earlier days, this is now the default setting for those pins, and therefore we don't need those board-specific settings anymore. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Remove card detect pull-upMaxime Ripard10-85/+10
Boards usually have an external pull-up on the card-detect signal, so there's no need to add another one. This also removes a DTC warning. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Remove all useless pinctrl nodesMaxime Ripard9-104/+3
The gpio pinctrl nodes are redundant and as such useless most of the times. Since they will also generate warnings in DTC, we can simply remove most of them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Change LRADC node names to avoid warningsMaxime Ripard4-8/+8
One of the usage of the LRADC is to implement buttons. The bindings define that we should have one subnode per button, with their associated voltage as a property. However, there was no reg property but we still used the voltage associated to the button as the unit-address, which eventually generated warnings in DTC. Rename the node names to avoid those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Remove SoC node unit-name to avoid warningsMaxime Ripard1-1/+1
Our main node for all the in-SoC controllers used to have a unit name. The unit-name, in addition to being actually false, would not match any reg property, which generates a warning. Remove it in order to remove those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Change clock node names to avoid warningsMaxime Ripard1-4/+4
Our oscillators clock names have a unit address, but no reg property, which generates a warning in DTC. Change these names to remove those unit addresses. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Change framebuffer node names to avoid warningsMaxime Ripard1-2/+2
The simple-framebuffer nodes have a unit address, but no reg property which generates a warning when compiling it with DTC. Change the simple-framebuffer node names so that there is no warnings on this anymore. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun6i: Remove skeleton and memory to avoid warningsMaxime Ripard1-6/+2
Using skeleton.dtsi will create a memory node that will generate a warning in DTC. However, that node will be created by the bootloader, so we can just remove it entirely in order to remove that warning. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Provide default muxing for relevant controllersMaxime Ripard16-94/+13
The I2C's, MMC0 and MMC1 controllers have only one muxing option in the SoC. In such a case, we can just move the muxing into the DTSI, and remove it from the DTS. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: A10s: Remove empty SRAM nodeMaxime Ripard1-3/+0
The SRAM node in the A10s DTSI is empty, remove it. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sunxi: Change LRADC node names to avoid warningsMaxime Ripard1-2/+2
One of the usage of the LRADC is to implement buttons. The bindings define that we should have one subnode per button, with their associated voltage as a property. However, there was no reg property but we still used the voltage associated to the button as the unit-address, which eventually generated warnings in DTC. Rename the node names to avoid those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove underscores from nodes namesMaxime Ripard11-21/+20
Some GPIO pinctrl nodes cannot be easily removed, because they would also change the pin configuration, for example to add a pull resistor or change the current delivered by the pin. Those nodes still have underscores and unit-addresses in their node names in our DTs, so adjust their name to remove the warnings. Use that occasion to also fix some poorly chosen node-names. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sunxi: Remove the CMA node labelMaxime Ripard4-4/+4
There's no phandle pointing to the CMA pool, so it's label is unnecessary. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sunxi: Change default CMA pool node nameMaxime Ripard5-5/+5
The CMA node has a unit address, but no reg property which generates a warning in DTC. Change the node name to reflect its usage and drop the unit address. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: a10s: Fix HDMI output DTC warningMaxime Ripard1-2/+0
Our HDMI output endpoint on the A10s DTSI has a warning under DTC: "graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary". Fix this by removing those properties. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Change pinctrl nodes to avoid warningMaxime Ripard19-119/+127
All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove card detect pull-upMaxime Ripard11-88/+12
Boards usually have an external pull-up on the card-detect signal, so there's no need to add another one. This also removes a DTC warning. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove all useless pinctrl nodesMaxime Ripard13-160/+2
The gpio pinctrl nodes are redundant and as such useless most of the times. Since they will also generate warnings in DTC, we can simply remove most of them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Change LRADC node names to avoid warningsMaxime Ripard6-22/+22
One of the usage of the LRADC is to implement buttons. The bindings define that we should have one subnode per button, with their associated voltage as a property. However, there was no reg property but we still used the voltage associated to the button as the unit-address, which eventually generated warnings in DTC. Rename the node names to avoid those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove redundant interrupt-controllerMaxime Ripard2-4/+0
The interrupt-parent property is set in sun5i.dtsi, so there's no need to repeat it. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove SoC node unit-name to avoid warningsMaxime Ripard4-4/+4
Our main node for all the in-SoC controllers used to have a unit name. The unit-name, in addition to being actually false, would not match any reg property, which generates a warning. Remove it in order to remove those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove skeleton to avoid warningsMaxime Ripard3-6/+2
Using skeleton.dtsi will create a memory node that will generate a warning in DTC. However, that node will be created by the bootloader, so we can just remove it entirely in order to remove that warning. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Change clock node names to avoid warningsMaxime Ripard1-2/+2
Our oscillators clock names have a unit address, but no reg property, which generates a warning in DTC. Change these names to remove those unit addresses. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Change framebuffer node names to avoid warningsMaxime Ripard2-3/+3
The simple-framebuffer nodes have a unit address, but no reg property which generates a warning when compiling it with DTC. Change the simple-framebuffer node names so that there is no warnings on this anymore. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun4i: Fix HDMI output DTC warningMaxime Ripard1-2/+0
Our HDMI output endpoint on the A10 DTSI has a warning under DTC: "graph node has single child node 'endpoint', #address-cells/#size-cells are not necessary". Fix this by removing those properties. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun4i: Fix gpio-keys warningMaxime Ripard2-4/+0
Fix the 'unnecessary #address-cells/#size-cells without "ranges" or child "reg" property' DTC warning for the gpio-keys DT node on A10 boards. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-27ARM: dts: sun7i: set proper lradc vref on OLinuXino Lime2Olliver Schinagl1-0/+4
The lradc's analog reference voltage is set to 3.0 volt in the hardware. This is more or less set in copper for at least lradc0. Set the property in the dts to ensure the lradc is referenced properly. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-22ARM: dts: sun8i: Add board dts file for t3-cqa3t-bv3.Hao Zhang2-0/+227
The T3/R40/V40 using the same sdk and config file in allwinner sdk, it seem they are the same SOC just with different name, so compatible with R40. The t3-cqa3t-bv3 based on Allwinner T3 SoC, it has various connectors, leds, buttons, and sell on: https://item.taobao.com/item.htm?spm=2013.1.w4023-4203040713.25.62704cce7UCgLS&id=557154455330 It features: - X-Powers AXP221s PMIC connected to i2c0 - 1/2 GB DDR3 DRAM - 8 GB eMMC - 2x USB 2.0 hosts - 1x USB 2.0 OTG - 2 LVDS connectors - 24 bit RGB LCD connector - HDMI output - DVP camera interface (support 500w cmos camera) - GPIO connectors - 5 TTL uarts and 2 RS232 uarts - 1 RS485 connector - support i2c capacitive tp and usb infrared tp - boot control, reset and user buttons - 3.5mm headphone and 3.5mm mic jack - 100M RJ45 - micro SD card slot - DC power jack - RCT power slot - 1 CVBS TVIN - 1 CVBS TVOUT - 2 customer leds - 1 buzzer - 1 minipcie - I2C output - SPI output - PCM output - wifi and bt connector reserved. Board info can find here: https://github.com/Axl-zhang/Allwinner-V40-T3-R40-manual Signed-off-by: Hao Zhang <hao5781286@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-22Documentation: ARM: sunxi: Add Allwinner SoC T3.Hao Zhang1-1/+2
Add Allwinner SoC T3 document and fix format. Signed-off-by: Hao Zhang <hao5781286@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-19ARM: dts: sunxi: Add all CPUs in cooling mapsViresh Kumar3-11/+21
Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05ARM: dts: sun8i-a83t-tbs-a711: Change MMC0 bus-width to 4Ondrej Jirman1-0/+1
The actual hardware has 4 data lines. Use them. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05Linux 4.20-rc1v4.20-rc1Linus Torvalds1-2/+2
2018-11-05Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds25-292/+2418
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
2018-11-04Merge tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds5-40/+17
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
2018-11-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds7-0/+432
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-04Merge tag 'ntb-4.20' of git://github.com/jonmason/ntbLinus Torvalds6-110/+429
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 19:12:43 +0300